arm64: dts: rockchip: Add pwm nodes for rk3328

There are 4 pwm channels built in rk3328 soc, need to configure
the both APB clock and bus clock.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -406,6 +406,51 @@ wdt: watchdog@ff1a0000 {
 		interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	pwm0: pwm@ff1b0000 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0000 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm0_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm1: pwm@ff1b0010 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0010 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm1_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm2: pwm@ff1b0020 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0020 0x0 0x10>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm2_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
+	pwm3: pwm@ff1b0030 {
+		compatible = "rockchip,rk3328-pwm";
+		reg = <0x0 0xff1b0030 0x0 0x10>;
+		interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_PWM>, <&cru PCLK_PWM>;
+		clock-names = "pwm", "pclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwmir_pin>;
+		#pwm-cells = <3>;
+		status = "disabled";
+	};
+
 	thermal-zones {
 		soc_thermal: soc-thermal {
 			polling-delay-passive = <20>;