wlcore: Change read/write ops to return errors

While bus operations may fail, either due to HW or FW issues, these are
never propagated to higher layers. As a result, the core driver has no
way of knowing that the operations failed, and will only recover if high
level logic requires it (e.g. no command completion).

Change read/write bus operations to return errors to let higher layer
functionality handle these.
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

drivers/net/wireless/ti/wlcore/sdio.c

@@ -71,8 +71,8 @@ static void wl1271_sdio_set_block_size(struct device *child,
 	sdio_release_host(func);
 }
 
-static void wl12xx_sdio_raw_read(struct device *child, int addr, void *buf,
-				 size_t len, bool fixed)
+static int wl12xx_sdio_raw_read(struct device *child, int addr, void *buf,
+				size_t len, bool fixed)
 {
 	int ret;
 	struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
@@ -103,12 +103,14 @@ static void wl12xx_sdio_raw_read(struct device *child, int addr, void *buf,
 
 	sdio_release_host(func);
 
-	if (ret)
+	if (WARN_ON(ret))
 		dev_err(child->parent, "sdio read failed (%d)\n", ret);
+
+	return ret;
 }
 
-static void wl12xx_sdio_raw_write(struct device *child, int addr, void *buf,
-				  size_t len, bool fixed)
+static int wl12xx_sdio_raw_write(struct device *child, int addr, void *buf,
+				 size_t len, bool fixed)
 {
 	int ret;
 	struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
@@ -139,8 +141,10 @@ static void wl12xx_sdio_raw_write(struct device *child, int addr, void *buf,
 
 	sdio_release_host(func);
 
-	if (ret)
+	if (WARN_ON(ret))
 		dev_err(child->parent, "sdio write failed (%d)\n", ret);
+
+	return ret;
 }
 
 static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue)

drivers/net/wireless/ti/wlcore/spi.c

@@ -193,8 +193,8 @@ static int wl12xx_spi_read_busy(struct device *child)
 	return -ETIMEDOUT;
 }
 
-static void wl12xx_spi_raw_read(struct device *child, int addr, void *buf,
-				size_t len, bool fixed)
+static int wl12xx_spi_raw_read(struct device *child, int addr, void *buf,
+			       size_t len, bool fixed)
 {
 	struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
 	struct wl1271 *wl = dev_get_drvdata(child);
@@ -238,7 +238,7 @@ static void wl12xx_spi_raw_read(struct device *child, int addr, void *buf,
 		if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1) &&
 		    wl12xx_spi_read_busy(child)) {
 			memset(buf, 0, chunk_len);
-			return;
+			return 0;
 		}
 
 		spi_message_init(&m);
@@ -256,10 +256,12 @@ static void wl12xx_spi_raw_read(struct device *child, int addr, void *buf,
 		buf += chunk_len;
 		len -= chunk_len;
 	}
+
+	return 0;
 }
 
-static void wl12xx_spi_raw_write(struct device *child, int addr, void *buf,
-				 size_t len, bool fixed)
+static int wl12xx_spi_raw_write(struct device *child, int addr, void *buf,
+				size_t len, bool fixed)
 {
 	struct wl12xx_spi_glue *glue = dev_get_drvdata(child->parent);
 	struct spi_transfer t[2 * WSPI_MAX_NUM_OF_CHUNKS];
@@ -304,6 +306,8 @@ static void wl12xx_spi_raw_write(struct device *child, int addr, void *buf,
 	}
 
 	spi_sync(to_spi_device(glue->dev), &m);
+
+	return 0;
 }
 
 static struct wl1271_if_operations spi_ops = {

drivers/net/wireless/ti/wlcore/wlcore_i.h

@@ -209,9 +209,9 @@ struct wl1271_scan {
 };
 
 struct wl1271_if_operations {
-	void (*read)(struct device *child, int addr, void *buf, size_t len,
-		     bool fixed);
-	void (*write)(struct device *child, int addr, void *buf, size_t len,
+	int (*read)(struct device *child, int addr, void *buf, size_t len,
+		    bool fixed);
+	int (*write)(struct device *child, int addr, void *buf, size_t len,
 		     bool fixed);
 	void (*reset)(struct device *child);
 	void (*init)(struct device *child);