ARM: dts: vf610: add system reset controller and syscon-reboot

Add the system reset controller (SRC) module and use syscon-reboot
to register a restart handler which restarts the SoC using the
SRC SW_RST bit.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/vf500.dtsi

@@ -130,6 +130,10 @@ &sai2 {
 	interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 };
 
+&src {
+	interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &uart0 {
 	interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 };

arch/arm/boot/dts/vfxxx.dtsi

@@ -43,6 +43,13 @@ sxosc: sxosc {
 		clock-frequency = <32768>;
 	};
 
+	reboot: syscon-reboot {
+		compatible = "syscon-reboot";
+		regmap = <&src>;
+		offset = <0x0>;
+		mask = <0x1000>;
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -318,6 +325,11 @@ usbmisc0: usb@40034800 {
 				clocks = <&clks VF610_CLK_USBC0>;
 				status = "disabled";
 			};
+
+			src: src@4006e000 {
+				compatible = "fsl,vf610-src", "syscon";
+				reg = <0x4006e000 0x1000>;
+			};
 		};
 
 		aips1: aips-bus@40080000 {