Commit 0ffae60c authored by Alex Deucher's avatar Alex Deucher

drm/radeon: set speaker allocation for DCE3.2

This updates the audio driver to the speaker allocation
block from the EDID.  A similar change was just implemented
for DCE4-8.
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent ba7def4f
......@@ -283,6 +283,45 @@ void r600_audio_set_dto(struct drm_encoder *encoder, u32 clock)
}
}
static void dce3_2_afmt_write_speaker_allocation(struct drm_encoder *encoder)
{
struct radeon_device *rdev = encoder->dev->dev_private;
struct drm_connector *connector;
struct radeon_connector *radeon_connector = NULL;
u32 tmp;
u8 *sadb;
int sad_count;
list_for_each_entry(connector, &encoder->dev->mode_config.connector_list, head) {
if (connector->encoder == encoder)
radeon_connector = to_radeon_connector(connector);
}
if (!radeon_connector) {
DRM_ERROR("Couldn't find encoder's connector\n");
return;
}
sad_count = drm_edid_to_speaker_allocation(radeon_connector->edid, &sadb);
if (sad_count < 0) {
DRM_ERROR("Couldn't read Speaker Allocation Data Block: %d\n", sad_count);
return;
}
/* program the speaker allocation */
tmp = RREG32(AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER);
tmp &= ~(DP_CONNECTION | SPEAKER_ALLOCATION_MASK);
/* set HDMI mode */
tmp |= HDMI_CONNECTION;
if (sad_count)
tmp |= SPEAKER_ALLOCATION(sadb[0]);
else
tmp |= SPEAKER_ALLOCATION(5); /* stereo */
WREG32(AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER, tmp);
kfree(sadb);
}
/*
* update the info frames with the data from the current display mode
*/
......@@ -327,6 +366,9 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod
HDMI0_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */
}
if (ASIC_IS_DCE32(rdev))
dce3_2_afmt_write_speaker_allocation(encoder);
WREG32(HDMI0_ACR_PACKET_CONTROL + offset,
HDMI0_ACR_AUTO_SEND | /* allow hw to sent ACR packets when required */
HDMI0_ACR_SOURCE); /* select SW CTS value */
......
......@@ -960,6 +960,13 @@
# define DIG_MODE_SDVO 4
#define DIG1_CNTL 0x79a0
#define AZ_F0_CODEC_PIN0_CONTROL_CHANNEL_SPEAKER 0x71bc
#define SPEAKER_ALLOCATION(x) (((x) & 0x7f) << 0)
#define SPEAKER_ALLOCATION_MASK (0x7f << 0)
#define SPEAKER_ALLOCATION_SHIFT 0
#define HDMI_CONNECTION (1 << 16)
#define DP_CONNECTION (1 << 17)
/* rs6xx/rs740 and r6xx share the same HDMI blocks, however, rs6xx has only one
* instance of the blocks while r6xx has 2. DCE 3.0 cards are slightly
* different due to the new DIG blocks, but also have 2 instances.
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment