arm64: dts: mt8173: Use real clock for UARTs

We used to use a fixed rate clock for the UARTs. Now that we have clock
support we can associate the correct clocks to the UARTs and drop the
26MHz fixed rate UART clock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

arch/arm64/boot/dts/mediatek/mt8173.dtsi

@@ -82,12 +82,6 @@ psci {
 		cpu_on	      = <0x84000003>;
 	};
 
-	uart_clk: dummy26m {
-		compatible = "fixed-clock";
-		clock-frequency = <26000000>;
-		#clock-cells = <0>;
-	};
-
 	clk26m: oscillator@0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -198,7 +192,8 @@ uart0: serial@11002000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11002000 0 0x400>;
 			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART0_SEL>, <&pericfg CLK_PERI_UART0>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -207,7 +202,8 @@ uart1: serial@11003000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11003000 0 0x400>;
 			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART1_SEL>, <&pericfg CLK_PERI_UART1>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -216,7 +212,8 @@ uart2: serial@11004000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11004000 0 0x400>;
 			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART2_SEL>, <&pericfg CLK_PERI_UART2>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 
@@ -225,7 +222,8 @@ uart3: serial@11005000 {
 				     "mediatek,mt6577-uart";
 			reg = <0 0x11005000 0 0x400>;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
-			clocks = <&uart_clk>;
+			clocks = <&pericfg CLK_PERI_UART3_SEL>, <&pericfg CLK_PERI_UART3>;
+			clock-names = "baud", "bus";
 			status = "disabled";
 		};
 	};