USB: musb: use correct register widths in register dumps

DMA_ADDR and DMA_COUNT are 32-bit registers, not 16-bit.

Marking them as 16-bit in the table causes only the lower
16-bits to be dumped and this is misleading.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Acked-by: Felipe Balbi <felipe.balbi@nokia.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/musb/musb_debugfs.c

@@ -92,29 +92,29 @@ static const struct musb_register_map musb_regmap[] = {
 	{ "LS_EOF1",		0x7E,	8 },
 	{ "SOFT_RST",		0x7F,	8 },
 	{ "DMA_CNTLch0",	0x204,	16 },
-	{ "DMA_ADDRch0",	0x208,	16 },
-	{ "DMA_COUNTch0",	0x20C,	16 },
+	{ "DMA_ADDRch0",	0x208,	32 },
+	{ "DMA_COUNTch0",	0x20C,	32 },
 	{ "DMA_CNTLch1",	0x214,	16 },
-	{ "DMA_ADDRch1",	0x218,	16 },
-	{ "DMA_COUNTch1",	0x21C,	16 },
+	{ "DMA_ADDRch1",	0x218,	32 },
+	{ "DMA_COUNTch1",	0x21C,	32 },
 	{ "DMA_CNTLch2",	0x224,	16 },
-	{ "DMA_ADDRch2",	0x228,	16 },
-	{ "DMA_COUNTch2",	0x22C,	16 },
+	{ "DMA_ADDRch2",	0x228,	32 },
+	{ "DMA_COUNTch2",	0x22C,	32 },
 	{ "DMA_CNTLch3",	0x234,	16 },
-	{ "DMA_ADDRch3",	0x238,	16 },
-	{ "DMA_COUNTch3",	0x23C,	16 },
+	{ "DMA_ADDRch3",	0x238,	32 },
+	{ "DMA_COUNTch3",	0x23C,	32 },
 	{ "DMA_CNTLch4",	0x244,	16 },
-	{ "DMA_ADDRch4",	0x248,	16 },
-	{ "DMA_COUNTch4",	0x24C,	16 },
+	{ "DMA_ADDRch4",	0x248,	32 },
+	{ "DMA_COUNTch4",	0x24C,	32 },
 	{ "DMA_CNTLch5",	0x254,	16 },
-	{ "DMA_ADDRch5",	0x258,	16 },
-	{ "DMA_COUNTch5",	0x25C,	16 },
+	{ "DMA_ADDRch5",	0x258,	32 },
+	{ "DMA_COUNTch5",	0x25C,	32 },
 	{ "DMA_CNTLch6",	0x264,	16 },
-	{ "DMA_ADDRch6",	0x268,	16 },
-	{ "DMA_COUNTch6",	0x26C,	16 },
+	{ "DMA_ADDRch6",	0x268,	32 },
+	{ "DMA_COUNTch6",	0x26C,	32 },
 	{ "DMA_CNTLch7",	0x274,	16 },
-	{ "DMA_ADDRch7",	0x278,	16 },
-	{ "DMA_COUNTch7",	0x27C,	16 },
+	{ "DMA_ADDRch7",	0x278,	32 },
+	{ "DMA_COUNTch7",	0x27C,	32 },
 	{  }	/* Terminating Entry */
 };