Commit 05ba533c authored by Thierry Escande's avatar Thierry Escande Committed by Marcel Holtmann

Bluetooth: hci_qca: Add serdev support

Add support for Qualcomm serial slave devices. Probe the serial device,
retrieve its maximum speed and register a new hci uart device.
Signed-off-by: default avatarThierry Escande <thierry.escande@linaro.org>
Reviewed-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent 52b0900f
......@@ -197,6 +197,7 @@ config BT_HCIUART_BCM
config BT_HCIUART_QCA
bool "Qualcomm Atheros protocol support"
depends on BT_HCIUART
depends on BT_HCIUART_SERDEV
select BT_HCIUART_H4
select BT_QCA
help
......
......@@ -29,7 +29,12 @@
*/
#include <linux/kernel.h>
#include <linux/clk.h>
#include <linux/debugfs.h>
#include <linux/gpio/consumer.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/serdev.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
......@@ -50,6 +55,9 @@
#define IBS_TX_IDLE_TIMEOUT_MS 2000
#define BAUDRATE_SETTLE_TIMEOUT_MS 300
/* susclk rate */
#define SUSCLK_RATE_32KHZ 32768
/* HCI_IBS transmit side sleep protocol states */
enum tx_ibs_states {
HCI_IBS_TX_ASLEEP,
......@@ -111,6 +119,12 @@ struct qca_data {
u64 votes_off;
};
struct qca_serdev {
struct hci_uart serdev_hu;
struct gpio_desc *bt_en;
struct clk *susclk;
};
static void __serial_clock_on(struct tty_struct *tty)
{
/* TODO: Some chipset requires to enable UART clock on client
......@@ -386,6 +400,7 @@ static void hci_ibs_wake_retrans_timeout(struct timer_list *t)
/* Initialize protocol */
static int qca_open(struct hci_uart *hu)
{
struct qca_serdev *qcadev;
struct qca_data *qca;
BT_DBG("hu %p qca_open", hu);
......@@ -444,6 +459,13 @@ static int qca_open(struct hci_uart *hu)
timer_setup(&qca->tx_idle_timer, hci_ibs_tx_idle_timeout, 0);
qca->tx_idle_delay = IBS_TX_IDLE_TIMEOUT_MS;
if (hu->serdev) {
serdev_device_open(hu->serdev);
qcadev = serdev_device_get_drvdata(hu->serdev);
gpiod_set_value_cansleep(qcadev->bt_en, 1);
}
BT_DBG("HCI_UART_QCA open, tx_idle_delay=%u, wake_retrans=%u",
qca->tx_idle_delay, qca->wake_retrans);
......@@ -512,6 +534,7 @@ static int qca_flush(struct hci_uart *hu)
/* Close protocol */
static int qca_close(struct hci_uart *hu)
{
struct qca_serdev *qcadev;
struct qca_data *qca = hu->priv;
BT_DBG("hu %p qca close", hu);
......@@ -525,6 +548,13 @@ static int qca_close(struct hci_uart *hu)
destroy_workqueue(qca->workqueue);
qca->hu = NULL;
if (hu->serdev) {
serdev_device_close(hu->serdev);
qcadev = serdev_device_get_drvdata(hu->serdev);
gpiod_set_value_cansleep(qcadev->bt_en, 0);
}
kfree_skb(qca->rx_skb);
hu->priv = NULL;
......@@ -885,6 +915,14 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
return 0;
}
static inline void host_set_baudrate(struct hci_uart *hu, unsigned int speed)
{
if (hu->serdev)
serdev_device_set_baudrate(hu->serdev, speed);
else
hci_uart_set_baudrate(hu, speed);
}
static int qca_setup(struct hci_uart *hu)
{
struct hci_dev *hdev = hu->hdev;
......@@ -905,7 +943,7 @@ static int qca_setup(struct hci_uart *hu)
speed = hu->proto->init_speed;
if (speed)
hci_uart_set_baudrate(hu, speed);
host_set_baudrate(hu, speed);
/* Setup user speed if needed */
speed = 0;
......@@ -924,7 +962,7 @@ static int qca_setup(struct hci_uart *hu)
ret);
return ret;
}
hci_uart_set_baudrate(hu, speed);
host_set_baudrate(hu, speed);
}
/* Setup patch / NVM configurations */
......@@ -964,12 +1002,80 @@ static struct hci_uart_proto qca_proto = {
.dequeue = qca_dequeue,
};
static int qca_serdev_probe(struct serdev_device *serdev)
{
struct qca_serdev *qcadev;
int err;
qcadev = devm_kzalloc(&serdev->dev, sizeof(*qcadev), GFP_KERNEL);
if (!qcadev)
return -ENOMEM;
qcadev->serdev_hu.serdev = serdev;
serdev_device_set_drvdata(serdev, qcadev);
qcadev->bt_en = devm_gpiod_get(&serdev->dev, "enable",
GPIOD_OUT_LOW);
if (IS_ERR(qcadev->bt_en)) {
dev_err(&serdev->dev, "failed to acquire enable gpio\n");
return PTR_ERR(qcadev->bt_en);
}
qcadev->susclk = devm_clk_get(&serdev->dev, NULL);
if (IS_ERR(qcadev->susclk)) {
dev_err(&serdev->dev, "failed to acquire clk\n");
return PTR_ERR(qcadev->susclk);
}
err = clk_set_rate(qcadev->susclk, SUSCLK_RATE_32KHZ);
if (err)
return err;
err = clk_prepare_enable(qcadev->susclk);
if (err)
return err;
err = hci_uart_register_device(&qcadev->serdev_hu, &qca_proto);
if (err)
clk_disable_unprepare(qcadev->susclk);
return err;
}
static void qca_serdev_remove(struct serdev_device *serdev)
{
struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
hci_uart_unregister_device(&qcadev->serdev_hu);
clk_disable_unprepare(qcadev->susclk);
}
static const struct of_device_id qca_bluetooth_of_match[] = {
{ .compatible = "qcom,qca6174-bt" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
static struct serdev_device_driver qca_serdev_driver = {
.probe = qca_serdev_probe,
.remove = qca_serdev_remove,
.driver = {
.name = "hci_uart_qca",
.of_match_table = qca_bluetooth_of_match,
},
};
int __init qca_init(void)
{
serdev_device_driver_register(&qca_serdev_driver);
return hci_uart_register_proto(&qca_proto);
}
int __exit qca_deinit(void)
{
serdev_device_driver_unregister(&qca_serdev_driver);
return hci_uart_unregister_proto(&qca_proto);
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment