Commit 0e580290 authored by AngeloGioacchino Del Regno's avatar AngeloGioacchino Del Regno Committed by Daniel Lezcano

thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976

Add support for reading calibrated value from thermistors in
MSM8956, MSM8976 and their APQ variants.
Signed-off-by: default avatarAngeloGioacchino Del Regno <kholk11@gmail.com>
Reviewed-by: default avatarAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: default avatarDaniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191005104133.30297-2-kholk11@gmail.com
parent 573ae2d9
......@@ -6,6 +6,7 @@
#include <linux/bitops.h>
#include <linux/regmap.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include "tsens.h"
/* ----- SROT ------ */
......@@ -20,6 +21,68 @@
#define TM_HIGH_LOW_INT_STATUS_OFF 0x0088
#define TM_HIGH_LOW_Sn_INT_THRESHOLD_OFF 0x0090
/* eeprom layout data for msm8956/76 (v1) */
#define MSM8976_BASE0_MASK 0xff
#define MSM8976_BASE1_MASK 0xff
#define MSM8976_BASE1_SHIFT 8
#define MSM8976_S0_P1_MASK 0x3f00
#define MSM8976_S1_P1_MASK 0x3f00000
#define MSM8976_S2_P1_MASK 0x3f
#define MSM8976_S3_P1_MASK 0x3f000
#define MSM8976_S4_P1_MASK 0x3f00
#define MSM8976_S5_P1_MASK 0x3f00000
#define MSM8976_S6_P1_MASK 0x3f
#define MSM8976_S7_P1_MASK 0x3f000
#define MSM8976_S8_P1_MASK 0x1f8
#define MSM8976_S9_P1_MASK 0x1f8000
#define MSM8976_S10_P1_MASK 0xf8000000
#define MSM8976_S10_P1_MASK_1 0x1
#define MSM8976_S0_P2_MASK 0xfc000
#define MSM8976_S1_P2_MASK 0xfc000000
#define MSM8976_S2_P2_MASK 0xfc0
#define MSM8976_S3_P2_MASK 0xfc0000
#define MSM8976_S4_P2_MASK 0xfc000
#define MSM8976_S5_P2_MASK 0xfc000000
#define MSM8976_S6_P2_MASK 0xfc0
#define MSM8976_S7_P2_MASK 0xfc0000
#define MSM8976_S8_P2_MASK 0x7e00
#define MSM8976_S9_P2_MASK 0x7e00000
#define MSM8976_S10_P2_MASK 0x7e
#define MSM8976_S0_P1_SHIFT 8
#define MSM8976_S1_P1_SHIFT 20
#define MSM8976_S2_P1_SHIFT 0
#define MSM8976_S3_P1_SHIFT 12
#define MSM8976_S4_P1_SHIFT 8
#define MSM8976_S5_P1_SHIFT 20
#define MSM8976_S6_P1_SHIFT 0
#define MSM8976_S7_P1_SHIFT 12
#define MSM8976_S8_P1_SHIFT 3
#define MSM8976_S9_P1_SHIFT 15
#define MSM8976_S10_P1_SHIFT 27
#define MSM8976_S10_P1_SHIFT_1 0
#define MSM8976_S0_P2_SHIFT 14
#define MSM8976_S1_P2_SHIFT 26
#define MSM8976_S2_P2_SHIFT 6
#define MSM8976_S3_P2_SHIFT 18
#define MSM8976_S4_P2_SHIFT 14
#define MSM8976_S5_P2_SHIFT 26
#define MSM8976_S6_P2_SHIFT 6
#define MSM8976_S7_P2_SHIFT 18
#define MSM8976_S8_P2_SHIFT 9
#define MSM8976_S9_P2_SHIFT 21
#define MSM8976_S10_P2_SHIFT 1
#define MSM8976_CAL_SEL_MASK 0x3
#define MSM8976_CAL_DEGC_PT1 30
#define MSM8976_CAL_DEGC_PT2 120
#define MSM8976_SLOPE_FACTOR 1000
#define MSM8976_SLOPE_DEFAULT 3200
/* eeprom layout data for qcs404/405 (v1) */
#define BASE0_MASK 0x000007f8
#define BASE1_MASK 0x0007f800
......@@ -79,6 +142,30 @@
#define CAL_SEL_MASK 7
#define CAL_SEL_SHIFT 0
static void compute_intercept_slope_8976(struct tsens_priv *priv,
u32 *p1, u32 *p2, u32 mode)
{
int i;
priv->sensor[0].slope = 3313;
priv->sensor[1].slope = 3275;
priv->sensor[2].slope = 3320;
priv->sensor[3].slope = 3246;
priv->sensor[4].slope = 3279;
priv->sensor[5].slope = 3257;
priv->sensor[6].slope = 3234;
priv->sensor[7].slope = 3269;
priv->sensor[8].slope = 3255;
priv->sensor[9].slope = 3239;
priv->sensor[10].slope = 3286;
for (i = 0; i < priv->num_sensors; i++) {
priv->sensor[i].offset = (p1[i] * MSM8976_SLOPE_FACTOR) -
(MSM8976_CAL_DEGC_PT1 *
priv->sensor[i].slope);
}
}
static int calibrate_v1(struct tsens_priv *priv)
{
u32 base0 = 0, base1 = 0;
......@@ -145,7 +232,74 @@ static int calibrate_v1(struct tsens_priv *priv)
return 0;
}
/* v1.x: qcs404,405 */
static int calibrate_8976(struct tsens_priv *priv)
{
int base0 = 0, base1 = 0, i;
u32 p1[11], p2[11];
int mode = 0, tmp = 0;
u32 *qfprom_cdata;
qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib");
if (IS_ERR(qfprom_cdata)) {
kfree(qfprom_cdata);
return PTR_ERR(qfprom_cdata);
}
mode = (qfprom_cdata[4] & MSM8976_CAL_SEL_MASK);
dev_dbg(priv->dev, "calibration mode is %d\n", mode);
switch (mode) {
case TWO_PT_CALIB:
base1 = (qfprom_cdata[2] & MSM8976_BASE1_MASK) >> MSM8976_BASE1_SHIFT;
p2[0] = (qfprom_cdata[0] & MSM8976_S0_P2_MASK) >> MSM8976_S0_P2_SHIFT;
p2[1] = (qfprom_cdata[0] & MSM8976_S1_P2_MASK) >> MSM8976_S1_P2_SHIFT;
p2[2] = (qfprom_cdata[1] & MSM8976_S2_P2_MASK) >> MSM8976_S2_P2_SHIFT;
p2[3] = (qfprom_cdata[1] & MSM8976_S3_P2_MASK) >> MSM8976_S3_P2_SHIFT;
p2[4] = (qfprom_cdata[2] & MSM8976_S4_P2_MASK) >> MSM8976_S4_P2_SHIFT;
p2[5] = (qfprom_cdata[2] & MSM8976_S5_P2_MASK) >> MSM8976_S5_P2_SHIFT;
p2[6] = (qfprom_cdata[3] & MSM8976_S6_P2_MASK) >> MSM8976_S6_P2_SHIFT;
p2[7] = (qfprom_cdata[3] & MSM8976_S7_P2_MASK) >> MSM8976_S7_P2_SHIFT;
p2[8] = (qfprom_cdata[4] & MSM8976_S8_P2_MASK) >> MSM8976_S8_P2_SHIFT;
p2[9] = (qfprom_cdata[4] & MSM8976_S9_P2_MASK) >> MSM8976_S9_P2_SHIFT;
p2[10] = (qfprom_cdata[5] & MSM8976_S10_P2_MASK) >> MSM8976_S10_P2_SHIFT;
for (i = 0; i < priv->num_sensors; i++)
p2[i] = ((base1 + p2[i]) << 2);
/* Fall through */
case ONE_PT_CALIB2:
base0 = qfprom_cdata[0] & MSM8976_BASE0_MASK;
p1[0] = (qfprom_cdata[0] & MSM8976_S0_P1_MASK) >> MSM8976_S0_P1_SHIFT;
p1[1] = (qfprom_cdata[0] & MSM8976_S1_P1_MASK) >> MSM8976_S1_P1_SHIFT;
p1[2] = (qfprom_cdata[1] & MSM8976_S2_P1_MASK) >> MSM8976_S2_P1_SHIFT;
p1[3] = (qfprom_cdata[1] & MSM8976_S3_P1_MASK) >> MSM8976_S3_P1_SHIFT;
p1[4] = (qfprom_cdata[2] & MSM8976_S4_P1_MASK) >> MSM8976_S4_P1_SHIFT;
p1[5] = (qfprom_cdata[2] & MSM8976_S5_P1_MASK) >> MSM8976_S5_P1_SHIFT;
p1[6] = (qfprom_cdata[3] & MSM8976_S6_P1_MASK) >> MSM8976_S6_P1_SHIFT;
p1[7] = (qfprom_cdata[3] & MSM8976_S7_P1_MASK) >> MSM8976_S7_P1_SHIFT;
p1[8] = (qfprom_cdata[4] & MSM8976_S8_P1_MASK) >> MSM8976_S8_P1_SHIFT;
p1[9] = (qfprom_cdata[4] & MSM8976_S9_P1_MASK) >> MSM8976_S9_P1_SHIFT;
p1[10] = (qfprom_cdata[4] & MSM8976_S10_P1_MASK) >> MSM8976_S10_P1_SHIFT;
tmp = (qfprom_cdata[5] & MSM8976_S10_P1_MASK_1) << MSM8976_S10_P1_SHIFT_1;
p1[10] |= tmp;
for (i = 0; i < priv->num_sensors; i++)
p1[i] = (((base0) + p1[i]) << 2);
break;
default:
for (i = 0; i < priv->num_sensors; i++) {
p1[i] = 500;
p2[i] = 780;
}
break;
}
compute_intercept_slope_8976(priv, p1, p2, mode);
kfree(qfprom_cdata);
return 0;
}
/* v1.x: msm8956,8976,qcs404,405 */
static const struct tsens_features tsens_v1_feat = {
.ver_major = VER_1_X,
......@@ -221,3 +375,18 @@ const struct tsens_plat_data data_tsens_v1 = {
.feat = &tsens_v1_feat,
.fields = tsens_v1_regfields,
};
static const struct tsens_ops ops_8976 = {
.init = init_common,
.calibrate = calibrate_8976,
.get_temp = get_temp_tsens_valid,
};
/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */
const struct tsens_plat_data data_8976 = {
.num_sensors = 11,
.ops = &ops_8976,
.hw_ids = (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10},
.feat = &tsens_v1_feat,
.fields = tsens_v1_regfields,
};
......@@ -62,6 +62,9 @@ static const struct of_device_id tsens_table[] = {
}, {
.compatible = "qcom,msm8974-tsens",
.data = &data_8974,
}, {
.compatible = "qcom,msm8976-tsens",
.data = &data_8976,
}, {
.compatible = "qcom,msm8996-tsens",
.data = &data_8996,
......
......@@ -508,7 +508,7 @@ extern const struct tsens_plat_data data_8960;
extern const struct tsens_plat_data data_8916, data_8974;
/* TSENS v1 targets */
extern const struct tsens_plat_data data_tsens_v1;
extern const struct tsens_plat_data data_tsens_v1, data_8976;
/* TSENS v2 targets */
extern const struct tsens_plat_data data_8996, data_tsens_v2;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment