Commit 06dfaf1d authored by Maxime Ripard's avatar Maxime Ripard

ARM: dts: sunxi: Add missing LVDS resets and clocks

Some old SoCs, while supporting LVDS, don't list the LVDS clocks and reset
lines. Let's add them when relevant.
Acked-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
parent 0a934343
......@@ -286,14 +286,18 @@ tcon0: lcd-controller@1c0c000 {
reg = <0x01c0c000 0x1000>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 11>;
resets = <&ccu RST_AHB1_LCD0>;
reset-names = "lcd";
resets = <&ccu RST_AHB1_LCD0>,
<&ccu RST_AHB1_LVDS>;
reset-names = "lcd",
"lvds";
clocks = <&ccu CLK_AHB1_LCD0>,
<&ccu CLK_LCD0_CH0>,
<&ccu CLK_LCD0_CH1>;
<&ccu CLK_LCD0_CH1>,
<&ccu 15>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
"tcon-ch1",
"lvds-alt";
clock-output-names = "tcon0-pixel-clock";
#clock-cells = <0>;
......@@ -336,14 +340,17 @@ tcon1: lcd-controller@1c0d000 {
reg = <0x01c0d000 0x1000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 12>;
resets = <&ccu RST_AHB1_LCD1>;
reset-names = "lcd";
resets = <&ccu RST_AHB1_LCD1>,
<&ccu RST_AHB1_LVDS>;
reset-names = "lcd", "lvds";
clocks = <&ccu CLK_AHB1_LCD1>,
<&ccu CLK_LCD1_CH0>,
<&ccu CLK_LCD1_CH1>;
<&ccu CLK_LCD1_CH1>,
<&ccu 15>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
"tcon-ch1",
"lvds-alt";
clock-output-names = "tcon1-pixel-clock";
#clock-cells = <0>;
......
......@@ -184,13 +184,17 @@ tcon0: lcd-controller@1c0c000 {
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&dma 12>;
clocks = <&ccu CLK_BUS_LCD>,
<&ccu CLK_LCD_CH0>;
<&ccu CLK_LCD_CH0>,
<&ccu 13>;
clock-names = "ahb",
"tcon-ch0";
"tcon-ch0",
"lvds-alt";
clock-output-names = "tcon-pixel-clock";
#clock-cells = <0>;
resets = <&ccu RST_BUS_LCD>;
reset-names = "lcd";
resets = <&ccu RST_BUS_LCD>,
<&ccu RST_BUS_LVDS>;
reset-names = "lcd",
"lvds";
status = "disabled";
ports {
......
......@@ -878,8 +878,12 @@ tcon0: lcd-controller@3c00000 {
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
clock-names = "ahb", "tcon-ch0";
resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>;
reset-names = "lcd", "edp";
resets = <&ccu RST_BUS_LCD0>,
<&ccu RST_BUS_EDP>,
<&ccu RST_BUS_LVDS>;
reset-names = "lcd",
"edp",
"lvds";
clock-output-names = "tcon0-pixel-clock";
#clock-cells = <0>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment