usb: makefile cleanup

For all modules, change <module>-objs to <module>-y; remove
if-statements and replace with lists using the kbuild idiom; move
flags to the top of the file; and fix alignment while trying to
maintain the original scheme in each file.

None of the dependencies are modified.
Signed-off-by: matt mooney <mfm@muteddisk.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/atm/Makefile

@@ -2,10 +2,10 @@
 # Makefile for USB ATM/xDSL drivers
 #
 
+ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
+
 obj-$(CONFIG_USB_CXACRU)	+= cxacru.o
 obj-$(CONFIG_USB_SPEEDTOUCH)	+= speedtch.o
 obj-$(CONFIG_USB_UEAGLEATM)	+= ueagle-atm.o
 obj-$(CONFIG_USB_ATM)		+= usbatm.o
 obj-$(CONFIG_USB_XUSBATM)	+= xusbatm.o
-
-ccflags-$(CONFIG_USB_DEBUG)	:= -DDEBUG

drivers/usb/c67x00/Makefile

@@ -2,8 +2,8 @@
 # Makefile for Cypress C67X00 USB Controller
 #
 
-ccflags-$(CONFIG_USB_DEBUG)		+= -DDEBUG
+ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
-obj-$(CONFIG_USB_C67X00_HCD)		+= c67x00.o
+obj-$(CONFIG_USB_C67X00_HCD)	+= c67x00.o
 
-c67x00-objs := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o
+c67x00-y := c67x00-drv.o c67x00-ll-hpi.o c67x00-hcd.o c67x00-sched.o

drivers/usb/core/Makefile

@@ -2,18 +2,13 @@
 # Makefile for USB Core files and filesystem
 #
 
-usbcore-objs	:= usb.o hub.o hcd.o urb.o message.o driver.o \
-			config.o file.o buffer.o sysfs.o endpoint.o \
-			devio.o notify.o generic.o quirks.o devices.o
-
-ifeq ($(CONFIG_PCI),y)
-	usbcore-objs	+= hcd-pci.o
-endif
+ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
-ifeq ($(CONFIG_USB_DEVICEFS),y)
-	usbcore-objs	+= inode.o
-endif
+usbcore-y := usb.o hub.o hcd.o urb.o message.o driver.o
+usbcore-y += config.o file.o buffer.o sysfs.o endpoint.o
+usbcore-y += devio.o notify.o generic.o quirks.o devices.o
 
-obj-$(CONFIG_USB)	+= usbcore.o
+usbcore-$(CONFIG_PCI)		+= hcd-pci.o
+usbcore-$(CONFIG_USB_DEVICEFS)	+= inode.o
 
-ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
+obj-$(CONFIG_USB)		+= usbcore.o

drivers/usb/early/Makefile

@@ -2,4 +2,4 @@
 # Makefile for early USB devices
 #
 
-obj-$(CONFIG_EARLY_PRINTK_DBGP)        += ehci-dbgp.o
+obj-$(CONFIG_EARLY_PRINTK_DBGP) += ehci-dbgp.o

drivers/usb/gadget/Makefile

 #
 # USB peripheral controller drivers
 #
-ccflags-$(CONFIG_USB_GADGET_DEBUG)	:= -DDEBUG
+ccflags-$(CONFIG_USB_GADGET_DEBUG) := -DDEBUG
 
 obj-$(CONFIG_USB_DUMMY_HCD)	+= dummy_hcd.o
 obj-$(CONFIG_USB_NET2280)	+= net2280.o
@@ -16,10 +16,8 @@ obj-$(CONFIG_USB_S3C2410)	+= s3c2410_udc.o
 obj-$(CONFIG_USB_AT91)		+= at91_udc.o
 obj-$(CONFIG_USB_ATMEL_USBA)	+= atmel_usba_udc.o
 obj-$(CONFIG_USB_FSL_USB2)	+= fsl_usb2_udc.o
-fsl_usb2_udc-objs		:= fsl_udc_core.o
-ifeq ($(CONFIG_ARCH_MXC),y)
-fsl_usb2_udc-objs		+= fsl_mxc_udc.o
-endif
+fsl_usb2_udc-y			:= fsl_udc_core.o
+fsl_usb2_udc-$(CONFIG_ARCH_MXC)	+= fsl_mxc_udc.o
 obj-$(CONFIG_USB_M66592)	+= m66592-udc.o
 obj-$(CONFIG_USB_R8A66597)	+= r8a66597-udc.o
 obj-$(CONFIG_USB_FSL_QE)	+= fsl_qe_udc.o
@@ -30,21 +28,21 @@ obj-$(CONFIG_USB_LANGWELL)	+= langwell_udc.o
 #
 # USB gadget drivers
 #
-g_zero-objs			:= zero.o
-g_audio-objs			:= audio.o
-g_ether-objs			:= ether.o
-g_serial-objs			:= serial.o
-g_midi-objs			:= gmidi.o
-gadgetfs-objs			:= inode.o
-g_file_storage-objs		:= file_storage.o
-g_mass_storage-objs		:= mass_storage.o
-g_printer-objs			:= printer.o
-g_cdc-objs			:= cdc2.o
-g_multi-objs			:= multi.o
-g_hid-objs			:= hid.o
-g_dbgp-objs			:= dbgp.o
-g_nokia-objs			:= nokia.o
-g_webcam-objs			:= webcam.o
+g_zero-y			:= zero.o
+g_audio-y			:= audio.o
+g_ether-y			:= ether.o
+g_serial-y			:= serial.o
+g_midi-y			:= gmidi.o
+gadgetfs-y			:= inode.o
+g_file_storage-y		:= file_storage.o
+g_mass_storage-y		:= mass_storage.o
+g_printer-y			:= printer.o
+g_cdc-y				:= cdc2.o
+g_multi-y			:= multi.o
+g_hid-y				:= hid.o
+g_dbgp-y			:= dbgp.o
+g_nokia-y			:= nokia.o
+g_webcam-y			:= webcam.o
 
 obj-$(CONFIG_USB_ZERO)		+= g_zero.o
 obj-$(CONFIG_USB_AUDIO)		+= g_audio.o
@@ -62,4 +60,3 @@ obj-$(CONFIG_USB_G_DBGP)	+= g_dbgp.o
 obj-$(CONFIG_USB_G_MULTI)	+= g_multi.o
 obj-$(CONFIG_USB_G_NOKIA)	+= g_nokia.o
 obj-$(CONFIG_USB_G_WEBCAM)	+= g_webcam.o
-

drivers/usb/host/Makefile

@@ -2,15 +2,17 @@
 # Makefile for USB Host Controller Drivers
 #
 
-ccflags-$(CONFIG_USB_DEBUG)	:= -DDEBUG
+ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
-isp1760-objs := isp1760-hcd.o isp1760-if.o
-fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \
-	     fhci-tds.o fhci-sched.o
-ifeq ($(CONFIG_FHCI_DEBUG),y)
-fhci-objs += fhci-dbg.o
-endif
-xhci-hcd-objs := xhci.o xhci-mem.o xhci-pci.o xhci-ring.o xhci-hub.o xhci-dbg.o
+isp1760-y := isp1760-hcd.o isp1760-if.o
+
+fhci-y := fhci-hcd.o fhci-hub.o fhci-q.o
+fhci-y += fhci-mem.o fhci-tds.o fhci-sched.o
+
+fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o
+
+xhci-hcd-y := xhci.o xhci-mem.o xhci-pci.o
+xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o
 
 obj-$(CONFIG_USB_WHCI_HCD)	+= whci/
 
@@ -32,4 +34,3 @@ obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
 obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
 obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
 obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
-

drivers/usb/host/whci/Kbuild

@@ -3,7 +3,7 @@ obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o
 whci-hcd-y := \
 	asl.o	\
 	debug.o \
-	hcd.o 	\
+	hcd.o	\
 	hw.o	\
 	init.o	\
 	int.o	\

drivers/usb/misc/Makefile

@@ -3,27 +3,27 @@
 # (the ones that don't fit into any other categories)
 #
 
-obj-$(CONFIG_USB_ADUTUX)	+= adutux.o
-obj-$(CONFIG_USB_APPLEDISPLAY)	+= appledisplay.o
-obj-$(CONFIG_USB_CYPRESS_CY7C63)+= cypress_cy7c63.o
-obj-$(CONFIG_USB_CYTHERM)	+= cytherm.o
-obj-$(CONFIG_USB_EMI26)		+= emi26.o
-obj-$(CONFIG_USB_EMI62)		+= emi62.o
-obj-$(CONFIG_USB_FTDI_ELAN)	+= ftdi-elan.o
-obj-$(CONFIG_USB_IDMOUSE)	+= idmouse.o
-obj-$(CONFIG_USB_IOWARRIOR)	+= iowarrior.o
-obj-$(CONFIG_USB_ISIGHTFW)	+= isight_firmware.o
-obj-$(CONFIG_USB_LCD)		+= usblcd.o
-obj-$(CONFIG_USB_LD)		+= ldusb.o
-obj-$(CONFIG_USB_LED)		+= usbled.o
-obj-$(CONFIG_USB_LEGOTOWER)	+= legousbtower.o
-obj-$(CONFIG_USB_RIO500)	+= rio500.o
-obj-$(CONFIG_USB_TEST)		+= usbtest.o
-obj-$(CONFIG_USB_TRANCEVIBRATOR)	+= trancevibrator.o
-obj-$(CONFIG_USB_USS720)	+= uss720.o
-obj-$(CONFIG_USB_SEVSEG)	+= usbsevseg.o
-obj-$(CONFIG_USB_YUREX)		+= yurex.o
+ccflags-$(CONFIG_USB_DEBUG) := -DDEBUG
 
-obj-$(CONFIG_USB_SISUSBVGA)	+= sisusbvga/
+obj-$(CONFIG_USB_ADUTUX)		+= adutux.o
+obj-$(CONFIG_USB_APPLEDISPLAY)		+= appledisplay.o
+obj-$(CONFIG_USB_CYPRESS_CY7C63)	+= cypress_cy7c63.o
+obj-$(CONFIG_USB_CYTHERM)		+= cytherm.o
+obj-$(CONFIG_USB_EMI26)			+= emi26.o
+obj-$(CONFIG_USB_EMI62)			+= emi62.o
+obj-$(CONFIG_USB_FTDI_ELAN)		+= ftdi-elan.o
+obj-$(CONFIG_USB_IDMOUSE)		+= idmouse.o
+obj-$(CONFIG_USB_IOWARRIOR)		+= iowarrior.o
+obj-$(CONFIG_USB_ISIGHTFW)		+= isight_firmware.o
+obj-$(CONFIG_USB_LCD)			+= usblcd.o
+obj-$(CONFIG_USB_LD)			+= ldusb.o
+obj-$(CONFIG_USB_LED)			+= usbled.o
+obj-$(CONFIG_USB_LEGOTOWER)		+= legousbtower.o
+obj-$(CONFIG_USB_RIO500)		+= rio500.o
+obj-$(CONFIG_USB_TEST)			+= usbtest.o
+obj-$(CONFIG_USB_TRANCEVIBRATOR)	+= trancevibrator.o
+obj-$(CONFIG_USB_USS720)		+= uss720.o
+obj-$(CONFIG_USB_SEVSEG)		+= usbsevseg.o
+obj-$(CONFIG_USB_YUREX)			+= yurex.o
 
-ccflags-$(CONFIG_USB_DEBUG)	:= -DDEBUG
+obj-$(CONFIG_USB_SISUSBVGA)		+= sisusbvga/

drivers/usb/misc/sisusbvga/Makefile

@@ -4,5 +4,4 @@
 
 obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga.o
 
-sisusbvga-objs := sisusb.o sisusb_init.o sisusb_con.o
-
+sisusbvga-y := sisusb.o sisusb_init.o sisusb_con.o

drivers/usb/mon/Makefile

@@ -2,6 +2,6 @@
 # Makefile for USB monitor
 #
 
-usbmon-objs	:= mon_main.o mon_stat.o mon_text.o mon_bin.o
+usbmon-y := mon_main.o mon_stat.o mon_text.o mon_bin.o
 
 obj-$(CONFIG_USB_MON)	+= usbmon.o

drivers/usb/musb/Makefile

@@ -2,53 +2,23 @@
 # for USB OTG silicon based on Mentor Graphics INVENTRA designs
 #
 
-musb_hdrc-objs := musb_core.o
-
-obj-$(CONFIG_USB_MUSB_HDRC)	+= musb_hdrc.o
-
-ifeq ($(CONFIG_ARCH_DAVINCI_DMx),y)
-	musb_hdrc-objs	+= davinci.o
-endif
-
-ifeq ($(CONFIG_ARCH_DAVINCI_DA8XX),y)
-	musb_hdrc-objs	+= da8xx.o
-endif
-
-ifeq ($(CONFIG_USB_TUSB6010),y)
-	musb_hdrc-objs	+= tusb6010.o
-endif
-
-ifeq ($(CONFIG_ARCH_OMAP2430),y)
-	musb_hdrc-objs	+= omap2430.o
-endif
-
-ifeq ($(CONFIG_ARCH_OMAP3430),y)
-	musb_hdrc-objs	+= omap2430.o
-endif
-
-ifeq ($(CONFIG_ARCH_OMAP4),y)
-	musb_hdrc-objs  += omap2430.o
-endif
+ccflags-$(CONFIG_USB_MUSB_DEBUG) := -DDEBUG
 
-ifeq ($(CONFIG_BF54x),y)
-	musb_hdrc-objs	+= blackfin.o
-endif
+obj-$(CONFIG_USB_MUSB_HDRC) += musb_hdrc.o
 
-ifeq ($(CONFIG_BF52x),y)
-	musb_hdrc-objs	+= blackfin.o
-endif
+musb_hdrc-y := musb_core.o
 
-ifeq ($(CONFIG_USB_GADGET_MUSB_HDRC),y)
-	musb_hdrc-objs		+= musb_gadget_ep0.o musb_gadget.o
-endif
-
-ifeq ($(CONFIG_USB_MUSB_HDRC_HCD),y)
-	musb_hdrc-objs		+= musb_virthub.o musb_host.o
-endif
-
-ifeq ($(CONFIG_DEBUG_FS),y)
-	musb_hdrc-objs		+= musb_debugfs.o
-endif
+musb_hdrc-$(CONFIG_ARCH_DAVINCI_DMx)		+= davinci.o
+musb_hdrc-$(CONFIG_ARCH_DAVINCI_DA8XX)		+= da8xx.o
+musb_hdrc-$(CONFIG_USB_TUSB6010)		+= tusb6010.o
+musb_hdrc-$(CONFIG_ARCH_OMAP2430)		+= omap2430.o
+musb_hdrc-$(CONFIG_ARCH_OMAP3430)		+= omap2430.o
+musb_hdrc-$(CONFIG_ARCH_OMAP4)			+= omap2430.o
+musb_hdrc-$(CONFIG_BF54x)			+= blackfin.o
+musb_hdrc-$(CONFIG_BF52x)			+= blackfin.o
+musb_hdrc-$(CONFIG_USB_GADGET_MUSB_HDRC)	+= musb_gadget_ep0.o musb_gadget.o
+musb_hdrc-$(CONFIG_USB_MUSB_HDRC_HCD)		+= musb_virthub.o musb_host.o
+musb_hdrc-$(CONFIG_DEBUG_FS)			+= musb_debugfs.o
 
 # the kconfig must guarantee that only one of the
 # possible I/O schemes will be enabled at a time ...
@@ -58,24 +28,17 @@ endif
 ifneq ($(CONFIG_MUSB_PIO_ONLY),y)
 
   ifeq ($(CONFIG_USB_INVENTRA_DMA),y)
-    musb_hdrc-objs		+= musbhsdma.o
+    musb_hdrc-y			+= musbhsdma.o
 
   else
     ifeq ($(CONFIG_USB_TI_CPPI_DMA),y)
-      musb_hdrc-objs		+= cppi_dma.o
+      musb_hdrc-y		+= cppi_dma.o
 
     else
       ifeq ($(CONFIG_USB_TUSB_OMAP_DMA),y)
-        musb_hdrc-objs		+= tusb6010_omap.o
+	musb_hdrc-y		+= tusb6010_omap.o
 
       endif
     endif
   endif
 endif
-
-
-################################################################################
-
-# Debugging
-
-ccflags-$(CONFIG_USB_MUSB_DEBUG) := -DDEBUG

drivers/usb/otg/Makefile

@@ -2,6 +2,9 @@
 # OTG infrastructure and transceiver drivers
 #
 
+ccflags-$(CONFIG_USB_DEBUG)		:= -DDEBUG
+ccflags-$(CONFIG_USB_GADGET_DEBUG)	+= -DDEBUG
+
 # infrastructure
 obj-$(CONFIG_USB_OTG_UTILS)	+= otg.o
 
@@ -12,7 +15,3 @@ obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o
 obj-$(CONFIG_USB_LANGWELL_OTG)	+= langwell_otg.o
 obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o
 obj-$(CONFIG_USB_ULPI)		+= ulpi.o
-
-ccflags-$(CONFIG_USB_DEBUG)	+= -DDEBUG
-ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG
-

drivers/usb/serial/Makefile

@@ -6,10 +6,10 @@
 
 obj-$(CONFIG_USB_SERIAL)			+= usbserial.o
 
-usbserial-obj-$(CONFIG_USB_SERIAL_CONSOLE)	+= console.o
-usbserial-obj-$(CONFIG_USB_EZUSB)		+= ezusb.o
+usbserial-y := usb-serial.o generic.o bus.o
 
-usbserial-objs	:= usb-serial.o generic.o bus.o $(usbserial-obj-y)
+usbserial-$(CONFIG_USB_SERIAL_CONSOLE)	+= console.o
+usbserial-$(CONFIG_USB_EZUSB)		+= ezusb.o
 
 obj-$(CONFIG_USB_SERIAL_AIRCABLE)		+= aircable.o
 obj-$(CONFIG_USB_SERIAL_ARK3116)		+= ark3116.o
@@ -59,6 +59,5 @@ obj-$(CONFIG_USB_SERIAL_TI)			+= ti_usb_3410_5052.o
 obj-$(CONFIG_USB_SERIAL_VISOR)			+= visor.o
 obj-$(CONFIG_USB_SERIAL_WHITEHEAT)		+= whiteheat.o
 obj-$(CONFIG_USB_SERIAL_XIRCOM)			+= keyspan_pda.o
-obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL)	+= vivopay-serial.o
+obj-$(CONFIG_USB_SERIAL_VIVOPAY_SERIAL)		+= vivopay-serial.o
 obj-$(CONFIG_USB_SERIAL_ZIO)			+= zio.o
-

drivers/usb/storage/Makefile

@@ -5,21 +5,21 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-ccflags-y	:= -Idrivers/scsi
+ccflags-y := -Idrivers/scsi
 
 obj-$(CONFIG_USB_UAS)		+= uas.o
 obj-$(CONFIG_USB_STORAGE)	+= usb-storage.o
 
-usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG)	+= debug.o
+usb-storage-y := scsiglue.o protocol.o transport.o usb.o
+usb-storage-y += initializers.o sierra_ms.o option_ms.o
 
-usb-storage-objs :=	scsiglue.o protocol.o transport.o usb.o \
-			initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y)
+usb-storage-$(CONFIG_USB_STORAGE_DEBUG) += debug.o
 
 ifeq ($(CONFIG_USB_LIBUSUAL),)
-	usb-storage-objs	+= usual-tables.o
+	usb-storage-y		+= usual-tables.o
 else
 	obj-$(CONFIG_USB)	+= usb-libusual.o
-	usb-libusual-objs	:= libusual.o usual-tables.o
+	usb-libusual-y		:= libusual.o usual-tables.o
 endif
 
 obj-$(CONFIG_USB_STORAGE_ALAUDA)	+= ums-alauda.o
@@ -34,14 +34,14 @@ obj-$(CONFIG_USB_STORAGE_SDDR09)	+= ums-sddr09.o
 obj-$(CONFIG_USB_STORAGE_SDDR55)	+= ums-sddr55.o
 obj-$(CONFIG_USB_STORAGE_USBAT)		+= ums-usbat.o
 
-ums-alauda-objs		:= alauda.o
-ums-cypress-objs	:= cypress_atacb.o
-ums-datafab-objs	:= datafab.o
-ums-freecom-objs	:= freecom.o
-ums-isd200-objs		:= isd200.o
-ums-jumpshot-objs	:= jumpshot.o
-ums-karma-objs		:= karma.o
-ums-onetouch-objs	:= onetouch.o
-ums-sddr09-objs		:= sddr09.o
-ums-sddr55-objs		:= sddr55.o
-ums-usbat-objs		:= shuttle_usbat.o
+ums-alauda-y		:= alauda.o
+ums-cypress-y		:= cypress_atacb.o
+ums-datafab-y		:= datafab.o
+ums-freecom-y		:= freecom.o
+ums-isd200-y		:= isd200.o
+ums-jumpshot-y		:= jumpshot.o
+ums-karma-y		:= karma.o
+ums-onetouch-y		:= onetouch.o
+ums-sddr09-y		:= sddr09.o
+ums-sddr55-y		:= sddr55.o
+ums-usbat-y		:= shuttle_usbat.o

drivers/usb/wusbcore/Makefile

+ccflags-$(CONFIG_USB_WUSB_CBAF_DEBUG) := -DDEBUG
+
 obj-$(CONFIG_USB_WUSB)		+= wusbcore.o
 obj-$(CONFIG_USB_HWA_HCD)	+= wusb-wa.o
 obj-$(CONFIG_USB_WUSB_CBAF)	+= wusb-cbaf.o
 
 
-wusbcore-objs := 	\
+wusbcore-y :=		\
 	crypto.o	\
 	devconnect.o	\
 	dev-sysfs.o	\
@@ -14,11 +16,10 @@ wusbcore-objs := 	\
 	security.o	\
 	wusbhc.o
 
-wusb-cbaf-objs := cbaf.o
+wusb-cbaf-y := cbaf.o
 
-wusb-wa-objs :=	wa-hc.o		\
-		wa-nep.o	\
-		wa-rpipe.o	\
-		wa-xfer.o
-
-ccflags-$(CONFIG_USB_WUSB_CBAF_DEBUG) := -DDEBUG
+wusb-wa-y :=		\
+	wa-hc.o		\
+	wa-nep.o	\
+	wa-rpipe.o	\
+	wa-xfer.o