Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add driver for Atmel AT42QT2160 Sensor Chip
  Input: max7359 - use threaded IRQs
  Input: add driver for Maxim MAX7359 key switch controller
  Input: add driver for ADP5588 QWERTY I2C Keypad
  Input: add touchscreen driver for MELFAS MCS-5000 controller
  Input: add driver for OpenCores Keyboard Controller
  Input: dm355evm_keys - remove dm355evm_keys_hardirq
  Input: synaptics_i2c - switch to using __cancel_delayed_work()
  Input: ad7879 - add support for AD7889
  Input: atkbd - rely on input core to restore state on resume
  Input: add generic suspend and resume for input devices
  Input: libps2 - additional locking for i8042 ports

drivers/input/input.c

@@ -11,6 +11,7 @@
  */
 
 #include <linux/init.h>
+#include <linux/types.h>
 #include <linux/input.h>
 #include <linux/module.h>
 #include <linux/random.h>
@@ -514,7 +515,7 @@ static void input_disconnect_device(struct input_dev *dev)
 	 * that there are no threads in the middle of input_open_device()
 	 */
 	mutex_lock(&dev->mutex);
-	dev->going_away = 1;
+	dev->going_away = true;
 	mutex_unlock(&dev->mutex);
 
 	spin_lock_irq(&dev->event_lock);
@@ -1259,10 +1260,71 @@ static int input_dev_uevent(struct device *device, struct kobj_uevent_env *env)
 	return 0;
 }
 
+#define INPUT_DO_TOGGLE(dev, type, bits, on)			\
+	do {							\
+		int i;						\
+		if (!test_bit(EV_##type, dev->evbit))		\
+			break;					\
+		for (i = 0; i < type##_MAX; i++) {		\
+			if (!test_bit(i, dev->bits##bit) ||	\
+			    !test_bit(i, dev->bits))		\
+				continue;			\
+			dev->event(dev, EV_##type, i, on);	\
+		}						\
+	} while (0)
+
+static void input_dev_reset(struct input_dev *dev, bool activate)
+{
+	if (!dev->event)
+		return;
+
+	INPUT_DO_TOGGLE(dev, LED, led, activate);
+	INPUT_DO_TOGGLE(dev, SND, snd, activate);
+
+	if (activate && test_bit(EV_REP, dev->evbit)) {
+		dev->event(dev, EV_REP, REP_PERIOD, dev->rep[REP_PERIOD]);
+		dev->event(dev, EV_REP, REP_DELAY, dev->rep[REP_DELAY]);
+	}
+}
+
+#ifdef CONFIG_PM
+static int input_dev_suspend(struct device *dev)
+{
+	struct input_dev *input_dev = to_input_dev(dev);
+
+	mutex_lock(&input_dev->mutex);
+	input_dev_reset(input_dev, false);
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int input_dev_resume(struct device *dev)
+{
+	struct input_dev *input_dev = to_input_dev(dev);
+
+	mutex_lock(&input_dev->mutex);
+	input_dev_reset(input_dev, true);
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static const struct dev_pm_ops input_dev_pm_ops = {
+	.suspend	= input_dev_suspend,
+	.resume		= input_dev_resume,
+	.poweroff	= input_dev_suspend,
+	.restore	= input_dev_resume,
+};
+#endif /* CONFIG_PM */
+
 static struct device_type input_dev_type = {
 	.groups		= input_dev_attr_groups,
 	.release	= input_dev_release,
 	.uevent		= input_dev_uevent,
+#ifdef CONFIG_PM
+	.pm		= &input_dev_pm_ops,
+#endif
 };
 
 static char *input_devnode(struct device *dev, mode_t *mode)

drivers/input/keyboard/Kconfig

@@ -24,6 +24,16 @@ config KEYBOARD_AAED2000
 	  To compile this driver as a module, choose M here: the
 	  module will be called aaed2000_kbd.
 
+config KEYBOARD_ADP5588
+	tristate "ADP5588 I2C QWERTY Keypad and IO Expander"
+	depends on I2C
+	help
+	  Say Y here if you want to use a ADP5588 attached to your
+	  system I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called adp5588-keys.
+
 config KEYBOARD_AMIGA
 	tristate "Amiga keyboard"
 	depends on AMIGA
@@ -104,6 +114,16 @@ config KEYBOARD_ATKBD_RDI_KEYCODES
 	  right-hand column will be interpreted as the key shown in the
 	  left-hand column.
 
+config QT2160
+	tristate "Atmel AT42QT2160 Touch Sensor Chip"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for Atmel AT42QT2160 Touch
+	  Sensor chip as a keyboard input.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called qt2160.
+
 config KEYBOARD_BFIN
 	tristate "Blackfin BF54x keypad support"
 	depends on (BF54x && !BF544)
@@ -251,6 +271,17 @@ config KEYBOARD_MAPLE
 	  To compile this driver as a module, choose M here: the
 	  module will be called maple_keyb.
 
+config KEYBOARD_MAX7359
+	tristate "Maxim MAX7359 Key Switch Controller"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Maxim MAX7359 Key
+	  Switch Controller chip. This providers microprocessors with
+	  management of up to 64 key switches
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called max7359_keypad.
+
 config KEYBOARD_NEWTON
 	tristate "Newton keyboard"
 	select SERIO
@@ -260,6 +291,15 @@ config KEYBOARD_NEWTON
 	  To compile this driver as a module, choose M here: the
 	  module will be called newtonkbd.
 
+config KEYBOARD_OPENCORES
+	tristate "OpenCores Keyboard Controller"
+	help
+	  Say Y here if you want to use the OpenCores Keyboard Controller
+	  http://www.opencores.org/project,keyboardcontroller
+
+	  To compile this driver as a module, choose M here; the
+	  module will be called opencores-kbd.
+
 config KEYBOARD_PXA27x
 	tristate "PXA27x/PXA3xx keypad support"
 	depends on PXA27x || PXA3xx

drivers/input/keyboard/Makefile

@@ -5,6 +5,7 @@
 # Each configuration option enables a list of files.
 
 obj-$(CONFIG_KEYBOARD_AAED2000)		+= aaed2000_kbd.o
+obj-$(CONFIG_KEYBOARD_ADP5588)		+= adp5588-keys.o
 obj-$(CONFIG_KEYBOARD_AMIGA)		+= amikbd.o
 obj-$(CONFIG_KEYBOARD_ATARI)		+= atakbd.o
 obj-$(CONFIG_KEYBOARD_ATKBD)		+= atkbd.o
@@ -21,10 +22,13 @@ obj-$(CONFIG_KEYBOARD_LM8323)		+= lm8323.o
 obj-$(CONFIG_KEYBOARD_LOCOMO)		+= locomokbd.o
 obj-$(CONFIG_KEYBOARD_MAPLE)		+= maple_keyb.o
 obj-$(CONFIG_KEYBOARD_MATRIX)		+= matrix_keypad.o
+obj-$(CONFIG_KEYBOARD_MAX7359)		+= max7359_keypad.o
 obj-$(CONFIG_KEYBOARD_NEWTON)		+= newtonkbd.o
 obj-$(CONFIG_KEYBOARD_OMAP)		+= omap-keypad.o
+obj-$(CONFIG_KEYBOARD_OPENCORES)	+= opencores-kbd.o
 obj-$(CONFIG_KEYBOARD_PXA27x)		+= pxa27x_keypad.o
 obj-$(CONFIG_KEYBOARD_PXA930_ROTARY)	+= pxa930_rotary.o
+obj-$(CONFIG_KEYBOARD_QT2160)		+= qt2160.o
 obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
 obj-$(CONFIG_KEYBOARD_SPITZ)		+= spitzkbd.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o

drivers/input/keyboard/adp5588-keys.c

+/*
+ * File: drivers/input/keyboard/adp5588_keys.c
+ * Description:  keypad driver for ADP5588 I2C QWERTY Keypad and IO Expander
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * Copyright (C) 2008-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+
+#include <linux/i2c/adp5588.h>
+
+ /* Configuration Register1 */
+#define AUTO_INC	(1 << 7)
+#define GPIEM_CFG	(1 << 6)
+#define OVR_FLOW_M	(1 << 5)
+#define INT_CFG		(1 << 4)
+#define OVR_FLOW_IEN	(1 << 3)
+#define K_LCK_IM	(1 << 2)
+#define GPI_IEN		(1 << 1)
+#define KE_IEN		(1 << 0)
+
+/* Interrupt Status Register */
+#define CMP2_INT	(1 << 5)
+#define CMP1_INT	(1 << 4)
+#define OVR_FLOW_INT	(1 << 3)
+#define K_LCK_INT	(1 << 2)
+#define GPI_INT		(1 << 1)
+#define KE_INT		(1 << 0)
+
+/* Key Lock and Event Counter Register */
+#define K_LCK_EN	(1 << 6)
+#define LCK21		0x30
+#define KEC		0xF
+
+/* Key Event Register xy */
+#define KEY_EV_PRESSED		(1 << 7)
+#define KEY_EV_MASK		(0x7F)
+
+#define KP_SEL(x)		(0xFFFF >> (16 - x))	/* 2^x-1 */
+
+#define KEYP_MAX_EVENT		10
+
+/*
+ * Early pre 4.0 Silicon required to delay readout by at least 25ms,
+ * since the Event Counter Register updated 25ms after the interrupt
+ * asserted.
+ */
+#define WA_DELAYED_READOUT_REVID(rev)		((rev) < 4)
+
+struct adp5588_kpad {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct delayed_work work;
+	unsigned long delay;
+	unsigned short keycode[ADP5588_KEYMAPSIZE];
+};
+
+static int adp5588_read(struct i2c_client *client, u8 reg)
+{
+	int ret = i2c_smbus_read_byte_data(client, reg);
+
+	if (ret < 0)
+		dev_err(&client->dev, "Read Error\n");
+
+	return ret;
+}
+
+static int adp5588_write(struct i2c_client *client, u8 reg, u8 val)
+{
+	return i2c_smbus_write_byte_data(client, reg, val);
+}
+
+static void adp5588_work(struct work_struct *work)
+{
+	struct adp5588_kpad *kpad = container_of(work,
+						struct adp5588_kpad, work.work);
+	struct i2c_client *client = kpad->client;
+	int i, key, status, ev_cnt;
+
+	status = adp5588_read(client, INT_STAT);
+
+	if (status & OVR_FLOW_INT)	/* Unlikely and should never happen */
+		dev_err(&client->dev, "Event Overflow Error\n");
+
+	if (status & KE_INT) {
+		ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC;
+		if (ev_cnt) {
+			for (i = 0; i < ev_cnt; i++) {
+				key = adp5588_read(client, Key_EVENTA + i);
+				input_report_key(kpad->input,
+					kpad->keycode[(key & KEY_EV_MASK) - 1],
+					key & KEY_EV_PRESSED);
+			}
+			input_sync(kpad->input);
+		}
+	}
+	adp5588_write(client, INT_STAT, status); /* Status is W1C */
+}
+
+static irqreturn_t adp5588_irq(int irq, void *handle)
+{
+	struct adp5588_kpad *kpad = handle;
+
+	/*
+	 * use keventd context to read the event fifo registers
+	 * Schedule readout at least 25ms after notification for
+	 * REVID < 4
+	 */
+
+	schedule_delayed_work(&kpad->work, kpad->delay);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit adp5588_setup(struct i2c_client *client)
+{
+	struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+	int i, ret;
+
+	ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows));
+	ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF);
+	ret |= adp5588_write(client, KP_GPIO3, KP_SEL(pdata->cols) >> 8);
+
+	if (pdata->en_keylock) {
+		ret |= adp5588_write(client, UNLOCK1, pdata->unlock_key1);
+		ret |= adp5588_write(client, UNLOCK2, pdata->unlock_key2);
+		ret |= adp5588_write(client, KEY_LCK_EC_STAT, K_LCK_EN);
+	}
+
+	for (i = 0; i < KEYP_MAX_EVENT; i++)
+		ret |= adp5588_read(client, Key_EVENTA);
+
+	ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT |
+					OVR_FLOW_INT | K_LCK_INT |
+					GPI_INT | KE_INT); /* Status is W1C */
+
+	ret |= adp5588_write(client, CFG, INT_CFG | OVR_FLOW_IEN | KE_IEN);
+
+	if (ret < 0) {
+		dev_err(&client->dev, "Write Error\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __devinit adp5588_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct adp5588_kpad *kpad;
+	struct adp5588_kpad_platform_data *pdata = client->dev.platform_data;
+	struct input_dev *input;
+	unsigned int revid;
+	int ret, i;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter,
+					I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "SMBUS Byte Data not Supported\n");
+		return -EIO;
+	}
+
+	if (!pdata) {
+		dev_err(&client->dev, "no platform data?\n");
+		return -EINVAL;
+	}
+
+	if (!pdata->rows || !pdata->cols || !pdata->keymap) {
+		dev_err(&client->dev, "no rows, cols or keymap from pdata\n");
+		return -EINVAL;
+	}
+
+	if (pdata->keymapsize != ADP5588_KEYMAPSIZE) {
+		dev_err(&client->dev, "invalid keymapsize\n");
+		return -EINVAL;
+	}
+
+	if (!client->irq) {
+		dev_err(&client->dev, "no IRQ?\n");
+		return -EINVAL;
+	}
+
+	kpad = kzalloc(sizeof(*kpad), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!kpad || !input) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	kpad->client = client;
+	kpad->input = input;
+	INIT_DELAYED_WORK(&kpad->work, adp5588_work);
+
+	ret = adp5588_read(client, DEV_ID);
+	if (ret < 0) {
+		error = ret;
+		goto err_free_mem;
+	}
+
+	revid = (u8) ret & ADP5588_DEVICE_ID_MASK;
+	if (WA_DELAYED_READOUT_REVID(revid))
+		kpad->delay = msecs_to_jiffies(30);
+
+	input->name = client->name;
+	input->phys = "adp5588-keys/input0";
+	input->dev.parent = &client->dev;
+
+	input_set_drvdata(input, kpad);
+
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = revid;
+
+	input->keycodesize = sizeof(kpad->keycode[0]);
+	input->keycodemax = pdata->keymapsize;
+	input->keycode = kpad->keycode;
+
+	memcpy(kpad->keycode, pdata->keymap,
+		pdata->keymapsize * input->keycodesize);
+
+	/* setup input device */
+	__set_bit(EV_KEY, input->evbit);
+
+	if (pdata->repeat)
+		__set_bit(EV_REP, input->evbit);
+
+	for (i = 0; i < input->keycodemax; i++)
+		__set_bit(kpad->keycode[i] & KEY_MAX, input->keybit);
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&client->dev, "unable to register input device\n");
+		goto err_free_mem;
+	}
+
+	error = request_irq(client->irq, adp5588_irq,
+			    IRQF_TRIGGER_FALLING | IRQF_DISABLED,
+			    client->dev.driver->name, kpad);
+	if (error) {
+		dev_err(&client->dev, "irq %d busy?\n", client->irq);
+		goto err_unreg_dev;
+	}
+
+	error = adp5588_setup(client);
+	if (error)
+		goto err_free_irq;
+
+	device_init_wakeup(&client->dev, 1);
+	i2c_set_clientdata(client, kpad);
+
+	dev_info(&client->dev, "Rev.%d keypad, irq %d\n", revid, client->irq);
+	return 0;
+
+ err_free_irq:
+	free_irq(client->irq, kpad);
+ err_unreg_dev:
+	input_unregister_device(input);
+	input = NULL;
+ err_free_mem:
+	input_free_device(input);
+	kfree(kpad);
+
+	return error;
+}
+
+static int __devexit adp5588_remove(struct i2c_client *client)
+{
+	struct adp5588_kpad *kpad = i2c_get_clientdata(client);
+
+	adp5588_write(client, CFG, 0);
+	free_irq(client->irq, kpad);
+	cancel_delayed_work_sync(&kpad->work);
+	input_unregister_device(kpad->input);
+	i2c_set_clientdata(client, NULL);
+	kfree(kpad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp5588_suspend(struct device *dev)
+{
+	struct adp5588_kpad *kpad = dev_get_drvdata(dev);
+	struct i2c_client *client = kpad->client;
+
+	disable_irq(client->irq);
+	cancel_delayed_work_sync(&kpad->work);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int adp5588_resume(struct device *dev)
+{
+	struct adp5588_kpad *kpad = dev_get_drvdata(dev);
+	struct i2c_client *client = kpad->client;
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static struct dev_pm_ops adp5588_dev_pm_ops = {
+	.suspend = adp5588_suspend,
+	.resume  = adp5588_resume,
+};
+#endif
+
+static const struct i2c_device_id adp5588_id[] = {
+	{ KBUILD_MODNAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adp5588_id);
+
+static struct i2c_driver adp5588_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+#ifdef CONFIG_PM
+		.pm   = &adp5588_dev_pm_ops,
+#endif
+	},
+	.probe    = adp5588_probe,
+	.remove   = __devexit_p(adp5588_remove),
+	.id_table = adp5588_id,
+};
+
+static int __init adp5588_init(void)
+{
+	return i2c_add_driver(&adp5588_driver);
+}
+module_init(adp5588_init);
+
+static void __exit adp5588_exit(void)
+{
+	i2c_del_driver(&adp5588_driver);
+}
+module_exit(adp5588_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP5588 Keypad driver");
+MODULE_ALIAS("platform:adp5588-keys");

drivers/input/keyboard/atkbd.c

@@ -773,23 +773,6 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra
 static int atkbd_activate(struct atkbd *atkbd)
 {
 	struct ps2dev *ps2dev = &atkbd->ps2dev;
-	unsigned char param[1];
-
-/*
- * Set the LEDs to a defined state.
- */
-
-	param[0] = 0;
-	if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS))
-		return -1;
-
-/*
- * Set autorepeat to fastest possible.
- */
-
-	param[0] = 0;
-	if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP))
-		return -1;
 
 /*
  * Enable the keyboard to receive keystrokes.
@@ -1158,14 +1141,6 @@ static int atkbd_reconnect(struct serio *serio)
 			return -1;
 
 		atkbd_activate(atkbd);
-
-/*
- * Restore repeat rate and LEDs (that were reset by atkbd_activate)
- * to pre-resume state
- */
-		if (!atkbd->softrepeat)
-			atkbd_set_repeat_rate(atkbd);
-		atkbd_set_leds(atkbd);
 	}
 
 	atkbd_enable(atkbd);

drivers/input/keyboard/max7359_keypad.c

+/*
+ * max7359_keypad.c - MAX7359 Key Switch Controller Driver
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ * Kim Kyuwon <q1.kim@samsung.com>
+ *
+ * Based on pxa27x_keypad.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5456
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+
+#define MAX7359_MAX_KEY_ROWS	8
+#define MAX7359_MAX_KEY_COLS	8
+#define MAX7359_MAX_KEY_NUM	(MAX7359_MAX_KEY_ROWS * MAX7359_MAX_KEY_COLS)
+#define MAX7359_ROW_SHIFT	3
+
+/*
+ * MAX7359 registers
+ */
+#define MAX7359_REG_KEYFIFO	0x00
+#define MAX7359_REG_CONFIG	0x01
+#define MAX7359_REG_DEBOUNCE	0x02
+#define MAX7359_REG_INTERRUPT	0x03
+#define MAX7359_REG_PORTS	0x04
+#define MAX7359_REG_KEYREP	0x05
+#define MAX7359_REG_SLEEP	0x06
+
+/*
+ * Configuration register bits
+ */
+#define MAX7359_CFG_SLEEP	(1 << 7)
+#define MAX7359_CFG_INTERRUPT	(1 << 5)
+#define MAX7359_CFG_KEY_RELEASE	(1 << 3)
+#define MAX7359_CFG_WAKEUP	(1 << 1)
+#define MAX7359_CFG_TIMEOUT	(1 << 0)
+
+/*
+ * Autosleep register values (ms)
+ */
+#define MAX7359_AUTOSLEEP_8192	0x01
+#define MAX7359_AUTOSLEEP_4096	0x02
+#define MAX7359_AUTOSLEEP_2048	0x03
+#define MAX7359_AUTOSLEEP_1024	0x04
+#define MAX7359_AUTOSLEEP_512	0x05
+#define MAX7359_AUTOSLEEP_256	0x06
+
+struct max7359_keypad {
+	/* matrix key code map */
+	unsigned short keycodes[MAX7359_MAX_KEY_NUM];
+
+	struct input_dev *input_dev;
+	struct i2c_client *client;
+};
+
+static int max7359_write_reg(struct i2c_client *client, u8 reg, u8 val)
+{
+	int ret = i2c_smbus_write_byte_data(client, reg, val);
+
+	if (ret < 0)
+		dev_err(&client->dev, "%s: reg 0x%x, val 0x%x, err %d\n",
+			__func__, reg, val, ret);
+	return ret;
+}
+
+static int max7359_read_reg(struct i2c_client *client, int reg)
+{
+	int ret = i2c_smbus_read_byte_data(client, reg);
+
+	if (ret < 0)
+		dev_err(&client->dev, "%s: reg 0x%x, err %d\n",
+			__func__, reg, ret);
+	return ret;
+}
+
+static void max7359_build_keycode(struct max7359_keypad *keypad,
+				const struct matrix_keymap_data *keymap_data)
+{
+	struct input_dev *input_dev = keypad->input_dev;
+	int i;
+
+	for (i = 0; i < keymap_data->keymap_size; i++) {
+		unsigned int key = keymap_data->keymap[i];
+		unsigned int row = KEY_ROW(key);
+		unsigned int col = KEY_COL(key);
+		unsigned int scancode = MATRIX_SCAN_CODE(row, col,
+						MAX7359_ROW_SHIFT);
+		unsigned short keycode = KEY_VAL(key);
+
+		keypad->keycodes[scancode] = keycode;
+		__set_bit(keycode, input_dev->keybit);
+	}
+	__clear_bit(KEY_RESERVED, input_dev->keybit);
+}
+
+/* runs in an IRQ thread -- can (and will!) sleep */
+static irqreturn_t max7359_interrupt(int irq, void *dev_id)
+{
+	struct max7359_keypad *keypad = dev_id;
+	struct input_dev *input_dev = keypad->input_dev;
+	int val, row, col, release, code;
+
+	val = max7359_read_reg(keypad->client, MAX7359_REG_KEYFIFO);
+	row = val & 0x7;
+	col = (val >> 3) & 0x7;
+	release = val & 0x40;
+
+	code = MATRIX_SCAN_CODE(row, col, MAX7359_ROW_SHIFT);
+
+	dev_dbg(&keypad->client->dev,
+		"key[%d:%d] %s\n", row, col, release ? "release" : "press");
+
+	input_event(input_dev, EV_MSC, MSC_SCAN, code);
+	input_report_key(input_dev, keypad->keycodes[code], !release);
+	input_sync(input_dev);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Let MAX7359 fall into a deep sleep:
+ * If no keys are pressed, enter sleep mode for 8192 ms. And if any
+ * key is pressed, the MAX7359 returns to normal operating mode.
+ */
+static inline void max7359_fall_deepsleep(struct i2c_client *client)
+{
+	max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_8192);
+}
+
+/*
+ * Let MAX7359 take a catnap:
+ * Autosleep just for 256 ms.
+ */
+static inline void max7359_take_catnap(struct i2c_client *client)
+{
+	max7359_write_reg(client, MAX7359_REG_SLEEP, MAX7359_AUTOSLEEP_256);
+}
+
+static int max7359_open(struct input_dev *dev)
+{
+	struct max7359_keypad *keypad = input_get_drvdata(dev);
+
+	max7359_take_catnap(keypad->client);
+
+	return 0;
+}
+
+static void max7359_close(struct input_dev *dev)
+{
+	struct max7359_keypad *keypad = input_get_drvdata(dev);
+
+	max7359_fall_deepsleep(keypad->client);
+}
+
+static void max7359_initialize(struct i2c_client *client)
+{
+	max7359_write_reg(client, MAX7359_REG_CONFIG,
+		MAX7359_CFG_INTERRUPT | /* Irq clears after host read */
+		MAX7359_CFG_KEY_RELEASE | /* Key release enable */
+		MAX7359_CFG_WAKEUP); /* Key press wakeup enable */
+
+	/* Full key-scan functionality */
+	max7359_write_reg(client, MAX7359_REG_DEBOUNCE, 0x1F);
+
+	/* nINT asserts every debounce cycles */
+	max7359_write_reg(client, MAX7359_REG_INTERRUPT, 0x01);
+
+	max7359_fall_deepsleep(client);
+}
+
+static int __devinit max7359_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	const struct matrix_keymap_data *keymap_data = client->dev.platform_data;
+	struct max7359_keypad *keypad;
+	struct input_dev *input_dev;
+	int ret;
+	int error;
+
+	if (!client->irq) {
+		dev_err(&client->dev, "The irq number should not be zero\n");
+		return -EINVAL;
+	}
+
+	/* Detect MAX7359: The initial Keys FIFO value is '0x3F' */
+	ret = max7359_read_reg(client, MAX7359_REG_KEYFIFO);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed to detect device\n");
+		return -ENODEV;
+	}
+
+	dev_dbg(&client->dev, "keys FIFO is 0x%02x\n", ret);
+
+	keypad = kzalloc(sizeof(struct max7359_keypad), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!keypad || !input_dev) {
+		dev_err(&client->dev, "failed to allocate memory\n");
+		error = -ENOMEM;
+		goto failed_free_mem;
+	}
+
+	keypad->client = client;
+	keypad->input_dev = input_dev;
+
+	input_dev->name = client->name;
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->open = max7359_open;
+	input_dev->close = max7359_close;
+	input_dev->dev.parent = &client->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+	input_dev->keycodesize = sizeof(keypad->keycodes[0]);
+	input_dev->keycodemax = ARRAY_SIZE(keypad->keycodes);
+	input_dev->keycode = keypad->keycodes;
+
+	input_set_capability(input_dev, EV_MSC, MSC_SCAN);
+	input_set_drvdata(input_dev, keypad);
+
+	max7359_build_keycode(keypad, keymap_data);
+
+	error = request_threaded_irq(client->irq, NULL, max7359_interrupt,
+				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				     client->name, keypad);
+	if (error) {
+		dev_err(&client->dev, "failed to register interrupt\n");
+		goto failed_free_mem;
+	}
+
+	/* Register the input device */
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&client->dev, "failed to register input device\n");
+		goto failed_free_irq;
+	}
+
+	/* Initialize MAX7359 */
+	max7359_initialize(client);
+
+	i2c_set_clientdata(client, keypad);
+	device_init_wakeup(&client->dev, 1);
+
+	return 0;
+
+failed_free_irq:
+	free_irq(client->irq, keypad);
+failed_free_mem:
+	input_free_device(input_dev);
+	kfree(keypad);
+	return error;
+}
+
+static int __devexit max7359_remove(struct i2c_client *client)
+{
+	struct max7359_keypad *keypad = i2c_get_clientdata(client);
+
+	free_irq(client->irq, keypad);
+	input_unregister_device(keypad->input_dev);
+	i2c_set_clientdata(client, NULL);
+	kfree(keypad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int max7359_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	max7359_fall_deepsleep(client);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int max7359_resume(struct i2c_client *client)
+{
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+
+	/* Restore the default setting */
+	max7359_take_catnap(client);
+
+	return 0;
+}
+#else
+#define max7359_suspend	NULL
+#define max7359_resume	NULL
+#endif
+
+static const struct i2c_device_id max7359_ids[] = {
+	{ "max7359", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max7359_ids);
+
+static struct i2c_driver max7359_i2c_driver = {
+	.driver = {
+		.name = "max7359",
+	},
+	.probe		= max7359_probe,
+	.remove		= __devexit_p(max7359_remove),
+	.suspend	= max7359_suspend,
+	.resume		= max7359_resume,
+	.id_table	= max7359_ids,
+};
+
+static int __init max7359_init(void)
+{
+	return i2c_add_driver(&max7359_i2c_driver);
+}
+module_init(max7359_init);
+
+static void __exit max7359_exit(void)
+{
+	i2c_del_driver(&max7359_i2c_driver);
+}
+module_exit(max7359_exit);
+
+MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>");
+MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver");
+MODULE_LICENSE("GPL v2");

drivers/input/keyboard/opencores-kbd.c

+/*
+ * OpenCores Keyboard Controller Driver
+ * http://www.opencores.org/project,keyboardcontroller
+ *
+ * Copyright 2007-2009 HV Sistemas S.L.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+struct opencores_kbd {
+	struct input_dev *input;
+	struct resource *addr_res;
+	void __iomem *addr;
+	int irq;
+	unsigned short keycodes[128];
+};
+
+static irqreturn_t opencores_kbd_isr(int irq, void *dev_id)
+{
+	struct opencores_kbd *opencores_kbd = dev_id;
+	struct input_dev *input = opencores_kbd->input;
+	unsigned char c;
+
+	c = readb(opencores_kbd->addr);
+	input_report_key(input, c & 0x7f, c & 0x80 ? 0 : 1);
+	input_sync(input);
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit opencores_kbd_probe(struct platform_device *pdev)
+{
+	struct input_dev *input;
+	struct opencores_kbd *opencores_kbd;
+	struct resource *res;
+	int irq, i, error;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "missing board memory resource\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "missing board IRQ resource\n");
+		return -EINVAL;
+	}
+
+	opencores_kbd = kzalloc(sizeof(*opencores_kbd), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!opencores_kbd || !input) {
+		dev_err(&pdev->dev, "failed to allocate device structures\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	opencores_kbd->addr_res = res;
+	res = request_mem_region(res->start, resource_size(res), pdev->name);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to request I/O memory\n");
+		error = -EBUSY;
+		goto err_free_mem;
+	}
+
+	opencores_kbd->addr = ioremap(res->start, resource_size(res));
+	if (!opencores_kbd->addr) {
+		dev_err(&pdev->dev, "failed to remap I/O memory\n");
+		error = -ENXIO;
+		goto err_rel_mem;
+	}
+
+	opencores_kbd->input = input;
+	opencores_kbd->irq = irq;
+
+	input->name = pdev->name;
+	input->phys = "opencores-kbd/input0";
+	input->dev.parent = &pdev->dev;
+
+	input_set_drvdata(input, opencores_kbd);
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	input->keycode = opencores_kbd->keycodes;
+	input->keycodesize = sizeof(opencores_kbd->keycodes[0]);
+	input->keycodemax = ARRAY_SIZE(opencores_kbd->keycodes);
+
+	__set_bit(EV_KEY, input->evbit);
+
+	for (i = 0; i < ARRAY_SIZE(opencores_kbd->keycodes); i++) {
+		/*
+		 * OpenCores controller happens to have scancodes match
+		 * our KEY_* definitions.
+		 */
+		opencores_kbd->keycodes[i] = i;
+		__set_bit(opencores_kbd->keycodes[i], input->keybit);
+	}
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	error = request_irq(irq, &opencores_kbd_isr,
+			    IRQF_TRIGGER_RISING, pdev->name, opencores_kbd);
+	if (error) {
+		dev_err(&pdev->dev, "unable to claim irq %d\n", irq);
+		goto err_unmap_mem;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "unable to register input device\n");
+		goto err_free_irq;
+	}
+
+	platform_set_drvdata(pdev, opencores_kbd);
+
+	return 0;
+
+ err_free_irq:
+	free_irq(irq, opencores_kbd);
+ err_unmap_mem:
+	iounmap(opencores_kbd->addr);
+ err_rel_mem:
+	release_mem_region(res->start, resource_size(res));
+ err_free_mem:
+	input_free_device(input);
+	kfree(opencores_kbd);
+
+	return error;
+}
+
+static int __devexit opencores_kbd_remove(struct platform_device *pdev)
+{
+	struct opencores_kbd *opencores_kbd = platform_get_drvdata(pdev);
+
+	free_irq(opencores_kbd->irq, opencores_kbd);
+
+	iounmap(opencores_kbd->addr);
+	release_mem_region(opencores_kbd->addr_res->start,
+		resource_size(opencores_kbd->addr_res));
+	input_unregister_device(opencores_kbd->input);
+	kfree(opencores_kbd);
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver opencores_kbd_device_driver = {
+	.probe    = opencores_kbd_probe,
+	.remove   = __devexit_p(opencores_kbd_remove),
+	.driver   = {
+		.name = "opencores-kbd",
+	},
+};
+
+static int __init opencores_kbd_init(void)
+{
+	return platform_driver_register(&opencores_kbd_device_driver);
+}
+module_init(opencores_kbd_init);
+
+static void __exit opencores_kbd_exit(void)
+{
+	platform_driver_unregister(&opencores_kbd_device_driver);
+}
+module_exit(opencores_kbd_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Javier Herrero <jherrero@hvsistemas.es>");
+MODULE_DESCRIPTION("Keyboard driver for OpenCores Keyboard Controller");

drivers/input/keyboard/qt2160.c

+/*
+ *  qt2160.c - Atmel AT42QT2160 Touch Sense Controller
+ *
+ *  Copyright (C) 2009 Raphael Derosso Pereira <raphaelpereira@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+
+#define QT2160_VALID_CHIPID  0x11
+
+#define QT2160_CMD_CHIPID     0
+#define QT2160_CMD_CODEVER    1
+#define QT2160_CMD_GSTAT      2
+#define QT2160_CMD_KEYS3      3
+#define QT2160_CMD_KEYS4      4
+#define QT2160_CMD_SLIDE      5
+#define QT2160_CMD_GPIOS      6
+#define QT2160_CMD_SUBVER     7
+#define QT2160_CMD_CALIBRATE  10
+
+#define QT2160_CYCLE_INTERVAL	(2*HZ)
+
+static unsigned char qt2160_key2code[] = {
+	KEY_0, KEY_1, KEY_2, KEY_3,
+	KEY_4, KEY_5, KEY_6, KEY_7,
+	KEY_8, KEY_9, KEY_A, KEY_B,
+	KEY_C, KEY_D, KEY_E, KEY_F,
+};
+
+struct qt2160_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct delayed_work dwork;
+	spinlock_t lock;        /* Protects canceling/rescheduling of dwork */
+	unsigned short keycodes[ARRAY_SIZE(qt2160_key2code)];
+	u16 key_matrix;
+};
+
+static int qt2160_read_block(struct i2c_client *client,
+			     u8 inireg, u8 *buffer, unsigned int count)
+{
+	int error, idx = 0;
+
+	/*
+	 * Can't use SMBus block data read. Check for I2C functionality to speed
+	 * things up whenever possible. Otherwise we will be forced to read
+	 * sequentially.
+	 */
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C))	{
+
+		error = i2c_smbus_write_byte(client, inireg + idx);
+		if (error) {
+			dev_err(&client->dev,
+				"couldn't send request. Returned %d\n", error);
+			return error;
+		}
+
+		error = i2c_master_recv(client, buffer, count);
+		if (error != count) {
+			dev_err(&client->dev,
+				"couldn't read registers. Returned %d bytes\n", error);
+			return error;
+		}
+	} else {
+
+		while (count--) {
+			int data;
+
+			error = i2c_smbus_write_byte(client, inireg + idx);
+			if (error) {
+				dev_err(&client->dev,
+					"couldn't send request. Returned %d\n", error);
+				return error;
+			}
+
+			data = i2c_smbus_read_byte(client);
+			if (data < 0) {
+				dev_err(&client->dev,
+					"couldn't read register. Returned %d\n", data);
+				return data;
+			}
+
+			buffer[idx++] = data;
+		}
+	}
+
+	return 0;
+}
+
+static int qt2160_get_key_matrix(struct qt2160_data *qt2160)
+{
+	struct i2c_client *client = qt2160->client;
+	struct input_dev *input = qt2160->input;
+	u8 regs[6];
+	u16 old_matrix, new_matrix;
+	int ret, i, mask;
+
+	dev_dbg(&client->dev, "requesting keys...\n");
+
+	/*
+	 * Read all registers from General Status Register
+	 * to GPIOs register
+	 */
+	ret = qt2160_read_block(client, QT2160_CMD_GSTAT, regs, 6);
+	if (ret) {
+		dev_err(&client->dev,
+			"could not perform chip read.\n");
+		return ret;
+	}
+
+	old_matrix = qt2160->key_matrix;
+	qt2160->key_matrix = new_matrix = (regs[2] << 8) | regs[1];
+
+	mask = 0x01;
+	for (i = 0; i < 16; ++i, mask <<= 1) {
+		int keyval = new_matrix & mask;
+
+		if ((old_matrix & mask) != keyval) {
+			input_report_key(input, qt2160->keycodes[i], keyval);
+			dev_dbg(&client->dev, "key %d %s\n",
+				i, keyval ? "pressed" : "released");
+		}
+	}
+
+	input_sync(input);
+
+	return 0;
+}
+
+static irqreturn_t qt2160_irq(int irq, void *_qt2160)
+{
+	struct qt2160_data *qt2160 = _qt2160;
+	unsigned long flags;
+
+	spin_lock_irqsave(&qt2160->lock, flags);
+
+	__cancel_delayed_work(&qt2160->dwork);
+	schedule_delayed_work(&qt2160->dwork, 0);
+
+	spin_unlock_irqrestore(&qt2160->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static void qt2160_schedule_read(struct qt2160_data *qt2160)
+{
+	spin_lock_irq(&qt2160->lock);
+	schedule_delayed_work(&qt2160->dwork, QT2160_CYCLE_INTERVAL);
+	spin_unlock_irq(&qt2160->lock);
+}
+
+static void qt2160_worker(struct work_struct *work)
+{
+	struct qt2160_data *qt2160 =
+		container_of(work, struct qt2160_data, dwork.work);
+
+	dev_dbg(&qt2160->client->dev, "worker\n");
+
+	qt2160_get_key_matrix(qt2160);
+
+	/* Avoid device lock up by checking every so often */
+	qt2160_schedule_read(qt2160);
+}
+
+static int __devinit qt2160_read(struct i2c_client *client, u8 reg)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte(client, reg);
+	if (ret) {
+		dev_err(&client->dev,
+			"couldn't send request. Returned %d\n", ret);
+		return ret;
+	}
+
+	ret = i2c_smbus_read_byte(client);
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"couldn't read register. Returned %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int __devinit qt2160_write(struct i2c_client *client, u8 reg, u8 data)
+{
+	int error;
+
+	error = i2c_smbus_write_byte(client, reg);
+	if (error) {
+		dev_err(&client->dev,
+			"couldn't send request. Returned %d\n", error);
+		return error;
+	}
+
+	error = i2c_smbus_write_byte(client, data);
+	if (error) {
+		dev_err(&client->dev,
+			"couldn't write data. Returned %d\n", error);
+		return error;
+	}
+
+	return error;
+}
+
+
+static bool __devinit qt2160_identify(struct i2c_client *client)
+{
+	int id, ver, rev;
+
+	/* Read Chid ID to check if chip is valid */
+	id = qt2160_read(client, QT2160_CMD_CHIPID);
+	if (id != QT2160_VALID_CHIPID) {
+		dev_err(&client->dev, "ID %d not supported\n", id);
+		return false;
+	}
+
+	/* Read chip firmware version */
+	ver = qt2160_read(client, QT2160_CMD_CODEVER);
+	if (ver < 0) {
+		dev_err(&client->dev, "could not get firmware version\n");
+		return false;
+	}
+
+	/* Read chip firmware revision */
+	rev = qt2160_read(client, QT2160_CMD_SUBVER);
+	if (rev < 0) {
+		dev_err(&client->dev, "could not get firmware revision\n");
+		return false;
+	}
+
+	dev_info(&client->dev, "AT42QT2160 firmware version %d.%d.%d\n",
+			ver >> 4, ver & 0xf, rev);
+
+	return true;
+}
+
+static int __devinit qt2160_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct qt2160_data *qt2160;
+	struct input_dev *input;
+	int i;
+	int error;
+
+	/* Check functionality */
+	error = i2c_check_functionality(client->adapter,
+			I2C_FUNC_SMBUS_BYTE);
+	if (!error) {
+		dev_err(&client->dev, "%s adapter not supported\n",
+				dev_driver_string(&client->adapter->dev));
+		return -ENODEV;
+	}
+
+	if (!qt2160_identify(client))
+		return -ENODEV;
+
+	/* Chip is valid and active. Allocate structure */
+	qt2160 = kzalloc(sizeof(struct qt2160_data), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!qt2160 || !input) {
+		dev_err(&client->dev, "insufficient memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	qt2160->client = client;
+	qt2160->input = input;
+	INIT_DELAYED_WORK(&qt2160->dwork, qt2160_worker);
+	spin_lock_init(&qt2160->lock);
+
+	input->name = "AT42QT2160 Touch Sense Keyboard";
+	input->id.bustype = BUS_I2C;
+
+	input->keycode = qt2160->keycodes;
+	input->keycodesize = sizeof(qt2160->keycodes[0]);
+	input->keycodemax = ARRAY_SIZE(qt2160_key2code);
+
+	__set_bit(EV_KEY, input->evbit);
+	__clear_bit(EV_REP, input->evbit);
+	for (i = 0; i < ARRAY_SIZE(qt2160_key2code); i++) {
+		qt2160->keycodes[i] = qt2160_key2code[i];
+		__set_bit(qt2160_key2code[i], input->keybit);
+	}
+	__clear_bit(KEY_RESERVED, input->keybit);
+
+	/* Calibrate device */
+	error = qt2160_write(client, QT2160_CMD_CALIBRATE, 1);
+	if (error) {
+		dev_err(&client->dev, "failed to calibrate device\n");
+		goto err_free_mem;
+	}
+
+	if (client->irq) {
+		error = request_irq(client->irq, qt2160_irq,
+				    IRQF_TRIGGER_FALLING, "qt2160", qt2160);
+		if (error) {
+			dev_err(&client->dev,
+				"failed to allocate irq %d\n", client->irq);
+			goto err_free_mem;
+		}
+	}
+
+	error = input_register_device(qt2160->input);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to register input device\n");
+		goto err_free_irq;
+	}
+
+	i2c_set_clientdata(client, qt2160);
+	qt2160_schedule_read(qt2160);
+
+	return 0;
+
+err_free_irq:
+	if (client->irq)
+		free_irq(client->irq, qt2160);
+err_free_mem:
+	input_free_device(input);
+	kfree(qt2160);
+	return error;
+}
+
+static int __devexit qt2160_remove(struct i2c_client *client)
+{
+	struct qt2160_data *qt2160 = i2c_get_clientdata(client);
+
+	/* Release IRQ so no queue will be scheduled */
+	if (client->irq)
+		free_irq(client->irq, qt2160);
+
+	cancel_delayed_work_sync(&qt2160->dwork);
+
+	input_unregister_device(qt2160->input);
+	kfree(qt2160);
+
+	i2c_set_clientdata(client, NULL);
+	return 0;
+}
+
+static struct i2c_device_id qt2160_idtable[] = {
+	{ "qt2160", 0, },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, qt2160_idtable);
+
+static struct i2c_driver qt2160_driver = {
+	.driver = {
+		.name	= "qt2160",
+		.owner  = THIS_MODULE,
+	},
+
+	.id_table	= qt2160_idtable,
+	.probe		= qt2160_probe,
+	.remove		= __devexit_p(qt2160_remove),
+};
+
+static int __init qt2160_init(void)
+{
+	return i2c_add_driver(&qt2160_driver);
+}
+module_init(qt2160_init);
+
+static void __exit qt2160_cleanup(void)
+{
+	i2c_del_driver(&qt2160_driver);
+}
+module_exit(qt2160_cleanup);
+
+MODULE_AUTHOR("Raphael Derosso Pereira <raphaelpereira@gmail.com>");
+MODULE_DESCRIPTION("Driver for AT42QT2160 Touch Sensor");
+MODULE_LICENSE("GPL");

drivers/input/misc/dm355evm_keys.c

@@ -96,7 +96,13 @@ static struct {
 	{ 0x3169, KEY_PAUSE, },
 };
 
-/* runs in an IRQ thread -- can (and will!) sleep */
+/*
+ * Because we communicate with the MSP430 using I2C, and all I2C calls
+ * in Linux sleep, we use a threaded IRQ handler.  The IRQ itself is
+ * active low, but we go through the GPIO controller so we can trigger
+ * on falling edges and not worry about enabling/disabling the IRQ in
+ * the keypress handling path.
+ */
 static irqreturn_t dm355evm_keys_irq(int irq, void *_keys)
 {
 	struct dm355evm_keys	*keys = _keys;
@@ -171,18 +177,6 @@ static irqreturn_t dm355evm_keys_irq(int irq, void *_keys)
 	return IRQ_HANDLED;
 }
 
-/*
- * Because we communicate with the MSP430 using I2C, and all I2C calls
- * in Linux sleep, we use a threaded IRQ handler.  The IRQ itself is
- * active low, but we go through the GPIO controller so we can trigger
- * on falling edges and not worry about enabling/disabling the IRQ in
- * the keypress handling path.
- */
-static irqreturn_t dm355evm_keys_hardirq(int irq, void *_keys)
-{
-	return IRQ_WAKE_THREAD;
-}
-
 static int dm355evm_setkeycode(struct input_dev *dev, int index, int keycode)
 {
 	u16		old_keycode;
@@ -257,10 +251,8 @@ static int __devinit dm355evm_keys_probe(struct platform_device *pdev)
 
 	/* REVISIT:  flush the event queue? */
 
-	status = request_threaded_irq(keys->irq,
-			dm355evm_keys_hardirq, dm355evm_keys_irq,
-			IRQF_TRIGGER_FALLING,
-			dev_name(&pdev->dev), keys);
+	status = request_threaded_irq(keys->irq, NULL, dm355evm_keys_irq,
+			IRQF_TRIGGER_FALLING, dev_name(&pdev->dev), keys);
 	if (status < 0)
 		goto fail1;
 

drivers/input/mouse/sentelic.c

@@ -92,7 +92,8 @@ static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val)
 	 */
 	ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE);
 	psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
-	mutex_lock(&ps2dev->cmd_mutex);
+
+	ps2_begin_command(ps2dev);
 
 	if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
 		goto out;
@@ -126,7 +127,7 @@ static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val)
 	rc = 0;
 
  out:
-	mutex_unlock(&ps2dev->cmd_mutex);
+	ps2_end_command(ps2dev);
 	ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
 	psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
 	dev_dbg(&ps2dev->serio->dev, "READ REG: 0x%02x is 0x%02x (rc = %d)\n",
@@ -140,7 +141,7 @@ static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val)
 	unsigned char v;
 	int rc = -1;
 
-	mutex_lock(&ps2dev->cmd_mutex);
+	ps2_begin_command(ps2dev);
 
 	if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
 		goto out;
@@ -179,7 +180,7 @@ static int fsp_reg_write(struct psmouse *psmouse, int reg_addr, int reg_val)
 	rc = 0;
 
  out:
-	mutex_unlock(&ps2dev->cmd_mutex);
+	ps2_end_command(ps2dev);
 	dev_dbg(&ps2dev->serio->dev, "WRITE REG: 0x%02x to 0x%02x (rc = %d)\n",
 		reg_addr, reg_val, rc);
 	return rc;
@@ -214,7 +215,8 @@ static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val)
 
 	ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE);
 	psmouse_set_state(psmouse, PSMOUSE_CMD_MODE);
-	mutex_lock(&ps2dev->cmd_mutex);
+
+	ps2_begin_command(ps2dev);
 
 	if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
 		goto out;
@@ -236,7 +238,7 @@ static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val)
 	rc = 0;
 
  out:
-	mutex_unlock(&ps2dev->cmd_mutex);
+	ps2_end_command(ps2dev);
 	ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE);
 	psmouse_set_state(psmouse, PSMOUSE_ACTIVATED);
 	dev_dbg(&ps2dev->serio->dev, "READ PAGE REG: 0x%02x (rc = %d)\n",
@@ -250,7 +252,7 @@ static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val)
 	unsigned char v;
 	int rc = -1;
 
-	mutex_lock(&ps2dev->cmd_mutex);
+	ps2_begin_command(ps2dev);
 
 	if (ps2_sendbyte(ps2dev, 0xf3, FSP_CMD_TIMEOUT) < 0)
 		goto out;
@@ -275,7 +277,7 @@ static int fsp_page_reg_write(struct psmouse *psmouse, int reg_val)
 	rc = 0;
 
  out:
-	mutex_unlock(&ps2dev->cmd_mutex);
+	ps2_end_command(ps2dev);
 	dev_dbg(&ps2dev->serio->dev, "WRITE PAGE REG: to 0x%02x (rc = %d)\n",
 		reg_val, rc);
 	return rc;

drivers/input/mouse/synaptics_i2c.c

@@ -203,7 +203,7 @@ MODULE_PARM_DESC(no_filter, "No Filter. Default = 0 (off)");
  * and the irq configuration should be set to Falling Edge Trigger
  */
 /* Control IRQ / Polling option */
-static int polling_req;
+static bool polling_req;
 module_param(polling_req, bool, 0444);
 MODULE_PARM_DESC(polling_req, "Request Polling. Default = 0 (use irq)");
 
@@ -217,6 +217,7 @@ struct synaptics_i2c {
 	struct i2c_client	*client;
 	struct input_dev	*input;
 	struct delayed_work	dwork;
+	spinlock_t		lock;
 	int			no_data_count;
 	int			no_decel_param;
 	int			reduce_report_param;
@@ -366,17 +367,28 @@ static bool synaptics_i2c_get_input(struct synaptics_i2c *touch)
 	return xy_delta || gesture;
 }
 
-static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id)
+static void synaptics_i2c_reschedule_work(struct synaptics_i2c *touch,
+					  unsigned long delay)
 {
-	struct synaptics_i2c *touch = dev_id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&touch->lock, flags);
 
 	/*
-	 * We want to have the work run immediately but it might have
-	 * already been scheduled with a delay, that's why we have to
-	 * cancel it first.
+	 * If work is already scheduled then subsequent schedules will not
+	 * change the scheduled time that's why we have to cancel it first.
 	 */
-	cancel_delayed_work(&touch->dwork);
-	schedule_delayed_work(&touch->dwork, 0);
+	__cancel_delayed_work(&touch->dwork);
+	schedule_delayed_work(&touch->dwork, delay);
+
+	spin_unlock_irqrestore(&touch->lock, flags);
+}
+
+static irqreturn_t synaptics_i2c_irq(int irq, void *dev_id)
+{
+	struct synaptics_i2c *touch = dev_id;
+
+	synaptics_i2c_reschedule_work(touch, 0);
 
 	return IRQ_HANDLED;
 }
@@ -452,7 +464,7 @@ static void synaptics_i2c_work_handler(struct work_struct *work)
 	 * We poll the device once in THREAD_IRQ_SLEEP_SECS and
 	 * if error is detected, we try to reset and reconfigure the touchpad.
 	 */
-	schedule_delayed_work(&touch->dwork, delay);
+	synaptics_i2c_reschedule_work(touch, delay);
 }
 
 static int synaptics_i2c_open(struct input_dev *input)
@@ -465,8 +477,8 @@ static int synaptics_i2c_open(struct input_dev *input)
 		return ret;
 
 	if (polling_req)
-		schedule_delayed_work(&touch->dwork,
-				       msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
+		synaptics_i2c_reschedule_work(touch,
+				msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
 
 	return 0;
 }
@@ -521,6 +533,7 @@ struct synaptics_i2c *synaptics_i2c_touch_create(struct i2c_client *client)
 	touch->scan_rate_param = scan_rate;
 	set_scan_rate(touch, scan_rate);
 	INIT_DELAYED_WORK(&touch->dwork, synaptics_i2c_work_handler);
+	spin_lock_init(&touch->lock);
 
 	return touch;
 }
@@ -535,14 +548,12 @@ static int __devinit synaptics_i2c_probe(struct i2c_client *client,
 	if (!touch)
 		return -ENOMEM;
 
-	i2c_set_clientdata(client, touch);
-
 	ret = synaptics_i2c_reset_config(client);
 	if (ret)
 		goto err_mem_free;
 
 	if (client->irq < 1)
-		polling_req = 1;
+		polling_req = true;
 
 	touch->input = input_allocate_device();
 	if (!touch->input) {
@@ -563,7 +574,7 @@ static int __devinit synaptics_i2c_probe(struct i2c_client *client,
 			dev_warn(&touch->client->dev,
 				  "IRQ request failed: %d, "
 				  "falling back to polling\n", ret);
-			polling_req = 1;
+			polling_req = true;
 			synaptics_i2c_reg_set(touch->client,
 					      INTERRUPT_EN_REG, 0);
 		}
@@ -580,12 +591,14 @@ static int __devinit synaptics_i2c_probe(struct i2c_client *client,
 			 "Input device register failed: %d\n", ret);
 		goto err_input_free;
 	}
+
+	i2c_set_clientdata(client, touch);
+
 	return 0;
 
 err_input_free:
 	input_free_device(touch->input);
 err_mem_free:
-	i2c_set_clientdata(client, NULL);
 	kfree(touch);
 
 	return ret;
@@ -596,7 +609,7 @@ static int __devexit synaptics_i2c_remove(struct i2c_client *client)
 	struct synaptics_i2c *touch = i2c_get_clientdata(client);
 
 	if (!polling_req)
-		free_irq(touch->client->irq, touch);
+		free_irq(client->irq, touch);
 
 	input_unregister_device(touch->input);
 	i2c_set_clientdata(client, NULL);
@@ -627,8 +640,8 @@ static int synaptics_i2c_resume(struct i2c_client *client)
 	if (ret)
 		return ret;
 
-	schedule_delayed_work(&touch->dwork,
-			       msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
+	synaptics_i2c_reschedule_work(touch,
+				msecs_to_jiffies(NO_DATA_SLEEP_MSECS));
 
 	return 0;
 }

drivers/input/serio/i8042.c

@@ -87,8 +87,22 @@ static bool i8042_bypass_aux_irq_test;
 
 #include "i8042.h"
 
+/*
+ * i8042_lock protects serialization between i8042_command and
+ * the interrupt handler.
+ */
 static DEFINE_SPINLOCK(i8042_lock);
 
+/*
+ * Writers to AUX and KBD ports as well as users issuing i8042_command
+ * directly should acquire i8042_mutex (by means of calling
+ * i8042_lock_chip() and i8042_unlock_ship() helpers) to ensure that
+ * they do not disturb each other (unfortunately in many i8042
+ * implementations write to one of the ports will immediately abort
+ * command that is being processed by another port).
+ */
+static DEFINE_MUTEX(i8042_mutex);
+
 struct i8042_port {
 	struct serio *serio;
 	int irq;
@@ -113,6 +127,18 @@ static struct platform_device *i8042_platform_device;
 
 static irqreturn_t i8042_interrupt(int irq, void *dev_id);
 
+void i8042_lock_chip(void)
+{
+	mutex_lock(&i8042_mutex);
+}
+EXPORT_SYMBOL(i8042_lock_chip);
+
+void i8042_unlock_chip(void)
+{
+	mutex_unlock(&i8042_mutex);
+}
+EXPORT_SYMBOL(i8042_unlock_chip);
+
 /*
  * The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to
  * be ready for reading values from it / writing values to it.
@@ -1161,6 +1187,21 @@ static void __devexit i8042_unregister_ports(void)
 	}
 }
 
+/*
+ * Checks whether port belongs to i8042 controller.
+ */
+bool i8042_check_port_owner(const struct serio *port)
+{
+	int i;
+
+	for (i = 0; i < I8042_NUM_PORTS; i++)
+		if (i8042_ports[i].serio == port)
+			return true;
+
+	return false;
+}
+EXPORT_SYMBOL(i8042_check_port_owner);
+
 static void i8042_free_irqs(void)
 {
 	if (i8042_aux_irq_registered)

drivers/input/serio/libps2.c

@@ -17,6 +17,7 @@
 #include <linux/interrupt.h>
 #include <linux/input.h>
 #include <linux/serio.h>
+#include <linux/i8042.h>
 #include <linux/init.h>
 #include <linux/libps2.h>
 
@@ -54,6 +55,24 @@ int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout)
 }
 EXPORT_SYMBOL(ps2_sendbyte);
 
+void ps2_begin_command(struct ps2dev *ps2dev)
+{
+	mutex_lock(&ps2dev->cmd_mutex);
+
+	if (i8042_check_port_owner(ps2dev->serio))
+		i8042_lock_chip();
+}
+EXPORT_SYMBOL(ps2_begin_command);
+
+void ps2_end_command(struct ps2dev *ps2dev)
+{
+	if (i8042_check_port_owner(ps2dev->serio))
+		i8042_unlock_chip();
+
+	mutex_unlock(&ps2dev->cmd_mutex);
+}
+EXPORT_SYMBOL(ps2_end_command);
+
 /*
  * ps2_drain() waits for device to transmit requested number of bytes
  * and discards them.
@@ -66,7 +85,7 @@ void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout)
 		maxbytes = sizeof(ps2dev->cmdbuf);
 	}
 
-	mutex_lock(&ps2dev->cmd_mutex);
+	ps2_begin_command(ps2dev);
 
 	serio_pause_rx(ps2dev->serio);
 	ps2dev->flags = PS2_FLAG_CMD;
@@ -76,7 +95,8 @@ void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout)
 	wait_event_timeout(ps2dev->wait,
 			   !(ps2dev->flags & PS2_FLAG_CMD),
 			   msecs_to_jiffies(timeout));
-	mutex_unlock(&ps2dev->cmd_mutex);
+
+	ps2_end_command(ps2dev);
 }
 EXPORT_SYMBOL(ps2_drain);
 
@@ -237,9 +257,9 @@ int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command)
 {
 	int rc;
 
-	mutex_lock(&ps2dev->cmd_mutex);
+	ps2_begin_command(ps2dev);
 	rc = __ps2_command(ps2dev, param, command);
-	mutex_unlock(&ps2dev->cmd_mutex);
+	ps2_end_command(ps2dev);
 
 	return rc;
 }

drivers/input/touchscreen/Kconfig

@@ -48,8 +48,8 @@ config TOUCHSCREEN_AD7879_I2C
 	select TOUCHSCREEN_AD7879
 	help
 	  Say Y here if you have a touchscreen interface using the
-	  AD7879-1 controller, and your board-specific initialization
-	  code includes that in its table of I2C devices.
+	  AD7879-1/AD7889-1 controller, and your board-specific
+	  initialization code includes that in its table of I2C devices.
 
 	  If unsure, say N (but it's safe to say "Y").
 
@@ -62,7 +62,7 @@ config TOUCHSCREEN_AD7879_SPI
 	select TOUCHSCREEN_AD7879
 	help
 	  Say Y here if you have a touchscreen interface using the
-	  AD7879 controller, and your board-specific initialization
+	  AD7879/AD7889 controller, and your board-specific initialization
 	  code includes that in its table of SPI devices.
 
 	  If unsure, say N (but it's safe to say "Y").
@@ -169,6 +169,17 @@ config TOUCHSCREEN_WACOM_W8001
 	  To compile this driver as a module, choose M here: the
 	  module will be called wacom_w8001.
 
+config TOUCHSCREEN_MCS5000
+	tristate "MELFAS MCS-5000 touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
+	  chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mcs5000_ts.
 
 config TOUCHSCREEN_MTOUCH
 	tristate "MicroTouch serial touchscreens"

drivers/input/touchscreen/Makefile

@@ -17,6 +17,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
 obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
 obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
 obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
+obj-$(CONFIG_TOUCHSCREEN_MCS5000)	+= mcs5000_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MIGOR)		+= migor_ts.o
 obj-$(CONFIG_TOUCHSCREEN_MTOUCH)	+= mtouch.o
 obj-$(CONFIG_TOUCHSCREEN_MK712)		+= mk712.o

drivers/input/touchscreen/ad7879.c

 /*
- * Copyright (C) 2008 Michael Hennerich, Analog Devices Inc.
+ * Copyright (C) 2008-2009 Michael Hennerich, Analog Devices Inc.
  *
- * Description:	AD7879 based touchscreen, and GPIO driver (I2C/SPI Interface)
+ * Description:	AD7879/AD7889 based touchscreen, and GPIO driver
+ *		(I2C/SPI Interface)
  *
  * Bugs:        Enter bugs at http://blackfin.uclinux.org/
  *
@@ -747,6 +748,7 @@ static int __devexit ad7879_remove(struct i2c_client *client)
 
 static const struct i2c_device_id ad7879_id[] = {
 	{ "ad7879", 0 },
+	{ "ad7889", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ad7879_id);

drivers/input/touchscreen/mcs5000_ts.c

+/*
+ * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * Based on wm97xx-core.c
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mcs5000_ts.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+
+/* Registers */
+#define MCS5000_TS_STATUS		0x00
+#define STATUS_OFFSET			0
+#define STATUS_NO			(0 << STATUS_OFFSET)
+#define STATUS_INIT			(1 << STATUS_OFFSET)
+#define STATUS_SENSING			(2 << STATUS_OFFSET)
+#define STATUS_COORD			(3 << STATUS_OFFSET)
+#define STATUS_GESTURE			(4 << STATUS_OFFSET)
+#define ERROR_OFFSET			4
+#define ERROR_NO			(0 << ERROR_OFFSET)
+#define ERROR_POWER_ON_RESET		(1 << ERROR_OFFSET)
+#define ERROR_INT_RESET			(2 << ERROR_OFFSET)
+#define ERROR_EXT_RESET			(3 << ERROR_OFFSET)
+#define ERROR_INVALID_REG_ADDRESS	(8 << ERROR_OFFSET)
+#define ERROR_INVALID_REG_VALUE		(9 << ERROR_OFFSET)
+
+#define MCS5000_TS_OP_MODE		0x01
+#define RESET_OFFSET			0
+#define RESET_NO			(0 << RESET_OFFSET)
+#define RESET_EXT_SOFT			(1 << RESET_OFFSET)
+#define OP_MODE_OFFSET			1
+#define OP_MODE_SLEEP			(0 << OP_MODE_OFFSET)
+#define OP_MODE_ACTIVE			(1 << OP_MODE_OFFSET)
+#define GESTURE_OFFSET			4
+#define GESTURE_DISABLE			(0 << GESTURE_OFFSET)
+#define GESTURE_ENABLE			(1 << GESTURE_OFFSET)
+#define PROXIMITY_OFFSET		5
+#define PROXIMITY_DISABLE		(0 << PROXIMITY_OFFSET)
+#define PROXIMITY_ENABLE		(1 << PROXIMITY_OFFSET)
+#define SCAN_MODE_OFFSET		6
+#define SCAN_MODE_INTERRUPT		(0 << SCAN_MODE_OFFSET)
+#define SCAN_MODE_POLLING		(1 << SCAN_MODE_OFFSET)
+#define REPORT_RATE_OFFSET		7
+#define REPORT_RATE_40			(0 << REPORT_RATE_OFFSET)
+#define REPORT_RATE_80			(1 << REPORT_RATE_OFFSET)
+
+#define MCS5000_TS_SENS_CTL		0x02
+#define MCS5000_TS_FILTER_CTL		0x03
+#define PRI_FILTER_OFFSET		0
+#define SEC_FILTER_OFFSET		4
+
+#define MCS5000_TS_X_SIZE_UPPER		0x08
+#define MCS5000_TS_X_SIZE_LOWER		0x09
+#define MCS5000_TS_Y_SIZE_UPPER		0x0A
+#define MCS5000_TS_Y_SIZE_LOWER		0x0B
+
+#define MCS5000_TS_INPUT_INFO		0x10
+#define INPUT_TYPE_OFFSET		0
+#define INPUT_TYPE_NONTOUCH		(0 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_SINGLE		(1 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_DUAL			(2 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_PALM			(3 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_PROXIMITY		(7 << INPUT_TYPE_OFFSET)
+#define GESTURE_CODE_OFFSET		3
+#define GESTURE_CODE_NO			(0 << GESTURE_CODE_OFFSET)
+
+#define MCS5000_TS_X_POS_UPPER		0x11
+#define MCS5000_TS_X_POS_LOWER		0x12
+#define MCS5000_TS_Y_POS_UPPER		0x13
+#define MCS5000_TS_Y_POS_LOWER		0x14
+#define MCS5000_TS_Z_POS		0x15
+#define MCS5000_TS_WIDTH		0x16
+#define MCS5000_TS_GESTURE_VAL		0x17
+#define MCS5000_TS_MODULE_REV		0x20
+#define MCS5000_TS_FIRMWARE_VER		0x21
+
+/* Touchscreen absolute values */
+#define MCS5000_MAX_XC			0x3ff
+#define MCS5000_MAX_YC			0x3ff
+
+enum mcs5000_ts_read_offset {
+	READ_INPUT_INFO,
+	READ_X_POS_UPPER,
+	READ_X_POS_LOWER,
+	READ_Y_POS_UPPER,
+	READ_Y_POS_LOWER,
+	READ_BLOCK_SIZE,
+};
+
+/* Each client has this additional data */
+struct mcs5000_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	const struct mcs5000_ts_platform_data *platform_data;
+};
+
+static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
+{
+	struct mcs5000_ts_data *data = dev_id;
+	struct i2c_client *client = data->client;
+	u8 buffer[READ_BLOCK_SIZE];
+	int err;
+	int x;
+	int y;
+
+	err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO,
+			READ_BLOCK_SIZE, buffer);
+	if (err < 0) {
+		dev_err(&client->dev, "%s, err[%d]\n", __func__, err);
+		goto out;
+	}
+
+	switch (buffer[READ_INPUT_INFO]) {
+	case INPUT_TYPE_NONTOUCH:
+		input_report_key(data->input_dev, BTN_TOUCH, 0);
+		input_sync(data->input_dev);
+		break;
+
+	case INPUT_TYPE_SINGLE:
+		x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER];
+		y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER];
+
+		input_report_key(data->input_dev, BTN_TOUCH, 1);
+		input_report_abs(data->input_dev, ABS_X, x);
+		input_report_abs(data->input_dev, ABS_Y, y);
+		input_sync(data->input_dev);
+		break;
+
+	case INPUT_TYPE_DUAL:
+		/* TODO */
+		break;
+
+	case INPUT_TYPE_PALM:
+		/* TODO */
+		break;
+
+	case INPUT_TYPE_PROXIMITY:
+		/* TODO */
+		break;
+
+	default:
+		dev_err(&client->dev, "Unknown ts input type %d\n",
+				buffer[READ_INPUT_INFO]);
+		break;
+	}
+
+ out:
+	return IRQ_HANDLED;
+}
+
+static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data)
+{
+	const struct mcs5000_ts_platform_data *platform_data =
+		data->platform_data;
+	struct i2c_client *client = data->client;
+
+	/* Touch reset & sleep mode */
+	i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE,
+			RESET_EXT_SOFT | OP_MODE_SLEEP);
+
+	/* Touch size */
+	i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER,
+			platform_data->x_size >> 8);
+	i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER,
+			platform_data->x_size & 0xff);
+	i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER,
+			platform_data->y_size >> 8);
+	i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER,
+			platform_data->y_size & 0xff);
+
+	/* Touch active mode & 80 report rate */
+	i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE,
+			OP_MODE_ACTIVE | REPORT_RATE_80);
+}
+
+static int __devinit mcs5000_ts_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct mcs5000_ts_data *data;
+	struct input_dev *input_dev;
+	int ret;
+
+	if (!client->dev.platform_data)
+		return -EINVAL;
+
+	data = kzalloc(sizeof(struct mcs5000_ts_data), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		ret = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->client = client;
+	data->input_dev = input_dev;
+	data->platform_data = client->dev.platform_data;
+
+	input_dev->name = "MELPAS MCS-5000 Touchscreen";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0);
+
+	input_set_drvdata(input_dev, data);
+
+	if (data->platform_data->cfg_pin)
+		data->platform_data->cfg_pin();
+
+	ret = request_threaded_irq(client->irq, NULL, mcs5000_ts_interrupt,
+			IRQF_TRIGGER_LOW | IRQF_ONESHOT, "mcs5000_ts", data);
+
+	if (ret < 0) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_mem;
+	}
+
+	ret = input_register_device(data->input_dev);
+	if (ret < 0)
+		goto err_free_irq;
+
+	mcs5000_ts_phys_init(data);
+	i2c_set_clientdata(client, data);
+
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, data);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+	return ret;
+}
+
+static int __devexit mcs5000_ts_remove(struct i2c_client *client)
+{
+	struct mcs5000_ts_data *data = i2c_get_clientdata(client);
+
+	free_irq(client->irq, data);
+	input_unregister_device(data->input_dev);
+	kfree(data);
+	i2c_set_clientdata(client, NULL);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int mcs5000_ts_suspend(struct i2c_client *client, pm_message_t mesg)
+{
+	/* Touch sleep mode */
+	i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP);
+
+	return 0;
+}
+
+static int mcs5000_ts_resume(struct i2c_client *client)
+{
+	struct mcs5000_ts_data *data = i2c_get_clientdata(client);
+
+	mcs5000_ts_phys_init(data);
+
+	return 0;
+}
+#else
+#define mcs5000_ts_suspend	NULL
+#define mcs5000_ts_resume	NULL
+#endif
+
+static const struct i2c_device_id mcs5000_ts_id[] = {
+	{ "mcs5000_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id);
+
+static struct i2c_driver mcs5000_ts_driver = {
+	.probe		= mcs5000_ts_probe,
+	.remove		= __devexit_p(mcs5000_ts_remove),
+	.suspend	= mcs5000_ts_suspend,
+	.resume		= mcs5000_ts_resume,
+	.driver = {
+		.name = "mcs5000_ts",
+	},
+	.id_table	= mcs5000_ts_id,
+};
+
+static int __init mcs5000_ts_init(void)
+{
+	return i2c_add_driver(&mcs5000_ts_driver);
+}
+
+static void __exit mcs5000_ts_exit(void)
+{
+	i2c_del_driver(&mcs5000_ts_driver);
+}
+
+module_init(mcs5000_ts_init);
+module_exit(mcs5000_ts_exit);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller");
+MODULE_LICENSE("GPL");

drivers/leds/leds-clevo-mail.c

@@ -93,6 +93,8 @@ static struct dmi_system_id __initdata mail_led_whitelist[] = {
 static void clevo_mail_led_set(struct led_classdev *led_cdev,
 				enum led_brightness value)
 {
+	i8042_lock_chip();
+
 	if (value == LED_OFF)
 		i8042_command(NULL, CLEVO_MAIL_LED_OFF);
 	else if (value <= LED_HALF)
@@ -100,6 +102,8 @@ static void clevo_mail_led_set(struct led_classdev *led_cdev,
 	else
 		i8042_command(NULL, CLEVO_MAIL_LED_BLINK_1HZ);
 
+	i8042_unlock_chip();
+
 }
 
 static int clevo_mail_led_blink(struct led_classdev *led_cdev,
@@ -108,6 +112,8 @@ static int clevo_mail_led_blink(struct led_classdev *led_cdev,
 {
 	int status = -EINVAL;
 
+	i8042_lock_chip();
+
 	if (*delay_on == 0 /* ms */ && *delay_off == 0 /* ms */) {
 		/* Special case: the leds subsystem requested us to
 		 * chose one user friendly blinking of the LED, and
@@ -135,6 +141,8 @@ static int clevo_mail_led_blink(struct led_classdev *led_cdev,
 		       *delay_on, *delay_off);
 	}
 
+	i8042_unlock_chip();
+
 	return status;
 }
 

drivers/platform/x86/acer-wmi.c

@@ -746,7 +746,9 @@ static acpi_status WMID_set_u32(u32 value, u32 cap, struct wmi_interface *iface)
 			return AE_BAD_PARAMETER;
 		if (quirks->mailled == 1) {
 			param = value ? 0x92 : 0x93;
+			i8042_lock_chip();
 			i8042_command(&param, 0x1059);
+			i8042_unlock_chip();
 			return 0;
 		}
 		break;

include/linux/i2c/adp5588.h

+/*
+ * Analog Devices ADP5588 I/O Expander and QWERTY Keypad Controller
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _ADP5588_H
+#define _ADP5588_H
+
+#define DEV_ID 0x00		/* Device ID */
+#define CFG 0x01		/* Configuration Register1 */
+#define INT_STAT 0x02		/* Interrupt Status Register */
+#define KEY_LCK_EC_STAT 0x03	/* Key Lock and Event Counter Register */
+#define Key_EVENTA 0x04		/* Key Event Register A */
+#define Key_EVENTB 0x05		/* Key Event Register B */
+#define Key_EVENTC 0x06		/* Key Event Register C */
+#define Key_EVENTD 0x07		/* Key Event Register D */
+#define Key_EVENTE 0x08		/* Key Event Register E */
+#define Key_EVENTF 0x09		/* Key Event Register F */
+#define Key_EVENTG 0x0A		/* Key Event Register G */
+#define Key_EVENTH 0x0B		/* Key Event Register H */
+#define Key_EVENTI 0x0C		/* Key Event Register I */
+#define Key_EVENTJ 0x0D		/* Key Event Register J */
+#define KP_LCK_TMR 0x0E		/* Keypad Lock1 to Lock2 Timer */
+#define UNLOCK1 0x0F		/* Unlock Key1 */
+#define UNLOCK2 0x10		/* Unlock Key2 */
+#define GPIO_INT_STAT1 0x11	/* GPIO Interrupt Status */
+#define GPIO_INT_STAT2 0x12	/* GPIO Interrupt Status */
+#define GPIO_INT_STAT3 0x13	/* GPIO Interrupt Status */
+#define GPIO_DAT_STAT1 0x14	/* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_STAT2 0x15	/* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_STAT3 0x16	/* GPIO Data Status, Read twice to clear */
+#define GPIO_DAT_OUT1 0x17	/* GPIO DATA OUT */
+#define GPIO_DAT_OUT2 0x18	/* GPIO DATA OUT */
+#define GPIO_DAT_OUT3 0x19	/* GPIO DATA OUT */
+#define GPIO_INT_EN1 0x1A	/* GPIO Interrupt Enable */
+#define GPIO_INT_EN2 0x1B	/* GPIO Interrupt Enable */
+#define GPIO_INT_EN3 0x1C	/* GPIO Interrupt Enable */
+#define KP_GPIO1 0x1D		/* Keypad or GPIO Selection */
+#define KP_GPIO2 0x1E		/* Keypad or GPIO Selection */
+#define KP_GPIO3 0x1F		/* Keypad or GPIO Selection */
+#define GPI_EM1 0x20		/* GPI Event Mode 1 */
+#define GPI_EM2 0x21		/* GPI Event Mode 2 */
+#define GPI_EM3 0x22		/* GPI Event Mode 3 */
+#define GPIO_DIR1 0x23		/* GPIO Data Direction */
+#define GPIO_DIR2 0x24		/* GPIO Data Direction */
+#define GPIO_DIR3 0x25		/* GPIO Data Direction */
+#define GPIO_INT_LVL1 0x26	/* GPIO Edge/Level Detect */
+#define GPIO_INT_LVL2 0x27	/* GPIO Edge/Level Detect */
+#define GPIO_INT_LVL3 0x28	/* GPIO Edge/Level Detect */
+#define Debounce_DIS1 0x29	/* Debounce Disable */
+#define Debounce_DIS2 0x2A	/* Debounce Disable */
+#define Debounce_DIS3 0x2B	/* Debounce Disable */
+#define GPIO_PULL1 0x2C		/* GPIO Pull Disable */
+#define GPIO_PULL2 0x2D		/* GPIO Pull Disable */
+#define GPIO_PULL3 0x2E		/* GPIO Pull Disable */
+#define CMP_CFG_STAT 0x30	/* Comparator Configuration and Status Register */
+#define CMP_CONFG_SENS1 0x31	/* Sensor1 Comparator Configuration Register */
+#define CMP_CONFG_SENS2 0x32	/* L2 Light Sensor Reference Level, Output Falling for Sensor 1 */
+#define CMP1_LVL2_TRIP 0x33	/* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 1 */
+#define CMP1_LVL2_HYS 0x34	/* L3 Light Sensor Reference Level, Output Falling For Sensor 1 */
+#define CMP1_LVL3_TRIP 0x35	/* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 1 */
+#define CMP1_LVL3_HYS 0x36	/* Sensor 2 Comparator Configuration Register */
+#define CMP2_LVL2_TRIP 0x37	/* L2 Light Sensor Reference Level, Output Falling for Sensor 2 */
+#define CMP2_LVL2_HYS 0x38	/* L2 Light Sensor Hysteresis (Active when Output Rising) for Sensor 2 */
+#define CMP2_LVL3_TRIP 0x39	/* L3 Light Sensor Reference Level, Output Falling For Sensor 2 */
+#define CMP2_LVL3_HYS 0x3A	/* L3 Light Sensor Hysteresis (Active when Output Rising) For Sensor 2 */
+#define CMP1_ADC_DAT_R1 0x3B	/* Comparator 1 ADC data Register1 */
+#define CMP1_ADC_DAT_R2 0x3C	/* Comparator 1 ADC data Register2 */
+#define CMP2_ADC_DAT_R1 0x3D	/* Comparator 2 ADC data Register1 */
+#define CMP2_ADC_DAT_R2 0x3E	/* Comparator 2 ADC data Register2 */
+
+#define ADP5588_DEVICE_ID_MASK	0xF
+
+/* Put one of these structures in i2c_board_info platform_data */
+
+#define ADP5588_KEYMAPSIZE	80
+
+struct adp5588_kpad_platform_data {
+	int rows;			/* Number of rows */
+	int cols;			/* Number of columns */
+	const unsigned short *keymap;	/* Pointer to keymap */
+	unsigned short keymapsize;	/* Keymap size */
+	unsigned repeat:1;		/* Enable key repeat */
+	unsigned en_keylock:1;		/* Enable Key Lock feature */
+	unsigned short unlock_key1;	/* Unlock Key 1 */
+	unsigned short unlock_key2;	/* Unlock Key 2 */
+};
+
+#endif

include/linux/i2c/mcs5000_ts.h

+/*
+ * mcs5000_ts.h
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __LINUX_MCS5000_TS_H
+#define __LINUX_MCS5000_TS_H
+
+/* platform data for the MELFAS MCS-5000 touchscreen driver */
+struct mcs5000_ts_platform_data {
+	void (*cfg_pin)(void);
+	int x_size;
+	int y_size;
+};
+
+#endif	/* __LINUX_MCS5000_TS_H */

include/linux/i8042.h

@@ -7,6 +7,7 @@
  * the Free Software Foundation.
  */
 
+#include <linux/types.h>
 
 /*
  * Standard commands.
@@ -30,6 +31,35 @@
 #define I8042_CMD_MUX_PFX	0x0090
 #define I8042_CMD_MUX_SEND	0x1090
 
+struct serio;
+
+#if defined(CONFIG_SERIO_I8042) || defined(CONFIG_SERIO_I8042_MODULE)
+
+void i8042_lock_chip(void);
+void i8042_unlock_chip(void);
 int i8042_command(unsigned char *param, int command);
+bool i8042_check_port_owner(const struct serio *);
+
+#else
+
+void i8042_lock_chip(void)
+{
+}
+
+void i8042_unlock_chip(void)
+{
+}
+
+int i8042_command(unsigned char *param, int command)
+{
+	return -ENOSYS;
+}
+
+bool i8042_check_port_owner(const struct serio *serio)
+{
+	return false;
+}
+
+#endif
 
 #endif

include/linux/input.h

@@ -1123,7 +1123,7 @@ struct input_dev {
 	struct mutex mutex;
 
 	unsigned int users;
-	int going_away;
+	bool going_away;
 
 	struct device dev;
 

include/linux/libps2.h

@@ -44,6 +44,8 @@ struct ps2dev {
 void ps2_init(struct ps2dev *ps2dev, struct serio *serio);
 int ps2_sendbyte(struct ps2dev *ps2dev, unsigned char byte, int timeout);
 void ps2_drain(struct ps2dev *ps2dev, int maxbytes, int timeout);
+void ps2_begin_command(struct ps2dev *ps2dev);
+void ps2_end_command(struct ps2dev *ps2dev);
 int __ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
 int ps2_command(struct ps2dev *ps2dev, unsigned char *param, int command);
 int ps2_handle_ack(struct ps2dev *ps2dev, unsigned char data);