Commit 06551fda authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman

staging: comedi: dt282x: tidy up the irq support in dt282x_attach()

An irq is only needed by this driver in order to support async commands.
Since it is optional, modify the attach so that if the request_irq() fails
the attach does not fail.

Remove the printk noise about the irq.

Only hookup the async command support if the request_irq() was successful.

Also, only call dt282x_grab_dma() if we have an irq since interrupt support
is needed to support dma.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5b7b0eb2
...@@ -1118,9 +1118,9 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it) ...@@ -1118,9 +1118,9 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it)
{ {
const struct dt282x_board *board = comedi_board(dev); const struct dt282x_board *board = comedi_board(dev);
struct dt282x_private *devpriv; struct dt282x_private *devpriv;
int i, irq;
int ret;
struct comedi_subdevice *s; struct comedi_subdevice *s;
int ret;
int i;
ret = comedi_request_region(dev, it->options[0], DT2821_SIZE); ret = comedi_request_region(dev, it->options[0], DT2821_SIZE);
if (ret) if (ret)
...@@ -1144,53 +1144,23 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it) ...@@ -1144,53 +1144,23 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it)
} }
/* should do board test */ /* should do board test */
irq = it->options[opt_irq]; if (it->options[opt_irq] > 0) {
#if 0 ret = request_irq(it->options[opt_irq], dt282x_interrupt, 0,
if (irq < 0) {
unsigned long flags;
int irqs;
save_flags(flags);
sti();
irqs = probe_irq_on();
/* trigger interrupt */
udelay(100);
irq = probe_irq_off(irqs);
restore_flags(flags);
if (0 /* error */)
printk(KERN_ERR " error probing irq (bad)");
}
#endif
if (irq > 0) {
printk(KERN_INFO " ( irq = %d )", irq);
ret = request_irq(irq, dt282x_interrupt, 0,
dev->board_name, dev); dev->board_name, dev);
if (ret < 0) { if (ret == 0)
printk(KERN_ERR " failed to get irq\n"); dev->irq = it->options[opt_irq];
return -EIO;
}
dev->irq = irq;
} else if (irq == 0) {
printk(KERN_INFO " (no irq)");
} else {
#if 0
printk(KERN_INFO " (probe returned multiple irqs--bad)");
#else
printk(KERN_INFO " (irq probe not implemented)");
#endif
} }
devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv)); devpriv = comedi_alloc_devpriv(dev, sizeof(*devpriv));
if (!devpriv) if (!devpriv)
return -ENOMEM; return -ENOMEM;
ret = dt282x_grab_dma(dev, it->options[opt_dma1], if (dev->irq) {
it->options[opt_dma2]); ret = dt282x_grab_dma(dev, it->options[opt_dma1],
if (ret < 0) it->options[opt_dma2]);
return ret; if (ret < 0)
return ret;
}
ret = comedi_alloc_subdevices(dev, 3); ret = comedi_alloc_subdevices(dev, 3);
if (ret) if (ret)
...@@ -1198,22 +1168,25 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it) ...@@ -1198,22 +1168,25 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it)
s = &dev->subdevices[0]; s = &dev->subdevices[0];
dev->read_subdev = s;
/* ai subdevice */ /* ai subdevice */
s->type = COMEDI_SUBD_AI; s->type = COMEDI_SUBD_AI;
s->subdev_flags = SDF_READABLE | SDF_CMD_READ | s->subdev_flags = SDF_READABLE |
((it->options[opt_diff]) ? SDF_DIFF : SDF_COMMON); ((it->options[opt_diff]) ? SDF_DIFF : SDF_COMMON);
s->n_chan = s->n_chan =
(it->options[opt_diff]) ? board->adchan_di : board->adchan_se; (it->options[opt_diff]) ? board->adchan_di : board->adchan_se;
s->insn_read = dt282x_ai_insn_read; s->insn_read = dt282x_ai_insn_read;
s->do_cmdtest = dt282x_ai_cmdtest;
s->do_cmd = dt282x_ai_cmd;
s->cancel = dt282x_ai_cancel;
s->maxdata = (1 << board->adbits) - 1; s->maxdata = (1 << board->adbits) - 1;
s->len_chanlist = 16;
s->range_table = s->range_table =
opt_ai_range_lkup(board->ispgl, it->options[opt_ai_range]); opt_ai_range_lkup(board->ispgl, it->options[opt_ai_range]);
devpriv->ad_2scomp = it->options[opt_ai_twos]; devpriv->ad_2scomp = it->options[opt_ai_twos];
if (dev->irq) {
dev->read_subdev = s;
s->subdev_flags |= SDF_CMD_READ;
s->len_chanlist = 16;
s->do_cmdtest = dt282x_ai_cmdtest;
s->do_cmd = dt282x_ai_cmd;
s->cancel = dt282x_ai_cancel;
}
s = &dev->subdevices[1]; s = &dev->subdevices[1];
...@@ -1221,15 +1194,10 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it) ...@@ -1221,15 +1194,10 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (s->n_chan) { if (s->n_chan) {
/* ao subsystem */ /* ao subsystem */
s->type = COMEDI_SUBD_AO; s->type = COMEDI_SUBD_AO;
dev->write_subdev = s; s->subdev_flags = SDF_WRITABLE;
s->subdev_flags = SDF_WRITABLE | SDF_CMD_WRITE;
s->insn_read = dt282x_ao_insn_read; s->insn_read = dt282x_ao_insn_read;
s->insn_write = dt282x_ao_insn_write; s->insn_write = dt282x_ao_insn_write;
s->do_cmdtest = dt282x_ao_cmdtest;
s->do_cmd = dt282x_ao_cmd;
s->cancel = dt282x_ao_cancel;
s->maxdata = (1 << board->dabits) - 1; s->maxdata = (1 << board->dabits) - 1;
s->len_chanlist = 2;
s->range_table_list = devpriv->darangelist; s->range_table_list = devpriv->darangelist;
devpriv->darangelist[0] = devpriv->darangelist[0] =
opt_ao_range_lkup(it->options[opt_ao0_range]); opt_ao_range_lkup(it->options[opt_ao0_range]);
...@@ -1237,6 +1205,14 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it) ...@@ -1237,6 +1205,14 @@ static int dt282x_attach(struct comedi_device *dev, struct comedi_devconfig *it)
opt_ao_range_lkup(it->options[opt_ao1_range]); opt_ao_range_lkup(it->options[opt_ao1_range]);
devpriv->da0_2scomp = it->options[opt_ao0_twos]; devpriv->da0_2scomp = it->options[opt_ao0_twos];
devpriv->da1_2scomp = it->options[opt_ao1_twos]; devpriv->da1_2scomp = it->options[opt_ao1_twos];
if (dev->irq) {
dev->write_subdev = s;
s->subdev_flags |= SDF_CMD_WRITE;
s->len_chanlist = 2;
s->do_cmdtest = dt282x_ao_cmdtest;
s->do_cmd = dt282x_ao_cmd;
s->cancel = dt282x_ao_cancel;
}
} else { } else {
s->type = COMEDI_SUBD_UNUSED; s->type = COMEDI_SUBD_UNUSED;
} }
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment