qed: Replace memset with eth_zero_addr

Use eth_zero_addr to assign zero address to the given address array
instead of memset when the second argument in memset is address
of zero. Also, it makes the code clearer
Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qed/qed_l2.c

@@ -1846,7 +1846,7 @@ static int qed_fill_eth_dev_info(struct qed_dev *cdev,
 	qed_fill_dev_info(cdev, &info->common);
 
 	if (IS_VF(cdev))
-		memset(info->common.hw_mac, 0, ETH_ALEN);
+		eth_zero_addr(info->common.hw_mac);
 
 	return 0;
 }

drivers/net/ethernet/qlogic/qed/qed_sriov.c

@@ -1224,7 +1224,7 @@ static void qed_iov_clean_vf(struct qed_hwfn *p_hwfn, u8 vfid)
 		return;
 
 	/* Clear the VF mac */
-	memset(vf_info->mac, 0, ETH_ALEN);
+	eth_zero_addr(vf_info->mac);
 
 	vf_info->rx_accept_mode = 0;
 	vf_info->tx_accept_mode = 0;
@@ -2626,8 +2626,7 @@ static int qed_iov_vf_update_mac_shadow(struct qed_hwfn *p_hwfn,
 		for (i = 0; i < QED_ETH_VF_NUM_MAC_FILTERS; i++) {
 			if (ether_addr_equal(p_vf->shadow_config.macs[i],
 					     p_params->mac)) {
-				memset(p_vf->shadow_config.macs[i], 0,
-				       ETH_ALEN);
+				eth_zero_addr(p_vf->shadow_config.macs[i]);
 				break;
 			}
 		}
@@ -2640,7 +2639,7 @@ static int qed_iov_vf_update_mac_shadow(struct qed_hwfn *p_hwfn,
 	} else if (p_params->opcode == QED_FILTER_REPLACE ||
 		   p_params->opcode == QED_FILTER_FLUSH) {
 		for (i = 0; i < QED_ETH_VF_NUM_MAC_FILTERS; i++)
-			memset(p_vf->shadow_config.macs[i], 0, ETH_ALEN);
+			eth_zero_addr(p_vf->shadow_config.macs[i]);
 	}
 
 	/* List the new MAC address */