Commit 08fb68bb authored by David Brownell's avatar David Brownell Committed by Jean Delvare

i2c: Move i2c-dev interfaces to i2c-dev.h

Move the i2c-dev support into <linux/i2c-dev.h> where it should always
have lived.  Now <linux/i2c.h> no longer holds stuff related to the
optional userspace /dev/i2c-X interface.  Improve the descriptions
for these ioctl requests.
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 53be7959
......@@ -25,8 +25,31 @@
#include <linux/types.h>
#include <linux/compiler.h>
/* Some IOCTL commands are defined in <linux/i2c.h> */
/* Note: 10-bit addresses are NOT supported! */
/* /dev/i2c-X ioctl commands. The ioctl's parameter is always an
* unsigned long, except for:
* - I2C_FUNCS, takes pointer to an unsigned long
* - I2C_RDWR, takes pointer to struct i2c_rdwr_ioctl_data
* - I2C_SMBUS, takes pointer to struct i2c_smbus_ioctl_data
*/
#define I2C_RETRIES 0x0701 /* number of times a device address should
be polled when not acknowledging */
#define I2C_TIMEOUT 0x0702 /* set timeout in jiffies - call with int */
/* NOTE: Slave address is 7 or 10 bits, but 10-bit addresses
* are NOT supported! (due to code brokenness)
*/
#define I2C_SLAVE 0x0703 /* Use this slave address */
#define I2C_SLAVE_FORCE 0x0706 /* Use this slave address, even if it
is already in use by a driver! */
#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */
#define I2C_FUNCS 0x0705 /* Get the adapter functionality mask */
#define I2C_RDWR 0x0707 /* Combined R/W transfer (one STOP only) */
#define I2C_PEC 0x0708 /* != 0 to use PEC with SMBus */
#define I2C_SMBUS 0x0720 /* SMBus transfer */
/* This is the structure as used in the I2C_SMBUS ioctl call */
struct i2c_smbus_ioctl_data {
......@@ -44,4 +67,8 @@ struct i2c_rdwr_ioctl_data {
#define I2C_RDRW_IOCTL_MAX_MSGS 42
#ifdef __KERNEL__
#define I2C_MAJOR 89 /* Device major number */
#endif
#endif /* _LINUX_I2C_DEV_H */
......@@ -557,38 +557,8 @@ union i2c_smbus_data {
#define I2C_SMBUS_I2C_BLOCK_DATA 8
/* ----- commands for the ioctl like i2c_command call:
* note that additional calls are defined in the algorithm and hw
* dependent layers - these can be listed here, or see the
* corresponding header files.
*/
/* -> bit-adapter specific ioctls */
#define I2C_RETRIES 0x0701 /* number of times a device address */
/* should be polled when not */
/* acknowledging */
#define I2C_TIMEOUT 0x0702 /* set timeout - call with int */
/* this is for i2c-dev.c */
#define I2C_SLAVE 0x0703 /* Change slave address */
/* Attn.: Slave address is 7 or 10 bits */
#define I2C_SLAVE_FORCE 0x0706 /* Change slave address */
/* Attn.: Slave address is 7 or 10 bits */
/* This changes the address, even if it */
/* is already taken! */
#define I2C_TENBIT 0x0704 /* 0 for 7 bit addrs, != 0 for 10 bit */
#define I2C_FUNCS 0x0705 /* Get the adapter functionality */
#define I2C_RDWR 0x0707 /* Combined R/W transfer (one stop only)*/
#define I2C_PEC 0x0708 /* != 0 for SMBus PEC */
#define I2C_SMBUS 0x0720 /* SMBus-level access */
/* ----- I2C-DEV: char device interface stuff ------------------------- */
#ifdef __KERNEL__
#define I2C_MAJOR 89 /* Device major number */
/* These defines are used for probing i2c client addresses */
/* The length of the option lists */
#define I2C_CLIENT_MAX_OPTS 48
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment