Commit 0f8ffe17 authored by Hante Meuleman's avatar Hante Meuleman Committed by John W. Linville

brcmfmac: update escan for multiple bss and simplify.

Add support for scanning on non primary netdev (p2p) and
simplify the p2p scanning preparation.
Reviewed-by: default avatarArend Van Spriel <arend@broadcom.com>
Reviewed-by: default avatarPieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: default avatarHante Meuleman <meuleman@broadcom.com>
Signed-off-by: default avatarArend van Spriel <arend@broadcom.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 5f4f9f11
......@@ -91,11 +91,6 @@ struct brcmf_p2p_scan_le {
};
};
static struct brcmf_cfg80211_vif *p2p_discover_vif(struct brcmf_p2p_info *p2p)
{
return p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
}
/**
* brcmf_p2p_set_firmware() - prepare firmware for peer-to-peer operation.
*
......@@ -194,34 +189,6 @@ static s32 brcmf_p2p_set_discover_state(struct brcmf_if *ifp, u8 state,
return ret;
}
/**
* brcmf_p2p_discover_disable_search() - reset discover state.
*
* @p2p: P2P specific data.
*
* Reset the discover state to @WL_P2P_DISC_ST_SCAN. Returns 0 on success.
*/
static s32 brcmf_p2p_discover_disable_search(struct brcmf_p2p_info *p2p)
{
struct brcmf_cfg80211_vif *vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
struct brcmf_p2p_disc_st_le discovery_mode;
int ret;
/*
* vif presence indicates discovery is initialized.
*/
if (!vif)
return -ENODEV;
ret = brcmf_fil_bsscfg_data_get(vif->ifp, "p2p_state",
&discovery_mode,
sizeof(discovery_mode));
if (!ret && discovery_mode.state != WL_P2P_DISC_ST_SCAN)
ret = brcmf_p2p_set_discover_state(vif->ifp,
WL_P2P_DISC_ST_SCAN, 0, 0);
return ret;
}
/**
* brcmf_p2p_init_discovery() - enable discovery in the firmware.
*
......@@ -376,32 +343,6 @@ static int brcmf_p2p_enable_discovery(struct brcmf_p2p_info *p2p)
}
/**
* brcmf_p2p_configure_probereq() - Configure probe request data.
*
* @p2p: P2P specific data.
* @ie: buffer containing information elements.
* @ie_len: length of @ie buffer.
*
*/
static int brcmf_p2p_configure_probereq(struct brcmf_p2p_info *p2p,
const u8 *ie, u32 ie_len)
{
struct brcmf_cfg80211_vif *vif;
s32 err = 0;
brcmf_dbg(TRACE, "enter\n");
vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG,
ie, ie_len);
if (err < 0)
brcmf_err("set probreq ie occurs error %d\n", err);
return err;
}
/*
* brcmf_p2p_escan() - initiate a P2P scan.
*
* @p2p: P2P specific data.
......@@ -621,12 +562,14 @@ static s32 brcmf_p2p_run_escan(struct brcmf_cfg80211_info *cfg,
*
* @wiphy: wiphy device.
* @request: scan request from cfg80211.
* @vif: vif on which scan request is to be executed.
*
* Prepare the scan appropriately for type of scan requested. Overrides the
* escan .run() callback for peer-to-peer scanning.
*/
int brcmf_p2p_scan_prep(struct wiphy *wiphy,
struct cfg80211_scan_request *request)
struct cfg80211_scan_request *request,
struct brcmf_cfg80211_vif *vif)
{
struct brcmf_cfg80211_info *cfg = wiphy_to_cfg(wiphy);
struct brcmf_p2p_info *p2p = &cfg->p2p;
......@@ -644,31 +587,16 @@ int brcmf_p2p_scan_prep(struct wiphy *wiphy,
brcmf_dbg(INFO, "P2P: GO_NEG_PHASE status cleared\n");
err = brcmf_p2p_enable_discovery(p2p);
if (err == 0)
err = brcmf_p2p_configure_probereq(p2p, request->ie,
request->ie_len);
if (err)
return err;
/*
* override .run_escan() callback.
*/
cfg->escan_info.run = brcmf_p2p_run_escan;
} else {
/*
* legacy scan trigger
* So, we have to disable p2p discovery if p2p discovery is on
*/
(void)brcmf_p2p_discover_disable_search(p2p);
vif = p2p->bss_idx[P2PAPI_BSSCFG_DEVICE].vif;
/*
* clear p2p vendor ies for probe request set by
* previous p2p related scan(s).
*/
if (p2p_discover_vif(p2p))
err = brcmf_vif_set_mgmt_ie(p2p_discover_vif(p2p),
BRCMF_VNDR_IE_PRBREQ_FLAG,
request->ie,
request->ie_len);
/* override .run_escan() callback. */
cfg->escan_info.run = brcmf_p2p_run_escan;
}
err = brcmf_vif_set_mgmt_ie(vif, BRCMF_VNDR_IE_PRBREQ_FLAG,
request->ie, request->ie_len);
return err;
}
......
......@@ -111,7 +111,8 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev);
int brcmf_p2p_start_device(struct wiphy *wiphy, struct wireless_dev *wdev);
void brcmf_p2p_stop_device(struct wiphy *wiphy, struct wireless_dev *wdev);
int brcmf_p2p_scan_prep(struct wiphy *wiphy,
struct cfg80211_scan_request *request);
struct cfg80211_scan_request *request,
struct brcmf_cfg80211_vif *vif);
int brcmf_p2p_remain_on_channel(struct wiphy *wiphy, struct wireless_dev *wdev,
struct ieee80211_channel *channel,
unsigned int duration, u64 *cookie);
......
......@@ -805,6 +805,12 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct net_device *ndev,
return -EAGAIN;
}
/* If scan req comes for p2p0, send it over primary I/F */
if (ifp->vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif) {
ifp = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif->ifp;
ndev = ifp->ndev;
}
/* Arm scan timeout timer */
mod_timer(&cfg->escan_timeout, jiffies +
WL_ESCAN_TIMER_INTERVAL_MS * HZ / 1000);
......@@ -824,7 +830,7 @@ brcmf_cfg80211_escan(struct wiphy *wiphy, struct net_device *ndev,
set_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status);
if (escan_req) {
cfg->escan_info.run = brcmf_run_escan;
err = brcmf_p2p_scan_prep(wiphy, request);
err = brcmf_p2p_scan_prep(wiphy, request, ifp->vif);
if (err)
goto scan_out;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment