media: dvb: clean up redundant break statements

There are several places where a break statement occurs before
a following break statement; these are unnecessary and can be
removed to clean up the code a little.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/dvb-frontends/drxd_hard.c

@@ -2263,61 +2263,41 @@ static int DRX_Start(struct drxd_state *state, s32 off)
 		case DRX_CHANNEL_LOW:
 			transmissionParams |= SC_RA_RAM_OP_PARAM_PRIO_LO;
 			status = Write16(state, EC_SB_REG_PRIOR__A, EC_SB_REG_PRIOR_LO, 0x0000);
-			if (status < 0)
-				break;
 			break;
 		case DRX_CHANNEL_HIGH:
 			transmissionParams |= SC_RA_RAM_OP_PARAM_PRIO_HI;
 			status = Write16(state, EC_SB_REG_PRIOR__A, EC_SB_REG_PRIOR_HI, 0x0000);
-			if (status < 0)
-				break;
 			break;
-
 		}
 
 		switch (p->code_rate_HP) {
 		case FEC_1_2:
 			transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_1_2;
-			if (state->type_A) {
+			if (state->type_A)
 				status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C1_2, 0x0000);
-				if (status < 0)
-					break;
-			}
 			break;
 		default:
 			operationMode |= SC_RA_RAM_OP_AUTO_RATE__M;
 			/* fall through */
 		case FEC_2_3:
 			transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_2_3;
-			if (state->type_A) {
+			if (state->type_A)
 				status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C2_3, 0x0000);
-				if (status < 0)
-					break;
-			}
 			break;
 		case FEC_3_4:
 			transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_3_4;
-			if (state->type_A) {
+			if (state->type_A)
 				status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C3_4, 0x0000);
-				if (status < 0)
-					break;
-			}
 			break;
 		case FEC_5_6:
 			transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_5_6;
-			if (state->type_A) {
+			if (state->type_A)
 				status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C5_6, 0x0000);
-				if (status < 0)
-					break;
-			}
 			break;
 		case FEC_7_8:
 			transmissionParams |= SC_RA_RAM_OP_PARAM_RATE_7_8;
-			if (state->type_A) {
+			if (state->type_A)
 				status = Write16(state, EC_VD_REG_SET_CODERATE__A, EC_VD_REG_SET_CODERATE_C7_8, 0x0000);
-				if (status < 0)
-					break;
-			}
 			break;
 		}
 		if (status < 0)