Commit 10823452 authored by Catalin Marinas's avatar Catalin Marinas Committed by Jeff Garzik

sata_sil24: Use memory barriers before issuing commands

The data in the cmd_block buffers may reach the main memory after the
writel() to the device ports. This patch introduces two calls to wmb()
to ensure the relative ordering.
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
Tested-by: default avatarColin Tuckley <colin.tuckley@arm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: default avatarJeff Garzik <jgarzik@redhat.com>
parent 14e45c15
......@@ -622,6 +622,11 @@ static int sil24_exec_polled_cmd(struct ata_port *ap, int pmp,
irq_enabled = readl(port + PORT_IRQ_ENABLE_SET);
writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR, port + PORT_IRQ_ENABLE_CLR);
/*
* The barrier is required to ensure that writes to cmd_block reach
* the memory before the write to PORT_CMD_ACTIVATE.
*/
wmb();
writel((u32)paddr, port + PORT_CMD_ACTIVATE);
writel((u64)paddr >> 32, port + PORT_CMD_ACTIVATE + 4);
......@@ -895,6 +900,11 @@ static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc)
paddr = pp->cmd_block_dma + tag * sizeof(*pp->cmd_block);
activate = port + PORT_CMD_ACTIVATE + tag * 8;
/*
* The barrier is required to ensure that writes to cmd_block reach
* the memory before the write to PORT_CMD_ACTIVATE.
*/
wmb();
writel((u32)paddr, activate);
writel((u64)paddr >> 32, activate + 4);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment