V4L/DVB (13260): saa7134: add support for Leadtek Winfast DTV-1000S remote control

Signed-off-by: Michael Obst <mike.obst@gmail.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/common/ir-keymaps.c

@@ -1705,6 +1705,7 @@ static struct ir_scancode ir_codes_winfast[] = {
 	{ 0x37, KEY_RADIO },		/* FM */
 	{ 0x38, KEY_DVD },
 
+	{ 0x1a, KEY_MODE},		/* change to MCE mode on Y04G0051 */
 	{ 0x3e, KEY_F21 },		/* MCE +VOL, on Y04G0033 */
 	{ 0x3a, KEY_F22 },		/* MCE -VOL, on Y04G0033 */
 	{ 0x3b, KEY_F23 },		/* MCE +CH,  on Y04G0033 */

drivers/media/video/saa7134/saa7134-cards.c

@@ -6801,6 +6801,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 	case SAA7134_BOARD_KWORLD_PLUS_TV_ANALOG:
 	case SAA7134_BOARD_AVERMEDIA_GO_007_FM_PLUS:
 	case SAA7134_BOARD_ROVERMEDIA_LINK_PRO_FM:
+	case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
 		dev->has_remote = SAA7134_REMOTE_GPIO;
 		break;
 	case SAA7134_BOARD_FLYDVBS_LR300:

drivers/media/video/saa7134/saa7134-input.c

@@ -616,6 +616,12 @@ int saa7134_input_init1(struct saa7134_dev *dev)
 		mask_keycode = 0x003f00;
 		mask_keydown = 0x040000;
 		break;
+	case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
+		ir_codes     = &ir_codes_winfast_table;
+		mask_keycode = 0x5f00;
+		mask_keyup   = 0x020000;
+		polling      = 50; // ms
+		break;
 	}
 	if (NULL == ir_codes) {
 		printk("%s: Oops: IR config error [card=%d]\n",