Commit 09ed6ba4 authored by Hersen Wu's avatar Hersen Wu Committed by Alex Deucher

drm/amdgpu/display: navi1x copy dcn watermark clock settings to smu resume from s3 (v2)

 This interface is for dGPU Navi1x. Linux dc-pplib interface depends
 on window driver dc implementation.

 For Navi1x, clock settings of dcn watermarks are fixed. the settings
 should be passed to smu during boot up and resume from s3.
 boot up: dc calculate dcn watermark clock settings within dc_create,
 dcn20_resource_construct, then call pplib functions below to pass
 the settings to smu:
 smu_set_watermarks_for_clock_ranges
 smu_set_watermarks_table
 navi10_set_watermarks_table
 smu_write_watermarks_table

 For Renoir, clock settings of dcn watermark are also fixed values.
 dc has implemented different flow for window driver:
 dc_hardware_init / dc_set_power_state
 dcn10_init_hw
 notify_wm_ranges
 set_wm_ranges

 For Linux
 smu_set_watermarks_for_clock_ranges
 renoir_set_watermarks_table
 smu_write_watermarks_table

 dc_hardware_init -> amdgpu_dm_init
 dc_set_power_state --> dm_resume

 therefore, linux dc-pplib interface of navi10/12/14 is different
 from that of Renoir.

v2: add missing unlock in error case
Signed-off-by: default avatarHersen Wu <hersenxs.wu@amd.com>
Reviewed-by: default avatarEvan Quan <evan.quan@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent ab65a371
......@@ -1422,6 +1422,73 @@ static void s3_handle_mst(struct drm_device *dev, bool suspend)
drm_kms_helper_hotplug_event(dev);
}
static int amdgpu_dm_smu_write_watermarks_table(struct amdgpu_device *adev)
{
struct smu_context *smu = &adev->smu;
int ret = 0;
if (!is_support_sw_smu(adev))
return 0;
/* This interface is for dGPU Navi1x.Linux dc-pplib interface depends
* on window driver dc implementation.
* For Navi1x, clock settings of dcn watermarks are fixed. the settings
* should be passed to smu during boot up and resume from s3.
* boot up: dc calculate dcn watermark clock settings within dc_create,
* dcn20_resource_construct
* then call pplib functions below to pass the settings to smu:
* smu_set_watermarks_for_clock_ranges
* smu_set_watermarks_table
* navi10_set_watermarks_table
* smu_write_watermarks_table
*
* For Renoir, clock settings of dcn watermark are also fixed values.
* dc has implemented different flow for window driver:
* dc_hardware_init / dc_set_power_state
* dcn10_init_hw
* notify_wm_ranges
* set_wm_ranges
* -- Linux
* smu_set_watermarks_for_clock_ranges
* renoir_set_watermarks_table
* smu_write_watermarks_table
*
* For Linux,
* dc_hardware_init -> amdgpu_dm_init
* dc_set_power_state --> dm_resume
*
* therefore, this function apply to navi10/12/14 but not Renoir
* *
*/
switch(adev->asic_type) {
case CHIP_NAVI10:
case CHIP_NAVI14:
case CHIP_NAVI12:
break;
default:
return 0;
}
mutex_lock(&smu->mutex);
/* pass data to smu controller */
if ((smu->watermarks_bitmap & WATERMARKS_EXIST) &&
!(smu->watermarks_bitmap & WATERMARKS_LOADED)) {
ret = smu_write_watermarks_table(smu);
if (ret) {
mutex_unlock(&smu->mutex);
DRM_ERROR("Failed to update WMTABLE!\n");
return ret;
}
smu->watermarks_bitmap |= WATERMARKS_LOADED;
}
mutex_unlock(&smu->mutex);
return 0;
}
/**
* dm_hw_init() - Initialize DC device
* @handle: The base driver device containing the amdgpu_dm device.
......@@ -1700,6 +1767,8 @@ static int dm_resume(void *handle)
amdgpu_dm_irq_resume_late(adev);
amdgpu_dm_smu_write_watermarks_table(adev);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment