IB: Use menuconfig for InfiniBand menu

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.
Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

drivers/infiniband/Kconfig

-menu "InfiniBand support"
-	depends on HAS_IOMEM
-
-config INFINIBAND
-	depends on PCI || BROKEN
+menuconfig INFINIBAND
 	tristate "InfiniBand support"
+	depends on PCI || BROKEN
+	depends on HAS_IOMEM
 	---help---
 	  Core support for InfiniBand (IB).  Make sure to also select
 	  any protocols you wish to use as well as drivers for your
 	  InfiniBand hardware.
 
+if INFINIBAND
+
 config INFINIBAND_USER_MAD
 	tristate "InfiniBand userspace MAD support"
 	depends on INFINIBAND
@@ -20,7 +20,6 @@ config INFINIBAND_USER_MAD
 
 config INFINIBAND_USER_ACCESS
 	tristate "InfiniBand userspace access (verbs and CM)"
-	depends on INFINIBAND
 	---help---
 	  Userspace InfiniBand access support.  This enables the
 	  kernel side of userspace verbs and the userspace
@@ -37,7 +36,7 @@ config INFINIBAND_USER_MEM
 
 config INFINIBAND_ADDR_TRANS
 	bool
-	depends on INFINIBAND && INET
+	depends on INET
 	default y
 
 source "drivers/infiniband/hw/mthca/Kconfig"
@@ -54,4 +53,4 @@ source "drivers/infiniband/ulp/srp/Kconfig"
 
 source "drivers/infiniband/ulp/iser/Kconfig"
 
-endmenu
+endif # INFINIBAND

drivers/infiniband/hw/amso1100/Kconfig

 config INFINIBAND_AMSO1100
 	tristate "Ammasso 1100 HCA support"
-	depends on PCI && INET && INFINIBAND
+	depends on PCI && INET
 	---help---
 	  This is a low-level driver for the Ammasso 1100 host
 	  channel adapter (HCA).

drivers/infiniband/hw/cxgb3/Kconfig

 config INFINIBAND_CXGB3
 	tristate "Chelsio RDMA Driver"
-	depends on CHELSIO_T3 && INFINIBAND && INET
+	depends on CHELSIO_T3 && INET
 	select GENERIC_ALLOCATOR
 	---help---
 	  This is an iWARP/RDMA driver for the Chelsio T3 1GbE and

drivers/infiniband/hw/ehca/Kconfig

 config INFINIBAND_EHCA
 	tristate "eHCA support"
-	depends on IBMEBUS && INFINIBAND
+	depends on IBMEBUS
 	---help---
 	This driver supports the IBM pSeries eHCA InfiniBand adapter.
 

drivers/infiniband/hw/ipath/Kconfig

 config INFINIBAND_IPATH
 	tristate "QLogic InfiniPath Driver"
-	depends on (PCI_MSI || HT_IRQ) && 64BIT && INFINIBAND && NET
+	depends on (PCI_MSI || HT_IRQ) && 64BIT && NET
 	---help---
 	This is a driver for QLogic InfiniPath host channel adapters,
 	including InfiniBand verbs support.  This driver allows these

drivers/infiniband/hw/mlx4/Kconfig

 config MLX4_INFINIBAND
 	tristate "Mellanox ConnectX HCA support"
-	depends on INFINIBAND
 	select MLX4_CORE
 	---help---
 	  This driver provides low-level InfiniBand support for

drivers/infiniband/hw/mthca/Kconfig

 config INFINIBAND_MTHCA
 	tristate "Mellanox HCA support"
-	depends on PCI && INFINIBAND
+	depends on PCI
 	---help---
 	  This is a low-level driver for Mellanox InfiniHost host
 	  channel adapters (HCAs), including the MT23108 PCI-X HCA

drivers/infiniband/ulp/ipoib/Kconfig

 config INFINIBAND_IPOIB
 	tristate "IP-over-InfiniBand"
-	depends on INFINIBAND && NETDEVICES && INET && (IPV6 || IPV6=n)
+	depends on NETDEVICES && INET && (IPV6 || IPV6=n)
 	---help---
 	  Support for the IP-over-InfiniBand protocol (IPoIB). This
 	  transports IP packets over InfiniBand so you can use your IB

drivers/infiniband/ulp/iser/Kconfig

 config INFINIBAND_ISER
 	tristate "iSCSI Extensions for RDMA (iSER)"
-	depends on INFINIBAND && SCSI && INET
+	depends on SCSI && INET
 	select SCSI_ISCSI_ATTRS
 	---help---
 	  Support for the iSCSI Extensions for RDMA (iSER) Protocol

drivers/infiniband/ulp/srp/Kconfig

 config INFINIBAND_SRP
 	tristate "InfiniBand SCSI RDMA Protocol"
-	depends on INFINIBAND && SCSI
+	depends on SCSI
 	---help---
 	  Support for the SCSI RDMA Protocol over InfiniBand.  This
 	  allows you to access storage devices that speak SRP over