Merge tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 updates from Martin Schwidefsky:

 - A larger update for the zcrypt / AP bus code:
    + Update two inline assemblies in the zcrypt driver to make gcc happy
    + Add a missing reply code for invalid special commands for zcrypt
    + Allow AP device reset to be triggered from user space
    + Split the AP scan function into smaller, more readable functions

 - Updates for vfio-ccw and vfio-ap
    + Add maintainers and reviewer for vfio-ccw
    + Include facility.h in vfio_ap_drv.c to avoid fragile include chain
    + Simplicy vfio-ccw state machine

 - Use the common code version of bust_spinlocks

 - Make use of the DEFINE_SHOW_ATTRIBUTE

 - Fix three incorrect file permissions in the DASD driver

 - Remove bit spin-lock from the PCI interrupt handler

 - Fix GFP_ATOMIC vs GFP_KERNEL in the PCI code

* tag 's390-4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/zcrypt: rework ap scan bus code
  s390/zcrypt: make sysfs reset attribute trigger queue reset
  s390/pci: fix sleeping in atomic during hotplug
  s390/pci: remove bit_lock usage in interrupt handler
  s390/drivers: fix proc/debugfs file permissions
  s390: convert to DEFINE_SHOW_ATTRIBUTE
  MAINTAINERS/vfio-ccw: add Farhan and Eric, make Halil Reviewer
  vfio: ccw: Merge BUSY and BOXED states
  s390: use common bust_spinlocks()
  s390/zcrypt: improve special ap message cmd handling
  s390/ap: rework assembler functions to use unions for in/out register variables
  s390: vfio-ap: include <asm/facility> for test_facility()

MAINTAINERS

@@ -13162,7 +13162,9 @@ F:	drivers/pci/hotplug/s390_pci_hpc.c
 
 S390 VFIO-CCW DRIVER
 M:	Cornelia Huck <cohuck@redhat.com>
-M:	Halil Pasic <pasic@linux.ibm.com>
+M:	Farhan Ali <alifm@linux.ibm.com>
+M:	Eric Farman <farman@linux.ibm.com>
+R:	Halil Pasic <pasic@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 L:	kvm@vger.kernel.org
 S:	Supported

arch/s390/include/asm/ap.h

@@ -221,16 +221,22 @@ static inline struct ap_queue_status ap_aqic(ap_qid_t qid,
 					     void *ind)
 {
 	register unsigned long reg0 asm ("0") = qid | (3UL << 24);
-	register struct ap_qirq_ctrl reg1_in asm ("1") = qirqctrl;
-	register struct ap_queue_status reg1_out asm ("1");
+	register union {
+		unsigned long value;
+		struct ap_qirq_ctrl qirqctrl;
+		struct ap_queue_status status;
+	} reg1 asm ("1");
 	register void *reg2 asm ("2") = ind;
 
+	reg1.qirqctrl = qirqctrl;
+
 	asm volatile(
 		".long 0xb2af0000"		/* PQAP(AQIC) */
-		: "=d" (reg1_out)
-		: "d" (reg0), "d" (reg1_in), "d" (reg2)
+		: "+d" (reg1)
+		: "d" (reg0), "d" (reg2)
 		: "cc");
-	return reg1_out;
+
+	return reg1.status;
 }
 
 /*
@@ -264,17 +270,21 @@ static inline struct ap_queue_status ap_qact(ap_qid_t qid, int ifbit,
 {
 	register unsigned long reg0 asm ("0") = qid | (5UL << 24)
 		| ((ifbit & 0x01) << 22);
-	register unsigned long reg1_in asm ("1") = apinfo->val;
-	register struct ap_queue_status reg1_out asm ("1");
+	register union {
+		unsigned long value;
+		struct ap_queue_status status;
+	} reg1 asm ("1");
 	register unsigned long reg2 asm ("2");
 
+	reg1.value = apinfo->val;
+
 	asm volatile(
 		".long 0xb2af0000"		/* PQAP(QACT) */
-		: "+d" (reg1_in), "=d" (reg1_out), "=d" (reg2)
+		: "+d" (reg1), "=d" (reg2)
 		: "d" (reg0)
 		: "cc");
 	apinfo->val = reg2;
-	return reg1_out;
+	return reg1.status;
 }
 
 /**

arch/s390/include/uapi/asm/zcrypt.h

@@ -150,8 +150,8 @@ struct ica_xcRB {
  * @cprb_len:		CPRB header length [0x0020]
  * @cprb_ver_id:	CPRB version id.   [0x04]
  * @pad_000:		Alignment pad bytes
- * @flags:		Admin cmd [0x80] or functional cmd [0x00]
- * @func_id:		Function id / subtype [0x5434]
+ * @flags:		Admin bit [0x80], Special bit [0x20]
+ * @func_id:		Function id / subtype [0x5434] "T4"
  * @source_id:		Source id [originator id]
  * @target_id:		Target id [usage/ctrl domain id]
  * @ret_code:		Return code

arch/s390/mm/fault.c

@@ -81,30 +81,6 @@ static inline int notify_page_fault(struct pt_regs *regs)
 	return ret;
 }
 
-
-/*
- * Unlock any spinlocks which will prevent us from getting the
- * message out.
- */
-void bust_spinlocks(int yes)
-{
-	if (yes) {
-		oops_in_progress = 1;
-	} else {
-		int loglevel_save = console_loglevel;
-		console_unblank();
-		oops_in_progress = 0;
-		/*
-		 * OK, the message is on the console.  Now we call printk()
-		 * without oops_in_progress set so that printk will give klogd
-		 * a poke.  Hold onto your hats...
-		 */
-		console_loglevel = 15;
-		printk(" ");
-		console_loglevel = loglevel_save;
-	}
-}
-
 /*
  * Find out which address space caused the exception.
  * Access register mode is impossible, ignore space == 3.

arch/s390/pci/pci.c

@@ -382,9 +382,7 @@ static void zpci_irq_handler(struct airq_struct *airq)
 			if (ai == -1UL)
 				break;
 			inc_irq_stat(IRQIO_MSI);
-			airq_iv_lock(aibv, ai);
 			generic_handle_irq(airq_iv_get_data(aibv, ai));
-			airq_iv_unlock(aibv, ai);
 		}
 	}
 }
@@ -410,7 +408,7 @@ int arch_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 	zdev->aisb = aisb;
 
 	/* Create adapter interrupt vector */
-	zdev->aibv = airq_iv_create(msi_vecs, AIRQ_IV_DATA | AIRQ_IV_BITLOCK);
+	zdev->aibv = airq_iv_create(msi_vecs, AIRQ_IV_DATA);
 	if (!zdev->aibv)
 		return -ENOMEM;
 

arch/s390/pci/pci_clp.c

@@ -436,7 +436,7 @@ int clp_get_state(u32 fid, enum zpci_state *state)
 	struct clp_state_data sd = {fid, ZPCI_FN_STATE_RESERVED};
 	int rc;
 
-	rrb = clp_alloc_block(GFP_KERNEL);
+	rrb = clp_alloc_block(GFP_ATOMIC);
 	if (!rrb)
 		return -ENOMEM;
 

drivers/s390/block/dasd.c

@@ -1192,20 +1192,7 @@ static int dasd_hosts_show(struct seq_file *m, void *v)
 	return rc;
 }
 
-static int dasd_hosts_open(struct inode *inode, struct file *file)
-{
-	struct dasd_device *device = inode->i_private;
-
-	return single_open(file, dasd_hosts_show, device);
-}
-
-static const struct file_operations dasd_hosts_fops = {
-	.owner		= THIS_MODULE,
-	.open		= dasd_hosts_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(dasd_hosts);
 
 static void dasd_hosts_exit(struct dasd_device *device)
 {

drivers/s390/block/dasd_proc.c

@@ -339,8 +339,7 @@ dasd_proc_init(void)
 	dasd_proc_root_entry = proc_mkdir("dasd", NULL);
 	if (!dasd_proc_root_entry)
 		goto out_nodasd;
-	dasd_devices_entry = proc_create_seq("devices",
-					 S_IFREG | S_IRUGO | S_IWUSR,
+	dasd_devices_entry = proc_create_seq("devices", 0444,
 					 dasd_proc_root_entry,
 					 &dasd_devices_seq_ops);
 	if (!dasd_devices_entry)

drivers/s390/char/tape_proc.c

@@ -111,11 +111,8 @@ static const struct seq_operations tape_proc_seq = {
 void
 tape_proc_init(void)
 {
-	tape_proc_devices = proc_create_seq("tapedevices",
-			S_IFREG | S_IRUGO | S_IWUSR, NULL,  &tape_proc_seq);
-	if (tape_proc_devices == NULL) {
-		return;
-	}
+	tape_proc_devices = proc_create_seq("tapedevices", 0444, NULL,
+					    &tape_proc_seq);
 }
 
 /*

drivers/s390/cio/qdio_debug.c

@@ -190,19 +190,7 @@ static int qstat_show(struct seq_file *m, void *v)
 	return 0;
 }
 
-static int qstat_seq_open(struct inode *inode, struct file *filp)
-{
-	return single_open(filp, qstat_show,
-			   file_inode(filp)->i_private);
-}
-
-static const struct file_operations debugfs_fops = {
-	.owner	 = THIS_MODULE,
-	.open	 = qstat_seq_open,
-	.read	 = seq_read,
-	.llseek  = seq_lseek,
-	.release = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(qstat);
 
 static char *qperf_names[] = {
 	"Assumed adapter interrupts",
@@ -305,8 +293,8 @@ static void setup_debugfs_entry(struct qdio_q *q)
 	snprintf(name, QDIO_DEBUGFS_NAME_LEN, "%s_%d",
 		 q->is_input_q ? "input" : "output",
 		 q->nr);
-	q->debugfs_q = debugfs_create_file(name, S_IFREG | S_IRUGO | S_IWUSR,
-				q->irq_ptr->debugfs_dev, q, &debugfs_fops);
+	q->debugfs_q = debugfs_create_file(name, 0444,
+				q->irq_ptr->debugfs_dev, q, &qstat_fops);
 	if (IS_ERR(q->debugfs_q))
 		q->debugfs_q = NULL;
 }

drivers/s390/cio/vfio_ccw_fsm.c

@@ -130,7 +130,7 @@ static void fsm_io_request(struct vfio_ccw_private *private,
 	struct mdev_device *mdev = private->mdev;
 	char *errstr = "request";
 
-	private->state = VFIO_CCW_STATE_BOXED;
+	private->state = VFIO_CCW_STATE_BUSY;
 
 	memcpy(scsw, io_region->scsw_area, sizeof(*scsw));
 
@@ -216,11 +216,6 @@ fsm_func_t *vfio_ccw_jumptable[NR_VFIO_CCW_STATES][NR_VFIO_CCW_EVENTS] = {
 		[VFIO_CCW_EVENT_IO_REQ]		= fsm_io_request,
 		[VFIO_CCW_EVENT_INTERRUPT]	= fsm_irq,
 	},
-	[VFIO_CCW_STATE_BOXED] = {
-		[VFIO_CCW_EVENT_NOT_OPER]	= fsm_notoper,
-		[VFIO_CCW_EVENT_IO_REQ]		= fsm_io_busy,
-		[VFIO_CCW_EVENT_INTERRUPT]	= fsm_irq,
-	},
 	[VFIO_CCW_STATE_BUSY] = {
 		[VFIO_CCW_EVENT_NOT_OPER]	= fsm_notoper,
 		[VFIO_CCW_EVENT_IO_REQ]		= fsm_io_busy,

drivers/s390/cio/vfio_ccw_private.h

@@ -63,7 +63,6 @@ enum vfio_ccw_state {
 	VFIO_CCW_STATE_NOT_OPER,
 	VFIO_CCW_STATE_STANDBY,
 	VFIO_CCW_STATE_IDLE,
-	VFIO_CCW_STATE_BOXED,
 	VFIO_CCW_STATE_BUSY,
 	/* last element! */
 	NR_VFIO_CCW_STATES

drivers/s390/crypto/ap_bus.c

@@ -299,7 +299,7 @@ static int ap_query_queue(ap_qid_t qid, int *queue_depth, int *device_type,
 			ap_max_domain_id = 15;
 		switch (*device_type) {
 			/* For CEX2 and CEX3 the available functions
-			 * are not refrected by the facilities bits.
+			 * are not reflected by the facilities bits.
 			 * Instead it is coded into the type. So here
 			 * modify the function bits based on the type.
 			 */
@@ -1317,7 +1317,7 @@ static int ap_get_compatible_type(ap_qid_t qid, int rawtype, unsigned int func)
 }
 
 /*
- * helper function to be used with bus_find_dev
+ * Helper function to be used with bus_find_dev
  * matches for the card device with the given id
  */
 static int __match_card_device_with_id(struct device *dev, void *data)
@@ -1325,7 +1325,8 @@ static int __match_card_device_with_id(struct device *dev, void *data)
 	return is_card_dev(dev) && to_ap_card(dev)->id == (int)(long) data;
 }
 
-/* helper function to be used with bus_find_dev
+/*
+ * Helper function to be used with bus_find_dev
  * matches for the queue device with a given qid
  */
 static int __match_queue_device_with_qid(struct device *dev, void *data)
@@ -1333,143 +1334,185 @@ static int __match_queue_device_with_qid(struct device *dev, void *data)
 	return is_queue_dev(dev) && to_ap_queue(dev)->qid == (int)(long) data;
 }
 
-/**
- * ap_scan_bus(): Scan the AP bus for new devices
- * Runs periodically, workqueue timer (ap_config_time)
+/*
+ * Helper function for ap_scan_bus().
+ * Does the scan bus job for the given adapter id.
  */
-static void ap_scan_bus(struct work_struct *unused)
+static void _ap_scan_bus_adapter(int id)
 {
-	struct ap_queue *aq;
+	ap_qid_t qid;
+	unsigned int func;
 	struct ap_card *ac;
 	struct device *dev;
-	ap_qid_t qid;
-	int comp_type, depth = 0, type = 0;
-	unsigned int func = 0;
-	int rc, id, dom, borked, domains, defdomdevs = 0;
-
-	AP_DBF(DBF_DEBUG, "%s running\n", __func__);
+	struct ap_queue *aq;
+	int rc, dom, depth, type, comp_type, borked;
+
+	/* check if there is a card device registered with this id */
+	dev = bus_find_device(&ap_bus_type, NULL,
+			      (void *)(long) id,
+			      __match_card_device_with_id);
+	ac = dev ? to_ap_card(dev) : NULL;
+	if (!ap_test_config_card_id(id)) {
+		if (dev) {
+			/* Card device has been removed from configuration */
+			bus_for_each_dev(&ap_bus_type, NULL,
+					 (void *)(long) id,
+					 __ap_queue_devices_with_id_unregister);
+			device_unregister(dev);
+			put_device(dev);
+		}
+		return;
+	}
 
-	ap_query_configuration(ap_configuration);
-	ap_select_domain();
+	/*
+	 * This card id is enabled in the configuration. If we already have
+	 * a card device with this id, check if type and functions are still
+	 * the very same. Also verify that at least one queue is available.
+	 */
+	if (ac) {
+		/* find the first valid queue */
+		for (dom = 0; dom < AP_DOMAINS; dom++) {
+			qid = AP_MKQID(id, dom);
+			if (ap_query_queue(qid, &depth, &type, &func) == 0)
+				break;
+		}
+		borked = 0;
+		if (dom >= AP_DOMAINS) {
+			/* no accessible queue on this card */
+			borked = 1;
+		} else if (ac->raw_hwtype != type) {
+			/* card type has changed */
+			AP_DBF(DBF_INFO, "card=%02x type changed.\n", id);
+			borked = 1;
+		} else if (ac->functions != func) {
+			/* card functions have changed */
+			AP_DBF(DBF_INFO, "card=%02x functions changed.\n", id);
+			borked = 1;
+		}
+		if (borked) {
+			/* unregister card device and associated queues */
+			bus_for_each_dev(&ap_bus_type, NULL,
+					 (void *)(long) id,
+					 __ap_queue_devices_with_id_unregister);
+			device_unregister(dev);
+			put_device(dev);
+			/* go back if there is no valid queue on this card */
+			if (dom >= AP_DOMAINS)
+				return;
+			ac = NULL;
+		}
+	}
 
-	for (id = 0; id < AP_DEVICES; id++) {
-		/* check if device is registered */
+	/*
+	 * Go through all possible queue ids. Check and maybe create or release
+	 * queue devices for this card. If there exists no card device yet,
+	 * create a card device also.
+	 */
+	for (dom = 0; dom < AP_DOMAINS; dom++) {
+		qid = AP_MKQID(id, dom);
 		dev = bus_find_device(&ap_bus_type, NULL,
-				      (void *)(long) id,
-				      __match_card_device_with_id);
-		ac = dev ? to_ap_card(dev) : NULL;
-		if (!ap_test_config_card_id(id)) {
+				      (void *)(long) qid,
+				      __match_queue_device_with_qid);
+		aq = dev ? to_ap_queue(dev) : NULL;
+		if (!ap_test_config_domain(dom)) {
 			if (dev) {
-				/* Card device has been removed from
-				 * configuration, remove the belonging
-				 * queue devices.
+				/* Queue device exists but has been
+				 * removed from configuration.
 				 */
-				bus_for_each_dev(&ap_bus_type, NULL,
-					(void *)(long) id,
-					__ap_queue_devices_with_id_unregister);
-				/* now remove the card device */
 				device_unregister(dev);
 				put_device(dev);
 			}
 			continue;
 		}
-		/* According to the configuration there should be a card
-		 * device, so check if there is at least one valid queue
-		 * and maybe create queue devices and the card device.
-		 */
-		domains = 0;
-		for (dom = 0; dom < AP_DOMAINS; dom++) {
-			qid = AP_MKQID(id, dom);
-			dev = bus_find_device(&ap_bus_type, NULL,
-					      (void *)(long) qid,
-					      __match_queue_device_with_qid);
-			aq = dev ? to_ap_queue(dev) : NULL;
-			if (!ap_test_config_domain(dom)) {
-				if (dev) {
-					/* Queue device exists but has been
-					 * removed from configuration.
-					 */
-					device_unregister(dev);
-					put_device(dev);
-				}
-				continue;
-			}
-			rc = ap_query_queue(qid, &depth, &type, &func);
-			if (dev) {
+		/* try to fetch infos about this queue */
+		rc = ap_query_queue(qid, &depth, &type, &func);
+		if (dev) {
+			if (rc == -ENODEV)
+				borked = 1;
+			else {
 				spin_lock_bh(&aq->lock);
-				if (rc == -ENODEV ||
-				    /* adapter reconfiguration */
-				    (ac && ac->functions != func))
-					aq->state = AP_STATE_BORKED;
 				borked = aq->state == AP_STATE_BORKED;
 				spin_unlock_bh(&aq->lock);
-				if (borked)	/* Remove broken device */
-					device_unregister(dev);
-				put_device(dev);
-				if (!borked) {
-					domains++;
-					if (dom == ap_domain_index)
-						defdomdevs++;
-					continue;
-				}
-			}
-			if (rc)
-				continue;
-			/* a new queue device is needed, check out comp type */
-			comp_type = ap_get_compatible_type(qid, type, func);
-			if (!comp_type)
-				continue;
-			/* maybe a card device needs to be created first */
-			if (!ac) {
-				ac = ap_card_create(id, depth, type,
-						    comp_type, func);
-				if (!ac)
-					continue;
-				ac->ap_dev.device.bus = &ap_bus_type;
-				ac->ap_dev.device.parent = ap_root_device;
-				dev_set_name(&ac->ap_dev.device,
-					     "card%02x", id);
-				/* Register card with AP bus */
-				rc = device_register(&ac->ap_dev.device);
-				if (rc) {
-					put_device(&ac->ap_dev.device);
-					ac = NULL;
-					break;
-				}
-				/* get it and thus adjust reference counter */
-				get_device(&ac->ap_dev.device);
 			}
-			/* now create the new queue device */
-			aq = ap_queue_create(qid, comp_type);
-			if (!aq)
+			if (borked)	/* Remove broken device */
+				device_unregister(dev);
+			put_device(dev);
+			continue;
+		}
+		if (rc)
+			continue;
+		/* a new queue device is needed, check out comp type */
+		comp_type = ap_get_compatible_type(qid, type, func);
+		if (!comp_type)
+			continue;
+		/* maybe a card device needs to be created first */
+		if (!ac) {
+			ac = ap_card_create(id, depth, type, comp_type, func);
+			if (!ac)
 				continue;
-			aq->card = ac;
-			aq->ap_dev.device.bus = &ap_bus_type;
-			aq->ap_dev.device.parent = &ac->ap_dev.device;
-			dev_set_name(&aq->ap_dev.device,
-				     "%02x.%04x", id, dom);
-			/* Register device */
-			rc = device_register(&aq->ap_dev.device);
+			ac->ap_dev.device.bus = &ap_bus_type;
+			ac->ap_dev.device.parent = ap_root_device;
+			dev_set_name(&ac->ap_dev.device, "card%02x", id);
+			/* Register card device with AP bus */
+			rc = device_register(&ac->ap_dev.device);
 			if (rc) {
-				put_device(&aq->ap_dev.device);
-				continue;
+				put_device(&ac->ap_dev.device);
+				ac = NULL;
+				break;
 			}
-			domains++;
-			if (dom == ap_domain_index)
-				defdomdevs++;
-		} /* end domain loop */
-		if (ac) {
-			/* remove card dev if there are no queue devices */
-			if (!domains)
-				device_unregister(&ac->ap_dev.device);
-			put_device(&ac->ap_dev.device);
+			/* get it and thus adjust reference counter */
+			get_device(&ac->ap_dev.device);
+		}
+		/* now create the new queue device */
+		aq = ap_queue_create(qid, comp_type);
+		if (!aq)
+			continue;
+		aq->card = ac;
+		aq->ap_dev.device.bus = &ap_bus_type;
+		aq->ap_dev.device.parent = &ac->ap_dev.device;
+		dev_set_name(&aq->ap_dev.device, "%02x.%04x", id, dom);
+		/* Register queue device */
+		rc = device_register(&aq->ap_dev.device);
+		if (rc) {
+			put_device(&aq->ap_dev.device);
+			continue;
 		}
-	} /* end device loop */
+	} /* end domain loop */
+
+	if (ac)
+		put_device(&ac->ap_dev.device);
+}
 
-	if (ap_domain_index >= 0 && defdomdevs < 1)
-		AP_DBF(DBF_INFO,
-		       "no queue device with default domain %d available\n",
-		       ap_domain_index);
+/**
+ * ap_scan_bus(): Scan the AP bus for new devices
+ * Runs periodically, workqueue timer (ap_config_time)
+ */
+static void ap_scan_bus(struct work_struct *unused)
+{
+	int id;
+
+	AP_DBF(DBF_DEBUG, "%s running\n", __func__);
+
+	ap_query_configuration(ap_configuration);
+	ap_select_domain();
+
+	/* loop over all possible adapters */
+	for (id = 0; id < AP_DEVICES; id++)
+		_ap_scan_bus_adapter(id);
+
+	/* check if there is at least one queue available with default domain */
+	if (ap_domain_index >= 0) {
+		struct device *dev =
+			bus_find_device(&ap_bus_type, NULL,
+					(void *)(long) ap_domain_index,
+					__match_queue_device_with_qid);
+		if (dev)
+			put_device(dev);
+		else
+			AP_DBF(DBF_INFO,
+			       "no queue device with default domain %d available\n",
+			       ap_domain_index);
+	}
 
 	mod_timer(&ap_config_timer, jiffies + ap_config_time * HZ);
 }

drivers/s390/crypto/ap_queue.c

@@ -14,6 +14,9 @@
 #include <asm/facility.h>
 
 #include "ap_bus.h"
+#include "ap_debug.h"
+
+static void __ap_flush_queue(struct ap_queue *aq);
 
 /**
  * ap_queue_enable_interruption(): Enable interruption on an AP queue.
@@ -541,7 +544,25 @@ static ssize_t reset_show(struct device *dev,
 	return rc;
 }
 
-static DEVICE_ATTR_RO(reset);
+static ssize_t reset_store(struct device *dev,
+			   struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct ap_queue *aq = to_ap_queue(dev);
+
+	spin_lock_bh(&aq->lock);
+	__ap_flush_queue(aq);
+	aq->state = AP_STATE_RESET_START;
+	ap_wait(ap_sm_event(aq, AP_EVENT_POLL));
+	spin_unlock_bh(&aq->lock);
+
+	AP_DBF(DBF_INFO, "reset queue=%02x.%04x triggered by user\n",
+	       AP_QID_CARD(aq->qid), AP_QID_QUEUE(aq->qid));
+
+	return count;
+}
+
+static DEVICE_ATTR_RW(reset);
 
 static ssize_t interrupt_show(struct device *dev,
 			      struct device_attribute *attr, char *buf)

drivers/s390/crypto/vfio_ap_drv.c

@@ -11,6 +11,7 @@
 #include <linux/mod_devicetable.h>
 #include <linux/slab.h>
 #include <linux/string.h>
+#include <asm/facility.h>
 #include "vfio_ap_private.h"
 
 #define VFIO_AP_ROOT_NAME "vfio_ap"

drivers/s390/crypto/zcrypt_error.h

@@ -51,6 +51,7 @@ struct error_hdr {
 #define REP82_ERROR_FORMAT_FIELD	    0x29
 #define REP82_ERROR_INVALID_COMMAND	    0x30
 #define REP82_ERROR_MALFORMED_MSG	    0x40
+#define REP82_ERROR_INVALID_SPECIAL_CMD	    0x41
 #define REP82_ERROR_INVALID_DOMAIN_PRECHECK 0x42
 #define REP82_ERROR_RESERVED_FIELDO	    0x50 /* old value	*/
 #define REP82_ERROR_WORD_ALIGNMENT	    0x60
@@ -89,6 +90,7 @@ static inline int convert_error(struct zcrypt_queue *zq,
 	case REP88_ERROR_MESSAGE_MALFORMD:
 	case REP82_ERROR_INVALID_DOMAIN_PRECHECK:
 	case REP82_ERROR_INVALID_DOMAIN_PENDING:
+	case REP82_ERROR_INVALID_SPECIAL_CMD:
 	//   REP88_ERROR_INVALID_KEY		// '82' CEX2A
 	//   REP88_ERROR_OPERAND		// '84' CEX2A
 	//   REP88_ERROR_OPERAND_EVEN_MOD	// '85' CEX2A

lib/bust_spinlocks.c

@@ -2,7 +2,8 @@
 /*
  * lib/bust_spinlocks.c
  *
- * Provides a minimal bust_spinlocks for architectures which don't have one of their own.
+ * Provides a minimal bust_spinlocks for architectures which don't
+ * have one of their own.
  *
  * bust_spinlocks() clears any spinlocks which would prevent oops, die(), BUG()
  * and panic() information from reaching the user.
@@ -16,8 +17,7 @@
 #include <linux/vt_kern.h>
 #include <linux/console.h>
 
-
-void __attribute__((weak)) bust_spinlocks(int yes)
+void bust_spinlocks(int yes)
 {
 	if (yes) {
 		++oops_in_progress;