Skip to content

L
linux
Commit 072a4fd2 authored by Olof Johansson's avatar Olof Johansson
Browse files
Options

Merge tag 'imx-dt-3.16' of... 

Merge tag 'imx-dt-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Merge "ARM: imx: device tree changes for 3.16" from Shawn Guo:

i.MX device tree changes for 3.16:
 - New board support: imx35-pdk, imx51-digi-connectcore, imx6dl-phytec,
   imx6dl-riotboard, and vf610-colibri.
 - Improve device tree support for imx51-babbage and eukrea-cpuimx51 to
   get the same level support as board files, so that we can kill the
   board files.
 - Quite some updates on imx27-phytec-phycore board support from
   Alexander Shiyan
 - Enable USB, sound and touchscreen on the eukrea imx25/35/51 boards,
   from Denis Carikli
 - Quite a lot of patches from Fabio Estevam, updating Freescale
   imx25-pdk and imx27-pdk board support
 - Correct USB device configuration for imx25/35
 - Fixes i2c4 device node in imx6dl.dtsi regarding to compatible string
   and clock data
 - Enable HDMI, TVE, LVDS display support on a bunch of imx5/6 boards
 - Update PCIe to the new binding and enable PCIe support on
   imx6qdl-sabresd board
 - A couple of imx6q-dmo-edmqmx6 updates from Lucas Stach, adding pfuze
   irq gpio and SPI flash
 - Enable CODA7541 VPU for i.MX53
 - A series of updates on imx6qdl-phytec boards from Philipp Zabel
 - Small cleanups and fixes on board imx28-duckbill - Michael Heimpold
 - Add stdout-path property to i.MX boards
 - Karo TX25 board updates from Sascha Hauer
 - Enable pwm and sdhc devices for board vf610-twr

* tag 'imx-dt-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (105 commits)
  ARM: dts: imx35-pdk: Fix memory region description
  ARM: dts: imx51-eukrea-mbimxsd51-baseboard: Add CAN support
  ARM: dts: imx6: add new board RIoTboard
  ARM: dts: imx6: i2c4 cleanup
  ARM: dts: imx6: edmqmx6: add vcc and vio power supplies to stmpe
  ARM: dts: Karo TX25: use hardware ecc
  ARM: dts: Karo TX25: Add phy reset gpio and supply for FEC
  ARM: dts: Karo TX25: Add pinctrl nodes
  ARM: dts: i.MX25: Add IRAM node
  ARM: dts: i.MX25: Add mmc aliases
  ARM: dts: i.MX51 babbage: Fix FEC pad ctrl settings
  ARM: dts: imx6qdl-sabresd: Add USDHC4 support
  ARM: imx: add HDMI support for SolidRun HummingBoard and Cubox-i
  ARM: dts: imx6: edmqmx6: add SPI bus and flash
  ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio
  ARM: dts: imx6q-udoo: Add HDMI support
  ARM: dts: Add stdout-path property to i.MX boards
  ARM: dts: imx: Fix LVDS mapping for Ventana GW52xx
  ARM: dts: imx: add LVDS backlight for Ventana
  ARM: dts: imx6qdl-sabresd: remove power-on gpio from pcie
  ...
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents a59a5911 c6f0b878
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 3257 additions and 538 deletions
Documentation/devicetree/bindings/vendor-prefixes.txt
View file @ 072a4fd2
......@@ -125,6 +125,7 @@ stericsson ST-Ericsson
synology Synology, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility
toradex Toradex AG
toshiba Toshiba Corporation
toumaz Toumaz
usi Universal Scientifc Industrial Co., Ltd.
......
arch/arm/boot/dts/Makefile
View file @ 072a4fd2
......@@ -157,10 +157,12 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx27-phytec-phycard-s-rdk.dtb \
imx31-bug.dtb \
imx35-eukrea-mbimxsd35-baseboard.dtb \
imx35-pdk.dtb \
imx50-evk.dtb \
imx51-apf51.dtb \
imx51-apf51dev.dtb \
imx51-babbage.dtb \
imx51-digi-connectcore-jsk.dtb \
imx51-eukrea-mbimxsd51-baseboard.dtb \
imx53-ard.dtb \
imx53-m53evk.dtb \
......@@ -179,6 +181,8 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6dl-gw54xx.dtb \
imx6dl-hummingboard.dtb \
imx6dl-nitrogen6x.dtb \
imx6dl-phytec-pbab01.dtb \
imx6dl-riotboard.dtb \
imx6dl-sabreauto.dtb \
imx6dl-sabrelite.dtb \
imx6dl-sabresd.dtb \
......@@ -203,6 +207,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
imx6sl-evk.dtb \
vf610-colibri.dtb \
vf610-cosmic.dtb \
vf610-twr.dtb
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
......
arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
View file @ 072a4fd2
......@@ -172,3 +172,16 @@ &uart2 {
fsl,uart-has-rtscts;
status = "okay";
};
&usbhost1 {
phy_type = "serial";
dr_mode = "host";
status = "okay";
};
&usbotg {
phy_type = "utmi";
dr_mode = "otg";
external-vbus-divider;
status = "okay";
};
arch/arm/boot/dts/imx25-karo-tx25.dts
View file @ 072a4fd2
......@@ -16,21 +16,98 @@ / {
model = "Ka-Ro TX25";
compatible = "karo,imx25-tx25", "fsl,imx25";
chosen {
stdout-path = &uart1;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_fec_phy: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "fec-phy";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 9 0>;
enable-active-high;
};
};
memory {
reg = <0x80000000 0x02000000 0x90000000 0x02000000>;
};
};
&iomuxc {
pinctrl_uart1: uart1grp {
fsl,pins = <
MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
MX25_PAD_UART1_RXD__UART1_RXD 0x80000000
MX25_PAD_UART1_CTS__UART1_CTS 0x80000000
MX25_PAD_UART1_RTS__UART1_RTS 0x80000000
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX25_PAD_D11__GPIO_4_9 0x80000000 /* FEC PHY power on pin */
MX25_PAD_D13__GPIO_4_7 0x80000000 /* FEC reset */
MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
MX25_PAD_FEC_MDIO__FEC_MDIO 0x80000000
MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x80000000
>;
};
pinctrl_nfc: nfcgrp {
fsl,pins = <
MX25_PAD_NF_CE0__NF_CE0 0x80000000
MX25_PAD_NFWE_B__NFWE_B 0x80000000
MX25_PAD_NFRE_B__NFRE_B 0x80000000
MX25_PAD_NFALE__NFALE 0x80000000
MX25_PAD_NFCLE__NFCLE 0x80000000
MX25_PAD_NFWP_B__NFWP_B 0x80000000
MX25_PAD_NFRB__NFRB 0x80000000
MX25_PAD_D7__D7 0x80000000
MX25_PAD_D6__D6 0x80000000
MX25_PAD_D5__D5 0x80000000
MX25_PAD_D4__D4 0x80000000
MX25_PAD_D3__D3 0x80000000
MX25_PAD_D2__D2 0x80000000
MX25_PAD_D1__D1 0x80000000
MX25_PAD_D0__D0 0x80000000
>;
};
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-reset-gpios = <&gpio3 7 0>;
phy-mode = "rmii";
phy-supply = <&reg_fec_phy>;
status = "okay";
};
&nfc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nfc>;
nand-on-flash-bbt;
nand-ecc-mode = "hw";
nand-bus-width = <8>;
status = "okay";
};
arch/arm/boot/dts/imx25-pdk.dts
View file @ 072a4fd2
......@@ -10,6 +10,7 @@
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "imx25.dtsi"
/ {
......@@ -19,18 +20,232 @@ / {
memory {
reg = <0x80000000 0x4000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_fec_3v3: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 3 0>;
enable-active-high;
};
reg_2p5v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
reg_3p3v: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_can_3v3: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 6 0>;
};
};
sound {
compatible = "fsl,imx25-pdk-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx25-pdk-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
};
&uart1 {
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1>;
xceiver-supply = <&reg_can_3v3>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio2 1 0>;
wp-gpios = <&gpio2 0 0>;
status = "okay";
};
&fec {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-supply = <&reg_fec_3v3>;
phy-reset-gpios = <&gpio4 8 0>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 129>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
};
};
&iomuxc {
imx25-pdk {
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX25_PAD_RW__AUD4_TXFS 0xe0
MX25_PAD_OE__AUD4_TXC 0xe0
MX25_PAD_EB0__AUD4_TXD 0xe0
MX25_PAD_EB1__AUD4_RXD 0xe0
>;
};
pinctrl_can1: can1grp {
fsl,pins = <
MX25_PAD_GPIO_A__CAN1_TX 0x0
MX25_PAD_GPIO_B__CAN1_RX 0x0
MX25_PAD_D14__GPIO_4_6 0x80000000
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX25_PAD_SD1_CMD__SD1_CMD 0x80000000
MX25_PAD_SD1_CLK__SD1_CLK 0x80000000
MX25_PAD_SD1_DATA0__SD1_DATA0 0x80000000
MX25_PAD_SD1_DATA1__SD1_DATA1 0x80000000
MX25_PAD_SD1_DATA2__SD1_DATA2 0x80000000
MX25_PAD_SD1_DATA3__SD1_DATA3 0x80000000
MX25_PAD_A14__GPIO_2_0 0x80000000
MX25_PAD_A15__GPIO_2_1 0x80000000
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0
MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0
MX25_PAD_A17__GPIO_2_3 0x80000000
MX25_PAD_D12__GPIO_4_8 0x80000000
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000
MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000
>;
};
pinctrl_kpp: kppgrp {
fsl,pins = <
MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000
MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000
MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000
MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000
MX25_PAD_KPP_COL0__KPP_COL0 0x80000000
MX25_PAD_KPP_COL1__KPP_COL1 0x80000000
MX25_PAD_KPP_COL2__KPP_COL2 0x80000000
MX25_PAD_KPP_COL3__KPP_COL3 0x80000000
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX25_PAD_UART1_RTS__UART1_RTS 0xe0
MX25_PAD_UART1_CTS__UART1_CTS 0xe0
MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
MX25_PAD_UART1_RXD__UART1_RXD 0xc0
>;
};
};
};
&nfc {
nand-on-flash-bbt;
status = "okay";
};
&kpp {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_kpp>;
linux,keymap = <
MATRIX_KEY(0x0, 0x0, KEY_UP)
MATRIX_KEY(0x0, 0x1, KEY_DOWN)
MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN)
MATRIX_KEY(0x0, 0x3, KEY_HOME)
MATRIX_KEY(0x1, 0x0, KEY_RIGHT)
MATRIX_KEY(0x1, 0x1, KEY_LEFT)
MATRIX_KEY(0x1, 0x2, KEY_ENTER)
MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP)
MATRIX_KEY(0x2, 0x0, KEY_F6)
MATRIX_KEY(0x2, 0x1, KEY_F8)
MATRIX_KEY(0x2, 0x2, KEY_F9)
MATRIX_KEY(0x2, 0x3, KEY_F10)
MATRIX_KEY(0x3, 0x0, KEY_F1)
MATRIX_KEY(0x3, 0x1, KEY_F2)
MATRIX_KEY(0x3, 0x2, KEY_F3)
MATRIX_KEY(0x3, 0x2, KEY_POWER)
>;
status = "okay";
};
&ssi1 {
codec-handle = <&codec>;
fsl,mode = "i2s-slave";
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
fsl,uart-has-rtscts;
status = "okay";
};
&usbhost1 {
phy_type = "serial";
dr_mode = "host";
status = "okay";
};
arch/arm/boot/dts/imx25.dtsi
View file @ 072a4fd2
......@@ -14,6 +14,7 @@
/ {
aliases {
ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
......@@ -21,6 +22,8 @@ aliases {
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
mmc0 = &esdhc1;
mmc1 = &esdhc2;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
......@@ -165,9 +168,10 @@ spi1: cspi@43fa4000 {
status = "disabled";
};
kpp@43fa8000 {
kpp: kpp@43fa8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx25-kpp", "fsl,imx21-kpp";
reg = <0x43fa8000 0x4000>;
clocks = <&clks 102>;
clock-names = "";
......@@ -482,23 +486,13 @@ iim: iim@53ff0000 {
clocks = <&clks 99>;
};
usbphy1: usbphy@1 {
compatible = "nop-usbphy";
status = "disabled";
};
usbphy2: usbphy@2 {
compatible = "nop-usbphy";
status = "disabled";
};
usbotg: usb@53ff4000 {
compatible = "fsl,imx25-usb", "fsl,imx27-usb";
reg = <0x53ff4000 0x0200>;
interrupts = <37>;
clocks = <&clks 9>, <&clks 70>, <&clks 8>;
clock-names = "ipg", "ahb", "per";
clocks = <&clks 70>;
fsl,usbmisc = <&usbmisc 0>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
};
......@@ -506,9 +500,9 @@ usbhost1: usb@53ff4400 {
compatible = "fsl,imx25-usb", "fsl,imx27-usb";
reg = <0x53ff4400 0x0200>;
interrupts = <35>;
clocks = <&clks 9>, <&clks 70>, <&clks 8>;
clock-names = "ipg", "ahb", "per";
clocks = <&clks 70>;
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
status = "disabled";
};
......@@ -518,7 +512,6 @@ usbmisc: usbmisc@53ff4600 {
clocks = <&clks 9>, <&clks 70>, <&clks 8>;
clock-names = "ipg", "ahb", "per";
reg = <0x53ff4600 0x00f>;
status = "disabled";
};
dryice@53ffc000 {
......@@ -530,6 +523,11 @@ dryice@53ffc000 {
};
};
iram: sram@78000000 {
compatible = "mmio-sram";
reg = <0x78000000 0x20000>;
};
emi@80000000 {
compatible = "fsl,emi-bus", "simple-bus";
#address-cells = <1>;
......@@ -550,4 +548,20 @@ nfc: nand@bb000000 {
};
};
};
usbphy {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
usbphy0: usb-phy@0 {
reg = <0>;
compatible = "usb-nop-xceiv";
};
usbphy1: usb-phy@1 {
reg = <1>;
compatible = "usb-nop-xceiv";
};
};
};
arch/arm/boot/dts/imx27-pdk.dts
View file @ 072a4fd2
......@@ -17,15 +17,181 @@ / {
compatible = "fsl,imx27-pdk", "fsl,imx27";
memory {
reg = <0x0 0x0>;
reg = <0xa0000000 0x08000000>;
};
usbphy {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
usbphy0: usbphy@0 {
compatible = "usb-nop-xceiv";
reg = <0>;
clocks = <&clks 0>;
clock-names = "main_clk";
};
};
};
&cspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cspi2>;
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
status = "okay";
pmic: mc13783@0 {
compatible = "fsl,mc13783";
reg = <0>;
spi-cs-high;
spi-max-frequency = <1000000>;
interrupt-parent = <&gpio3>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
regulators {
vgen_reg: vgen {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
vmmc1_reg: vmmc1 {
regulator-min-microvolt = <1600000>;
regulator-max-microvolt = <3000000>;
};
gpo1_reg: gpo1 {
regulator-always-on;
regulator-boot-on;
};
gpo3_reg: gpo3 {
regulator-always-on;
regulator-boot-on;
};
};
};
};
&fec {
phy-mode = "mii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
status = "okay";
};
&kpp {
linux,keymap = <
MATRIX_KEY(0, 0, KEY_UP)
MATRIX_KEY(0, 1, KEY_DOWN)
MATRIX_KEY(1, 0, KEY_RIGHT)
MATRIX_KEY(1, 1, KEY_LEFT)
MATRIX_KEY(1, 2, KEY_ENTER)
MATRIX_KEY(2, 0, KEY_F6)
MATRIX_KEY(2, 1, KEY_F8)
MATRIX_KEY(2, 2, KEY_F9)
MATRIX_KEY(2, 3, KEY_F10)
>;
status = "okay";
};
&nfc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
status = "okay";
};
&uart1 {
fsl,uart-has-rtscts;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&fec {
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
dr_mode = "otg";
fsl,usbphy = <&usbphy0>;
phy_type = "ulpi";
status = "okay";
};
&iomuxc {
imx27-pdk {
pinctrl_cspi2: cspi2grp {
fsl,pins = <
MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
MX27_PAD_CSPI2_SS0__GPIO4_21 0x0 /* SPI2 CS0 */
MX27_PAD_TOUT__GPIO3_14 0x0 /* PMIC IRQ */
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX27_PAD_SD3_CMD__FEC_TXD0 0x0
MX27_PAD_SD3_CLK__FEC_TXD1 0x0
MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
MX27_PAD_ATA_DATA7__FEC_MDC 0x0
MX27_PAD_ATA_DATA8__FEC_CRS 0x0
MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
MX27_PAD_ATA_DATA13__FEC_COL 0x0
MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
>;
};
pinctrl_nand: nandgrp {
fsl,pins = <
MX27_PAD_NFRB__NFRB 0x0
MX27_PAD_NFCLE__NFCLE 0x0
MX27_PAD_NFWP_B__NFWP_B 0x0
MX27_PAD_NFCE_B__NFCE_B 0x0
MX27_PAD_NFALE__NFALE 0x0
MX27_PAD_NFRE_B__NFRE_B 0x0
MX27_PAD_NFWE_B__NFWE_B 0x0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX27_PAD_UART1_TXD__UART1_TXD 0x0
MX27_PAD_UART1_RXD__UART1_RXD 0x0
MX27_PAD_UART1_CTS__UART1_CTS 0x0
MX27_PAD_UART1_RTS__UART1_RTS 0x0
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
>;
};
};
};
arch/arm/boot/dts/imx27-phytec-phycard-s-rdk.dts
View file @ 072a4fd2
......@@ -15,6 +15,10 @@ / {
model = "Phytec pca100 rapid development kit";
compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
chosen {
stdout-path = &uart1;
};
display: display {
model = "Primeview-PD050VL1";
native-mode = <&timing0>;
......
arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
View file @ 072a4fd2
......@@ -12,14 +12,79 @@
/ {
model = "Phytec pcm970";
compatible = "phytec,imx27-pcm970", "phytec,imx27-pcm038", "fsl,imx27";
chosen {
stdout-path = &uart1;
};
display0: LQ035Q7 {
model = "Sharp-LQ035Q7";
native-mode = <&timing0>;
bits-per-pixel = <16>;
fsl,pcr = <0xf00080c0>;
display-timings {
timing0: 240x320 {
clock-frequency = <5500000>;
hactive = <240>;
vactive = <320>;
hback-porch = <5>;
hsync-len = <7>;
hfront-porch = <16>;
vback-porch = <7>;
vsync-len = <1>;
vfront-porch = <9>;
pixelclk-active = <1>;
hsync-active = <1>;
vsync-active = <1>;
de-active = <0>;
};
};
};
regulators {
regulator@2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_csien>;
reg = <2>;
regulator-name = "CSI_EN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
regulator-always-on;
};
};
usbphy {
usbphy2: usbphy@2 {
compatible = "usb-nop-xceiv";
reg = <2>;
vcc-supply = <&reg_5v0>;
clocks = <&clks 0>;
clock-names = "main_clk";
};
};
};
&cspi1 {
pinctrl-0 = <&pinctrl_cspi1>, <&pinctrl_cspi1cs1>;
fsl,spi-num-chipselects = <2>;
cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
<&gpio4 27 GPIO_ACTIVE_LOW>;
};
&fb {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_imxfb1>;
display = <&display0>;
lcd-supply = <&reg_5v0>;
fsl,dmacr = <0x00020010>;
fsl,lscr1 = <0x00120300>;
fsl,lpccr = <0x00a903ff>;
status = "okay";
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
......@@ -36,6 +101,50 @@ camgpio: pca9536@41 {
&iomuxc {
imx27_phycore_rdk {
pinctrl_csien: csiengrp {
fsl,pins = <
MX27_PAD_USB_OC_B__GPIO2_24 0x0
>;
};
pinctrl_cspi1cs1: cspi1cs1grp {
fsl,pins = <
MX27_PAD_CSPI1_SS1__GPIO4_27 0x0
>;
};
pinctrl_imxfb1: imxfbgrp {
fsl,pins = <
MX27_PAD_LD0__LD0 0x0
MX27_PAD_LD1__LD1 0x0
MX27_PAD_LD2__LD2 0x0
MX27_PAD_LD3__LD3 0x0
MX27_PAD_LD4__LD4 0x0
MX27_PAD_LD5__LD5 0x0
MX27_PAD_LD6__LD6 0x0
MX27_PAD_LD7__LD7 0x0
MX27_PAD_LD8__LD8 0x0
MX27_PAD_LD9__LD9 0x0
MX27_PAD_LD10__LD10 0x0
MX27_PAD_LD11__LD11 0x0
MX27_PAD_LD12__LD12 0x0
MX27_PAD_LD13__LD13 0x0
MX27_PAD_LD14__LD14 0x0
MX27_PAD_LD15__LD15 0x0
MX27_PAD_LD16__LD16 0x0
MX27_PAD_LD17__LD17 0x0
MX27_PAD_CLS__CLS 0x0
MX27_PAD_CONTRAST__CONTRAST 0x0
MX27_PAD_LSCLK__LSCLK 0x0
MX27_PAD_OE_ACD__OE_ACD 0x0
MX27_PAD_PS__PS 0x0
MX27_PAD_REV__REV 0x0
MX27_PAD_SPL_SPR__SPL_SPR 0x0
MX27_PAD_HSYNC__HSYNC 0x0
MX27_PAD_VSYNC__VSYNC 0x0
>;
};
pinctrl_i2c1: i2c1grp {
/* Add pullup to DATA line */
fsl,pins = <
......@@ -193,19 +302,16 @@ &usbh2 {
dr_mode = "host";
phy_type = "ulpi";
vbus-supply = <&reg_5v0>;
fsl,usbphy = <&usbphy2>;
disable-over-current;
status = "okay";
};
&usbphy2 {
vcc-supply = <&reg_5v0>;
};
&weim {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_weim>;
can@d4000000 {
can@4,0 {
compatible = "nxp,sja1000";
reg = <4 0x00000000 0x00000100>;
interrupt-parent = <&gpio5>;
......
arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi
View file @ 072a4fd2
......@@ -41,6 +41,20 @@ reg_5v0: regulator@1 {
regulator-max-microvolt = <5000000>;
};
};
usbphy {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
usbphy0: usbphy@0 {
compatible = "usb-nop-xceiv";
reg = <0>;
vcc-supply = <&sw3_reg>;
clocks = <&clks 0>;
clock-names = "main_clk";
};
};
};
&audmux {
......@@ -66,9 +80,9 @@ &cspi1 {
status = "okay";
pmic: mc13783@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mc13783";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pmic>;
reg = <0>;
spi-cs-high;
spi-max-frequency = <20000000>;
......@@ -166,7 +180,7 @@ pwgt1spi_reg: pwgt1spi {
&fec {
phy-mode = "mii";
phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
phy-reset-gpios = <&gpio3 30 GPIO_ACTIVE_LOW>;
phy-supply = <&reg_3v3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
......@@ -204,7 +218,6 @@ MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0
MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0
MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* SPI1 CS0 */
MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */
>;
};
......@@ -251,6 +264,21 @@ MX27_PAD_NFWE_B__NFWE_B 0x0
>;
};
pinctrl_pmic: pmicgrp {
fsl,pins = <
MX27_PAD_USB_PWR__GPIO2_23 0x0 /* PMIC IRQ */
>;
};
pinctrl_ssi1: ssi1grp {
fsl,pins = <
MX27_PAD_SSI1_FS__SSI1_FS 0x0
MX27_PAD_SSI1_RXDAT__SSI1_RXDAT 0x0
MX27_PAD_SSI1_TXDAT__SSI1_TXDAT 0x0
MX27_PAD_SSI1_CLK__SSI1_CLK 0x0
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
......@@ -279,23 +307,28 @@ &nfc {
status = "okay";
};
&ssi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssi1>;
fsl,mode = "i2s-slave";
status = "okay";
};
&usbotg {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
dr_mode = "otg";
phy_type = "ulpi";
fsl,usbphy = <&usbphy0>;
vbus-supply = <&sw3_reg>;
disable-over-current;
status = "okay";
};
&usbphy0 {
vcc-supply = <&sw3_reg>;
};
&weim {
status = "okay";
nor: nor@c0000000 {
nor: nor@0,0 {
compatible = "cfi-flash";
reg = <0 0x00000000 0x02000000>;
bank-width = <2>;
......@@ -305,7 +338,7 @@ nor: nor@c0000000 {
#size-cells = <1>;
};
sram: sram@c8000000 {
sram: sram@1,0 {
compatible = "mtd-ram";
reg = <1 0x00000000 0x00800000>;
bank-width = <2>;
......
arch/arm/boot/dts/imx27.dtsi
View file @ 072a4fd2
......@@ -11,11 +11,13 @@
#include "skeleton.dtsi"
#include "imx27-pinfunc.h"
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ {
aliases {
ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
......@@ -71,26 +73,6 @@ cpu: cpu@0 {
};
};
usbphy {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
usbphy0: usbphy@0 {
compatible = "usb-nop-xceiv";
reg = <0>;
clocks = <&clks 75>;
clock-names = "main_clk";
};
usbphy2: usbphy@2 {
compatible = "usb-nop-xceiv";
reg = <2>;
clocks = <&clks 75>;
clock-names = "main_clk";
};
};
soc {
#address-cells = <1>;
#size-cells = <1>;
......@@ -464,9 +446,8 @@ usbotg: usb@10024000 {
compatible = "fsl,imx27-usb";
reg = <0x10024000 0x200>;
interrupts = <56>;
clocks = <&clks 15>;
clocks = <&clks 75>;
fsl,usbmisc = <&usbmisc 0>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
};
......@@ -474,7 +455,7 @@ usbh1: usb@10024200 {
compatible = "fsl,imx27-usb";
reg = <0x10024200 0x200>;
interrupts = <54>;
clocks = <&clks 15>;
clocks = <&clks 75>;
fsl,usbmisc = <&usbmisc 1>;
status = "disabled";
};
......@@ -483,9 +464,8 @@ usbh2: usb@10024400 {
compatible = "fsl,imx27-usb";
reg = <0x10024400 0x200>;
interrupts = <55>;
clocks = <&clks 15>;
clocks = <&clks 75>;
fsl,usbmisc = <&usbmisc 2>;
fsl,usbphy = <&usbphy2>;
status = "disabled";
};
......
arch/arm/boot/dts/imx28-duckbill.dts
View file @ 072a4fd2
......@@ -25,9 +25,9 @@ apbh@80000000 {
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
pinctrl-names = "default";
pinctrl-0 = <&mmc0_8bit_pins_a
pinctrl-0 = <&mmc0_4bit_pins_a
&mmc0_cd_cfg &mmc0_sck_cfg>;
bus-width = <8>;
bus-width = <4>;
vmmc-supply = <&reg_3p3v>;
status = "okay";
};
......@@ -39,7 +39,7 @@ pinctrl@80018000 {
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
MX28_PAD_ENET0_RX_CLK__GPIO_4_13 /* PHY Reset */
MX28_PAD_SSP0_DATA7__GPIO_2_7 /* PHY Reset */
>;
fsl,drive-strength = <MXS_DRIVE_4mA>;
fsl,voltage = <MXS_VOLTAGE_HIGH>;
......@@ -82,7 +82,7 @@ mac0: ethernet@800f0000 {
pinctrl-names = "default";
pinctrl-0 = <&mac0_pins_a>;
phy-supply = <&reg_3p3v>;
phy-reset-gpios = <&gpio4 13 0>;
phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
phy-reset-duration = <100>;
status = "okay";
};
......@@ -110,12 +110,12 @@ leds {
status {
label = "duckbill:green:status";
gpios = <&gpio3 5 0>;
gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
};
failure {
label = "duckbill:red:status";
gpios = <&gpio3 4 0>;
gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
};
};
};
arch/arm/boot/dts/imx28.dtsi
View file @ 072a4fd2
......@@ -9,6 +9,7 @@
* http://www.gnu.org/copyleft/gpl.html
*/
#include <dt-bindings/gpio/gpio.h>
#include "skeleton.dtsi"
#include "imx28-pinfunc.h"
......
arch/arm/boot/dts/imx35-eukrea-cpuimx35.dtsi
View file @ 072a4fd2
......@@ -37,6 +37,17 @@ pcf8563@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
tsc2007: tsc2007@48 {
compatible = "ti,tsc2007";
gpios = <&gpio3 2 0>;
interrupt-parent = <&gpio3>;
interrupts = <0x2 0x8>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc2007_1>;
reg = <0x48>;
ti,x-plate-ohms = <180>;
};
};
&iomuxc {
......@@ -70,6 +81,10 @@ MX35_PAD_I2C1_CLK__I2C1_SCL 0x80000000
MX35_PAD_I2C1_DAT__I2C1_SDA 0x80000000
>;
};
pinctrl_tsc2007_1: tsc2007grp-1 {
fsl,pins = <MX35_PAD_ATA_DA2__GPIO3_2 0x80000000>;
};
};
};
......
arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
View file @ 072a4fd2
......@@ -46,6 +46,14 @@ led1 {
linux,default-trigger = "heartbeat";
};
};
sound {
compatible = "eukrea,asoc-tlv320";
eukrea,model = "imx35-eukrea-tlv320aic23";
ssi-controller = <&ssi1>;
fsl,mux-int-port = <1>;
fsl,mux-ext-port = <4>;
};
};
&audmux {
......@@ -124,6 +132,7 @@ MX35_PAD_CTS2__UART2_CTS 0x1c5
};
&ssi1 {
codec-handle = <&tlv320aic23>;
fsl,mode = "i2s-slave";
status = "okay";
};
......@@ -141,3 +150,16 @@ &uart2 {
fsl,uart-has-rtscts;
status = "okay";
};
&usbhost1 {
phy_type = "serial";
dr_mode = "host";
status = "okay";
};
&usbotg {
phy_type = "utmi";
dr_mode = "otg";
external-vbus-divider;
status = "okay";
};
arch/arm/boot/dts/imx35-pdk.dts 0 → 100644
View file @ 072a4fd2
/*
* Copyright 2013 Eukréa Electromatique <denis@eukrea.com>
* Copyright 2014 Freescale Semiconductor, Inc.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx35.dtsi"
/ {
model = "Freescale i.MX35 Product Development Kit";
compatible = "fsl,imx35-pdk", "fsl,imx35";
memory {
reg = <0x80000000 0x8000000>,
<0x90000000 0x8000000>;
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
status = "okay";
};
&iomuxc {
imx35-pdk {
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX35_PAD_SD1_CMD__ESDHC1_CMD 0x80000000
MX35_PAD_SD1_CLK__ESDHC1_CLK 0x80000000
MX35_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000
MX35_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000
MX35_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000
MX35_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX35_PAD_TXD1__UART1_TXD_MUX 0x1c5
MX35_PAD_RXD1__UART1_RXD_MUX 0x1c5
MX35_PAD_CTS1__UART1_CTS 0x1c5
MX35_PAD_RTS1__UART1_RTS 0x1c5
>;
};
};
};
&nfc {
nand-bus-width = <16>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
fsl,uart-has-rtscts;
status = "okay";
};
arch/arm/boot/dts/imx35.dtsi
View file @ 072a4fd2
......@@ -13,6 +13,7 @@
/ {
aliases {
ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
......@@ -295,9 +296,9 @@ usbotg: usb@53ff4000 {
compatible = "fsl,imx35-usb", "fsl,imx27-usb";
reg = <0x53ff4000 0x0200>;
interrupts = <37>;
clocks = <&clks 9>, <&clks 73>, <&clks 28>;
clock-names = "ipg", "ahb", "per";
clocks = <&clks 73>;
fsl,usbmisc = <&usbmisc 0>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
};
......@@ -305,9 +306,9 @@ usbhost1: usb@53ff4400 {
compatible = "fsl,imx35-usb", "fsl,imx27-usb";
reg = <0x53ff4400 0x0200>;
interrupts = <35>;
clocks = <&clks 9>, <&clks 73>, <&clks 28>;
clock-names = "ipg", "ahb", "per";
clocks = <&clks 73>;
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
status = "disabled";
};
......@@ -356,4 +357,20 @@ weim: weim@b8002000 {
};
};
};
usbphy {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
usbphy0: usb-phy@0 {
reg = <0>;
compatible = "usb-nop-xceiv";
};
usbphy1: usb-phy@1 {
reg = <1>;
compatible = "usb-nop-xceiv";
};
};
};
arch/arm/boot/dts/imx50.dtsi
View file @ 072a4fd2
......@@ -17,6 +17,7 @@
/ {
aliases {
ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
......
arch/arm/boot/dts/imx51-babbage.dts
View file @ 072a4fd2
This diff is collapsed.
arch/arm/boot/dts/imx51-digi-connectcore-jsk.dts 0 → 100644
View file @ 072a4fd2
/*
* Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include "imx51-digi-connectcore-som.dtsi"
/ {
model = "Digi ConnectCore CC(W)-MX51 JSK";
compatible = "digi,connectcore-ccxmx51-jsk",
"digi,connectcore-ccxmx51-som", "fsl,imx51";
chosen {
linux,stdout-path = &uart1;
};
};
&owire {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_owire>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "okay";
};
&usbotg {
dr_mode = "otg";
status = "okay";
};
&usbh1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
dr_mode = "host";
phy_type = "ulpi";
disable-over-current;
status = "okay";
};
&iomuxc {
imx51-digi-connectcore-jsk {
pinctrl_owire: owiregrp {
fsl,pins = <
MX51_PAD_OWIRE_LINE__OWIRE_LINE 0x40000000
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX51_PAD_UART3_RXD__UART3_RXD 0x1c5
MX51_PAD_UART3_TXD__UART3_TXD 0x1c5
>;
};
pinctrl_usbh1: usbh1grp {
fsl,pins = <
MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5
MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5
MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5
MX51_PAD_USBH1_STP__USBH1_STP 0x1e5
>;
};
};
};
arch/arm/boot/dts/imx51-digi-connectcore-som.dtsi 0 → 100644
View file @ 072a4fd2
/*
* Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx51.dtsi"
/ {
model = "Digi ConnectCore CC(W)-MX51";
compatible = "digi,connectcore-ccxmx51-som", "fsl,imx51";
memory {
reg = <0x90000000 0x08000000>;
};
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
status = "okay";
pmic: mc13892@0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mc13892>;
compatible = "fsl,mc13892";
spi-max-frequency = <16000000>;
spi-cs-high;
reg = <0>;
interrupt-parent = <&gpio1>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
fsl,mc13xxx-uses-rtc;
regulators {
sw1_reg: sw1 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
};
sw2_reg: sw2 {
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
regulator-boot-on;
regulator-always-on;
};
sw3_reg: sw3 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-boot-on;
regulator-always-on;
};
swbst_reg: swbst { };
viohi_reg: viohi {
regulator-always-on;
};
vpll_reg: vpll {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdig_reg: vdig {
regulator-min-microvolt = <1250000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
};
vsd_reg: vsd {
regulator-min-microvolt = <3150000>;
regulator-max-microvolt = <3150000>;
regulator-always-on;
};
vusb2_reg: vusb2 {
regulator-min-microvolt = <2600000>;
regulator-max-microvolt = <2600000>;
regulator-always-on;
};
vvideo_reg: vvideo {
regulator-min-microvolt = <2775000>;
regulator-max-microvolt = <2775000>;
regulator-always-on;
};
vaudio_reg: vaudio {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
vcam_reg: vcam {
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <2750000>;
regulator-always-on;
};
vgen1_reg: vgen1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
vgen2_reg: vgen2 {
regulator-min-microvolt = <3150000>;
regulator-max-microvolt = <3150000>;
regulator-always-on;
};
vgen3_reg: vgen3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vusb_reg: vusb {
regulator-always-on;
};
gpo1_reg: gpo1 { };
gpo2_reg: gpo2 { };
gpo3_reg: gpo3 { };
gpo4_reg: gpo4 { };
pwgt2spi_reg: pwgt2spi {
regulator-always-on;
};
vcoincell_reg: vcoincell {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
};
};
};
&esdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc2>;
cap-sdio-irq;
enable-sdio-wakeup;
keep-power-in-suspend;
max-frequency = <50000000>;
no-1-8-v;
non-removable;
vmmc-supply = <&gpo4_reg>;
status = "okay";
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-mode = "mii";
phy-supply = <&gpo3_reg>;
/* Pins shared with LCD2, keep status disabled */
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <400000>;
status = "okay";
mma7455l@1d {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mma7455l>;
compatible = "fsl,mma7455l";
reg = <0x1d>;
interrupt-parent = <&gpio1>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>, <6 IRQ_TYPE_LEVEL_HIGH>;
};
};
&nfc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nfc>;
nand-bus-width = <8>;
nand-ecc-mode = "hw";
nand-on-flash-bbt;
status = "okay";
};
&usbotg {
phy_type = "utmi_wide";
disable-over-current;
/* Device role is not known, keep status disabled */
};
&weim {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_weim>;
status = "okay";
lan9221: lan9221@5,0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lan9221>;
compatible = "smsc,lan9221", "smsc,lan9115";
reg = <5 0x00000000 0x1000>;
fsl,weim-cs-timing = <
0x00420081 0x00000000
0x32260000 0x00000000
0x72080f00 0x00000000
>;
clocks = <&clks IMX5_CLK_DUMMY>;
interrupt-parent = <&gpio1>;
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
phy-mode = "mii";
reg-io-width = <2>;
smsc,irq-push-pull;
vdd33a-supply = <&gpo2_reg>;
vddvario-supply = <&gpo2_reg>;
};
};
&iomuxc {
imx51-digi-connectcore-som {
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */
>;
};
pinctrl_esdhc2: esdhc2grp {
fsl,pins = <
MX51_PAD_SD2_CMD__SD2_CMD 0x400020d5
MX51_PAD_SD2_CLK__SD2_CLK 0x20d5
MX51_PAD_SD2_DATA0__SD2_DATA0 0x20d5
MX51_PAD_SD2_DATA1__SD2_DATA1 0x20d5
MX51_PAD_SD2_DATA2__SD2_DATA2 0x20d5
MX51_PAD_SD2_DATA3__SD2_DATA3 0x20d5
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX51_PAD_DI_GP3__FEC_TX_ER 0x80000000
MX51_PAD_DI2_PIN4__FEC_CRS 0x80000000
MX51_PAD_DI2_PIN2__FEC_MDC 0x80000000
MX51_PAD_DI2_PIN3__FEC_MDIO 0x80000000
MX51_PAD_DI2_DISP_CLK__FEC_RDATA1 0x80000000
MX51_PAD_DI_GP4__FEC_RDATA2 0x80000000
MX51_PAD_DISP2_DAT0__FEC_RDATA3 0x80000000
MX51_PAD_DISP2_DAT1__FEC_RX_ER 0x80000000
MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x80000000
MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x80000000
MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x80000000
MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x80000000
MX51_PAD_DISP2_DAT10__FEC_COL 0x80000000
MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x80000000
MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x80000000
MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x80000000
MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x80000000
MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x80000000
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX51_PAD_GPIO1_2__I2C2_SCL 0x400001ed
MX51_PAD_GPIO1_3__I2C2_SDA 0x400001ed
>;
};
pinctrl_nfc: nfcgrp {
fsl,pins = <
MX51_PAD_NANDF_D0__NANDF_D0 0x80000000
MX51_PAD_NANDF_D1__NANDF_D1 0x80000000
MX51_PAD_NANDF_D2__NANDF_D2 0x80000000
MX51_PAD_NANDF_D3__NANDF_D3 0x80000000
MX51_PAD_NANDF_D4__NANDF_D4 0x80000000
MX51_PAD_NANDF_D5__NANDF_D5 0x80000000
MX51_PAD_NANDF_D6__NANDF_D6 0x80000000
MX51_PAD_NANDF_D7__NANDF_D7 0x80000000
MX51_PAD_NANDF_ALE__NANDF_ALE 0x80000000
MX51_PAD_NANDF_CLE__NANDF_CLE 0x80000000
MX51_PAD_NANDF_RE_B__NANDF_RE_B 0x80000000
MX51_PAD_NANDF_WE_B__NANDF_WE_B 0x80000000
MX51_PAD_NANDF_WP_B__NANDF_WP_B 0x80000000
MX51_PAD_NANDF_CS0__NANDF_CS0 0x80000000
MX51_PAD_NANDF_RB0__NANDF_RB0 0x80000000
>;
};
pinctrl_lan9221: lan9221grp {
fsl,pins = <
MX51_PAD_GPIO1_9__GPIO1_9 0xe5 /* IRQ */
>;
};
pinctrl_mc13892: mc13892grp {
fsl,pins = <
MX51_PAD_GPIO1_5__GPIO1_5 0xe5 /* IRQ */
>;
};
pinctrl_mma7455l: mma7455lgrp {
fsl,pins = <
MX51_PAD_GPIO1_7__GPIO1_7 0xe5 /* IRQ1 */
MX51_PAD_GPIO1_6__GPIO1_6 0xe5 /* IRQ2 */
>;
};
pinctrl_weim: weimgrp {
fsl,pins = <
MX51_PAD_EIM_DA0__EIM_DA0 0x80000000
MX51_PAD_EIM_DA1__EIM_DA1 0x80000000
MX51_PAD_EIM_DA2__EIM_DA2 0x80000000
MX51_PAD_EIM_DA3__EIM_DA3 0x80000000
MX51_PAD_EIM_DA4__EIM_DA4 0x80000000
MX51_PAD_EIM_DA5__EIM_DA5 0x80000000
MX51_PAD_EIM_DA6__EIM_DA6 0x80000000
MX51_PAD_EIM_DA7__EIM_DA7 0x80000000
MX51_PAD_EIM_DA8__EIM_DA8 0x80000000
MX51_PAD_EIM_DA9__EIM_DA9 0x80000000
MX51_PAD_EIM_DA10__EIM_DA10 0x80000000
MX51_PAD_EIM_DA11__EIM_DA11 0x80000000
MX51_PAD_EIM_DA12__EIM_DA12 0x80000000
MX51_PAD_EIM_DA13__EIM_DA13 0x80000000
MX51_PAD_EIM_DA14__EIM_DA14 0x80000000
MX51_PAD_EIM_DA15__EIM_DA15 0x80000000
MX51_PAD_EIM_A16__EIM_A16 0x80000000
MX51_PAD_EIM_A17__EIM_A17 0x80000000
MX51_PAD_EIM_A18__EIM_A18 0x80000000
MX51_PAD_EIM_A19__EIM_A19 0x80000000
MX51_PAD_EIM_A20__EIM_A20 0x80000000
MX51_PAD_EIM_A21__EIM_A21 0x80000000
MX51_PAD_EIM_A22__EIM_A22 0x80000000
MX51_PAD_EIM_A23__EIM_A23 0x80000000
MX51_PAD_EIM_A24__EIM_A24 0x80000000
MX51_PAD_EIM_A25__EIM_A25 0x80000000
MX51_PAD_EIM_A26__EIM_A26 0x80000000
MX51_PAD_EIM_A27__EIM_A27 0x80000000
MX51_PAD_EIM_D16__EIM_D16 0x80000000
MX51_PAD_EIM_D17__EIM_D17 0x80000000
MX51_PAD_EIM_D18__EIM_D18 0x80000000
MX51_PAD_EIM_D19__EIM_D19 0x80000000
MX51_PAD_EIM_D20__EIM_D20 0x80000000
MX51_PAD_EIM_D21__EIM_D21 0x80000000
MX51_PAD_EIM_D22__EIM_D22 0x80000000
MX51_PAD_EIM_D23__EIM_D23 0x80000000
MX51_PAD_EIM_D24__EIM_D24 0x80000000
MX51_PAD_EIM_D25__EIM_D25 0x80000000
MX51_PAD_EIM_D26__EIM_D26 0x80000000
MX51_PAD_EIM_D27__EIM_D27 0x80000000
MX51_PAD_EIM_D28__EIM_D28 0x80000000
MX51_PAD_EIM_D29__EIM_D29 0x80000000
MX51_PAD_EIM_D30__EIM_D30 0x80000000
MX51_PAD_EIM_D31__EIM_D31 0x80000000
MX51_PAD_EIM_OE__EIM_OE 0x80000000
MX51_PAD_EIM_DTACK__EIM_DTACK 0x80000000
MX51_PAD_EIM_LBA__EIM_LBA 0x80000000
MX51_PAD_EIM_CS5__EIM_CS5 0x80000000 /* CS5 */
>;
};
};
};
arch/arm/boot/dts/imx51-eukrea-cpuimx51.dtsi
View file @ 072a4fd2
......@@ -42,6 +42,17 @@ pcf8563@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
tsc2007: tsc2007@49 {
compatible = "ti,tsc2007";
gpios = <&gpio4 0 1>;
interrupt-parent = <&gpio4>;
interrupts = <0x0 0x8>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc2007_1>;
reg = <0x49>;
ti,x-plate-ohms = <180>;
};
};
&iomuxc {
......
arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts
View file @ 072a4fd2
......@@ -24,6 +24,14 @@ / {
model = "Eukrea CPUIMX51";
compatible = "eukrea,mbimxsd51","eukrea,cpuimx51", "fsl,imx51";
clocks {
clk24M: can_clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
};
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
......@@ -50,6 +58,23 @@ led1 {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_can: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "CAN_RST";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
startup-delay-us = <20000>;
enable-active-high;
};
};
sound {
compatible = "eukrea,asoc-tlv320";
eukrea,model = "imx51-eukrea-tlv320aic23";
......@@ -57,6 +82,20 @@ sound {
fsl,mux-int-port = <2>;
fsl,mux-ext-port = <3>;
};
usbphy {
#address-cells = <1>;
#size-cells = <0>;
compatible = "simple-bus";
usbh1phy: usbh1phy@0 {
compatible = "usb-nop-xceiv";
reg = <0>;
clocks = <&clks IMX5_CLK_USB_PHY_GATE>;
clock-names = "main_clk";
clock-frequency = <19200000>;
};
};
};
&audmux {
......@@ -72,6 +111,26 @@ &esdhc1 {
status = "okay";
};
&ecspi1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi1>;
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
status = "okay";
can0: can@0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can>;
compatible = "microchip,mcp2515";
reg = <0>;
clocks = <&clk24M>;
spi-max-frequency = <10000000>;
interrupt-parent = <&gpio1>;
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&reg_can>;
};
};
&i2c1 {
tlv320aic23: codec@1a {
compatible = "ti,tlv320aic23";
......@@ -90,6 +149,23 @@ MX51_PAD_AUD3_BB_FS__AUD3_TXFS 0x80000000
>;
};
pinctrl_can: cangrp {
fsl,pins = <
MX51_PAD_CSI2_PIXCLK__GPIO4_15 0x80000000 /* nReset */
MX51_PAD_GPIO1_1__GPIO1_1 0x80000000 /* IRQ */
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
MX51_PAD_CSPI1_SS0__GPIO4_24 0x80000000 /* CS0 */
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
......@@ -151,6 +227,29 @@ pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
MX51_PAD_CSI1_D9__GPIO3_13 0x1f5
>;
};
pinctrl_usbh1: usbh1grp {
fsl,pins = <
MX51_PAD_USBH1_CLK__USBH1_CLK 0x1e5
MX51_PAD_USBH1_DIR__USBH1_DIR 0x1e5
MX51_PAD_USBH1_NXT__USBH1_NXT 0x1e5
MX51_PAD_USBH1_DATA0__USBH1_DATA0 0x1e5
MX51_PAD_USBH1_DATA1__USBH1_DATA1 0x1e5
MX51_PAD_USBH1_DATA2__USBH1_DATA2 0x1e5
MX51_PAD_USBH1_DATA3__USBH1_DATA3 0x1e5
MX51_PAD_USBH1_DATA4__USBH1_DATA4 0x1e5
MX51_PAD_USBH1_DATA5__USBH1_DATA5 0x1e5
MX51_PAD_USBH1_DATA6__USBH1_DATA6 0x1e5
MX51_PAD_USBH1_DATA7__USBH1_DATA7 0x1e5
MX51_PAD_USBH1_STP__USBH1_STP 0x1e5
>;
};
pinctrl_usbh1_vbus: usbh1-vbusgrp {
fsl,pins = <
MX51_PAD_EIM_CS3__GPIO2_28 0x1f5
>;
};
};
};
......@@ -173,3 +272,24 @@ &uart3 {
fsl,uart-has-rtscts;
status = "okay";
};
&usbh1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
fsl,usbphy = <&usbh1phy>;
dr_mode = "host";
phy_type = "ulpi";
status = "okay";
};
&usbotg {
dr_mode = "otg";
phy_type = "utmi_wide";
status = "okay";
};
&usbphy0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_vbus>;
reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
};
arch/arm/boot/dts/imx51.dtsi
View file @ 072a4fd2
......@@ -19,6 +19,7 @@
/ {
aliases {
ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
......@@ -537,6 +538,8 @@ weim: weim@83fda000 {
};
nfc: nand@83fdb000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,imx51-nand";
reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
interrupts = <8>;
......
arch/arm/boot/dts/imx53-mba53.dts
View file @ 072a4fd2
......@@ -17,6 +17,10 @@ / {
model = "TQ MBa53 starter kit";
compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
chosen {
stdout-path = &uart2;
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 50000>;
......
arch/arm/boot/dts/imx53-qsb-common.dtsi
View file @ 072a4fd2
......@@ -13,6 +13,10 @@
#include "imx53.dtsi"
/ {
chosen {
stdout-path = &uart1;
};
memory {
reg = <0x70000000 0x20000000>,
<0xb0000000 0x20000000>;
......@@ -272,6 +276,14 @@ MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23 0x5
>;
};
pinctrl_vga_sync: vgasync-grp {
fsl,pins = <
/* VGA_HSYNC, VSYNC with max drive strength */
MX53_PAD_EIM_OE__IPU_DI1_PIN7 0xe6
MX53_PAD_EIM_RW__IPU_DI1_PIN8 0xe6
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX53_PAD_CSI0_DAT10__UART1_TXD_MUX 0x1e4
......@@ -281,6 +293,15 @@ MX53_PAD_CSI0_DAT11__UART1_RXD_MUX 0x1e4
};
};
&tve {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_vga_sync>;
fsl,tve-mode = "vga";
fsl,hsync-pin = <4>;
fsl,vsync-pin = <6>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
......
arch/arm/boot/dts/imx53.dtsi
View file @ 072a4fd2
......@@ -18,6 +18,7 @@
/ {
aliases {
ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
......@@ -726,8 +727,8 @@ vpu: vpu@63ff4000 {
clocks = <&clks IMX5_CLK_VPU_GATE>,
<&clks IMX5_CLK_VPU_GATE>;
clock-names = "per", "ahb";
resets = <&src 1>;
iram = <&ocram>;
status = "disabled";
};
};
......
arch/arm/boot/dts/imx6dl-hummingboard.dts
View file @ 072a4fd2
......@@ -11,6 +11,10 @@ / {
model = "SolidRun HummingBoard DL/Solo";
compatible = "solidrun,hummingboard", "fsl,imx6dl";
chosen {
stdout-path = &uart1;
};
ir_recv: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio1 2 1>;
......@@ -67,6 +71,13 @@ &can1 {
status = "okay";
};
&hdmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_hdmi>;
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_i2c1>;
......@@ -82,6 +93,13 @@ rtc: pcf8523@68 {
*/
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hummingboard_i2c2>;
status = "okay";
};
&iomuxc {
hummingboard {
pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 {
......@@ -97,6 +115,12 @@ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
>;
};
pinctrl_hummingboard_hdmi: hummingboard-hdmi {
fsl,pins = <
MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
>;
};
pinctrl_hummingboard_i2c1: hummingboard-i2c1 {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
......@@ -104,6 +128,13 @@ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_hummingboard_i2c2: hummingboard-i2c2 {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_hummingboard_spdif: hummingboard-spdif {
fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
};
......
arch/arm/boot/dts/imx6dl-phytec-pbab01.dts 0 → 100644
View file @ 072a4fd2
/*
* Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;
#include "imx6dl-phytec-pfla02.dtsi"
#include "imx6qdl-phytec-pbab01.dtsi"
/ {
model = "Phytec phyFLEX-i.MX6 DualLite/Solo Carrier-Board";
compatible = "phytec,imx6dl-pbab01", "phytec,imx6dl-pfla02", "fsl,imx6dl";
};
arch/arm/boot/dts/imx6dl-phytec-pfla02.dtsi 0 → 100644
View file @ 072a4fd2
/*
* Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include "imx6dl.dtsi"
#include "imx6qdl-phytec-pfla02.dtsi"
/ {
model = "Phytec phyFLEX-i.MX6 DualLite/Solo";
compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl";
memory {
reg = <0x10000000 0x20000000>;
};
};
arch/arm/boot/dts/imx6dl-riotboard.dts 0 → 100644
View file @ 072a4fd2
This diff is collapsed.
arch/arm/boot/dts/imx6dl.dtsi
View file @ 072a4fd2
......@@ -84,9 +84,10 @@ aips2: aips-bus@02100000 {
i2c4: i2c@021f8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx1-i2c";
compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
reg = <0x021f8000 0x4000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 116>;
status = "disabled";
};
};
......
arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
View file @ 072a4fd2
......@@ -18,6 +18,10 @@ / {
model = "Data Modul eDM-QMX6 Board";
compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
chosen {
stdout-path = &uart2;
};
aliases {
gpio7 = &stmpe_gpio1;
gpio8 = &stmpe_gpio2;
......@@ -91,6 +95,20 @@ led-red {
};
};
&ecspi5 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi5>;
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio1 12 0>;
status = "okay";
flash: m25p80@0 {
compatible = "m25p80";
spi-max-frequency = <40000000>;
reg = <0>;
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
......@@ -105,7 +123,8 @@ &i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2
&pinctrl_stmpe1
&pinctrl_stmpe2>;
&pinctrl_stmpe2
&pinctrl_pfuze>;
status = "okay";
pmic: pfuze100@08 {
......@@ -216,6 +235,8 @@ stmpe1: stmpe1601@40 {
reg = <0x40>;
interrupts = <30 0>;
interrupt-parent = <&gpio3>;
vcc-supply = <&sw2_reg>;
vio-supply = <&sw2_reg>;
stmpe_gpio1: stmpe_gpio {
#gpio-cells = <2>;
......@@ -228,6 +249,8 @@ stmpe2: stmpe1601@44 {
reg = <0x44>;
interrupts = <2 0>;
interrupt-parent = <&gpio5>;
vcc-supply = <&sw2_reg>;
vio-supply = <&sw2_reg>;
stmpe_gpio2: stmpe_gpio {
#gpio-cells = <2>;
......@@ -263,6 +286,15 @@ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
>;
};
pinctrl_ecspi5: ecspi5rp-1 {
fsl,pins = <
MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000
MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
......@@ -291,6 +323,12 @@ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_pfuze: pfuze100grp1 {
fsl,pins = <
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000
>;
};
pinctrl_stmpe1: stmpe1grp {
fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
};
......
arch/arm/boot/dts/imx6q-gk802.dts
View file @ 072a4fd2
......@@ -14,7 +14,7 @@ / {
compatible = "zealz,imx6q-gk802", "fsl,imx6q";
chosen {
linux,stdout-path = &uart4;
stdout-path = &uart4;
};
memory {
......@@ -48,6 +48,11 @@ recovery-button {
};
};
&hdmi {
ddc-i2c-bus = <&i2c3>;
status = "okay";
};
/* Internal I2C */
&i2c2 {
pinctrl-names = "default";
......
arch/arm/boot/dts/imx6q-gw5400-a.dts
View file @ 072a4fd2
......@@ -157,6 +157,11 @@ &fec {
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c3>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
......
arch/arm/boot/dts/imx6q-phytec-pbab01.dts
View file @ 072a4fd2
......@@ -11,40 +11,17 @@
/dts-v1/;
#include "imx6q-phytec-pfla02.dtsi"
#include "imx6qdl-phytec-pbab01.dtsi"
/ {
model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board";
compatible = "phytec,imx6q-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q";
};
&fec {
status = "okay";
};
&gpmi {
status = "okay";
chosen {
stdout-path = &uart4;
};
};
&sata {
status = "okay";
};
&uart4 {
status = "okay";
};
&usbh1 {
status = "okay";
};
&usbotg {
status = "okay";
};
&usdhc2 {
status = "okay";
};
&usdhc3 {
status = "okay";
status = "okay";
};
arch/arm/boot/dts/imx6q-phytec-pfla02.dtsi
View file @ 072a4fd2
......@@ -10,316 +10,13 @@
*/
#include "imx6q.dtsi"
#include "imx6qdl-phytec-pfla02.dtsi"
/ {
model = "Phytec phyFLEX-i.MX6 Ouad";
model = "Phytec phyFLEX-i.MX6 Quad";
compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
memory {
reg = <0x10000000 0x80000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb_otg_vbus: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 15 0>;
};
reg_usb_h1_vbus: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 0 0>;
};
};
};
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 24 0>;
flash@0 {
compatible = "m25p80";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
};
pmic@58 {
compatible = "dialog,da9063";
reg = <0x58>;
interrupt-parent = <&gpio4>;
interrupts = <17 0x8>; /* active-low GPIO4_17 */
regulators {
vddcore_reg: bcore1 {
regulator-min-microvolt = <730000>;
regulator-max-microvolt = <1380000>;
regulator-always-on;
};
vddsoc_reg: bcore2 {
regulator-min-microvolt = <730000>;
regulator-max-microvolt = <1380000>;
regulator-always-on;
};
vdd_ddr3_reg: bpro {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
vdd_3v3_reg: bperi {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_buckmem_reg: bmem {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_eth_reg: bio {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
vdd_eth_io_reg: ldo4 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
vdd_mx6_snvs_reg: ldo5 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
vdd_3v3_pmic_io_reg: ldo6 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_sd0_reg: ldo9 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vdd_sd1_reg: ldo10 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vdd_mx6_high_reg: ldo11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
};
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
imx6q-phytec-pfla02 {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */
>;
};
pinctrl_ecspi3: ecspi3grp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
>;
};
pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
>;
};
pinctrl_usbh1: usbh1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
>;
};
pinctrl_usdhc3_cdwp: usdhc3cdwp {
fsl,pins = <
MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
>;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
status = "disabled";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
status = "disabled";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "disabled";
};
&usbh1 {
vbus-supply = <&reg_usb_h1_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
status = "disabled";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
status = "disabled";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio1 4 0>;
wp-gpios = <&gpio1 2 0>;
status = "disabled";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3
&pinctrl_usdhc3_cdwp>;
cd-gpios = <&gpio1 27 0>;
wp-gpios = <&gpio1 29 0>;
status = "disabled";
};
arch/arm/boot/dts/imx6q-udoo.dts
View file @ 072a4fd2
......@@ -16,6 +16,10 @@ / {
model = "Udoo i.MX6 Quad Board";
compatible = "udoo,imx6q-udoo", "fsl,imx6q";
chosen {
stdout-path = &uart2;
};
memory {
reg = <0x10000000 0x40000000>;
};
......@@ -28,6 +32,18 @@ &fec {
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
};
&iomuxc {
imx6q-udoo {
pinctrl_enet: enetgrp {
......@@ -51,6 +67,13 @@ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
......
arch/arm/boot/dts/imx6qdl-cubox-i.dtsi
View file @ 072a4fd2
......@@ -55,6 +55,20 @@ sound-spdif {
};
};
&hdmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_hdmi>;
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_i2c2>;
status = "okay";
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_cubox_i_i2c3>;
......@@ -69,6 +83,19 @@ rtc: pcf8523@68 {
&iomuxc {
cubox_i {
pinctrl_cubox_i_hdmi: cubox-i-hdmi {
fsl,pins = <
MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
>;
};
pinctrl_cubox_i_i2c2: cubox-i-i2c2 {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_cubox_i_i2c3: cubox-i-i2c3 {
fsl,pins = <
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
......
arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
View file @ 072a4fd2
......@@ -22,7 +22,7 @@ reg_usb_otg_vbus: regulator@1 {
};
chosen {
linux,stdout-path = &uart1;
stdout-path = &uart1;
};
};
......
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
View file @ 072a4fd2
......@@ -101,6 +101,11 @@ &gpmi {
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c3>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
......
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
View file @ 072a4fd2
......@@ -27,6 +27,13 @@ chosen {
bootargs = "console=ttymxc1,115200";
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
leds {
compatible = "gpio-leds";
......@@ -148,6 +155,11 @@ &gpmi {
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c3>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
......@@ -394,6 +406,12 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
......@@ -436,6 +454,27 @@ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
&ldb {
status = "okay";
lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";
display-timings {
native-mode = <&timing0>;
timing0: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
hback-porch = <220>;
hfront-porch = <40>;
vback-porch = <21>;
vfront-porch = <7>;
hsync-len = <60>;
vsync-len = <10>;
};
};
};
};
&pcie {
......@@ -443,6 +482,12 @@ &pcie {
status = "okay";
};
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
};
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
......
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
View file @ 072a4fd2
......@@ -30,6 +30,13 @@ chosen {
bootargs = "console=ttymxc1,115200";
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
leds {
compatible = "gpio-leds";
......@@ -157,6 +164,11 @@ &gpmi {
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c3>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
......@@ -434,6 +446,12 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
......@@ -508,6 +526,12 @@ eth1: sky2@8 { /* MAC/PHY on bus 8 */
};
};
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
};
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
......
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
View file @ 072a4fd2
......@@ -30,6 +30,13 @@ chosen {
bootargs = "console=ttymxc1,115200";
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm4 0 5000000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
};
leds {
compatible = "gpio-leds";
......@@ -147,6 +154,11 @@ &gpmi {
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c3>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
......@@ -456,6 +468,12 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_pwm4: pwm4grp {
fsl,pins = <
MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
......@@ -530,6 +548,12 @@ eth1: sky2@8 { /* MAC/PHY on bus 8 */
};
};
&pwm4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm4>;
status = "okay";
};
&ssi1 {
fsl,mode = "i2s-slave";
status = "okay";
......
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
View file @ 072a4fd2
......@@ -14,6 +14,10 @@
#include <dt-bindings/input/input.h>
/ {
chosen {
stdout-path = &uart2;
};
memory {
reg = <0x10000000 0x40000000>;
};
......
arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi 0 → 100644
View file @ 072a4fd2
/*
* Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/ {
chosen {
linux,stdout-path = &uart4;
};
};
&fec {
status = "okay";
};
&gpmi {
status = "okay";
};
&hdmi {
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock-frequency = <100000>;
status = "okay";
tlv320@18 {
compatible = "ti,tlv320aic3x";
reg = <0x18>;
};
stmpe@41 {
compatible = "st,stmpe811";
reg = <0x41>;
};
rtc@51 {
compatible = "nxp,rtc8564";
reg = <0x51>;
};
adc@64 {
compatible = "maxim,max1037";
reg = <0x64>;
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
clock-frequency = <100000>;
status = "okay";
};
&uart3 {
status = "okay";
};
&uart4 {
status = "okay";
};
&usbh1 {
status = "okay";
};
&usbotg {
status = "okay";
};
&usdhc2 {
status = "okay";
};
&usdhc3 {
status = "okay";
};
&iomuxc {
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
>;
};
};
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi 0 → 100644
View file @ 072a4fd2
/*
* Copyright 2013 Christian Hemp, Phytec Messtechnik GmbH
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Phytec phyFLEX-i.MX6 Ouad";
compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
memory {
reg = <0x10000000 0x80000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb_otg_vbus: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio4 15 0>;
};
reg_usb_h1_vbus: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "usb_h1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 0 0>;
};
};
gpio_leds: leds {
compatible = "gpio-leds";
green {
label = "phyflex:green";
gpios = <&gpio1 30 0>;
};
red {
label = "phyflex:red";
gpios = <&gpio2 31 0>;
};
};
};
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
fsl,spi-num-chipselects = <1>;
cs-gpios = <&gpio4 24 0>;
flash@0 {
compatible = "m25p80";
spi-max-frequency = <20000000>;
reg = <0>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
eeprom@50 {
compatible = "atmel,24c32";
reg = <0x50>;
};
pmic@58 {
compatible = "dialog,da9063";
reg = <0x58>;
interrupt-parent = <&gpio4>;
interrupts = <17 0x8>; /* active-low GPIO4_17 */
regulators {
vddcore_reg: bcore1 {
regulator-min-microvolt = <730000>;
regulator-max-microvolt = <1380000>;
regulator-always-on;
};
vddsoc_reg: bcore2 {
regulator-min-microvolt = <730000>;
regulator-max-microvolt = <1380000>;
regulator-always-on;
};
vdd_ddr3_reg: bpro {
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
};
vdd_3v3_reg: bperi {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_buckmem_reg: bmem {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_eth_reg: bio {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
vdd_eth_io_reg: ldo4 {
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
vdd_mx6_snvs_reg: ldo5 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
vdd_3v3_pmic_io_reg: ldo6 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_sd0_reg: ldo9 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vdd_sd1_reg: ldo10 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vdd_mx6_high_reg: ldo11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
};
};
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
imx6q-phytec-pfla02 {
pinctrl_hog: hoggrp {
fsl,pins = <
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
>;
};
pinctrl_ecspi3: ecspi3grp {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
>;
};
pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1
MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
MX6QDL_PAD_EIM_D30__UART3_RTS_B 0x1b0b1
MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1
>;
};
pinctrl_uart4: uart4grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
>;
};
pinctrl_usbh1: usbh1grp {
fsl,pins = <
MX6QDL_PAD_GPIO_0__USB_H1_PWR 0x80000000
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
>;
};
pinctrl_usdhc3_cdwp: usdhc3cdwp {
fsl,pins = <
MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
>;
};
};
};
&fec {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet>;
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
status = "disabled";
};
&gpmi {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpmi_nand>;
nand-on-flash-bbt;
status = "disabled";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
status = "disabled";
};
&uart4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart4>;
status = "disabled";
};
&usbh1 {
vbus-supply = <&reg_usb_h1_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1>;
status = "disabled";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg>;
disable-over-current;
status = "disabled";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
cd-gpios = <&gpio1 4 0>;
wp-gpios = <&gpio1 2 0>;
status = "disabled";
};
&usdhc3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc3
&pinctrl_usdhc3_cdwp>;
cd-gpios = <&gpio1 27 0>;
wp-gpios = <&gpio1 29 0>;
status = "disabled";
};
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
View file @ 072a4fd2
......@@ -13,6 +13,10 @@
#include <dt-bindings/input/input.h>
/ {
chosen {
stdout-path = &uart2;
};
memory {
reg = <0x10000000 0x40000000>;
};
......
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
View file @ 072a4fd2
......@@ -14,6 +14,10 @@
#include <dt-bindings/input/input.h>
/ {
chosen {
stdout-path = &uart1;
};
memory {
reg = <0x10000000 0x40000000>;
};
......@@ -105,6 +109,17 @@ backlight {
default-brightness-level = <7>;
status = "okay";
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
red {
gpios = <&gpio1 2 0>;
default-state = "on";
};
};
};
&audmux {
......@@ -137,6 +152,11 @@ &fec {
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c2>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
......@@ -373,6 +393,12 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
>;
};
pinctrl_pwm1: pwm1grp {
fsl,pins = <
MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
......@@ -421,6 +447,29 @@ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
>;
};
pinctrl_usdhc4: usdhc4grp {
fsl,pins = <
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
>;
};
};
gpio_leds {
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000
>;
};
};
};
......@@ -449,6 +498,13 @@ timing0: hsd100pxn1 {
};
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio7 12 0>;
status = "okay";
};
&pwm1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm1>;
......@@ -496,3 +552,12 @@ &usdhc3 {
wp-gpios = <&gpio2 1 0>;
status = "okay";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
bus-width = <8>;
non-removable;
no-1-8-v;
status = "okay";
};
arch/arm/boot/dts/imx6qdl-wandboard.dtsi
View file @ 072a4fd2
......@@ -62,6 +62,18 @@ &audmux {
status = "okay";
};
&hdmi {
ddc-i2c-bus = <&i2c1>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
};
&i2c2 {
clock-frequency = <100000>;
pinctrl-names = "default";
......@@ -127,6 +139,13 @@ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
......
arch/arm/boot/dts/imx6qdl.dtsi
View file @ 072a4fd2
......@@ -16,6 +16,7 @@
/ {
aliases {
ethernet0 = &fec;
can0 = &can1;
can1 = &can2;
gpio0 = &gpio1;
......@@ -140,15 +141,16 @@ pcie: pcie@0x01000000 {
0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
num-lanes = <1>;
interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
<0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>;
clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi";
clocks = <&clks 144>, <&clks 206>, <&clks 189>;
clock-names = "pcie", "pcie_bus", "pcie_phy";
status = "disabled";
};
......
arch/arm/boot/dts/imx6sl.dtsi
View file @ 072a4fd2
......@@ -14,6 +14,7 @@
/ {
aliases {
ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
......
arch/arm/boot/dts/vf610-colibri.dts 0 → 100644
View file @ 072a4fd2
/*
* Copyright 2014 Toradex AG
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/dts-v1/;
#include "vf610.dtsi"
/ {
model = "Toradex Colibri VF61 COM";
compatible = "toradex,vf610-colibri", "fsl,vf610";
chosen {
bootargs = "console=ttyLP0,115200";
};
memory {
reg = <0x80000000 0x10000000>;
};
clocks {
enet_ext {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
};
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
status = "okay";
};
&fec1 {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
};
&L2 {
arm,data-latency = <2 1 2>;
arm,tag-latency = <3 2 3>;
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&iomuxc {
vf610-colibri {
pinctrl_esdhc1: esdhc1grp {
fsl,fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
VF610_PAD_PTB20__GPIO_42 0x219d
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
>;
};
pinctrl_uart0: uart0grp {
fsl,pins = <
VF610_PAD_PTB10__UART0_TX 0x21a2
VF610_PAD_PTB11__UART0_RX 0x21a1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
VF610_PAD_PTB4__UART1_TX 0x21a2
VF610_PAD_PTB5__UART1_RX 0x21a1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
VF610_PAD_PTD0__UART2_TX 0x21a2
VF610_PAD_PTD1__UART2_RX 0x21a1
VF610_PAD_PTD2__UART2_RTS 0x21a2
VF610_PAD_PTD3__UART2_CTS 0x21a1
>;
};
};
};
arch/arm/boot/dts/vf610-twr.dts
View file @ 072a4fd2
......@@ -113,6 +113,13 @@ sflash: at26df081a@0 {
};
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
status = "okay";
};
&fec0 {
phy-mode = "rmii";
pinctrl-names = "default";
......@@ -160,6 +167,18 @@ VF610_PAD_PTB22__DSPI0_SCK 0x1182
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,fsl,pins = <
VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
VF610_PAD_PTA7__GPIO_134 0x219d
>;
};
pinctrl_fec0: fec0grp {
fsl,pins = <
VF610_PAD_PTA6__RMII_CLKIN 0x30d1
......@@ -196,6 +215,17 @@ VF610_PAD_PTB15__I2C0_SDA 0x30d3
>;
};
pinctrl_pwm0: pwm0grp {
fsl,pins = <
VF610_PAD_PTB0__FTM0_CH0 0x1582
VF610_PAD_PTB1__FTM0_CH1 0x1582
VF610_PAD_PTB2__FTM0_CH2 0x1582
VF610_PAD_PTB3__FTM0_CH3 0x1582
VF610_PAD_PTB6__FTM0_CH6 0x1582
VF610_PAD_PTB7__FTM0_CH7 0x1582
>;
};
pinctrl_sai2: sai2grp {
fsl,pins = <
VF610_PAD_PTA16__SAI2_TX_BCLK 0x02ed
......@@ -217,6 +247,12 @@ VF610_PAD_PTB5__UART1_RX 0x21a1
};
};
&pwm0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0>;
status = "okay";
};
&sai2 {
#sound-dai-cells = <0>;
pinctrl-names = "default";
......
arch/arm/boot/dts/vf610.dtsi
View file @ 072a4fd2
......@@ -183,6 +183,19 @@ pit: pit@40037000 {
clock-names = "pit";
};
pwm0: pwm@40038000 {
compatible = "fsl,vf610-ftm-pwm";
#pwm-cells = <3>;
reg = <0x40038000 0x1000>;
clock-names = "ftm_sys", "ftm_ext",
"ftm_fix", "ftm_cnt_clk_en";
clocks = <&clks VF610_CLK_FTM0>,
<&clks VF610_CLK_FTM0_EXT_SEL>,
<&clks VF610_CLK_FTM0_FIX_SEL>,
<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
status = "disabled";
};
adc0: adc@4003b000 {
compatible = "fsl,vf610-adc";
reg = <0x4003b000 0x1000>;
......@@ -347,6 +360,17 @@ adc1: adc@400bb000 {
status = "disabled";
};
esdhc1: esdhc@400b2000 {
compatible = "fsl,imx53-esdhc";
reg = <0x400b2000 0x4000>;
interrupts = <0 28 0x04>;
clocks = <&clks VF610_CLK_IPG_BUS>,
<&clks VF610_CLK_PLATFORM_BUS>,
<&clks VF610_CLK_ESDHC1>;
clock-names = "ipg", "ahb", "per";
status = "disabled";
};
fec0: ethernet@400d0000 {
compatible = "fsl,mvf600-fec";
reg = <0x400d0000 0x1000>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7