Merge master.kernel.org:/home/rmk/linux-2.6-arm

arch/arm/Kconfig

@@ -704,8 +704,7 @@ source "drivers/acorn/block/Kconfig"
 
 if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
 	|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
-	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
-	|| MACH_MP1000
+	|| ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
 source "drivers/ide/Kconfig"
 endif
 

arch/arm/Makefile

@@ -38,6 +38,7 @@ comma = ,
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
 arch-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
+arch-$(CONFIG_CPU_32v6K)	:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
 arch-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4)
 arch-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3 -march=armv3
@@ -143,7 +144,7 @@ drivers-$(CONFIG_OPROFILE)      += arch/arm/oprofile/
 drivers-$(CONFIG_ARCH_CLPS7500)	+= drivers/acorn/char/
 drivers-$(CONFIG_ARCH_L7200)	+= drivers/acorn/char/
 
-libs-y				+= arch/arm/lib/
+libs-y				:= arch/arm/lib/ $(libs-y)
 
 # Default target when executing plain make
 ifeq ($(CONFIG_XIP_KERNEL),y)

arch/arm/boot/compressed/head.S

@@ -39,8 +39,7 @@
     defined(CONFIG_ARCH_IXP4XX) || \
     defined(CONFIG_ARCH_IXP2000) || \
     defined(CONFIG_ARCH_LH7A40X) || \
-    defined(CONFIG_ARCH_OMAP) || \
-    defined(CONFIG_MACH_MP1000)
+    defined(CONFIG_ARCH_OMAP)
 		.macro	loadsp,	rb
 		addruart \rb
 		.endm

arch/arm/configs/ixdp2401_defconfig

@@ -152,7 +152,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,57600 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M@0x0 pci=firmware"
 # CONFIG_XIP_KERNEL is not set
 
 #
@@ -560,7 +560,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=3
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #

arch/arm/configs/ixdp2801_defconfig

@@ -560,7 +560,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_NR_UARTS=3
 # CONFIG_SERIAL_8250_EXTENDED is not set
 
 #

arch/arm/lib/bitops.h

 #include <linux/config.h>
 
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_MPCORE)
+#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_CPU_32v6K)
 	.macro	bitop, instr
 	mov	r2, #1
 	and	r3, r0, #7		@ Get bit offset

arch/arm/lib/uaccess.S

@@ -43,8 +43,6 @@ ENTRY(__arch_copy_to_user)
 		stmfd	sp!, {r2, r4 - r7, lr}
 		cmp	r2, #4
 		blt	.c2u_not_enough
-	PLD(	pld	[r1, #0]		)
-	PLD(	pld	[r0, #0]		)
 		ands	ip, r0, #3
 		bne	.c2u_dest_not_aligned
 .c2u_dest_aligned:
@@ -73,25 +71,13 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		sub	r2, r2, ip
 		subs	ip, ip, #32
 		blt	.c2u_0rem8lp
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-	PLD(	subs	ip, ip, #64			)
-	PLD(	blt	.c2u_0cpynopld		)
-	PLD(	pld	[r1, #60]		)
-	PLD(	pld	[r0, #60]		)
-
-.c2u_0cpy8lp:
-	PLD(	pld	[r1, #92]		)
-	PLD(	pld	[r0, #92]		)
-.c2u_0cpynopld:	ldmia	r1!, {r3 - r6}
+
+.c2u_0cpy8lp:	ldmia	r1!, {r3 - r6}
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
 		ldmia	r1!, {r3 - r6}
 		subs	ip, ip, #32
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
 		bpl	.c2u_0cpy8lp
-	PLD(	cmn	ip, #64			)
-	PLD(	bge	.c2u_0cpynopld		)
-	PLD(	add	ip, ip, #64		)
 
 .c2u_0rem8lp:	cmn	ip, #16
 		ldmgeia	r1!, {r3 - r6}
@@ -143,17 +129,8 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		sub	r2, r2, ip
 		subs	ip, ip, #16
 		blt	.c2u_1rem8lp
-	PLD(	pld	[r1, #12]		)
-	PLD(	pld	[r0, #12]		)
-	PLD(	subs	ip, ip, #32		)
-	PLD(	blt	.c2u_1cpynopld		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-
-.c2u_1cpy8lp:
-	PLD(	pld	[r1, #44]		)
-	PLD(	pld	[r0, #44]		)
-.c2u_1cpynopld:	mov	r3, r7, pull #8
+
+.c2u_1cpy8lp:	mov	r3, r7, pull #8
 		ldmia	r1!, {r4 - r7}
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #24
@@ -165,9 +142,6 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		orr	r6, r6, r7, push #24
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
 		bpl	.c2u_1cpy8lp
-	PLD(	cmn	ip, #32			)
-	PLD(	bge	.c2u_1cpynopld		)
-	PLD(	add	ip, ip, #32		)
 
 .c2u_1rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #8
@@ -210,17 +184,8 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		sub	r2, r2, ip
 		subs	ip, ip, #16
 		blt	.c2u_2rem8lp
-	PLD(	pld	[r1, #12]		)
-	PLD(	pld	[r0, #12]		)
-	PLD(	subs	ip, ip, #32		)
-	PLD(	blt	.c2u_2cpynopld		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-
-.c2u_2cpy8lp:
-	PLD(	pld	[r1, #44]		)
-	PLD(	pld	[r0, #44]		)
-.c2u_2cpynopld:	mov	r3, r7, pull #16
+
+.c2u_2cpy8lp:	mov	r3, r7, pull #16
 		ldmia	r1!, {r4 - r7}
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #16
@@ -232,9 +197,6 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		orr	r6, r6, r7, push #16
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
 		bpl	.c2u_2cpy8lp
-	PLD(	cmn	ip, #32			)
-	PLD(	bge	.c2u_2cpynopld		)
-	PLD(	add	ip, ip, #32		)
 
 .c2u_2rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #16
@@ -277,17 +239,8 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		sub	r2, r2, ip
 		subs	ip, ip, #16
 		blt	.c2u_3rem8lp
-	PLD(	pld	[r1, #12]		)
-	PLD(	pld	[r0, #12]		)
-	PLD(	subs	ip, ip, #32		)
-	PLD(	blt	.c2u_3cpynopld		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-
-.c2u_3cpy8lp:
-	PLD(	pld	[r1, #44]		)
-	PLD(	pld	[r0, #44]		)
-.c2u_3cpynopld:	mov	r3, r7, pull #24
+
+.c2u_3cpy8lp:	mov	r3, r7, pull #24
 		ldmia	r1!, {r4 - r7}
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #8
@@ -299,9 +252,6 @@ USER(		strt	r3, [r0], #4)			@ May fault
 		orr	r6, r6, r7, push #8
 		stmia	r0!, {r3 - r6}			@ Shouldnt fault
 		bpl	.c2u_3cpy8lp
-	PLD(	cmn	ip, #32			)
-	PLD(	bge	.c2u_3cpynopld		)
-	PLD(	add	ip, ip, #32		)
 
 .c2u_3rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #24
@@ -356,8 +306,6 @@ ENTRY(__arch_copy_from_user)
 		stmfd	sp!, {r0, r2, r4 - r7, lr}
 		cmp	r2, #4
 		blt	.cfu_not_enough
-	PLD(	pld	[r1, #0]		)
-	PLD(	pld	[r0, #0]		)
 		ands	ip, r0, #3
 		bne	.cfu_dest_not_aligned
 .cfu_dest_aligned:
@@ -385,25 +333,13 @@ USER(		ldrt	r3, [r1], #4)
 		sub	r2, r2, ip
 		subs	ip, ip, #32
 		blt	.cfu_0rem8lp
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-	PLD(	subs	ip, ip, #64			)
-	PLD(	blt	.cfu_0cpynopld		)
-	PLD(	pld	[r1, #60]		)
-	PLD(	pld	[r0, #60]		)
-
-.cfu_0cpy8lp:
-	PLD(	pld	[r1, #92]		)
-	PLD(	pld	[r0, #92]		)
-.cfu_0cpynopld:	ldmia	r1!, {r3 - r6}			@ Shouldnt fault
+
+.cfu_0cpy8lp:	ldmia	r1!, {r3 - r6}			@ Shouldnt fault
 		stmia	r0!, {r3 - r6}
 		ldmia	r1!, {r3 - r6}			@ Shouldnt fault
 		subs	ip, ip, #32
 		stmia	r0!, {r3 - r6}
 		bpl	.cfu_0cpy8lp
-	PLD(	cmn	ip, #64			)
-	PLD(	bge	.cfu_0cpynopld		)
-	PLD(	add	ip, ip, #64		)
 
 .cfu_0rem8lp:	cmn	ip, #16
 		ldmgeia	r1!, {r3 - r6}			@ Shouldnt fault
@@ -456,17 +392,8 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		sub	r2, r2, ip
 		subs	ip, ip, #16
 		blt	.cfu_1rem8lp
-	PLD(	pld	[r1, #12]		)
-	PLD(	pld	[r0, #12]		)
-	PLD(	subs	ip, ip, #32		)
-	PLD(	blt	.cfu_1cpynopld		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-
-.cfu_1cpy8lp:
-	PLD(	pld	[r1, #44]		)
-	PLD(	pld	[r0, #44]		)
-.cfu_1cpynopld:	mov	r3, r7, pull #8
+
+.cfu_1cpy8lp:	mov	r3, r7, pull #8
 		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #24
@@ -478,9 +405,6 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		orr	r6, r6, r7, push #24
 		stmia	r0!, {r3 - r6}
 		bpl	.cfu_1cpy8lp
-	PLD(	cmn	ip, #32			)
-	PLD(	bge	.cfu_1cpynopld		)
-	PLD(	add	ip, ip, #32		)
 
 .cfu_1rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #8
@@ -523,17 +447,8 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		sub	r2, r2, ip
 		subs	ip, ip, #16
 		blt	.cfu_2rem8lp
-	PLD(	pld	[r1, #12]		)
-	PLD(	pld	[r0, #12]		)
-	PLD(	subs	ip, ip, #32		)
-	PLD(	blt	.cfu_2cpynopld		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-
-.cfu_2cpy8lp:
-	PLD(	pld	[r1, #44]		)
-	PLD(	pld	[r0, #44]		)
-.cfu_2cpynopld:	mov	r3, r7, pull #16
+
+.cfu_2cpy8lp:	mov	r3, r7, pull #16
 		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
 		subs	ip, ip, #16
 		orr	r3, r3, r4, push #16
@@ -545,9 +460,6 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		orr	r6, r6, r7, push #16
 		stmia	r0!, {r3 - r6}
 		bpl	.cfu_2cpy8lp
-	PLD(	cmn	ip, #32			)
-	PLD(	bge	.cfu_2cpynopld		)
-	PLD(	add	ip, ip, #32		)
 
 .cfu_2rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #16
@@ -590,17 +502,8 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		sub	r2, r2, ip
 		subs	ip, ip, #16
 		blt	.cfu_3rem8lp
-	PLD(	pld	[r1, #12]		)
-	PLD(	pld	[r0, #12]		)
-	PLD(	subs	ip, ip, #32		)
-	PLD(	blt	.cfu_3cpynopld		)
-	PLD(	pld	[r1, #28]		)
-	PLD(	pld	[r0, #28]		)
-
-.cfu_3cpy8lp:
-	PLD(	pld	[r1, #44]		)
-	PLD(	pld	[r0, #44]		)
-.cfu_3cpynopld:	mov	r3, r7, pull #24
+
+.cfu_3cpy8lp:	mov	r3, r7, pull #24
 		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
 		orr	r3, r3, r4, push #8
 		mov	r4, r4, pull #24
@@ -612,9 +515,6 @@ USER(		ldrt	r7, [r1], #4)			@ May fault
 		stmia	r0!, {r3 - r6}
 		subs	ip, ip, #16
 		bpl	.cfu_3cpy8lp
-	PLD(	cmn	ip, #32			)
-	PLD(	bge	.cfu_3cpynopld		)
-	PLD(	add	ip, ip, #32		)
 
 .cfu_3rem8lp:	tst	ip, #8
 		movne	r3, r7, pull #24

arch/arm/mach-clps711x/Kconfig

@@ -69,17 +69,6 @@ config EP72XX_ROM_BOOT
 
 	  You almost surely want to say N here.
 
-config MACH_MP1000
-	bool "MACH_MP1000"
-	help
-	  Say Y if you intend to run the kernel on the Comdial MP1000 platform.
-
-config MP1000_90MHZ
-	bool "MP1000_90MHZ"
-	depends on MACH_MP1000
-	help
-	  Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ
-
 endmenu
 
 endif

arch/arm/mach-clps711x/Makefile

@@ -15,7 +15,6 @@ obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o
 obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
 obj-$(CONFIG_ARCH_EDB7211)  += edb7211-arch.o edb7211-mm.o
 obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
-obj-$(CONFIG_MACH_MP1000)   += mp1000-mach.o mp1000-mm.o mp1000-seprom.o
 obj-$(CONFIG_ARCH_P720T)    += p720t.o
 leds-$(CONFIG_ARCH_P720T)   += p720t-leds.o
 obj-$(CONFIG_LEDS)          += $(leds-y)

arch/arm/mach-clps711x/edb7211-mm.c

@@ -55,22 +55,22 @@ static struct map_desc edb7211_io_desc[] __initdata = {
 	 	.virtual 	= EP7211_VIRT_EXTKBD,
 		.pfn		= __phys_to_pfn(EP7211_PHYS_EXTKBD),
 		.length		= SZ_1M,
-		.type		- MT_DEVICE
+		.type		= MT_DEVICE,
 	}, {	/* and CS8900A Ethernet chip */
 		.virtual	= EP7211_VIRT_CS8900A,
 		.pfn		= __phys_to_pfn(EP7211_PHYS_CS8900A),
 		.length		= SZ_1M,
-		.type		= MT_DEVICE
+		.type		= MT_DEVICE,
 	}, { 	/* flash banks */
 		.virtual	= EP7211_VIRT_FLASH1,
 		.pfn		= __phys_to_pfn(EP7211_PHYS_FLASH1),
 		.length		= SZ_8M,
-		.type		= MT_DEVICE
+		.type		= MT_DEVICE,
 	}, {
 		.virtual	= EP7211_VIRT_FLASH2,
 		.pfn		= __phys_to_pfn(EP7211_PHYS_FLASH2),
 		.length		= SZ_8M,
-		.type		= MT_DEVICE
+		.type		= MT_DEVICE,
 	}
 };
 

arch/arm/mach-clps711x/mp1000-mach.c

-/*
- *  linux/arch/arm/mach-mp1000/mp1000.c
- *
- *  Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/string.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/arch/mp1000-seprom.h>
-
-#include "common.h"
-
-extern void mp1000_map_io(void);
-
-static void __init mp1000_init(void)
-{
-    seprom_init();
-}
-
-MACHINE_START(MP1000, "Comdial MP1000")
-	/* Maintainer: Jon Ringle */
-	.phys_ram	= 0xc0000000,
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xff000000) >> 18) & 0xfffc,
-	.boot_params	= 0xc0015100,
-	.map_io		= mp1000_map_io,
-	.init_irq	= clps711x_init_irq,
-	.init_machine	= mp1000_init,
-	.timer		= &clps711x_timer,
-MACHINE_END
-

arch/arm/mach-clps711x/mp1000-mm.c

-/*
- *  linux/arch/arm/mach-mp1000/mm.c
- *
- *  Extra MM routines for the MP1000
- *
- *  Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/hardware.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/sizes.h>
-
-#include <asm/mach/map.h>
-
-extern void clps711x_map_io(void);
-
-static struct map_desc mp1000_io_desc[] __initdata = {
-    { MP1000_EIO_BASE,	MP1000_EIO_START,	MP1000_EIO_SIZE, MT_DEVICE },
-    { MP1000_FIO_BASE,	MP1000_FIO_START,	MP1000_FIO_SIZE, MT_DEVICE },
-    { MP1000_LIO_BASE,	MP1000_LIO_START,	MP1000_LIO_SIZE, MT_DEVICE },
-    { MP1000_NIO_BASE,	MP1000_NIO_START,	MP1000_NIO_SIZE, MT_DEVICE },
-    { MP1000_IDE_BASE,	MP1000_IDE_START,	MP1000_IDE_SIZE, MT_DEVICE },
-    { MP1000_DSP_BASE,	MP1000_DSP_START,	MP1000_DSP_SIZE, MT_DEVICE }
-};
-
-void __init mp1000_map_io(void)
-{
-	clps711x_map_io();
-	iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc));
-}

arch/arm/mach-clps711x/mp1000-seprom.c

-/*`
- * mp1000-seprom.c
- *
- *  This file contains the Serial EEPROM code for the MP1000 board
- *
- *  Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <asm/hardware.h>
-#include <asm/hardware/clps7111.h>
-#include <asm/arch/mp1000-seprom.h>
-
-/* If SepromInit() can initialize and checksum the seprom successfully, */
-/* then it will point seprom_data_ptr at the shadow copy.  */
-
-static eeprom_struct seprom_data;			/* shadow copy of seprom content */
-
-eeprom_struct *seprom_data_ptr = 0;		/* 0 => not initialized */
-
-/*
- * Port D Bit 5 is Chip Select for EEPROM
- * Port E Bit 0 is Input, Data out from EEPROM
- * Port E Bit 1 is Output, Data in to EEPROM
- * Port E Bit 2 is Output, CLK to EEPROM
- */
-
-static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR);
-static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR);
-
-#define NO_OF_SHORTS	64	// Device is 64 x 16 bits
-#define ENABLE_RW	0
-#define DISABLE_RW	1
-
-static inline void toggle_seprom_clock(void)
-{
-	*port_e_ptr |= HwPortESepromCLK;
-	*port_e_ptr &= ~(HwPortESepromCLK);
-}
-
-static inline void select_eeprom(void)
-{
-	*port_d_ptr |= HwPortDEECS;
-	*port_e_ptr &= ~(HwPortESepromCLK);
-}
-
-static inline void deselect_eeprom(void)
-{
-	*port_d_ptr &= ~(HwPortDEECS);
-	*port_e_ptr &= ~(HwPortESepromDIn);
-}
-
-/*
- * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom
- *                    and returns 0 if seprom is not initialized or
- *                    has a checksum error.
- */
-
-eeprom_struct* get_seprom_ptr(void)
-{
-	return seprom_data_ptr;
-}
-
-unsigned char* get_eeprom_mac_address(void)
-{
-	return seprom_data_ptr->variant.eprom_struct.mac_Address;
-}
-
-/*
- * ReadSProm, Physically reads data from the Serial PROM
- */
-static void read_sprom(short address, int length, eeprom_struct *buffer)
-{
-	short data = COMMAND_READ | (address & 0x3F);
-	short bit;
-	int i;
-
-	select_eeprom();
-
-	// Clock in 9 bits of the command
-	for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) {
-		if (data & bit)
-			*port_e_ptr |= HwPortESepromDIn;
-		else
-			*port_e_ptr &= ~(HwPortESepromDIn);
-
-		toggle_seprom_clock();
-	}
-
-	//
-	// Now read one or more shorts of data from the Seprom
-	//
-	while (length-- > 0) {
-		data = 0;
-
-		// Read 16 bits at a time
-		for (i = 0; i < 16; i++) {
-			data <<= 1;
-			toggle_seprom_clock();
-			data |= *port_e_ptr & HwPortESepromDOut;
-
-		}
-
-		buffer->variant.eprom_short_data[address++] = data;
-	}
-
-	deselect_eeprom();
-
-	return;
-}
-
-
-
-/*
- * ReadSerialPROM
- *
- * Input: Pointer to array of 64 x 16 Bits
- *
- * Output: if no problem reading data is filled in
- */
-static void read_serial_prom(eeprom_struct *data)
-{
-	read_sprom(0, 64, data);
-}
-
-
-//
-// Compute Serial EEPROM checksum
-//
-// Input: Pointer to struct with Eprom data
-//
-// Output: The computed Eprom checksum
-//
-static short compute_seprom_checksum(eeprom_struct *data)
-{
-	short checksum = 0;
-	int i;
-
-	for (i = 0; i < 126; i++) {
-		checksum += (short)data->variant.eprom_byte_data[i];
-	}
-
-	return((short)(0x5555 - (checksum & 0xFFFF)));
-}
-
-//
-// Make sure the data port bits for the SEPROM are correctly initialised
-//
-
-void __init seprom_init(void)
-{
-	short checksum;
-
-	// Init Port D
-	*(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0;
-	*(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15;
-
-	// Init Port E
-	*(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06;
-	*(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04;
-
-	//
-	// Make sure that EEPROM struct size never exceeds 128 bytes
-	//
-	if (sizeof(eeprom_struct) > 128) {
-		panic("Serial PROM struct size > 128, aborting read\n");
-	}
-
-	read_serial_prom(&seprom_data);
-
-	checksum = compute_seprom_checksum(&seprom_data);
-
-	if (checksum != seprom_data.variant.eprom_short_data[63]) {
-		panic("Serial EEPROM checksum failed\n");
-	}
-
-	seprom_data_ptr = &seprom_data;
-}
-

arch/arm/mach-ixp2000/core.c

@@ -402,6 +402,40 @@ static void ixp2000_pci_irq_unmask(unsigned int irq)
 		ixp2000_reg_write(IXP2000_PCI_XSCALE_INT_ENABLE, (temp | (1 << 27)));
 }
 
+/*
+ * Error interrupts. These are used extensively by the microengine drivers
+ */
+static void ixp2000_err_irq_handler(unsigned int irq, struct irqdesc *desc,  struct pt_regs *regs)
+{
+	int i;
+	unsigned long status = *IXP2000_IRQ_ERR_STATUS;
+
+	for(i = 31; i >= 0; i--) {
+		if(status & (1 << i)) {
+			desc = irq_desc + IRQ_IXP2000_DRAM0_MIN_ERR + i;
+			desc->handle(IRQ_IXP2000_DRAM0_MIN_ERR + i, desc, regs);
+		}
+	}
+}
+
+static void ixp2000_err_irq_mask(unsigned int irq)
+{
+	ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_CLR,
+			(1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
+}
+
+static void ixp2000_err_irq_unmask(unsigned int irq)
+{
+	ixp2000_reg_write(IXP2000_IRQ_ERR_ENABLE_SET,
+			(1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)));
+}
+
+static struct irqchip ixp2000_err_irq_chip = {
+	.ack	= ixp2000_err_irq_mask,
+	.mask	= ixp2000_err_irq_mask,
+	.unmask	= ixp2000_err_irq_unmask
+};
+
 static struct irqchip ixp2000_pci_irq_chip = {
 	.ack	= ixp2000_pci_irq_mask,
 	.mask	= ixp2000_pci_irq_mask,
@@ -459,6 +493,18 @@ void __init ixp2000_init_irq(void)
 		} else set_irq_flags(irq, 0);
 	}
 
+	for (irq = IRQ_IXP2000_DRAM0_MIN_ERR; irq <= IRQ_IXP2000_SP_INT; irq++) {
+		if((1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR)) &
+				IXP2000_VALID_ERR_IRQ_MASK) {
+			set_irq_chip(irq, &ixp2000_err_irq_chip);
+			set_irq_handler(irq, do_level_IRQ);
+			set_irq_flags(irq, IRQF_VALID);
+		}
+		else
+			set_irq_flags(irq, 0);
+	}
+	set_irq_chained_handler(IRQ_IXP2000_ERRSUM, ixp2000_err_irq_handler);
+
 	/*
 	 * GPIO IRQs are invalid until someone sets the interrupt mode
 	 * by calling set_irq_type().

arch/arm/mach-ixp2000/enp2611.c

@@ -69,19 +69,19 @@ static struct sys_timer enp2611_timer = {
 static struct map_desc enp2611_io_desc[] __initdata = {
 	{
 		.virtual	= ENP2611_CALEB_VIRT_BASE,
-		.physical	= ENP2611_CALEB_PHYS_BASE,
+		.pfn		= __phys_to_pfn(ENP2611_CALEB_PHYS_BASE),
 		.length		= ENP2611_CALEB_SIZE,
-		.type		= MT_IXP2000_DEVICE
+		.type		= MT_IXP2000_DEVICE,
 	}, {
 		.virtual	= ENP2611_PM3386_0_VIRT_BASE,
-		.physical	= ENP2611_PM3386_0_PHYS_BASE,
+		.pfn		= __phys_to_pfn(ENP2611_PM3386_0_PHYS_BASE),
 		.length		= ENP2611_PM3386_0_SIZE,
-		.type		= MT_IXP2000_DEVICE
+		.type		= MT_IXP2000_DEVICE,
 	}, {
 		.virtual	= ENP2611_PM3386_1_VIRT_BASE,
-		.physical	= ENP2611_PM3386_1_PHYS_BASE,
+		.pfn		= __phys_to_pfn(ENP2611_PM3386_1_PHYS_BASE),
 		.length		= ENP2611_PM3386_1_SIZE,
-		.type		= MT_IXP2000_DEVICE
+		.type		= MT_IXP2000_DEVICE,
 	}
 };
 

arch/arm/mach-pxa/lubbock.c

@@ -19,16 +19,20 @@
 #include <linux/major.h>
 #include <linux/fb.h>
 #include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/irq.h>
+#include <asm/sizes.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
 
 #include <asm/hardware/sa1111.h>
 
@@ -199,10 +203,75 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+static struct resource flash_resources[] = {
+	[0] = {
+		.start	= 0x00000000,
+		.end	= SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 0x04000000,
+		.end	= 0x04000000 + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition lubbock_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	},{
+		.name =		"Kernel",
+		.size =		0x00100000,
+		.offset =	0x00040000,
+	},{
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00140000
+	}
+};
+
+static struct flash_platform_data lubbock_flash_data[2] = {
+	{
+		.map_name	= "cfi_probe",
+		.parts		= lubbock_partitions,
+		.nr_parts	= ARRAY_SIZE(lubbock_partitions),
+	}, {
+		.map_name	= "cfi_probe",
+		.parts		= NULL,
+		.nr_parts	= 0,
+	}
+};
+
+static struct platform_device lubbock_flash_device[2] = {
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 0,
+		.dev = {
+			.platform_data = &lubbock_flash_data[0],
+		},
+		.resource = &flash_resources[0],
+		.num_resources = 1,
+	},
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 1,
+		.dev = {
+			.platform_data = &lubbock_flash_data[1],
+		},
+		.resource = &flash_resources[1],
+		.num_resources = 1,
+	},
+};
+
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
 	&lub_audio_device,
 	&smc91x_device,
+	&lubbock_flash_device[0],
+	&lubbock_flash_device[1],
 };
 
 static struct pxafb_mach_info sharp_lm8v31 __initdata = {
@@ -315,10 +384,21 @@ static struct pxaficp_platform_data lubbock_ficp_platform_data = {
 
 static void __init lubbock_init(void)
 {
+	int flashboot = (LUB_CONF_SWITCHES & 1);
+
 	pxa_set_udc_info(&udc_info);
 	set_pxa_fb_info(&sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
 	pxa_set_ficp_info(&lubbock_ficp_platform_data);
+
+	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
+		(BOOT_DEF & 1) ? 2 : 4;
+	/* Compensate for the nROMBT switch which swaps the flash banks */
+	printk(KERN_NOTICE "Lubbock configured to boot from %s (bank %d)\n",
+	       flashboot?"Flash":"ROM", flashboot);
+
+	lubbock_flash_data[flashboot^1].name = "application-flash";
+	lubbock_flash_data[flashboot].name = "boot-rom";
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 

arch/arm/mach-pxa/mainstone.c

@@ -20,6 +20,9 @@
 #include <linux/sched.h>
 #include <linux/bitops.h>
 #include <linux/fb.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
@@ -27,10 +30,12 @@
 #include <asm/mach-types.h>
 #include <asm/hardware.h>
 #include <asm/irq.h>
+#include <asm/sizes.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
 
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/mainstone.h>
@@ -190,6 +195,69 @@ static struct platform_device mst_audio_device = {
 	.dev		= { .platform_data = &mst_audio_ops },
 };
 
+static struct resource flash_resources[] = {
+	[0] = {
+		.start	= PXA_CS0_PHYS,
+		.end	= PXA_CS0_PHYS + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PXA_CS1_PHYS,
+		.end	= PXA_CS1_PHYS + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition mainstoneflash0_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE  /* force read-only */
+	},{
+		.name =		"Kernel",
+		.size =		0x00400000,
+		.offset =	0x00040000,
+	},{
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00440000
+	}
+};
+
+static struct flash_platform_data mst_flash_data[2] = {
+	{
+		.map_name	= "cfi_probe",
+		.parts		= mainstoneflash0_partitions,
+		.nr_parts	= ARRAY_SIZE(mainstoneflash0_partitions),
+	}, {
+		.map_name	= "cfi_probe",
+		.parts		= NULL,
+		.nr_parts	= 0,
+	}
+};
+
+static struct platform_device mst_flash_device[2] = {
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 0,
+		.dev = {
+			.platform_data = &mst_flash_data[0],
+		},
+		.resource = &flash_resources[0],
+		.num_resources = 1,
+	},
+	{
+		.name		= "pxa2xx-flash",
+		.id		= 1,
+		.dev = {
+			.platform_data = &mst_flash_data[1],
+		},
+		.resource = &flash_resources[1],
+		.num_resources = 1,
+	},
+};
+
 static void mainstone_backlight_power(int on)
 {
 	if (on) {
@@ -318,16 +386,34 @@ static struct pxaficp_platform_data mainstone_ficp_platform_data = {
 	.transceiver_mode = mainstone_irda_transceiver_mode,
 };
 
+static struct platform_device *platform_devices[] __initdata = {
+	&smc91x_device,
+	&mst_audio_device,
+	&mst_flash_device[0],
+	&mst_flash_device[1],
+};
+
 static void __init mainstone_init(void)
 {
+	int SW7 = 0;  /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
+
+	mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
+	mst_flash_data[1].width = 4;
+
+	/* Compensate for SW7 which swaps the flash banks */
+	mst_flash_data[SW7].name = "processor-flash";
+	mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
+
+	printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
+	       mst_flash_data[0].name);
+
 	/*
 	 * On Mainstone, we route AC97_SYSCLK via GPIO45 to
 	 * the audio daughter card
 	 */
 	pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
 
-	platform_device_register(&smc91x_device);
-	platform_device_register(&mst_audio_device);
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 	/* reading Mainstone's "Virtual Configuration Register"
 	   might be handy to select LCD type here */

arch/arm/mm/Kconfig

@@ -250,6 +250,18 @@ config CPU_V6
 	select CPU_COPY_V6
 	select CPU_TLB_V6
 
+# ARMv6k
+config CPU_32v6K
+	bool "Support ARM V6K processor extensions" if !SMP
+	depends on CPU_V6
+	default y if SMP
+	help
+	  Say Y here if your ARMv6 processor supports the 'K' extension.
+	  This enables the kernel to use some instructions not present
+	  on previous processors, and as such a kernel build with this
+	  enabled will not boot on processors with do not support these
+	  instructions.
+
 # Figure out what processor architecture version we should be using.
 # This defines the compiler instruction set which depends on the machine type.
 config CPU_32v3

arch/arm/mm/mm-armv.c

@@ -469,14 +469,14 @@ void __init create_mapping(struct map_desc *md)
 
 	if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
 		printk(KERN_WARNING "BUG: not creating mapping for "
-		       "0x%016llx at 0x%08lx in user region\n",
+		       "0x%08llx at 0x%08lx in user region\n",
 		       __pfn_to_phys((u64)md->pfn), md->virtual);
 		return;
 	}
 
 	if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
 	    md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
-		printk(KERN_WARNING "BUG: mapping for 0x%016llx at 0x%08lx "
+		printk(KERN_WARNING "BUG: mapping for 0x%08llx at 0x%08lx "
 		       "overlaps vmalloc space\n",
 		       __pfn_to_phys((u64)md->pfn), md->virtual);
 	}
@@ -492,14 +492,14 @@ void __init create_mapping(struct map_desc *md)
 	if(md->pfn >= 0x100000) {
 		if(domain) {
 			printk(KERN_ERR "MM: invalid domain in supersection "
-				"mapping for 0x%016llx at 0x%08lx\n",
+				"mapping for 0x%08llx at 0x%08lx\n",
 				__pfn_to_phys((u64)md->pfn), md->virtual);
 			return;
 		}
 		if((md->virtual | md->length | __pfn_to_phys(md->pfn))
 			& ~SUPERSECTION_MASK) {
 			printk(KERN_ERR "MM: cannot create mapping for "
-				"0x%016llx at 0x%08lx invalid alignment\n",
+				"0x%08llx at 0x%08lx invalid alignment\n",
 				__pfn_to_phys((u64)md->pfn), md->virtual);
 			return;
 		}

drivers/char/nvram.c

@@ -32,11 +32,9 @@
  * 		added changelog
  * 	1.2	Erik Gilling: Cobalt Networks support
  * 		Tim Hockin: general cleanup, Cobalt support
- * 	1.3	Jon Ringle: Comdial MP1000 support
- *
  */
 
-#define NVRAM_VERSION	"1.3"
+#define NVRAM_VERSION	"1.2"
 
 #include <linux/module.h>
 #include <linux/config.h>
@@ -47,7 +45,6 @@
 #define PC		1
 #define ATARI		2
 #define COBALT		3
-#define MP1000		4
 
 /* select machine configuration */
 #if defined(CONFIG_ATARI)
@@ -57,9 +54,6 @@
 #  if defined(CONFIG_COBALT)
 #    include <linux/cobalt-nvram.h>
 #    define MACH COBALT
-#  elif defined(CONFIG_MACH_MP1000)
-#    undef MACH
-#    define MACH MP1000
 #  else
 #    define MACH PC
 #  endif
@@ -118,23 +112,6 @@
 
 #endif
 
-#if MACH == MP1000
-
-/* RTC in a MP1000 */
-#define CHECK_DRIVER_INIT()	1
-
-#define MP1000_CKS_RANGE_START	0
-#define MP1000_CKS_RANGE_END	111
-#define MP1000_CKS_LOC		112
-
-#define NVRAM_BYTES		(128-NVRAM_FIRST_BYTE)
-
-#define mach_check_checksum	mp1000_check_checksum
-#define mach_set_checksum	mp1000_set_checksum
-#define mach_proc_infos		mp1000_proc_infos
-
-#endif
-
 /* Note that *all* calls to CMOS_READ and CMOS_WRITE must be done with
  * rtc_lock held. Due to the index-port/data-port design of the RTC, we
  * don't want two different things trying to get to it at once. (e.g. the
@@ -938,91 +915,6 @@ atari_proc_infos(unsigned char *nvram, char *buffer, int *len,
 
 #endif /* MACH == ATARI */
 
-#if MACH == MP1000
-
-static int
-mp1000_check_checksum(void)
-{
-	int i;
-	unsigned short sum = 0;
-	unsigned short expect;
-
-	for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i)
-		sum += __nvram_read_byte(i);
-
-        expect = __nvram_read_byte(MP1000_CKS_LOC+1)<<8 |
-	    __nvram_read_byte(MP1000_CKS_LOC);
-	return ((sum & 0xffff) == expect);
-}
-
-static void
-mp1000_set_checksum(void)
-{
-	int i;
-	unsigned short sum = 0;
-
-	for (i = MP1000_CKS_RANGE_START; i <= MP1000_CKS_RANGE_END; ++i)
-		sum += __nvram_read_byte(i);
-	__nvram_write_byte(sum >> 8, MP1000_CKS_LOC + 1);
-	__nvram_write_byte(sum & 0xff, MP1000_CKS_LOC);
-}
-
-#ifdef CONFIG_PROC_FS
-
-#define         SERVER_N_LEN         32
-#define         PATH_N_LEN           32
-#define         FILE_N_LEN           32
-#define         NVRAM_MAGIC_SIG      0xdead
-
-typedef struct NvRamImage
-{
-	unsigned short int    magic;
-	unsigned short int    mode;
-	char                  fname[FILE_N_LEN];
-	char                  path[PATH_N_LEN];
-	char                  server[SERVER_N_LEN];
-	char                  pad[12];
-} NvRam;
-
-static int
-mp1000_proc_infos(unsigned char *nvram, char *buffer, int *len,
-    off_t *begin, off_t offset, int size)
-{
-	int checksum;
-        NvRam* nv = (NvRam*)nvram;
-
-	spin_lock_irq(&rtc_lock);
-	checksum = __nvram_check_checksum();
-	spin_unlock_irq(&rtc_lock);
-
-	PRINT_PROC("Checksum status: %svalid\n", checksum ? "" : "not ");
-
-        switch( nv->mode )
-        {
-           case 0 :
-                    PRINT_PROC( "\tMode 0, tftp prompt\n" );
-                    break;
-           case 1 :
-                    PRINT_PROC( "\tMode 1, booting from disk\n" );
-                    break;
-           case 2 :
-                    PRINT_PROC( "\tMode 2, Alternate boot from disk /boot/%s\n", nv->fname );
-                    break;
-           case 3 :
-                    PRINT_PROC( "\tMode 3, Booting from net:\n" );
-                    PRINT_PROC( "\t\t%s:%s%s\n",nv->server, nv->path, nv->fname );
-                    break;
-           default:
-                    PRINT_PROC( "\tInconsistant nvram?\n" );
-                    break;
-        }
-
-	return 1;
-}
-#endif
-
-#endif /* MACH == MP1000 */
-
 MODULE_LICENSE("GPL");
 
 EXPORT_SYMBOL(__nvram_read_byte);

drivers/net/Kconfig

@@ -1374,7 +1374,7 @@ config FORCEDETH
 
 config CS89x0
 	tristate "CS89x0 support"
-	depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105 || MACH_MP1000
+	depends on (NET_PCI && (ISA || ARCH_IXDP2X01)) || ARCH_PNX0105
 	---help---
 	  Support for CS89x0 chipset based Ethernet cards. If you have a
 	  network (Ethernet) card of this type, say Y and read the

drivers/net/cs89x0.c

@@ -182,10 +182,6 @@ static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
 #define CIRRUS_DEFAULT_IRQ	VH_INTC_INT_NUM_CASCADED_INTERRUPT_1 /* Event inputs bank 1 - ID 35/bit 3 */
 static unsigned int netcard_portlist[] __initdata = {CIRRUS_DEFAULT_BASE, 0};
 static unsigned int cs8900_irq_map[] = {CIRRUS_DEFAULT_IRQ, 0, 0, 0};
-#elif defined(CONFIG_MACH_MP1000)
-#include <asm/arch/mp1000-seprom.h>
-static unsigned int netcard_portlist[] __initdata = {MP1000_EIO_BASE+0x300, 0};
-static unsigned int cs8900_irq_map[] = {IRQ_EINT3,0,0,0};
 #else
 static unsigned int netcard_portlist[] __initdata =
    { 0x300, 0x320, 0x340, 0x360, 0x200, 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x2e0, 0};
@@ -594,10 +590,6 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 			cnt -= j;
 		}
 	} else
-#elif defined(CONFIG_MACH_MP1000)
-	if (1) {
-		memcpy(dev->dev_addr, get_eeprom_mac_address(), ETH_ALEN);
-	} else
 #endif
 
         if ((readreg(dev, PP_SelfST) & (EEPROM_OK | EEPROM_PRESENT)) == 
@@ -657,10 +649,6 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 	if (1) {
 		printk(KERN_NOTICE "cs89x0: No EEPROM on HiCO.SH4\n");
 	} else
-#elif defined(CONFIG_MACH_MP1000)
-	if (1) {
-		lp->force |= FORCE_RJ45;
-	} else
 #endif
 	if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
 		printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n");
@@ -1243,7 +1231,7 @@ net_open(struct net_device *dev)
 	else
 #endif
 	{
-#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105) && !defined(CONFIG_MACH_MP1000)
+#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105)
 		if (((1 << dev->irq) & lp->irq_map) == 0) {
 			printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
                                dev->name, dev->irq, lp->irq_map);

drivers/net/cs89x0.h

@@ -16,7 +16,7 @@
 
 #include <linux/config.h>
 
-#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105) || defined (CONFIG_MACH_MP1000)
+#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105)
 /* IXDP2401/IXDP2801 uses dword-aligned register addressing */
 #define CS89x0_PORT(reg) ((reg) * 2)
 #else

drivers/serial/clps711x.c

@@ -408,11 +408,7 @@ static struct uart_port clps711x_ports[UART_NR] = {
 	{
 		.iobase		= SYSCON1,
 		.irq		= IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
-#ifdef CONFIG_MP1000_90MHZ
-		.uartclk	= 4515840,
-#else
 		.uartclk	= 3686400,
-#endif
 		.fifosize	= 16,
 		.ops		= &clps711x_pops,
 		.line		= 0,
@@ -421,11 +417,7 @@ static struct uart_port clps711x_ports[UART_NR] = {
 	{
 		.iobase		= SYSCON2,
 		.irq		= IRQ_UTXINT2, /* IRQ_URXINT2 */
-#ifdef CONFIG_MP1000_90MHZ
-		.uartclk	= 4515840,
-#else
 		.uartclk	= 3686400,
-#endif
 		.fifosize	= 16,
 		.ops		= &clps711x_pops,
 		.line		= 1,
@@ -559,7 +551,6 @@ console_initcall(clps711xuart_console_init);
 static struct uart_driver clps711x_reg = {
 	.driver_name		= "ttyCL",
 	.dev_name		= "ttyCL",
-	.devfs_name		= "ttyCL",
 	.major			= SERIAL_CLPS711X_MAJOR,
 	.minor			= SERIAL_CLPS711X_MINOR,
 	.nr			= UART_NR,

include/asm-arm/arch-clps711x/hardware.h

@@ -235,121 +235,4 @@
 #define CEIVA_PB0_BLK_BTN	(1<<0)
 #endif // #if defined (CONFIG_ARCH_CEIVA)
 
-#if defined (CONFIG_MACH_MP1000)
-/* NOR FLASH */
-#define MP1000_NIO_BASE		0xf9000000	/* virtual */
-#define MP1000_NIO_START	CS0_PHYS_BASE	/* physical */
-#define MP1000_NIO_SIZE		0x00400000
-
-/* DSP Interface */
-#define MP1000_DSP_BASE		0xfa000000	/* virtual */
-#define MP1000_DSP_START	CS1_PHYS_BASE	/* physical */
-#define MP1000_DSP_SIZE		0x00100000
-
-/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */
-#define MP1000_LIO_BASE		0xfb000000	/* virtual */
-#define MP1000_LIO_START	CS2_PHYS_BASE	/* physical */
-#define MP1000_LIO_SIZE		0x00100000
-
-/* NAND FLASH */
-#define MP1000_FIO_BASE		0xfc000000	/* virtual */
-#define MP1000_FIO_START	CS3_PHYS_BASE	/* physical */
-#define MP1000_FIO_SIZE		0x00800000
-
-/* Ethernet */
-#define MP1000_EIO_BASE		0xfd000000	/* virtual 	*/
-#define MP1000_EIO_START	CS4_PHYS_BASE	/* physical 	*/
-#define MP1000_EIO_SIZE		0x00100000
-
-#define	MP1000_LCD_OFFSET	0x00000000	/* LCD offset in CS2 */
-#define	MP1000_DDD_OFFSET	0x00001000	/* DAA/DAI/DSP sft reset offst*/
-#define	MP1000_RTC_OFFSET	0x00002000	/* RTC offset in CS2 */
-#define	MP1000_DAA_OFFSET	0x00003000	/* DAA RW reg offset in CS2 */
-
-/* IDE */
-#define MP1000_IDE_BASE		0xfe000000      /* virtual */
-#define MP1000_IDE_START	CS5_PHYS_BASE      /* physical */
-#define MP1000_IDE_SIZE		0x00100000      /* actually it's only 0x1000 */
-
-#define IRQ_HARDDISK IRQ_EINT2
-
-/*
- * IDE registers definition
- */
-
-#define IDE_CONTROL_BASE		(MP1000_IDE_BASE + 0x1000)
-#define IDE_BASE_OFF			(MP1000_IDE_BASE)
-
-#define IDE_WRITE_DEVICE_DATA		(IDE_BASE_OFF + 0x0)
-#define IDE_FEATURES_REGISTER		(IDE_BASE_OFF + 0x2)
-#define IDE_SECTOR_COUNT_REGISTER	(IDE_BASE_OFF + 0x4)
-#define IDE_SECTOR_NUMBER_REGISTER	(IDE_BASE_OFF + 0x6)
-#define IDE_CYLINDER_LOW_REGISTER	(IDE_BASE_OFF + 0x8)
-#define IDE_CYLINDER_HIGH_REGISTER	(IDE_BASE_OFF + 0xa)
-#define IDE_DEVICE_HEAD_REGISTER	(IDE_BASE_OFF + 0xc)
-#define IDE_COMMAND_DATA_REGISTER	(IDE_BASE_OFF + 0xe)
-#define IDE_DEVICE_CONTROL_REGISTER	(IDE_CONTROL_BASE + 0xc)
-
-#define IDE_IRQ                      IRQ_EINT2
-
-
-#define RTC_PORT(x)	(MP1000_LIO_BASE+0x2000 + (x*2))
-#define RTC_ALWAYS_BCD	0
-
-/*
-// Definitions of the bit fields in the HwPortA register for the
-// MP1000 board.
-*/
-#define HwPortAKeyboardRow1                     0x00000001
-#define HwPortAKeyboardRow2                     0x00000002
-#define HwPortAKeyboardRow3                     0x00000004
-#define HwPortAKeyboardRow4                     0x00000008
-#define HwPortAKeyboardRow5                     0x00000010
-#define HwPortAKeyboardRow6                     0x00000020
-#define HwPortALCDEnable                        0x00000040
-#define HwPortAOffhook	                        0x00000080
-
-/*
-// Definitions of the bit fields in the HwPortB register for the
-// MP1000 board.
-*/
-#define HwPortBL3Mode                           0x00000001
-#define HwPortBL3Clk                            0x00000002
-#define HwPortBSClk                             0x00000001
-#define HwPortBSData                            0x00000002
-#define HwPortBL3Data                           0x00000004
-#define HwPortBMute                             0x00000008
-#define HwPortBQD0                              0x00000010
-#define HwPortBQD1                              0x00000020
-#define HwPortBQD2                              0x00000040
-#define HwPortBQD3                              0x00000080
-
-/*
-// Definitions of the bit fields in the HwPortD register for the
-// MP1000 board.
-*/
-#define HwPortDLED1                             0x00000001
-#define HwPortDLED2                             0x00000002
-#define HwPortDLED3                             0x00000004
-#define HwPortDLED4                             0x00000008
-#define HwPortDLED5                             0x00000010
-#define HwPortDEECS                             0x00000020
-#define HwPortBRTS                              0x00000040
-#define HwPortBRI                               0x00000080
-
-
-/*
-// Definitions of the bit fields in the HwPortE register for the
-// MP1000 board.
-*/
-
-#define HwPortECLE                              0x00000001
-#define HwPortESepromDOut                       0x00000001
-#define HwPortEALE                              0x00000002
-#define HwPortESepromDIn                        0x00000002
-#define HwPortENANDCS                           0x00000004
-#define HwPortESepromCLK                        0x00000004
-
-#endif // #if defined (CONFIG_MACH_MP1000)
-
 #endif

include/asm-arm/arch-clps711x/mp1000-seprom.h

-#ifndef MP1000_SEPROM_H
-#define MP1000_SEPROM_H
-
-/*
- * mp1000-seprom.h
- *
- *
- *  This file contains the Serial EEPROM definitions for the MP1000 board
- *
- *  Copyright (C) 2005 Comdial Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#define COMMAND_ERASE		(0x1C0)
-#define COMMAND_ERASE_ALL	(0x120)
-#define COMMAND_WRITE_DISABLE	(0x100)
-#define COMMAND_WRITE_ENABLE	(0x130)
-#define COMMAND_READ		(0x180)
-#define COMMAND_WRITE		(0x140)
-#define COMMAND_WRITE_ALL	(0x110)
-
-//
-// Serial EEPROM data format
-//
-
-#define PACKED __attribute__ ((packed))
-
-typedef struct _EEPROM {
-	union {
-		unsigned char eprom_byte_data[128];
-		unsigned short eprom_short_data[64];
-		struct {
-			unsigned char version PACKED;	// EEPROM Version "1" for now
-			unsigned char box_id PACKED; 	// Box ID (Standalone, SOHO, embedded, etc)
-			unsigned char major_hw_version PACKED;	// Major Hardware version (Hex)
-			unsigned char minor_hw_version PACKED;	// Minor Hardware Version (Hex)
-			unsigned char mfg_id[3] PACKED;	// Manufacturer ID (3 character Alphabetic)
-			unsigned char mfg_serial_number[10] PACKED;	// Manufacturer Serial number
-			unsigned char mfg_date[3] PACKED;	// Date of Mfg (Formatted YY:MM:DD)
-			unsigned char country PACKED;	// Country of deployment
-			unsigned char mac_Address[6] PACKED;	// MAC Address
-			unsigned char oem_string[20] PACKED;	// OEM ID string
-			unsigned short feature_bits1 PACKED;	// Feature Bits 1
-			unsigned short feature_bits2 PACKED;	// Feature Bits 2
-			unsigned char filler[75] PACKED;		// Unused/Undefined	0 initialized
-			unsigned short checksum PACKED;		// byte accumulated short checksum
-		} eprom_struct;
-	} variant;
-}  eeprom_struct;
-
-/* These settings must be mutually exclusive */
-#define	FEATURE_BITS1_DRAMSIZE_16MEG	0x0001  /* 0 signifies 4 MEG system */
-#define	FEATURE_BITS1_DRAMSIZE_8MEG	0x0002  /* 1 in bit 1 = 8MEG system */
-#define	FEATURE_BITS1_DRAMSIZE_64MEG	0x0004  /* 1 in bit 2 = 64MEG system */
-
-#define FEATURE_BITS1_CPUIS90MEG     0x0010
-
-extern void seprom_init(void);
-extern eeprom_struct* get_seprom_ptr(void);
-extern unsigned char* get_eeprom_mac_address(void);
-
-#endif /* MP1000_SEPROM_H */
-

include/asm-arm/arch-iop3xx/iop321.h

@@ -40,7 +40,7 @@
 #define IOP321_PCI_UPPER_IO_BA      (IOP321_PCI_LOWER_IO_BA + IOP321_PCI_IO_WINDOW_SIZE - 1)
 #define IOP321_PCI_IO_OFFSET        (IOP321_PCI_LOWER_IO_VA - IOP321_PCI_LOWER_IO_BA)
 
-//#define IOP321_PCI_MEM_WINDOW_SIZE  (~*IOP321_IALR1 + 1)
+/* #define IOP321_PCI_MEM_WINDOW_SIZE  (~*IOP321_IALR1 + 1) */
 #define IOP321_PCI_MEM_WINDOW_SIZE  0x04000000 /* 64M outbound window */
 #define IOP321_PCI_LOWER_MEM_PA     0x80000000
 #define IOP321_PCI_LOWER_MEM_BA     (*IOP321_OMWTVR0)

include/asm-arm/arch-ixp2000/irqs.h

@@ -67,12 +67,45 @@
 #define IRQ_IXP2000_PCIA		40
 #define IRQ_IXP2000_PCIB		41
 
-#define NR_IXP2000_IRQS                 42
+/* Int sources from IRQ_ERROR_STATUS */
+#define IRQ_IXP2000_DRAM0_MIN_ERR	42
+#define IRQ_IXP2000_DRAM0_MAJ_ERR	43
+#define IRQ_IXP2000_DRAM1_MIN_ERR	44
+#define IRQ_IXP2000_DRAM1_MAJ_ERR	45
+#define IRQ_IXP2000_DRAM2_MIN_ERR	46
+#define IRQ_IXP2000_DRAM2_MAJ_ERR	47
+/* 48-57 reserved */
+#define IRQ_IXP2000_SRAM0_ERR		58
+#define IRQ_IXP2000_SRAM1_ERR		59
+#define IRQ_IXP2000_SRAM2_ERR		60
+#define IRQ_IXP2000_SRAM3_ERR		61
+/* 62-65 reserved */
+#define IRQ_IXP2000_MEDIA_ERR		66
+#define IRQ_IXP2000_PCI_ERR			67
+#define IRQ_IXP2000_SP_INT			68
+
+#define NR_IXP2000_IRQS				69
 
 #define	IXP2000_BOARD_IRQ(x)		(NR_IXP2000_IRQS + (x))
 
 #define	IXP2000_BOARD_IRQ_MASK(irq)	(1 << (irq - NR_IXP2000_IRQS))	
 
+#define IXP2000_ERR_IRQ_MASK(irq) ( 1 << (irq - IRQ_IXP2000_DRAM0_MIN_ERR))
+#define IXP2000_VALID_ERR_IRQ_MASK (\
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM0_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM1_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MIN_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_DRAM2_MAJ_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM0_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM1_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM2_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SRAM3_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_MEDIA_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_PCI_ERR) | \
+		IXP2000_ERR_IRQ_MASK(IRQ_IXP2000_SP_INT)	)
+
 /*
  * This allows for all the on-chip sources plus up to 32 CPLD based
  * IRQs. Should be more than enough.

include/asm-arm/mmu_context.h

@@ -86,7 +86,8 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		cpu_set(cpu, next->cpu_vm_mask);
 		check_context(next);
 		cpu_switch_mm(next->pgd, next);
-		cpu_clear(cpu, prev->cpu_vm_mask);
+		if (cache_is_vivt())
+			cpu_clear(cpu, prev->cpu_vm_mask);
 	}
 }