Input: remove aaed2000 keyboard driver

The only platform using this driver (mach-aaec2000) is no longer in
the kernel so remove the driver.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

drivers/input/keyboard/Kconfig

@@ -12,18 +12,6 @@ menuconfig INPUT_KEYBOARD
 
 if INPUT_KEYBOARD
 
-config KEYBOARD_AAED2000
-	tristate "AAED-2000 keyboard"
-	depends on MACH_AAED2000
-	select INPUT_POLLDEV
-	default y
-	help
-	  Say Y here to enable the keyboard on the Agilent AAED-2000
-	  development board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called aaed2000_kbd.
-
 config KEYBOARD_ADP5520
 	tristate "Keypad Support for ADP5520 PMIC"
 	depends on PMIC_ADP5520

drivers/input/keyboard/Makefile

@@ -4,7 +4,6 @@
 
 # Each configuration option enables a list of files.
 
-obj-$(CONFIG_KEYBOARD_AAED2000)		+= aaed2000_kbd.o
 obj-$(CONFIG_KEYBOARD_ADP5520)		+= adp5520-keys.o
 obj-$(CONFIG_KEYBOARD_ADP5588)		+= adp5588-keys.o
 obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o

drivers/input/keyboard/aaed2000_kbd.c

-/*
- *  Keyboard driver for the AAED-2000 dev board
- *
- *  Copyright (c) 2006 Nicolas Bellido Y Ortega
- *
- *  Based on corgikbd.c
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/input-polldev.h>
-#include <linux/interrupt.h>
-#include <linux/jiffies.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-
-#include <mach/hardware.h>
-#include <mach/aaed2000.h>
-
-#define KB_ROWS			12
-#define KB_COLS			8
-#define KB_ROWMASK(r)		(1 << (r))
-#define SCANCODE(r,c)		(((c) * KB_ROWS) + (r))
-#define NR_SCANCODES		(KB_COLS * KB_ROWS)
-
-#define SCAN_INTERVAL		(50) /* ms */
-#define KB_ACTIVATE_DELAY	(20) /* us */
-
-static unsigned char aaedkbd_keycode[NR_SCANCODES] = {
-	KEY_9, KEY_0, KEY_MINUS, KEY_EQUAL, KEY_BACKSPACE, 0, KEY_SPACE, KEY_KP6, 0, KEY_KPDOT, 0, 0,
-	KEY_K, KEY_M, KEY_O, KEY_DOT, KEY_SLASH, 0, KEY_F, 0, 0, 0, KEY_LEFTSHIFT, 0,
-	KEY_I, KEY_P, KEY_LEFTBRACE, KEY_RIGHTBRACE, KEY_BACKSLASH, 0, 0, 0, 0, 0, KEY_RIGHTSHIFT, 0,
-	KEY_8, KEY_L, KEY_SEMICOLON, KEY_APOSTROPHE, KEY_ENTER, 0, 0, 0, 0, 0, 0, 0,
-	KEY_J, KEY_H, KEY_B, KEY_KP8, KEY_KP4, 0, KEY_C, KEY_D, KEY_S, KEY_A, 0, KEY_CAPSLOCK,
-	KEY_Y, KEY_U, KEY_N, KEY_T, 0, 0, KEY_R, KEY_E, KEY_W, KEY_Q, 0, KEY_TAB,
-	KEY_7, KEY_6, KEY_G, 0, KEY_5, 0, KEY_4, KEY_3, KEY_2, KEY_1, 0, KEY_GRAVE,
-	0, 0, KEY_COMMA, 0, KEY_KP2, 0, KEY_V, KEY_LEFTALT, KEY_X, KEY_Z, 0, KEY_LEFTCTRL
-};
-
-struct aaedkbd {
-	unsigned char keycode[ARRAY_SIZE(aaedkbd_keycode)];
-	struct input_polled_dev *poll_dev;
-	int kbdscan_state[KB_COLS];
-	int kbdscan_count[KB_COLS];
-};
-
-#define KBDSCAN_STABLE_COUNT 2
-
-static void aaedkbd_report_col(struct aaedkbd *aaedkbd,
-				unsigned int col, unsigned int rowd)
-{
-	unsigned int scancode, pressed;
-	unsigned int row;
-
-	for (row = 0; row < KB_ROWS; row++) {
-		scancode = SCANCODE(row, col);
-		pressed = rowd & KB_ROWMASK(row);
-
-		input_report_key(aaedkbd->poll_dev->input,
-				 aaedkbd->keycode[scancode], pressed);
-	}
-}
-
-/* Scan the hardware keyboard and push any changes up through the input layer */
-static void aaedkbd_poll(struct input_polled_dev *dev)
-{
-	struct aaedkbd *aaedkbd = dev->private;
-	unsigned int col, rowd;
-
-	col = 0;
-	do {
-		AAEC_GPIO_KSCAN = col + 8;
-		udelay(KB_ACTIVATE_DELAY);
-		rowd = AAED_EXT_GPIO & AAED_EGPIO_KBD_SCAN;
-
-		if (rowd != aaedkbd->kbdscan_state[col]) {
-			aaedkbd->kbdscan_count[col] = 0;
-			aaedkbd->kbdscan_state[col] = rowd;
-		} else if (++aaedkbd->kbdscan_count[col] >= KBDSCAN_STABLE_COUNT) {
-			aaedkbd_report_col(aaedkbd, col, rowd);
-			col++;
-		}
-	} while (col < KB_COLS);
-
-	AAEC_GPIO_KSCAN = 0x07;
-	input_sync(dev->input);
-}
-
-static int __devinit aaedkbd_probe(struct platform_device *pdev)
-{
-	struct aaedkbd *aaedkbd;
-	struct input_polled_dev *poll_dev;
-	struct input_dev *input_dev;
-	int i;
-	int error;
-
-	aaedkbd = kzalloc(sizeof(struct aaedkbd), GFP_KERNEL);
-	poll_dev = input_allocate_polled_device();
-	if (!aaedkbd || !poll_dev) {
-		error = -ENOMEM;
-		goto fail;
-	}
-
-	platform_set_drvdata(pdev, aaedkbd);
-
-	aaedkbd->poll_dev = poll_dev;
-	memcpy(aaedkbd->keycode, aaedkbd_keycode, sizeof(aaedkbd->keycode));
-
-	poll_dev->private = aaedkbd;
-	poll_dev->poll = aaedkbd_poll;
-	poll_dev->poll_interval = SCAN_INTERVAL;
-
-	input_dev = poll_dev->input;
-	input_dev->name = "AAED-2000 Keyboard";
-	input_dev->phys = "aaedkbd/input0";
-	input_dev->id.bustype = BUS_HOST;
-	input_dev->id.vendor = 0x0001;
-	input_dev->id.product = 0x0001;
-	input_dev->id.version = 0x0100;
-	input_dev->dev.parent = &pdev->dev;
-
-	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
-	input_dev->keycode = aaedkbd->keycode;
-	input_dev->keycodesize = sizeof(unsigned char);
-	input_dev->keycodemax = ARRAY_SIZE(aaedkbd_keycode);
-
-	for (i = 0; i < ARRAY_SIZE(aaedkbd_keycode); i++)
-		set_bit(aaedkbd->keycode[i], input_dev->keybit);
-	clear_bit(0, input_dev->keybit);
-
-	error = input_register_polled_device(aaedkbd->poll_dev);
-	if (error)
-		goto fail;
-
-	return 0;
-
- fail:	kfree(aaedkbd);
-	input_free_polled_device(poll_dev);
-	return error;
-}
-
-static int __devexit aaedkbd_remove(struct platform_device *pdev)
-{
-	struct aaedkbd *aaedkbd = platform_get_drvdata(pdev);
-
-	input_unregister_polled_device(aaedkbd->poll_dev);
-	input_free_polled_device(aaedkbd->poll_dev);
-	kfree(aaedkbd);
-
-	return 0;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:aaed2000-keyboard");
-
-static struct platform_driver aaedkbd_driver = {
-	.probe		= aaedkbd_probe,
-	.remove		= __devexit_p(aaedkbd_remove),
-	.driver		= {
-		.name	= "aaed2000-keyboard",
-		.owner	= THIS_MODULE,
-	},
-};
-
-static int __init aaedkbd_init(void)
-{
-	return platform_driver_register(&aaedkbd_driver);
-}
-
-static void __exit aaedkbd_exit(void)
-{
-	platform_driver_unregister(&aaedkbd_driver);
-}
-
-module_init(aaedkbd_init);
-module_exit(aaedkbd_exit);
-
-MODULE_AUTHOR("Nicolas Bellido Y Ortega");
-MODULE_DESCRIPTION("AAED-2000 Keyboard Driver");
-MODULE_LICENSE("GPL v2");