[media] gspca - ov519: Add the sensor ov2610ae

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/video/gspca/ov519.c

@@ -118,6 +118,7 @@ struct sd {
 };
 enum sensors {
 	SEN_OV2610,
+	SEN_OV2610AE,
 	SEN_OV3610,
 	SEN_OV6620,
 	SEN_OV6630,
@@ -239,6 +240,8 @@ static const struct ctrl sd_ctrls[] = {
 static const unsigned ctrl_dis[] = {
 [SEN_OV2610] =		(1 << NCTRL) - 1,	/* no control */
 
+[SEN_OV2610AE] =	(1 << NCTRL) - 1,	/* no control */
+
 [SEN_OV3610] =		(1 << NCTRL) - 1,	/* no control */
 
 [SEN_OV6620] =		(1 << HFLIP) |
@@ -656,6 +659,24 @@ static const struct ov_i2c_regvals norm_2610[] = {
 	{ 0x12, 0x80 },	/* reset */
 };
 
+static const struct ov_i2c_regvals norm_2610ae[] = {
+	{0x12, 0x80},	/* reset */
+	{0x13, 0xcd},
+	{0x09, 0x01},
+	{0x0d, 0x00},
+	{0x11, 0x80},
+	{0x12, 0x20},	/* 1600x1200 */
+	{0x33, 0x0c},
+	{0x35, 0x90},
+	{0x36, 0x37},
+/* ms-win traces */
+	{0x11, 0x83},	/* clock / 3 ? */
+	{0x2d, 0x00},	/* 60 Hz filter */
+	{0x24, 0xb0},	/* normal colors */
+	{0x25, 0x90},
+	{0x10, 0x43},
+};
+
 static const struct ov_i2c_regvals norm_3620b[] = {
 	/*
 	 * From the datasheet: "Note that after writing to register COMH
@@ -2621,6 +2642,9 @@ static void ov_hires_configure(struct sd *sd)
 	if (high == 0x96 && low == 0x40) {
 		PDEBUG(D_PROBE, "Sensor is an OV2610");
 		sd->sensor = SEN_OV2610;
+	} else if (high == 0x96 && low == 0x41) {
+		PDEBUG(D_PROBE, "Sensor is an OV2610AE");
+		sd->sensor = SEN_OV2610AE;
 	} else if (high == 0x36 && (low & 0x0f) == 0x00) {
 		PDEBUG(D_PROBE, "Sensor is an OV3610");
 		sd->sensor = SEN_OV3610;
@@ -3295,15 +3319,22 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		}
 		break;
 	case BRIDGE_OVFX2:
-		if (sd->sensor == SEN_OV2610) {
+		switch (sd->sensor) {
+		case SEN_OV2610:
+		case SEN_OV2610AE:
 			cam->cam_mode = ovfx2_ov2610_mode;
 			cam->nmodes = ARRAY_SIZE(ovfx2_ov2610_mode);
-		} else if (sd->sensor == SEN_OV3610) {
+			break;
+		case SEN_OV3610:
 			cam->cam_mode = ovfx2_ov3610_mode;
 			cam->nmodes = ARRAY_SIZE(ovfx2_ov3610_mode);
-		} else if (sd->sif) {
-			cam->cam_mode = ov519_sif_mode;
-			cam->nmodes = ARRAY_SIZE(ov519_sif_mode);
+			break;
+		default:
+			if (sd->sif) {
+				cam->cam_mode = ov519_sif_mode;
+				cam->nmodes = ARRAY_SIZE(ov519_sif_mode);
+			}
+			break;
 		}
 		break;
 	case BRIDGE_W9968CF:
@@ -3325,6 +3356,12 @@ static int sd_init(struct gspca_dev *gspca_dev)
 		/* Enable autogain, autoexpo, awb, bandfilter */
 		i2c_w_mask(sd, 0x13, 0x27, 0x27);
 		break;
+	case SEN_OV2610AE:
+		write_i2c_regvals(sd, norm_2610ae, ARRAY_SIZE(norm_2610ae));
+
+		/* enable autoexpo */
+		i2c_w_mask(sd, 0x13, 0x05, 0x05);
+		break;
 	case SEN_OV3610:
 		write_i2c_regvals(sd, norm_3620b, ARRAY_SIZE(norm_3620b));
 
@@ -3827,6 +3864,25 @@ static void mode_init_ov_sensor_regs(struct sd *sd)
 		i2c_w_mask(sd, 0x67, qvga ? 0xf0 : 0x90, 0xf0);
 		i2c_w_mask(sd, 0x74, qvga ? 0x20 : 0x00, 0x20);
 		return;
+	case SEN_OV2610AE: {
+		u8 v;
+
+		/* frame rates:
+		 *	10fps / 5 fps for 1600x1200
+		 *	40fps / 20fps for 800x600
+		 */
+		v = 80;
+		if (qvga) {
+			if (sd->frame_rate < 25)
+				v = 0x81;
+		} else {
+			if (sd->frame_rate < 10)
+				v = 0x81;
+		}
+		i2c_w(sd, 0x11, v);
+		i2c_w(sd, 0x12, qvga ? 0x60 : 0x20);
+		return;
+	    }
 	case SEN_OV3610:
 		if (qvga) {
 			xstart = (1040 - gspca_dev->width) / 2 + (0x1f << 4);
@@ -3975,6 +4031,7 @@ static void set_ov_sensor_window(struct sd *sd)
 	/* mode setup is fully handled in mode_init_ov_sensor_regs for these */
 	switch (sd->sensor) {
 	case SEN_OV2610:
+	case SEN_OV2610AE:
 	case SEN_OV3610:
 	case SEN_OV7670:
 		mode_init_ov_sensor_regs(sd);