Commit 13cadb34 authored by Rajendra Nayak's avatar Rajendra Nayak Committed by Bjorn Andersson

arm64: dts: sdm845: Add OPP table for all qup devices

qup has a requirement to vote on the performance state of the CX domain
in sdm845 devices. Add OPP tables for these and also add power-domains
property for all qup instances for uart and spi.
i2c does not support scaling and uses a fixed clock.
Reviewed-by: default avatarMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: default avatarRajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: default avatarStephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1593506712-24557-2-git-send-email-rnayak@codeaurora.orgSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent a24ad487
...@@ -1090,6 +1090,25 @@ rng: rng@793000 { ...@@ -1090,6 +1090,25 @@ rng: rng@793000 {
clock-names = "core"; clock-names = "core";
}; };
qup_opp_table: qup-opp-table {
compatible = "operating-points-v2";
opp-19200000 {
opp-hz = /bits/ 64 <19200000>;
required-opps = <&rpmhpd_opp_min_svs>;
};
opp-75000000 {
opp-hz = /bits/ 64 <75000000>;
required-opps = <&rpmhpd_opp_low_svs>;
};
opp-100000000 {
opp-hz = /bits/ 64 <100000000>;
required-opps = <&rpmhpd_opp_svs>;
};
};
qupv3_id_0: geniqup@8c0000 { qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup"; compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x6000>; reg = <0 0x008c0000 0 0x6000>;
...@@ -1111,6 +1130,8 @@ i2c0: i2c@880000 { ...@@ -1111,6 +1130,8 @@ i2c0: i2c@880000 {
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1135,6 +1156,8 @@ uart0: serial@880000 { ...@@ -1135,6 +1156,8 @@ uart0: serial@880000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart0_default>; pinctrl-0 = <&qup_uart0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1148,6 +1171,8 @@ i2c1: i2c@884000 { ...@@ -1148,6 +1171,8 @@ i2c1: i2c@884000 {
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1172,6 +1197,8 @@ uart1: serial@884000 { ...@@ -1172,6 +1197,8 @@ uart1: serial@884000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart1_default>; pinctrl-0 = <&qup_uart1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1185,6 +1212,8 @@ i2c2: i2c@888000 { ...@@ -1185,6 +1212,8 @@ i2c2: i2c@888000 {
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1209,6 +1238,8 @@ uart2: serial@888000 { ...@@ -1209,6 +1238,8 @@ uart2: serial@888000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>; pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1222,6 +1253,8 @@ i2c3: i2c@88c000 { ...@@ -1222,6 +1253,8 @@ i2c3: i2c@88c000 {
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1246,6 +1279,8 @@ uart3: serial@88c000 { ...@@ -1246,6 +1279,8 @@ uart3: serial@88c000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart3_default>; pinctrl-0 = <&qup_uart3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1259,6 +1294,8 @@ i2c4: i2c@890000 { ...@@ -1259,6 +1294,8 @@ i2c4: i2c@890000 {
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1283,6 +1320,8 @@ uart4: serial@890000 { ...@@ -1283,6 +1320,8 @@ uart4: serial@890000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart4_default>; pinctrl-0 = <&qup_uart4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1296,6 +1335,8 @@ i2c5: i2c@894000 { ...@@ -1296,6 +1335,8 @@ i2c5: i2c@894000 {
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1320,6 +1361,8 @@ uart5: serial@894000 { ...@@ -1320,6 +1361,8 @@ uart5: serial@894000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart5_default>; pinctrl-0 = <&qup_uart5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1333,6 +1376,8 @@ i2c6: i2c@898000 { ...@@ -1333,6 +1376,8 @@ i2c6: i2c@898000 {
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1357,6 +1402,8 @@ uart6: serial@898000 { ...@@ -1357,6 +1402,8 @@ uart6: serial@898000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>; pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1370,6 +1417,8 @@ i2c7: i2c@89c000 { ...@@ -1370,6 +1417,8 @@ i2c7: i2c@89c000 {
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1394,6 +1443,8 @@ uart7: serial@89c000 { ...@@ -1394,6 +1443,8 @@ uart7: serial@89c000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>; pinctrl-0 = <&qup_uart7_default>;
interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
}; };
...@@ -1419,6 +1470,8 @@ i2c8: i2c@a80000 { ...@@ -1419,6 +1470,8 @@ i2c8: i2c@a80000 {
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1443,6 +1496,8 @@ uart8: serial@a80000 { ...@@ -1443,6 +1496,8 @@ uart8: serial@a80000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart8_default>; pinctrl-0 = <&qup_uart8_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1456,6 +1511,8 @@ i2c9: i2c@a84000 { ...@@ -1456,6 +1511,8 @@ i2c9: i2c@a84000 {
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1480,6 +1537,8 @@ uart9: serial@a84000 { ...@@ -1480,6 +1537,8 @@ uart9: serial@a84000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart9_default>; pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1493,6 +1552,8 @@ i2c10: i2c@a88000 { ...@@ -1493,6 +1552,8 @@ i2c10: i2c@a88000 {
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1517,6 +1578,8 @@ uart10: serial@a88000 { ...@@ -1517,6 +1578,8 @@ uart10: serial@a88000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart10_default>; pinctrl-0 = <&qup_uart10_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1530,6 +1593,8 @@ i2c11: i2c@a8c000 { ...@@ -1530,6 +1593,8 @@ i2c11: i2c@a8c000 {
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1554,6 +1619,8 @@ uart11: serial@a8c000 { ...@@ -1554,6 +1619,8 @@ uart11: serial@a8c000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart11_default>; pinctrl-0 = <&qup_uart11_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1567,6 +1634,8 @@ i2c12: i2c@a90000 { ...@@ -1567,6 +1634,8 @@ i2c12: i2c@a90000 {
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1591,6 +1660,8 @@ uart12: serial@a90000 { ...@@ -1591,6 +1660,8 @@ uart12: serial@a90000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart12_default>; pinctrl-0 = <&qup_uart12_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1604,6 +1675,8 @@ i2c13: i2c@a94000 { ...@@ -1604,6 +1675,8 @@ i2c13: i2c@a94000 {
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1628,6 +1701,8 @@ uart13: serial@a94000 { ...@@ -1628,6 +1701,8 @@ uart13: serial@a94000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart13_default>; pinctrl-0 = <&qup_uart13_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1641,6 +1716,8 @@ i2c14: i2c@a98000 { ...@@ -1641,6 +1716,8 @@ i2c14: i2c@a98000 {
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1665,6 +1742,8 @@ uart14: serial@a98000 { ...@@ -1665,6 +1742,8 @@ uart14: serial@a98000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart14_default>; pinctrl-0 = <&qup_uart14_default>;
interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1678,6 +1757,8 @@ i2c15: i2c@a9c000 { ...@@ -1678,6 +1757,8 @@ i2c15: i2c@a9c000 {
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>; #address-cells = <1>;
#size-cells = <0>; #size-cells = <0>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
...@@ -1702,6 +1783,8 @@ uart15: serial@a9c000 { ...@@ -1702,6 +1783,8 @@ uart15: serial@a9c000 {
pinctrl-names = "default"; pinctrl-names = "default";
pinctrl-0 = <&qup_uart15_default>; pinctrl-0 = <&qup_uart15_default>;
interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>; interrupts = <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&rpmhpd SDM845_CX>;
operating-points-v2 = <&qup_opp_table>;
status = "disabled"; status = "disabled";
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment