Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (36 commits)
  [POWERPC] Generic BUG for powerpc
  [PPC] Fix compile failure do to introduction of PHY_POLL
  [POWERPC] Only export __mtdcr/__mfdcr if CONFIG_PPC_DCR is set
  [POWERPC] Remove old dcr.S
  [POWERPC] Fix SPU coredump code for max_fdset removal
  [POWERPC] Fix irq routing on some 32-bit PowerMacs
  [POWERPC] ps3: Add vuart support
  [POWERPC] Support ibm,dynamic-reconfiguration-memory nodes
  [POWERPC] dont allow pSeries_probe to succeed without initialising MMU
  [POWERPC] micro optimise pSeries_probe
  [POWERPC] Add SPURR SPR to sysfs
  [POWERPC] Add DSCR SPR to sysfs
  [POWERPC] Fix 440SPe CPU table entry
  [POWERPC] Add support for FP emulation for the e300c2 core
  [POWERPC] of_device_register: propagate device_create_file return code
  [POWERPC] Fix mmap of PCI resource with hack for X
  [POWERPC] iSeries: head_64.o needs to depend on lparmap.s
  [POWERPC] cbe_thermal: Fix initialization of sysfs attribute_group
  [POWERPC] Remove QE header files from lite5200.c
  [POWERPC] of_platform_make_bus_id(): make `magic' int
  ...

arch/powerpc/Kconfig

@@ -107,6 +107,11 @@ config AUDIT_ARCH
 	bool
 	default y
 
+config GENERIC_BUG
+	bool
+	default y
+	depends on BUG
+
 config DEFAULT_UIMAGE
 	bool
 	help
@@ -478,6 +483,7 @@ config PPC_MAPLE
 	select PPC_UDBG_16550
 	select PPC_970_NAP
 	select PPC_NATIVE
+	select PPC_RTAS
 	default n
 	help
           This option enables support for the Maple 970FX Evaluation Board.
@@ -714,7 +720,7 @@ config FORCE_MAX_ZONEORDER
 
 config MATH_EMULATION
 	bool "Math emulation"
-	depends on 4xx || 8xx || E200 || E500
+	depends on 4xx || 8xx || E200 || PPC_83xx || E500
 	---help---
 	  Some PowerPC chips designed for embedded applications do not have
 	  a floating-point unit and therefore do not implement the

arch/powerpc/configs/ps3_defconfig

@@ -157,6 +157,7 @@ CONFIG_SPU_BASE=y
 CONFIG_PS3_HTAB_SIZE=20
 CONFIG_PS3_DYNAMIC_DMA=y
 CONFIG_PS3_USE_LPAR_ADDR=y
+CONFIG_PS3_VUART=y
 
 #
 # Kernel options

arch/powerpc/kernel/Makefile

@@ -77,6 +77,7 @@ endif
 
 ifeq ($(CONFIG_PPC_ISERIES),y)
 extra-y += lparmap.s
+$(obj)/head_64.o:	$(obj)/lparmap.s
 AFLAGS_head_64.o += -I$(obj)
 endif
 

arch/powerpc/kernel/cputable.c

@@ -833,7 +833,7 @@ static struct cpu_spec cpu_specs[] = {
 		.pvr_mask		= 0x7fff0000,
 		.pvr_value		= 0x00840000,
 		.cpu_name		= "e300c2",
-		.cpu_features		= CPU_FTRS_E300,
+		.cpu_features		= CPU_FTRS_E300C2,
 		.cpu_user_features	= PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,
@@ -1136,8 +1136,7 @@ static struct cpu_spec cpu_specs[] = {
 		.pvr_mask		= 0xff000fff,
 		.pvr_value		= 0x53000890,
 		.cpu_name		= "440SPe Rev. A",
-		.cpu_features		= CPU_FTR_SPLIT_ID_CACHE |
-			CPU_FTR_USE_TB,
+		.cpu_features		= CPU_FTRS_44X,
 		.cpu_user_features	= COMMON_USER_BOOKE,
 		.icache_bsize		= 32,
 		.dcache_bsize		= 32,

arch/powerpc/kernel/head_32.S

@@ -437,6 +437,13 @@ Alignment:
 /* Floating-point unavailable */
 	. = 0x800
 FPUnavailable:
+BEGIN_FTR_SECTION
+/*
+ * Certain Freescale cores don't have a FPU and treat fp instructions
+ * as a FP Unavailable exception.  Redirect to illegal/emulation handling.
+ */
+	b 	ProgramCheck
+END_FTR_SECTION_IFSET(CPU_FTR_FPU_UNAVAILABLE)
 	EXCEPTION_PROLOG
 	bne	load_up_fpu		/* if from user, just load it up */
 	addi	r3,r1,STACK_FRAME_OVERHEAD

arch/powerpc/kernel/module_32.c

@@ -23,6 +23,7 @@
 #include <linux/string.h>
 #include <linux/kernel.h>
 #include <linux/cache.h>
+#include <linux/bug.h>
 
 #include "setup.h"
 
@@ -290,23 +291,11 @@ int module_finalize(const Elf_Ehdr *hdr,
 		    struct module *me)
 {
 	const Elf_Shdr *sect;
+	int err;
 
-	me->arch.bug_table = NULL;
-	me->arch.num_bugs = 0;
-
-	/* Find the __bug_table section, if present */
-	sect = find_section(hdr, sechdrs, "__bug_table");
-	if (sect != NULL) {
-		me->arch.bug_table = (void *) sect->sh_addr;
-		me->arch.num_bugs = sect->sh_size / sizeof(struct bug_entry);
-	}
-
- 	/*
-	 * Strictly speaking this should have a spinlock to protect against
-	 * traversals, but since we only traverse on BUG()s, a spinlock
-	 * could potentially lead to deadlock and thus be counter-productive.
-	 */
-	list_add(&me->arch.bug_list, &module_bug_list);
+	err = module_bug_finalize(hdr, sechdrs, me);
+	if (err)		/* never true, currently */
+		return err;
 
 	/* Apply feature fixups */
 	sect = find_section(hdr, sechdrs, "__ftr_fixup");
@@ -320,7 +309,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 
 void module_arch_cleanup(struct module *mod)
 {
-	list_del(&mod->arch.bug_list);
+	module_bug_cleanup(mod);
 }
 
 struct bug_entry *module_find_bug(unsigned long bugaddr)

arch/powerpc/kernel/module_64.c

@@ -20,6 +20,7 @@
 #include <linux/moduleloader.h>
 #include <linux/err.h>
 #include <linux/vmalloc.h>
+#include <linux/bug.h>
 #include <asm/module.h>
 #include <asm/uaccess.h>
 #include <asm/firmware.h>
@@ -439,23 +440,11 @@ int module_finalize(const Elf_Ehdr *hdr,
 		const Elf_Shdr *sechdrs, struct module *me)
 {
 	const Elf_Shdr *sect;
+	int err;
 
-	me->arch.bug_table = NULL;
-	me->arch.num_bugs = 0;
-
-	/* Find the __bug_table section, if present */
-	sect = find_section(hdr, sechdrs, "__bug_table");
-	if (sect != NULL) {
-		me->arch.bug_table = (void *) sect->sh_addr;
-		me->arch.num_bugs = sect->sh_size / sizeof(struct bug_entry);
-	}
-
-	/*
-	 * Strictly speaking this should have a spinlock to protect against
-	 * traversals, but since we only traverse on BUG()s, a spinlock
-	 * could potentially lead to deadlock and thus be counter-productive.
-	 */
-	list_add(&me->arch.bug_list, &module_bug_list);
+	err = module_bug_finalize(hdr, sechdrs, me);
+	if (err)
+		return err;
 
 	/* Apply feature fixups */
 	sect = find_section(hdr, sechdrs, "__ftr_fixup");
@@ -475,7 +464,7 @@ int module_finalize(const Elf_Ehdr *hdr,
 
 void module_arch_cleanup(struct module *mod)
 {
-	list_del(&mod->arch.bug_list);
+	module_bug_cleanup(mod);
 }
 
 struct bug_entry *module_find_bug(unsigned long bugaddr)

arch/powerpc/kernel/of_device.c

@@ -109,9 +109,7 @@ int of_device_register(struct of_device *ofdev)
 	if (rc)
 		return rc;
 
-	device_create_file(&ofdev->dev, &dev_attr_devspec);
-
-	return 0;
+	return device_create_file(&ofdev->dev, &dev_attr_devspec);
 }
 
 void of_device_unregister(struct of_device *ofdev)

arch/powerpc/kernel/of_platform.c

@@ -169,7 +169,7 @@ static void of_platform_make_bus_id(struct of_device *dev)
 	char *name = dev->dev.bus_id;
 	const u32 *reg;
 	u64 addr;
-	long magic;
+	int magic;
 
 	/*
 	 * If it's a DCR based device, use 'd' for native DCRs

arch/powerpc/kernel/pci_32.c

@@ -736,25 +736,51 @@ scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void*
 	return NULL;
 }
 
-static int
-scan_OF_pci_childs_iterator(struct device_node* node, void* data)
+static struct device_node *scan_OF_for_pci_dev(struct device_node *parent,
+					       unsigned int devfn)
 {
-	const unsigned int *reg;
-	u8* fdata = (u8*)data;
-	
-	reg = get_property(node, "reg", NULL);
-	if (reg && ((reg[0] >> 8) & 0xff) == fdata[1]
-		&& ((reg[0] >> 16) & 0xff) == fdata[0])
-		return 1;
-	return 0;
+	struct device_node *np = NULL;
+	const u32 *reg;
+	unsigned int psize;
+
+	while ((np = of_get_next_child(parent, np)) != NULL) {
+		reg = get_property(np, "reg", &psize);
+		if (reg == NULL || psize < 4)
+			continue;
+		if (((reg[0] >> 8) & 0xff) == devfn)
+			return np;
+	}
+	return NULL;
 }
 
-static struct device_node*
-scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn)
+
+static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus)
 {
-	u8 filter_data[2] = {bus, dev_fn};
+	struct device_node *parent, *np;
+
+	/* Are we a root bus ? */
+	if (bus->self == NULL || bus->parent == NULL) {
+		struct pci_controller *hose = pci_bus_to_hose(bus->number);
+		if (hose == NULL)
+			return NULL;
+		return of_node_get(hose->arch_data);
+	}
+
+	/* not a root bus, we need to get our parent */
+	parent = scan_OF_for_pci_bus(bus->parent);
+	if (parent == NULL)
+		return NULL;
+
+	/* now iterate for children for a match */
+	np = scan_OF_for_pci_dev(parent, bus->self->devfn);
+	of_node_put(parent);
 
-	return scan_OF_pci_childs(node, scan_OF_pci_childs_iterator, filter_data);
+	/* sanity check */
+	if (strcmp(np->type, "pci") != 0)
+		printk(KERN_WARNING "pci: wrong type \"%s\" for bridge %s\n",
+		       np->type, np->full_name);
+
+	return np;
 }
 
 /*
@@ -763,43 +789,25 @@ scan_OF_childs_for_device(struct device_node* node, u8 bus, u8 dev_fn)
 struct device_node *
 pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
 {
-	struct pci_controller *hose;
-	struct device_node *node;
-	int busnr;
+	struct device_node *parent, *np;
 
 	if (!have_of)
 		return NULL;
-	
-	/* Lookup the hose */
-	busnr = bus->number;
-	hose = pci_bus_to_hose(busnr);
-	if (!hose)
-		return NULL;
 
-	/* Check it has an OF node associated */
-	node = (struct device_node *) hose->arch_data;
-	if (!node)
+	DBG("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn);
+	parent = scan_OF_for_pci_bus(bus);
+	if (parent == NULL)
 		return NULL;
-
-	/* Fixup bus number according to what OF think it is. */
-#ifdef CONFIG_PPC_PMAC
-	/* The G5 need a special case here. Basically, we don't remap all
-	 * busses on it so we don't create the pci-OF-map. However, we do
-	 * remap the AGP bus and so have to deal with it. A future better
-	 * fix has to be done by making the remapping per-host and always
-	 * filling the pci_to_OF map. --BenH
+	DBG(" parent is %s\n", parent ? parent->full_name : "<NULL>");
+	np = scan_OF_for_pci_dev(parent, devfn);
+	of_node_put(parent);
+	DBG(" result is %s\n", np ? np->full_name : "<NULL>");
+
+	/* XXX most callers don't release the returned node
+	 * mostly because ppc64 doesn't increase the refcount,
+	 * we need to fix that.
 	 */
-	if (machine_is(powermac) && busnr >= 0xf0)
-		busnr -= 0xf0;
-	else
-#endif
-	if (pci_to_OF_bus_map)
-		busnr = pci_to_OF_bus_map[busnr];
-	if (busnr == 0xff)
-		return NULL;
-	
-	/* Now, lookup childs of the hose */
-	return scan_OF_childs_for_device(node->child, busnr, devfn);
+	return np;
 }
 EXPORT_SYMBOL(pci_busdev_to_OF_node);
 
@@ -1544,7 +1552,7 @@ pci_resource_to_bus(struct pci_dev *pdev, struct resource *res)
 
 
 static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
-					       unsigned long *offset,
+					       resource_size_t *offset,
 					       enum pci_mmap_state mmap_state)
 {
 	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
@@ -1556,7 +1564,9 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
 
 	/* If memory, add on the PCI bridge address offset */
 	if (mmap_state == pci_mmap_mem) {
+#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
 		*offset += hose->pci_mem_offset;
+#endif
 		res_bit = IORESOURCE_MEM;
 	} else {
 		io_offset = hose->io_base_virt - (void __iomem *)_IO_BASE;
@@ -1624,9 +1634,6 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
 	else
 		prot |= _PAGE_GUARDED;
 
-	printk("PCI map for %s:%llx, prot: %lx\n", pci_name(dev),
-		(unsigned long long)rp->start, prot);
-
 	return __pgprot(prot);
 }
 
@@ -1695,7 +1702,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			enum pci_mmap_state mmap_state,
 			int write_combine)
 {
-	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
 	struct resource *rp;
 	int ret;
 
@@ -1808,22 +1815,42 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 			  resource_size_t *start, resource_size_t *end)
 {
 	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-	unsigned long offset = 0;
+	resource_size_t offset = 0;
 
 	if (hose == NULL)
 		return;
 
 	if (rsrc->flags & IORESOURCE_IO)
-		offset = (void __iomem *)_IO_BASE - hose->io_base_virt
-			+ hose->io_base_phys;
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+
+	/* We pass a fully fixed up address to userland for MMIO instead of
+	 * a BAR value because X is lame and expects to be able to use that
+	 * to pass to /dev/mem !
+	 *
+	 * That means that we'll have potentially 64 bits values where some
+	 * userland apps only expect 32 (like X itself since it thinks only
+	 * Sparc has 64 bits MMIO) but if we don't do that, we break it on
+	 * 32 bits CHRPs :-(
+	 *
+	 * Hopefully, the sysfs insterface is immune to that gunk. Once X
+	 * has been fixed (and the fix spread enough), we can re-enable the
+	 * 2 lines below and pass down a BAR value to userland. In that case
+	 * we'll also have to re-enable the matching code in
+	 * __pci_mmap_make_offset().
+	 *
+	 * BenH.
+	 */
+#if 0
+	else if (rsrc->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+#endif
 
-	*start = rsrc->start + offset;
-	*end = rsrc->end + offset;
+	*start = rsrc->start - offset;
+	*end = rsrc->end - offset;
 }
 
-void __init
-pci_init_resource(struct resource *res, unsigned long start, unsigned long end,
-		  int flags, char *name)
+void __init pci_init_resource(struct resource *res, resource_size_t start,
+			      resource_size_t end, int flags, char *name)
 {
 	res->start = start;
 	res->end = end;

arch/powerpc/kernel/pci_64.c

@@ -682,7 +682,7 @@ int pci_proc_domain(struct pci_bus *bus)
  * Returns negative error code on failure, zero on success.
  */
 static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
-					       unsigned long *offset,
+					       resource_size_t *offset,
 					       enum pci_mmap_state mmap_state)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
@@ -694,7 +694,9 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
 
 	/* If memory, add on the PCI bridge address offset */
 	if (mmap_state == pci_mmap_mem) {
+#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
 		*offset += hose->pci_mem_offset;
+#endif
 		res_bit = IORESOURCE_MEM;
 	} else {
 		io_offset = (unsigned long)hose->io_base_virt - pci_io_base;
@@ -762,9 +764,6 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
 	else
 		prot |= _PAGE_GUARDED;
 
-	printk(KERN_DEBUG "PCI map for %s:%lx, prot: %lx\n", pci_name(dev), rp->start,
-	       prot);
-
 	return __pgprot(prot);
 }
 
@@ -832,7 +831,7 @@ pgprot_t pci_phys_mem_access_prot(struct file *file,
 int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			enum pci_mmap_state mmap_state, int write_combine)
 {
-	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
 	struct resource *rp;
 	int ret;
 
@@ -1333,20 +1332,41 @@ EXPORT_SYMBOL(pci_read_irq_line);
 
 void pci_resource_to_user(const struct pci_dev *dev, int bar,
 			  const struct resource *rsrc,
-			  u64 *start, u64 *end)
+			  resource_size_t *start, resource_size_t *end)
 {
 	struct pci_controller *hose = pci_bus_to_host(dev->bus);
-	unsigned long offset = 0;
+	resource_size_t offset = 0;
 
 	if (hose == NULL)
 		return;
 
 	if (rsrc->flags & IORESOURCE_IO)
-		offset = pci_io_base - (unsigned long)hose->io_base_virt +
-			hose->io_base_phys;
+		offset = (unsigned long)hose->io_base_virt - pci_io_base;
+
+	/* We pass a fully fixed up address to userland for MMIO instead of
+	 * a BAR value because X is lame and expects to be able to use that
+	 * to pass to /dev/mem !
+	 *
+	 * That means that we'll have potentially 64 bits values where some
+	 * userland apps only expect 32 (like X itself since it thinks only
+	 * Sparc has 64 bits MMIO) but if we don't do that, we break it on
+	 * 32 bits CHRPs :-(
+	 *
+	 * Hopefully, the sysfs insterface is immune to that gunk. Once X
+	 * has been fixed (and the fix spread enough), we can re-enable the
+	 * 2 lines below and pass down a BAR value to userland. In that case
+	 * we'll also have to re-enable the matching code in
+	 * __pci_mmap_make_offset().
+	 *
+	 * BenH.
+	 */
+#if 0
+	else if (rsrc->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+#endif
 
-	*start = rsrc->start + offset;
-	*end = rsrc->end + offset;
+	*start = rsrc->start - offset;
+	*end = rsrc->end - offset;
 }
 
 struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)

arch/powerpc/kernel/ppc_ksyms.c

@@ -208,7 +208,7 @@ EXPORT_SYMBOL(mmu_hash_lock); /* For MOL */
 extern long *intercept_table;
 EXPORT_SYMBOL(intercept_table);
 #endif /* CONFIG_PPC_STD_MMU_32 */
-#if defined(CONFIG_40x) || defined(CONFIG_BOOKE)
+#ifdef CONFIG_PPC_DCR_NATIVE
 EXPORT_SYMBOL(__mtdcr);
 EXPORT_SYMBOL(__mfdcr);
 #endif

arch/powerpc/kernel/prom.c

@@ -804,6 +804,56 @@ static unsigned long __init dt_mem_next_cell(int s, cell_t **cellp)
 	return of_read_ulong(p, s);
 }
 
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Interpret the ibm,dynamic-memory property in the
+ * /ibm,dynamic-reconfiguration-memory node.
+ * This contains a list of memory blocks along with NUMA affinity
+ * information.
+ */
+static int __init early_init_dt_scan_drconf_memory(unsigned long node)
+{
+	cell_t *dm, *ls;
+	unsigned long l, n;
+	unsigned long base, size, lmb_size, flags;
+
+	ls = (cell_t *)of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
+	if (ls == NULL || l < dt_root_size_cells * sizeof(cell_t))
+		return 0;
+	lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls);
+
+	dm = (cell_t *)of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
+	if (dm == NULL || l < sizeof(cell_t))
+		return 0;
+
+	n = *dm++;	/* number of entries */
+	if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(cell_t))
+		return 0;
+
+	for (; n != 0; --n) {
+		base = dt_mem_next_cell(dt_root_addr_cells, &dm);
+		flags = dm[3];
+		/* skip DRC index, pad, assoc. list index, flags */
+		dm += 4;
+		/* skip this block if the reserved bit is set in flags (0x80)
+		   or if the block is not assigned to this partition (0x8) */
+		if ((flags & 0x80) || !(flags & 0x8))
+			continue;
+		size = lmb_size;
+		if (iommu_is_off) {
+			if (base >= 0x80000000ul)
+				continue;
+			if ((base + size) > 0x80000000ul)
+				size = 0x80000000ul - base;
+		}
+		lmb_add(base, size);
+	}
+	lmb_dump_all();
+	return 0;
+}
+#else
+#define early_init_dt_scan_drconf_memory(node)	0
+#endif /* CONFIG_PPC_PSERIES */
 
 static int __init early_init_dt_scan_memory(unsigned long node,
 					    const char *uname, int depth, void *data)
@@ -812,6 +862,11 @@ static int __init early_init_dt_scan_memory(unsigned long node,
 	cell_t *reg, *endp;
 	unsigned long l;
 
+	/* Look for the ibm,dynamic-reconfiguration-memory node */
+	if (depth == 1 &&
+	    strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
+		return early_init_dt_scan_drconf_memory(node);
+
 	/* We are scanning "memory" nodes only */
 	if (type == NULL) {
 		/*

arch/powerpc/kernel/prom_init.c

@@ -679,7 +679,7 @@ static unsigned char ibm_architecture_vec[] = {
 	/* option vector 5: PAPR/OF options */
 	3 - 2,				/* length */
 	0,				/* don't ignore, don't halt */
-	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES,
+	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY,
 };
 
 /* Old method - ELF header with PT_NOTE sections */

arch/powerpc/kernel/rtas.c

@@ -303,6 +303,12 @@ int rtas_token(const char *service)
 }
 EXPORT_SYMBOL(rtas_token);
 
+int rtas_service_present(const char *service)
+{
+	return rtas_token(service) != RTAS_UNKNOWN_SERVICE;
+}
+EXPORT_SYMBOL(rtas_service_present);
+
 #ifdef CONFIG_RTAS_ERROR_LOGGING
 /*
  * Return the firmware-specified size of the error log buffer
@@ -810,32 +816,6 @@ asmlinkage int ppc_rtas(struct rtas_args __user *uargs)
 	return 0;
 }
 
-#ifdef CONFIG_HOTPLUG_CPU
-/* This version can't take the spinlock, because it never returns */
-static struct rtas_args rtas_stop_self_args = {
-	/* The token is initialized for real in setup_system() */
-	.token = RTAS_UNKNOWN_SERVICE,
-	.nargs = 0,
-	.nret = 1,
-	.rets = &rtas_stop_self_args.args[0],
-};
-
-void rtas_stop_self(void)
-{
-	struct rtas_args *rtas_args = &rtas_stop_self_args;
-
-	local_irq_disable();
-
-	BUG_ON(rtas_args->token == RTAS_UNKNOWN_SERVICE);
-
-	printk("cpu %u (hwid %u) Ready to die...\n",
-	       smp_processor_id(), hard_smp_processor_id());
-	enter_rtas(__pa(rtas_args));
-
-	panic("Alas, I survived.\n");
-}
-#endif
-
 /*
  * Call early during boot, before mem init or bootmem, to retrieve the RTAS
  * informations from the device-tree and allocate the RMO buffer for userland
@@ -880,9 +860,6 @@ void __init rtas_initialize(void)
 #endif
 	rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
 
-#ifdef CONFIG_HOTPLUG_CPU
-	rtas_stop_self_args.token = rtas_token("stop-self");
-#endif /* CONFIG_HOTPLUG_CPU */
 #ifdef CONFIG_RTAS_ERROR_LOGGING
 	rtas_last_error_token = rtas_token("rtas-last-error");
 #endif

arch/powerpc/kernel/sysfs.c

@@ -181,6 +181,8 @@ SYSFS_PMCSETUP(pmc6, SPRN_PMC6);
 SYSFS_PMCSETUP(pmc7, SPRN_PMC7);
 SYSFS_PMCSETUP(pmc8, SPRN_PMC8);
 SYSFS_PMCSETUP(purr, SPRN_PURR);
+SYSFS_PMCSETUP(spurr, SPRN_SPURR);
+SYSFS_PMCSETUP(dscr, SPRN_DSCR);
 
 static SYSDEV_ATTR(mmcr0, 0600, show_mmcr0, store_mmcr0);
 static SYSDEV_ATTR(mmcr1, 0600, show_mmcr1, store_mmcr1);
@@ -194,6 +196,8 @@ static SYSDEV_ATTR(pmc6, 0600, show_pmc6, store_pmc6);
 static SYSDEV_ATTR(pmc7, 0600, show_pmc7, store_pmc7);
 static SYSDEV_ATTR(pmc8, 0600, show_pmc8, store_pmc8);
 static SYSDEV_ATTR(purr, 0600, show_purr, NULL);
+static SYSDEV_ATTR(spurr, 0600, show_spurr, NULL);
+static SYSDEV_ATTR(dscr, 0600, show_dscr, store_dscr);
 
 static void register_cpu_online(unsigned int cpu)
 {
@@ -231,6 +235,12 @@ static void register_cpu_online(unsigned int cpu)
 
 	if (cpu_has_feature(CPU_FTR_PURR))
 		sysdev_create_file(s, &attr_purr);
+
+	if (cpu_has_feature(CPU_FTR_SPURR))
+		sysdev_create_file(s, &attr_spurr);
+
+	if (cpu_has_feature(CPU_FTR_DSCR))
+		sysdev_create_file(s, &attr_dscr);
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -272,6 +282,12 @@ static void unregister_cpu_online(unsigned int cpu)
 
 	if (cpu_has_feature(CPU_FTR_PURR))
 		sysdev_remove_file(s, &attr_purr);
+
+	if (cpu_has_feature(CPU_FTR_SPURR))
+		sysdev_remove_file(s, &attr_spurr);
+
+	if (cpu_has_feature(CPU_FTR_DSCR))
+		sysdev_remove_file(s, &attr_dscr);
 }
 #endif /* CONFIG_HOTPLUG_CPU */
 

arch/powerpc/kernel/traps.c

@@ -32,6 +32,7 @@
 #include <linux/kprobes.h>
 #include <linux/kexec.h>
 #include <linux/backlight.h>
+#include <linux/bug.h>
 
 #include <asm/kdebug.h>
 #include <asm/pgtable.h>
@@ -727,54 +728,9 @@ static int emulate_instruction(struct pt_regs *regs)
 	return -EINVAL;
 }
 
-/*
- * Look through the list of trap instructions that are used for BUG(),
- * BUG_ON() and WARN_ON() and see if we hit one.  At this point we know
- * that the exception was caused by a trap instruction of some kind.
- * Returns 1 if we should continue (i.e. it was a WARN_ON) or 0
- * otherwise.
- */
-extern struct bug_entry __start___bug_table[], __stop___bug_table[];
-
-#ifndef CONFIG_MODULES
-#define module_find_bug(x)	NULL
-#endif
-
-struct bug_entry *find_bug(unsigned long bugaddr)
+int is_valid_bugaddr(unsigned long addr)
 {
-	struct bug_entry *bug;
-
-	for (bug = __start___bug_table; bug < __stop___bug_table; ++bug)
-		if (bugaddr == bug->bug_addr)
-			return bug;
-	return module_find_bug(bugaddr);
-}
-
-static int check_bug_trap(struct pt_regs *regs)
-{
-	struct bug_entry *bug;
-	unsigned long addr;
-
-	if (regs->msr & MSR_PR)
-		return 0;	/* not in kernel */
-	addr = regs->nip;	/* address of trap instruction */
-	if (addr < PAGE_OFFSET)
-		return 0;
-	bug = find_bug(regs->nip);
-	if (bug == NULL)
-		return 0;
-	if (bug->line & BUG_WARNING_TRAP) {
-		/* this is a WARN_ON rather than BUG/BUG_ON */
-		printk(KERN_ERR "Badness in %s at %s:%ld\n",
-		       bug->function, bug->file,
-		       bug->line & ~BUG_WARNING_TRAP);
-		dump_stack();
-		return 1;
-	}
-	printk(KERN_CRIT "kernel BUG in %s at %s:%ld!\n",
-	       bug->function, bug->file, bug->line);
-
-	return 0;
+	return is_kernel_addr(addr);
 }
 
 void __kprobes program_check_exception(struct pt_regs *regs)
@@ -782,6 +738,8 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 	unsigned int reason = get_reason(regs);
 	extern int do_mathemu(struct pt_regs *regs);
 
+	/* We can now get here via a FP Unavailable exception if the core
+	 * has no FPU, in that case no reason flags will be set */
 #ifdef CONFIG_MATH_EMULATION
 	/* (reason & REASON_ILLEGAL) would be the obvious thing here,
 	 * but there seems to be a hardware bug on the 405GP (RevD)
@@ -808,7 +766,9 @@ void __kprobes program_check_exception(struct pt_regs *regs)
 			return;
 		if (debugger_bpt(regs))
 			return;
-		if (check_bug_trap(regs)) {
+
+		if (!(regs->msr & MSR_PR) &&  /* not user-mode */
+		    report_bug(regs->nip) == BUG_TRAP_TYPE_WARN) {
 			regs->nip += 4;
 			return;
 		}

arch/powerpc/kernel/vmlinux.lds.S

@@ -62,11 +62,7 @@ SECTIONS
 		__stop___ex_table = .;
 	}
 
-	__bug_table : {
-		__start___bug_table = .;
-		*(__bug_table)
-		__stop___bug_table = .;
-	}
+	BUG_TABLE
 
 /*
  * Init sections discarded at runtime

arch/powerpc/mm/numa.c

@@ -295,6 +295,63 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start,
 	return lmb_end_of_DRAM() - start;
 }
 
+/*
+ * Extract NUMA information from the ibm,dynamic-reconfiguration-memory
+ * node.  This assumes n_mem_{addr,size}_cells have been set.
+ */
+static void __init parse_drconf_memory(struct device_node *memory)
+{
+	const unsigned int *lm, *dm, *aa;
+	unsigned int ls, ld, la;
+	unsigned int n, aam, aalen;
+	unsigned long lmb_size, size;
+	int nid, default_nid = 0;
+	unsigned int start, ai, flags;
+
+	lm = get_property(memory, "ibm,lmb-size", &ls);
+	dm = get_property(memory, "ibm,dynamic-memory", &ld);
+	aa = get_property(memory, "ibm,associativity-lookup-arrays", &la);
+	if (!lm || !dm || !aa ||
+	    ls < sizeof(unsigned int) || ld < sizeof(unsigned int) ||
+	    la < 2 * sizeof(unsigned int))
+		return;
+
+	lmb_size = read_n_cells(n_mem_size_cells, &lm);
+	n = *dm++;		/* number of LMBs */
+	aam = *aa++;		/* number of associativity lists */
+	aalen = *aa++;		/* length of each associativity list */
+	if (ld < (n * (n_mem_addr_cells + 4) + 1) * sizeof(unsigned int) ||
+	    la < (aam * aalen + 2) * sizeof(unsigned int))
+		return;
+
+	for (; n != 0; --n) {
+		start = read_n_cells(n_mem_addr_cells, &dm);
+		ai = dm[2];
+		flags = dm[3];
+		dm += 4;
+		/* 0x80 == reserved, 0x8 = assigned to us */
+		if ((flags & 0x80) || !(flags & 0x8))
+			continue;
+		nid = default_nid;
+		/* flags & 0x40 means associativity index is invalid */
+		if (min_common_depth > 0 && min_common_depth <= aalen &&
+		    (flags & 0x40) == 0 && ai < aam) {
+			/* this is like of_node_to_nid_single */
+			nid = aa[ai * aalen + min_common_depth - 1];
+			if (nid == 0xffff || nid >= MAX_NUMNODES)
+				nid = default_nid;
+		}
+		node_set_online(nid);
+
+		size = numa_enforce_memory_limit(start, lmb_size);
+		if (!size)
+			continue;
+
+		add_active_range(nid, start >> PAGE_SHIFT,
+				 (start >> PAGE_SHIFT) + (size >> PAGE_SHIFT));
+	}
+}
+
 static int __init parse_numa_properties(void)
 {
 	struct device_node *cpu = NULL;
@@ -385,6 +442,14 @@ static int __init parse_numa_properties(void)
 			goto new_range;
 	}
 
+	/*
+	 * Now do the same thing for each LMB listed in the ibm,dynamic-memory
+	 * property in the ibm,dynamic-reconfiguration-memory node.
+	 */
+	memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
+	if (memory)
+		parse_drconf_memory(memory);
+
 	return 0;
 }
 

arch/powerpc/platforms/52xx/lite5200.c

@@ -40,8 +40,6 @@
 #include <asm/prom.h>
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
-#include <asm/qe.h>
-#include <asm/qe_ic.h>
 #include <asm/of_platform.h>
 
 #include <asm/mpc52xx.h>

arch/powerpc/platforms/cell/cbe_thermal.c

@@ -115,6 +115,7 @@ static struct sysdev_attribute attr_spu_temperature = {
 
 static struct attribute *spu_attributes[] = {
 	&attr_spu_temperature.attr,
+	NULL,
 };
 
 static struct attribute_group spu_attribute_group = {
@@ -135,6 +136,7 @@ static struct sysdev_attribute attr_ppe_temperature1 = {
 static struct attribute *ppe_attributes[] = {
 	&attr_ppe_temperature0.attr,
 	&attr_ppe_temperature1.attr,
+	NULL,
 };
 
 static struct attribute_group ppe_attribute_group = {

arch/powerpc/platforms/cell/pmu.c

@@ -382,11 +382,14 @@ static irqreturn_t cbe_pm_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-int __init cbe_init_pm_irq(void)
+static int __init cbe_init_pm_irq(void)
 {
 	unsigned int irq;
 	int rc, node;
 
+	if (!machine_is(cell))
+		return 0;
+
 	for_each_node(node) {
 		irq = irq_create_mapping(NULL, IIC_IRQ_IOEX_PMI |
 					       (node << IIC_IRQ_NODE_SHIFT));

arch/powerpc/platforms/cell/spufs/coredump.c

@@ -147,7 +147,7 @@ static int spufs_arch_notes_size(void)
 	struct fdtable *fdt = files_fdtable(current->files);
 	int size = 0, fd;
 
-	for (fd = 0; fd < fdt->max_fdset && fd < fdt->max_fds; fd++) {
+	for (fd = 0; fd < fdt->max_fds; fd++) {
 		if (FD_ISSET(fd, fdt->open_fds)) {
 			struct file *file = fcheck(fd);
 

arch/powerpc/platforms/maple/pci.c

@@ -562,7 +562,7 @@ void __init maple_pci_init(void)
 	for (np = NULL; (np = of_get_next_child(root, np)) != NULL;) {
 		if (np->name == NULL)
 			continue;
-		if (strcmp(np->name, "pci") == 0) {
+		if (!strcmp(np->name, "pci") || !strcmp(np->name, "pcie")) {
 			if (add_bridge(np) == 0)
 				of_node_get(np);
 		}

arch/powerpc/platforms/maple/setup.c

@@ -60,6 +60,7 @@
 #include <asm/of_device.h>
 #include <asm/lmb.h>
 #include <asm/mpic.h>
+#include <asm/rtas.h>
 #include <asm/udbg.h>
 
 #include "maple.h"
@@ -166,6 +167,16 @@ struct smp_ops_t maple_smp_ops = {
 };
 #endif /* CONFIG_SMP */
 
+static void __init maple_use_rtas_reboot_and_halt_if_present(void)
+{
+	if (rtas_service_present("system-reboot") &&
+	    rtas_service_present("power-off")) {
+		ppc_md.restart = rtas_restart;
+		ppc_md.power_off = rtas_power_off;
+		ppc_md.halt = rtas_halt;
+	}
+}
+
 void __init maple_setup_arch(void)
 {
 	/* init to some ~sane value until calibrate_delay() runs */
@@ -181,6 +192,7 @@ void __init maple_setup_arch(void)
 #ifdef CONFIG_DUMMY_CONSOLE
 	conswitchp = &dummy_con;
 #endif
+	maple_use_rtas_reboot_and_halt_if_present();
 
 	printk(KERN_DEBUG "Using native/NAP idle loop\n");
 }

arch/powerpc/platforms/ps3/Kconfig

@@ -40,4 +40,15 @@ config PS3_USE_LPAR_ADDR
 
 	  If you have any doubt, choose the default y.
 
+config PS3_VUART
+	depends on PPC_PS3
+	bool "PS3 Virtual UART support"
+	default y
+	help
+	  Include support for the PS3 Virtual UART.
+
+	  This support is required for several system services
+	  including the System Manager and AV Settings.  In
+	  general, all users will say Y.
+
 endmenu

arch/powerpc/platforms/pseries/Makefile

@@ -10,6 +10,8 @@ obj-$(CONFIG_XICS)	+= xics.o
 obj-$(CONFIG_SCANLOG)	+= scanlog.o
 obj-$(CONFIG_EEH)	+= eeh.o eeh_cache.o eeh_driver.o eeh_event.o
 
+obj-$(CONFIG_HOTPLUG_CPU)	+= hotplug-cpu.o
+
 obj-$(CONFIG_HVC_CONSOLE)	+= hvconsole.o
 obj-$(CONFIG_HVCS)		+= hvcserver.o
 obj-$(CONFIG_HCALL_STATS)	+= hvCall_inst.o

arch/powerpc/platforms/pseries/eeh.c

@@ -337,6 +337,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev)
 			printk (KERN_ERR "EEH: Device driver ignored %d bad reads, panicing\n",
 			        pdn->eeh_check_count);
 			dump_stack();
+			msleep(5000);
 			
 			/* re-read the slot reset state */
 			if (read_slot_reset_state(pdn, rets) != 0)

arch/powerpc/platforms/pseries/eeh_driver.c

@@ -170,14 +170,19 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata)
 static void eeh_report_resume(struct pci_dev *dev, void *userdata)
 {
 	struct pci_driver *driver = dev->driver;
+	struct device_node *dn = pci_device_to_OF_node(dev);
 
 	dev->error_state = pci_channel_io_normal;
 
 	if (!driver)
 		return;
-	if (!driver->err_handler)
-		return;
-	if (!driver->err_handler->resume)
+
+	if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) {
+		PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED;
+		enable_irq(dev->irq);
+	}
+	if (!driver->err_handler ||
+	    !driver->err_handler->resume)
 		return;
 
 	driver->err_handler->resume(dev);
@@ -407,6 +412,8 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event)
 
 		if (rc)
 			result = PCI_ERS_RESULT_NEED_RESET;
+		else
+			result = PCI_ERS_RESULT_RECOVERED;
 	}
 
 	/* If any device has a hard failure, then shut off everything. */

arch/powerpc/platforms/pseries/hotplug-cpu.c

+/*
+ * pseries CPU Hotplug infrastructure.
+ *
+ * Split out from arch/powerpc/platforms/pseries/setup.c
+ *  arch/powerpc/kernel/rtas.c, and arch/powerpc/platforms/pseries/smp.c
+ *
+ * Peter Bergner, IBM	March 2001.
+ * Copyright (C) 2001 IBM.
+ * Dave Engebretsen, Peter Bergner, and
+ * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com
+ * Plus various changes from other IBM teams...
+ *
+ * Copyright (C) 2006 Michael Ellerman, IBM Corporation
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/cpu.h>
+#include <asm/system.h>
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/firmware.h>
+#include <asm/machdep.h>
+#include <asm/vdso_datapage.h>
+#include <asm/pSeries_reconfig.h>
+#include "xics.h"
+
+/* This version can't take the spinlock, because it never returns */
+static struct rtas_args rtas_stop_self_args = {
+	.token = RTAS_UNKNOWN_SERVICE,
+	.nargs = 0,
+	.nret = 1,
+	.rets = &rtas_stop_self_args.args[0],
+};
+
+static void rtas_stop_self(void)
+{
+	struct rtas_args *args = &rtas_stop_self_args;
+
+	local_irq_disable();
+
+	BUG_ON(args->token == RTAS_UNKNOWN_SERVICE);
+
+	printk("cpu %u (hwid %u) Ready to die...\n",
+	       smp_processor_id(), hard_smp_processor_id());
+	enter_rtas(__pa(args));
+
+	panic("Alas, I survived.\n");
+}
+
+static void pseries_mach_cpu_die(void)
+{
+	local_irq_disable();
+	idle_task_exit();
+	xics_teardown_cpu(0);
+	rtas_stop_self();
+	/* Should never get here... */
+	BUG();
+	for(;;);
+}
+
+static int qcss_tok;	/* query-cpu-stopped-state token */
+
+/* Get state of physical CPU.
+ * Return codes:
+ *	0	- The processor is in the RTAS stopped state
+ *	1	- stop-self is in progress
+ *	2	- The processor is not in the RTAS stopped state
+ *	-1	- Hardware Error
+ *	-2	- Hardware Busy, Try again later.
+ */
+static int query_cpu_stopped(unsigned int pcpu)
+{
+	int cpu_status, status;
+
+	status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
+	if (status != 0) {
+		printk(KERN_ERR
+		       "RTAS query-cpu-stopped-state failed: %i\n", status);
+		return status;
+	}
+
+	return cpu_status;
+}
+
+static int pseries_cpu_disable(void)
+{
+	int cpu = smp_processor_id();
+
+	cpu_clear(cpu, cpu_online_map);
+	vdso_data->processorCount--;
+
+	/*fix boot_cpuid here*/
+	if (cpu == boot_cpuid)
+		boot_cpuid = any_online_cpu(cpu_online_map);
+
+	/* FIXME: abstract this to not be platform specific later on */
+	xics_migrate_irqs_away();
+	return 0;
+}
+
+static void pseries_cpu_die(unsigned int cpu)
+{
+	int tries;
+	int cpu_status;
+	unsigned int pcpu = get_hard_smp_processor_id(cpu);
+
+	for (tries = 0; tries < 25; tries++) {
+		cpu_status = query_cpu_stopped(pcpu);
+		if (cpu_status == 0 || cpu_status == -1)
+			break;
+		msleep(200);
+	}
+	if (cpu_status != 0) {
+		printk("Querying DEAD? cpu %i (%i) shows %i\n",
+		       cpu, pcpu, cpu_status);
+	}
+
+	/* Isolation and deallocation are definatly done by
+	 * drslot_chrp_cpu.  If they were not they would be
+	 * done here.  Change isolate state to Isolate and
+	 * change allocation-state to Unusable.
+	 */
+	paca[cpu].cpu_start = 0;
+}
+
+/*
+ * Update cpu_present_map and paca(s) for a new cpu node.  The wrinkle
+ * here is that a cpu device node may represent up to two logical cpus
+ * in the SMT case.  We must honor the assumption in other code that
+ * the logical ids for sibling SMT threads x and y are adjacent, such
+ * that x^1 == y and y^1 == x.
+ */
+static int pseries_add_processor(struct device_node *np)
+{
+	unsigned int cpu;
+	cpumask_t candidate_map, tmp = CPU_MASK_NONE;
+	int err = -ENOSPC, len, nthreads, i;
+	const u32 *intserv;
+
+	intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
+	if (!intserv)
+		return 0;
+
+	nthreads = len / sizeof(u32);
+	for (i = 0; i < nthreads; i++)
+		cpu_set(i, tmp);
+
+	lock_cpu_hotplug();
+
+	BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map));
+
+	/* Get a bitmap of unoccupied slots. */
+	cpus_xor(candidate_map, cpu_possible_map, cpu_present_map);
+	if (cpus_empty(candidate_map)) {
+		/* If we get here, it most likely means that NR_CPUS is
+		 * less than the partition's max processors setting.
+		 */
+		printk(KERN_ERR "Cannot add cpu %s; this system configuration"
+		       " supports %d logical cpus.\n", np->full_name,
+		       cpus_weight(cpu_possible_map));
+		goto out_unlock;
+	}
+
+	while (!cpus_empty(tmp))
+		if (cpus_subset(tmp, candidate_map))
+			/* Found a range where we can insert the new cpu(s) */
+			break;
+		else
+			cpus_shift_left(tmp, tmp, nthreads);
+
+	if (cpus_empty(tmp)) {
+		printk(KERN_ERR "Unable to find space in cpu_present_map for"
+		       " processor %s with %d thread(s)\n", np->name,
+		       nthreads);
+		goto out_unlock;
+	}
+
+	for_each_cpu_mask(cpu, tmp) {
+		BUG_ON(cpu_isset(cpu, cpu_present_map));
+		cpu_set(cpu, cpu_present_map);
+		set_hard_smp_processor_id(cpu, *intserv++);
+	}
+	err = 0;
+out_unlock:
+	unlock_cpu_hotplug();
+	return err;
+}
+
+/*
+ * Update the present map for a cpu node which is going away, and set
+ * the hard id in the paca(s) to -1 to be consistent with boot time
+ * convention for non-present cpus.
+ */
+static void pseries_remove_processor(struct device_node *np)
+{
+	unsigned int cpu;
+	int len, nthreads, i;
+	const u32 *intserv;
+
+	intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
+	if (!intserv)
+		return;
+
+	nthreads = len / sizeof(u32);
+
+	lock_cpu_hotplug();
+	for (i = 0; i < nthreads; i++) {
+		for_each_present_cpu(cpu) {
+			if (get_hard_smp_processor_id(cpu) != intserv[i])
+				continue;
+			BUG_ON(cpu_online(cpu));
+			cpu_clear(cpu, cpu_present_map);
+			set_hard_smp_processor_id(cpu, -1);
+			break;
+		}
+		if (cpu == NR_CPUS)
+			printk(KERN_WARNING "Could not find cpu to remove "
+			       "with physical id 0x%x\n", intserv[i]);
+	}
+	unlock_cpu_hotplug();
+}
+
+static int pseries_smp_notifier(struct notifier_block *nb,
+				unsigned long action, void *node)
+{
+	int err = NOTIFY_OK;
+
+	switch (action) {
+	case PSERIES_RECONFIG_ADD:
+		if (pseries_add_processor(node))
+			err = NOTIFY_BAD;
+		break;
+	case PSERIES_RECONFIG_REMOVE:
+		pseries_remove_processor(node);
+		break;
+	default:
+		err = NOTIFY_DONE;
+		break;
+	}
+	return err;
+}
+
+static struct notifier_block pseries_smp_nb = {
+	.notifier_call = pseries_smp_notifier,
+};
+
+static int __init pseries_cpu_hotplug_init(void)
+{
+	rtas_stop_self_args.token = rtas_token("stop-self");
+	qcss_tok = rtas_token("query-cpu-stopped-state");
+
+	if (rtas_stop_self_args.token == RTAS_UNKNOWN_SERVICE ||
+			qcss_tok == RTAS_UNKNOWN_SERVICE) {
+		printk(KERN_INFO "CPU Hotplug not supported by firmware "
+				"- disabling.\n");
+		return 0;
+	}
+
+	ppc_md.cpu_die = pseries_mach_cpu_die;
+	smp_ops->cpu_disable = pseries_cpu_disable;
+	smp_ops->cpu_die = pseries_cpu_die;
+
+	/* Processors can be added/removed only on LPAR */
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		pSeries_reconfig_notifier_register(&pseries_smp_nb);
+
+	return 0;
+}
+arch_initcall(pseries_cpu_hotplug_init);

arch/powerpc/platforms/pseries/setup.c

@@ -347,21 +347,6 @@ static int __init pSeries_init_panel(void)
 }
 arch_initcall(pSeries_init_panel);
 
-#ifdef CONFIG_HOTPLUG_CPU
-static void pSeries_mach_cpu_die(void)
-{
-	local_irq_disable();
-	idle_task_exit();
-	xics_teardown_cpu(0);
-	rtas_stop_self();
-	/* Should never get here... */
-	BUG();
-	for(;;);
-}
-#else
-#define pSeries_mach_cpu_die NULL
-#endif
-
 static int pseries_set_dabr(unsigned long dabr)
 {
 	return plpar_hcall_norets(H_SET_DABR, dabr);
@@ -437,19 +422,14 @@ static int __init pSeries_probe_hypertas(unsigned long node,
 	if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL)
  		powerpc_firmware_features |= FW_FEATURE_LPAR;
 
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		hpte_init_lpar();
-	else
-		hpte_init_native();
-
  	return 1;
 }
 
 static int __init pSeries_probe(void)
 {
 	unsigned long root = of_get_flat_dt_root();
- 	char *dtype = of_get_flat_dt_prop(of_get_flat_dt_root(),
- 					  "device_type", NULL);
+ 	char *dtype = of_get_flat_dt_prop(root, "device_type", NULL);
+
  	if (dtype == NULL)
  		return 0;
  	if (strcmp(dtype, "chrp"))
@@ -467,6 +447,11 @@ static int __init pSeries_probe(void)
 	/* Now try to figure out if we are running on LPAR */
 	of_scan_flat_dt(pSeries_probe_hypertas, NULL);
 
+	if (firmware_has_feature(FW_FEATURE_LPAR))
+		hpte_init_lpar();
+	else
+		hpte_init_native();
+
 	DBG("Machine is%s LPAR !\n",
 	    (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");
 
@@ -561,7 +546,6 @@ define_machine(pseries) {
 	.power_off		= rtas_power_off,
 	.halt			= rtas_halt,
 	.panic			= rtas_os_term,
-	.cpu_die		= pSeries_mach_cpu_die,
 	.get_boot_time		= rtas_get_boot_time,
 	.get_rtc_time		= rtas_get_rtc_time,
 	.set_rtc_time		= rtas_set_rtc_time,

arch/powerpc/platforms/pseries/smp.c

@@ -64,197 +64,6 @@ static cpumask_t of_spin_map;
 
 extern void generic_secondary_smp_init(unsigned long);
 
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* Get state of physical CPU.
- * Return codes:
- *	0	- The processor is in the RTAS stopped state
- *	1	- stop-self is in progress
- *	2	- The processor is not in the RTAS stopped state
- *	-1	- Hardware Error
- *	-2	- Hardware Busy, Try again later.
- */
-static int query_cpu_stopped(unsigned int pcpu)
-{
-	int cpu_status;
-	int status, qcss_tok;
-
-	qcss_tok = rtas_token("query-cpu-stopped-state");
-	if (qcss_tok == RTAS_UNKNOWN_SERVICE)
-		return -1;
-	status = rtas_call(qcss_tok, 1, 2, &cpu_status, pcpu);
-	if (status != 0) {
-		printk(KERN_ERR
-		       "RTAS query-cpu-stopped-state failed: %i\n", status);
-		return status;
-	}
-
-	return cpu_status;
-}
-
-static int pSeries_cpu_disable(void)
-{
-	int cpu = smp_processor_id();
-
-	cpu_clear(cpu, cpu_online_map);
-	vdso_data->processorCount--;
-
-	/*fix boot_cpuid here*/
-	if (cpu == boot_cpuid)
-		boot_cpuid = any_online_cpu(cpu_online_map);
-
-	/* FIXME: abstract this to not be platform specific later on */
-	xics_migrate_irqs_away();
-	return 0;
-}
-
-static void pSeries_cpu_die(unsigned int cpu)
-{
-	int tries;
-	int cpu_status;
-	unsigned int pcpu = get_hard_smp_processor_id(cpu);
-
-	for (tries = 0; tries < 25; tries++) {
-		cpu_status = query_cpu_stopped(pcpu);
-		if (cpu_status == 0 || cpu_status == -1)
-			break;
-		msleep(200);
-	}
-	if (cpu_status != 0) {
-		printk("Querying DEAD? cpu %i (%i) shows %i\n",
-		       cpu, pcpu, cpu_status);
-	}
-
-	/* Isolation and deallocation are definatly done by
-	 * drslot_chrp_cpu.  If they were not they would be
-	 * done here.  Change isolate state to Isolate and
-	 * change allocation-state to Unusable.
-	 */
-	paca[cpu].cpu_start = 0;
-}
-
-/*
- * Update cpu_present_map and paca(s) for a new cpu node.  The wrinkle
- * here is that a cpu device node may represent up to two logical cpus
- * in the SMT case.  We must honor the assumption in other code that
- * the logical ids for sibling SMT threads x and y are adjacent, such
- * that x^1 == y and y^1 == x.
- */
-static int pSeries_add_processor(struct device_node *np)
-{
-	unsigned int cpu;
-	cpumask_t candidate_map, tmp = CPU_MASK_NONE;
-	int err = -ENOSPC, len, nthreads, i;
-	const u32 *intserv;
-
-	intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
-	if (!intserv)
-		return 0;
-
-	nthreads = len / sizeof(u32);
-	for (i = 0; i < nthreads; i++)
-		cpu_set(i, tmp);
-
-	lock_cpu_hotplug();
-
-	BUG_ON(!cpus_subset(cpu_present_map, cpu_possible_map));
-
-	/* Get a bitmap of unoccupied slots. */
-	cpus_xor(candidate_map, cpu_possible_map, cpu_present_map);
-	if (cpus_empty(candidate_map)) {
-		/* If we get here, it most likely means that NR_CPUS is
-		 * less than the partition's max processors setting.
-		 */
-		printk(KERN_ERR "Cannot add cpu %s; this system configuration"
-		       " supports %d logical cpus.\n", np->full_name,
-		       cpus_weight(cpu_possible_map));
-		goto out_unlock;
-	}
-
-	while (!cpus_empty(tmp))
-		if (cpus_subset(tmp, candidate_map))
-			/* Found a range where we can insert the new cpu(s) */
-			break;
-		else
-			cpus_shift_left(tmp, tmp, nthreads);
-
-	if (cpus_empty(tmp)) {
-		printk(KERN_ERR "Unable to find space in cpu_present_map for"
-		       " processor %s with %d thread(s)\n", np->name,
-		       nthreads);
-		goto out_unlock;
-	}
-
-	for_each_cpu_mask(cpu, tmp) {
-		BUG_ON(cpu_isset(cpu, cpu_present_map));
-		cpu_set(cpu, cpu_present_map);
-		set_hard_smp_processor_id(cpu, *intserv++);
-	}
-	err = 0;
-out_unlock:
-	unlock_cpu_hotplug();
-	return err;
-}
-
-/*
- * Update the present map for a cpu node which is going away, and set
- * the hard id in the paca(s) to -1 to be consistent with boot time
- * convention for non-present cpus.
- */
-static void pSeries_remove_processor(struct device_node *np)
-{
-	unsigned int cpu;
-	int len, nthreads, i;
-	const u32 *intserv;
-
-	intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len);
-	if (!intserv)
-		return;
-
-	nthreads = len / sizeof(u32);
-
-	lock_cpu_hotplug();
-	for (i = 0; i < nthreads; i++) {
-		for_each_present_cpu(cpu) {
-			if (get_hard_smp_processor_id(cpu) != intserv[i])
-				continue;
-			BUG_ON(cpu_online(cpu));
-			cpu_clear(cpu, cpu_present_map);
-			set_hard_smp_processor_id(cpu, -1);
-			break;
-		}
-		if (cpu == NR_CPUS)
-			printk(KERN_WARNING "Could not find cpu to remove "
-			       "with physical id 0x%x\n", intserv[i]);
-	}
-	unlock_cpu_hotplug();
-}
-
-static int pSeries_smp_notifier(struct notifier_block *nb, unsigned long action, void *node)
-{
-	int err = NOTIFY_OK;
-
-	switch (action) {
-	case PSERIES_RECONFIG_ADD:
-		if (pSeries_add_processor(node))
-			err = NOTIFY_BAD;
-		break;
-	case PSERIES_RECONFIG_REMOVE:
-		pSeries_remove_processor(node);
-		break;
-	default:
-		err = NOTIFY_DONE;
-		break;
-	}
-	return err;
-}
-
-static struct notifier_block pSeries_smp_nb = {
-	.notifier_call = pSeries_smp_notifier,
-};
-
-#endif /* CONFIG_HOTPLUG_CPU */
-
 /**
  * smp_startup_cpu() - start the given cpu
  *
@@ -422,15 +231,6 @@ static void __init smp_init_pseries(void)
 
 	DBG(" -> smp_init_pSeries()\n");
 
-#ifdef CONFIG_HOTPLUG_CPU
-	smp_ops->cpu_disable = pSeries_cpu_disable;
-	smp_ops->cpu_die = pSeries_cpu_die;
-
-	/* Processors can be added/removed only on LPAR */
-	if (firmware_has_feature(FW_FEATURE_LPAR))
-		pSeries_reconfig_notifier_register(&pSeries_smp_nb);
-#endif
-
 	/* Mark threads which are still spinning in hold loops. */
 	if (cpu_has_feature(CPU_FTR_SMT)) {
 		for_each_present_cpu(i) { 

arch/powerpc/sysdev/Makefile

@@ -5,7 +5,8 @@ endif
 obj-$(CONFIG_MPIC)		+= mpic.o
 obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o
 obj-$(CONFIG_PPC_MPC106)	+= grackle.o
-obj-$(CONFIG_PPC_DCR)		+= dcr.o dcr-low.o
+obj-$(CONFIG_PPC_DCR)		+= dcr.o
+obj-$(CONFIG_PPC_DCR_NATIVE)	+= dcr-low.o
 obj-$(CONFIG_U3_DART)		+= dart_iommu.o
 obj-$(CONFIG_MMIO_NVRAM)	+= mmio_nvram.o
 obj-$(CONFIG_FSL_SOC)		+= fsl_soc.o

arch/powerpc/sysdev/dcr.S

-/*
- * "Indirect" DCR access
- *
- * Copyright (c) 2004 Eugene Surovegin <ebs@ebshome.net>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under  the terms of  the GNU General Public License as published by the
- * Free Software Foundation;  either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <asm/ppc_asm.h>
-#include <asm/processor.h>
-
-#define DCR_ACCESS_PROLOG(table) \
-	rlwinm  r3,r3,4,18,27;   \
-	lis     r5,table@h;      \
-	ori     r5,r5,table@l;   \
-	add     r3,r3,r5;        \
-	mtctr   r3;              \
-	bctr
-
-_GLOBAL(__mfdcr)
-	DCR_ACCESS_PROLOG(__mfdcr_table)
-
-_GLOBAL(__mtdcr)
-	DCR_ACCESS_PROLOG(__mtdcr_table)
-
-__mfdcr_table:
-	mfdcr  r3,0; blr
-__mtdcr_table:
-	mtdcr  0,r4; blr
-
-dcr     = 1
-        .rept   1023
-	mfdcr   r3,dcr; blr
-	mtdcr   dcr,r4; blr
-	dcr     = dcr + 1
-	.endr

arch/powerpc/sysdev/qe_lib/qe_ic.c

@@ -223,23 +223,15 @@ static void qe_ic_mask_irq(unsigned int virq)
 	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
 		    temp & ~qe_ic_info[src].mask);
 
-	spin_unlock_irqrestore(&qe_ic_lock, flags);
-}
-
-static void qe_ic_mask_irq_and_ack(unsigned int virq)
-{
-	struct qe_ic *qe_ic = qe_ic_from_irq(virq);
-	unsigned int src = virq_to_hw(virq);
-	unsigned long flags;
-	u32 temp;
-
-	spin_lock_irqsave(&qe_ic_lock, flags);
-
-	temp = qe_ic_read(qe_ic->regs, qe_ic_info[src].mask_reg);
-	qe_ic_write(qe_ic->regs, qe_ic_info[src].mask_reg,
-		    temp & ~qe_ic_info[src].mask);
-
-	/* There is nothing to do for ack here, ack is handled in ISR */
+	/* Flush the above write before enabling interrupts; otherwise,
+	 * spurious interrupts will sometimes happen.  To be 100% sure
+	 * that the write has reached the device before interrupts are
+	 * enabled, the mask register would have to be read back; however,
+	 * this is not required for correctness, only to avoid wasting
+	 * time on a large number of spurious interrupts.  In testing,
+	 * a sync reduced the observed spurious interrupts to zero.
+	 */
+	mb();
 
 	spin_unlock_irqrestore(&qe_ic_lock, flags);
 }
@@ -248,7 +240,7 @@ static struct irq_chip qe_ic_irq_chip = {
 	.typename = " QEIC  ",
 	.unmask = qe_ic_unmask_irq,
 	.mask = qe_ic_mask_irq,
-	.mask_ack = qe_ic_mask_irq_and_ack,
+	.mask_ack = qe_ic_mask_irq,
 };
 
 static int qe_ic_host_match(struct irq_host *h, struct device_node *node)
@@ -331,34 +323,22 @@ unsigned int qe_ic_get_high_irq(struct qe_ic *qe_ic)
 	return irq_linear_revmap(qe_ic->irqhost, irq);
 }
 
-/* FIXME: We mask all the QE Low interrupts while handling.  We should
- * let other interrupt come in, but BAD interrupts are generated */
 void fastcall qe_ic_cascade_low(unsigned int irq, struct irq_desc *desc)
 {
 	struct qe_ic *qe_ic = desc->handler_data;
-	struct irq_chip *chip = irq_desc[irq].chip;
-
 	unsigned int cascade_irq = qe_ic_get_low_irq(qe_ic);
 
-	chip->mask_ack(irq);
 	if (cascade_irq != NO_IRQ)
 		generic_handle_irq(cascade_irq);
-	chip->unmask(irq);
 }
 
-/* FIXME: We mask all the QE High interrupts while handling.  We should
- * let other interrupt come in, but BAD interrupts are generated */
 void fastcall qe_ic_cascade_high(unsigned int irq, struct irq_desc *desc)
 {
 	struct qe_ic *qe_ic = desc->handler_data;
-	struct irq_chip *chip = irq_desc[irq].chip;
-
 	unsigned int cascade_irq = qe_ic_get_high_irq(qe_ic);
 
-	chip->mask_ack(irq);
 	if (cascade_irq != NO_IRQ)
 		generic_handle_irq(cascade_irq);
-	chip->unmask(irq);
 }
 
 void __init qe_ic_init(struct device_node *node, unsigned int flags)

arch/powerpc/sysdev/rom.c

@@ -9,6 +9,7 @@
 
 #include <linux/kernel.h>
 #include <asm/of_device.h>
+#include <asm/of_platform.h>
 
 static int __init powerpc_flash_init(void)
 {

arch/powerpc/xmon/xmon.c

@@ -22,6 +22,7 @@
 #include <linux/sysrq.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/bug.h>
 
 #include <asm/ptrace.h>
 #include <asm/string.h>
@@ -35,7 +36,6 @@
 #include <asm/cputable.h>
 #include <asm/rtas.h>
 #include <asm/sstep.h>
-#include <asm/bug.h>
 #include <asm/irq_regs.h>
 #include <asm/spu.h>
 #include <asm/spu_priv1.h>
@@ -1346,7 +1346,7 @@ static void backtrace(struct pt_regs *excp)
 
 static void print_bug_trap(struct pt_regs *regs)
 {
-	struct bug_entry *bug;
+	const struct bug_entry *bug;
 	unsigned long addr;
 
 	if (regs->msr & MSR_PR)
@@ -1357,11 +1357,11 @@ static void print_bug_trap(struct pt_regs *regs)
 	bug = find_bug(regs->nip);
 	if (bug == NULL)
 		return;
-	if (bug->line & BUG_WARNING_TRAP)
+	if (is_warning_bug(bug))
 		return;
 
-	printf("kernel BUG in %s at %s:%d!\n",
-	       bug->function, bug->file, (unsigned int)bug->line);
+	printf("kernel BUG at %s:%u!\n",
+	       bug->file, bug->line);
 }
 
 void excprint(struct pt_regs *fp)

arch/ppc/kernel/pci.c

@@ -879,7 +879,7 @@ pci_resource_to_bus(struct pci_dev *pdev, struct resource *res)
 
 
 static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
-					       unsigned long *offset,
+					       resource_size_t *offset,
 					       enum pci_mmap_state mmap_state)
 {
 	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
@@ -891,7 +891,9 @@ static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
 
 	/* If memory, add on the PCI bridge address offset */
 	if (mmap_state == pci_mmap_mem) {
+#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
 		*offset += hose->pci_mem_offset;
+#endif
 		res_bit = IORESOURCE_MEM;
 	} else {
 		io_offset = hose->io_base_virt - ___IO_BASE;
@@ -1030,7 +1032,7 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
 			enum pci_mmap_state mmap_state,
 			int write_combine)
 {
-	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
 	struct resource *rp;
 	int ret;
 
@@ -1132,21 +1134,42 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
 			  resource_size_t *start, resource_size_t *end)
 {
 	struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
-	unsigned long offset = 0;
+	resource_size_t offset = 0;
 
 	if (hose == NULL)
 		return;
 
 	if (rsrc->flags & IORESOURCE_IO)
-		offset = ___IO_BASE - hose->io_base_virt + hose->io_base_phys;
+		offset = (unsigned long)hose->io_base_virt - _IO_BASE;
+
+	/* We pass a fully fixed up address to userland for MMIO instead of
+	 * a BAR value because X is lame and expects to be able to use that
+	 * to pass to /dev/mem !
+	 *
+	 * That means that we'll have potentially 64 bits values where some
+	 * userland apps only expect 32 (like X itself since it thinks only
+	 * Sparc has 64 bits MMIO) but if we don't do that, we break it on
+	 * 32 bits CHRPs :-(
+	 *
+	 * Hopefully, the sysfs insterface is immune to that gunk. Once X
+	 * has been fixed (and the fix spread enough), we can re-enable the
+	 * 2 lines below and pass down a BAR value to userland. In that case
+	 * we'll also have to re-enable the matching code in
+	 * __pci_mmap_make_offset().
+	 *
+	 * BenH.
+	 */
+#if 0
+	else if (rsrc->flags & IORESOURCE_MEM)
+		offset = hose->pci_mem_offset;
+#endif
 
-	*start = rsrc->start + offset;
-	*end = rsrc->end + offset;
+	*start = rsrc->start - offset;
+	*end = rsrc->end - offset;
 }
 
-void __init
-pci_init_resource(struct resource *res, unsigned long start, unsigned long end,
-		  int flags, char *name)
+void __init pci_init_resource(struct resource *res, resource_size_t start,
+			      resource_size_t end, int flags, char *name)
 {
 	res->start = start;
 	res->end = end;

drivers/ps3/Makefile

 obj-y += system-bus.o
+obj-$(CONFIG_PS3_VUART) += vuart.o

drivers/ps3/vuart.h

+/*
+ *  PS3 virtual uart
+ *
+ *  Copyright (C) 2006 Sony Computer Entertainment Inc.
+ *  Copyright 2006 Sony Corp.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#if !defined(_PS3_VUART_H)
+#define _PS3_VUART_H
+
+struct ps3_vuart_stats {
+	unsigned long bytes_written;
+	unsigned long bytes_read;
+	unsigned long tx_interrupts;
+	unsigned long rx_interrupts;
+	unsigned long disconnect_interrupts;
+};
+
+/**
+ * struct ps3_vuart_port_device - a device on a vuart port
+ */
+
+struct ps3_vuart_port_device {
+	enum ps3_match_id match_id;
+	struct device core;
+
+	/* private driver variables */
+	unsigned int port_number;
+	unsigned long interrupt_mask;
+	struct {
+		spinlock_t lock;
+		struct list_head head;
+	} tx_list;
+	struct {
+		unsigned long bytes_held;
+		spinlock_t lock;
+		struct list_head head;
+	} rx_list;
+	struct ps3_vuart_stats stats;
+};
+
+/**
+ * struct ps3_vuart_port_driver - a driver for a device on a vuart port
+ */
+
+struct ps3_vuart_port_driver {
+	enum ps3_match_id match_id;
+	struct device_driver core;
+	int (*probe)(struct ps3_vuart_port_device *);
+	int (*remove)(struct ps3_vuart_port_device *);
+	int (*tx_event)(struct ps3_vuart_port_device *dev);
+	int (*rx_event)(struct ps3_vuart_port_device *dev);
+	int (*disconnect_event)(struct ps3_vuart_port_device *dev);
+	/* int (*suspend)(struct ps3_vuart_port_device *, pm_message_t); */
+	/* int (*resume)(struct ps3_vuart_port_device *); */
+};
+
+int ps3_vuart_port_device_register(struct ps3_vuart_port_device *dev);
+int ps3_vuart_port_driver_register(struct ps3_vuart_port_driver *drv);
+void ps3_vuart_port_driver_unregister(struct ps3_vuart_port_driver *drv);
+int ps3_vuart_write(struct ps3_vuart_port_device *dev,
+	const void* buf, unsigned int bytes);
+int ps3_vuart_read(struct ps3_vuart_port_device *dev, void* buf,
+	unsigned int bytes);
+static inline struct ps3_vuart_port_driver *to_ps3_vuart_port_driver(
+	struct device_driver *_drv)
+{
+	return container_of(_drv, struct ps3_vuart_port_driver, core);
+}
+static inline struct ps3_vuart_port_device *to_ps3_vuart_port_device(
+	struct device *_dev)
+{
+	return container_of(_dev, struct ps3_vuart_port_device, core);
+}
+
+int ps3_vuart_write(struct ps3_vuart_port_device *dev, const void* buf,
+	unsigned int bytes);
+int ps3_vuart_read(struct ps3_vuart_port_device *dev, void* buf,
+	unsigned int bytes);
+
+#endif

include/asm-powerpc/Kbuild

@@ -17,7 +17,6 @@ header-y += ipc.h
 header-y += poll.h
 header-y += shmparam.h
 header-y += sockios.h
-header-y += spu_info.h
 header-y += ucontext.h
 header-y += ioctl.h
 header-y += linkage.h
@@ -37,6 +36,7 @@ unifdef-y += posix_types.h
 unifdef-y += ptrace.h
 unifdef-y += seccomp.h
 unifdef-y += signal.h
+unifdef-y += spu_info.h
 unifdef-y += termios.h
 unifdef-y += types.h
 unifdef-y += unistd.h

include/asm-powerpc/bug.h

@@ -13,36 +13,39 @@
 
 #ifndef __ASSEMBLY__
 
-struct bug_entry {
-	unsigned long	bug_addr;
-	long		line;
-	const char	*file;
-	const char	*function;
-};
-
-struct bug_entry *find_bug(unsigned long bugaddr);
-
-/*
- * If this bit is set in the line number it means that the trap
- * is for WARN_ON rather than BUG or BUG_ON.
- */
-#define BUG_WARNING_TRAP	0x1000000
-
 #ifdef CONFIG_BUG
 
+/* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and
+   sizeof(struct bug_entry), respectively */
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+#define _EMIT_BUG_ENTRY				\
+	".section __bug_table,\"a\"\n"		\
+	"2:\t" PPC_LONG "1b, %0\n"		\
+	"\t.short %1, %2\n"			\
+	".org 2b+%3\n"				\
+	".previous\n"
+#else
+#define _EMIT_BUG_ENTRY				\
+	".section __bug_table,\"a\"\n"		\
+	"2:\t" PPC_LONG "1b\n"			\
+	"\t.short %2\n"				\
+	".org 2b+%3\n"				\
+	".previous\n"
+#endif
+
 /*
  * BUG_ON() and WARN_ON() do their best to cooperate with compile-time
  * optimisations. However depending on the complexity of the condition
  * some compiler versions may not produce optimal results.
  */
 
-#define BUG() do {							 \
-	__asm__ __volatile__(						 \
-		"1:	twi 31,0,0\n"					 \
-		".section __bug_table,\"a\"\n"				 \
-		"\t"PPC_LONG"	1b,%0,%1,%2\n"				 \
-		".previous"						 \
-		: : "i" (__LINE__), "i" (__FILE__), "i" (__FUNCTION__)); \
+#define BUG() do {						\
+	__asm__ __volatile__(					\
+		"1:	twi 31,0,0\n"				\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__),		\
+		    "i" (0), "i"  (sizeof(struct bug_entry)));	\
+	for(;;) ;						\
 } while (0)
 
 #define BUG_ON(x) do {						\
@@ -51,23 +54,21 @@ struct bug_entry *find_bug(unsigned long bugaddr);
 			BUG();					\
 	} else {						\
 		__asm__ __volatile__(				\
-		"1:	"PPC_TLNEI"	%0,0\n"			\
-		".section __bug_table,\"a\"\n"			\
-		"\t"PPC_LONG"	1b,%1,%2,%3\n"			\
-		".previous"					\
-		: : "r" ((long)(x)), "i" (__LINE__),		\
-		    "i" (__FILE__), "i" (__FUNCTION__));	\
+		"1:	"PPC_TLNEI"	%4,0\n"			\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__), "i" (0),	\
+		  "i" (sizeof(struct bug_entry)),		\
+		  "r" ((long)(x)));				\
 	}							\
 } while (0)
 
 #define __WARN() do {						\
 	__asm__ __volatile__(					\
 		"1:	twi 31,0,0\n"				\
-		".section __bug_table,\"a\"\n"			\
-		"\t"PPC_LONG"	1b,%0,%1,%2\n"			\
-		".previous"					\
-		: : "i" (__LINE__ + BUG_WARNING_TRAP),		\
-		    "i" (__FILE__), "i" (__FUNCTION__));	\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__),		\
+		  "i" (BUGFLAG_WARNING),			\
+		  "i" (sizeof(struct bug_entry)));		\
 } while (0)
 
 #define WARN_ON(x) ({						\
@@ -77,13 +78,12 @@ struct bug_entry *find_bug(unsigned long bugaddr);
 			__WARN();				\
 	} else {						\
 		__asm__ __volatile__(				\
-		"1:	"PPC_TLNEI"	%0,0\n"			\
-		".section __bug_table,\"a\"\n"			\
-		"\t"PPC_LONG"	1b,%1,%2,%3\n"			\
-		".previous"					\
-		: : "r" (__ret_warn_on),			\
-		    "i" (__LINE__ + BUG_WARNING_TRAP),		\
-		    "i" (__FILE__), "i" (__FUNCTION__));	\
+		"1:	"PPC_TLNEI"	%4,0\n"			\
+		_EMIT_BUG_ENTRY					\
+		: : "i" (__FILE__), "i" (__LINE__),		\
+		  "i" (BUGFLAG_WARNING),			\
+		  "i" (sizeof(struct bug_entry)),		\
+		  "r" (__ret_warn_on));				\
 	}							\
 	unlikely(__ret_warn_on);				\
 })

include/asm-powerpc/cputable.h

@@ -126,6 +126,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
 #define CPU_FTR_NODSISRALIGN		ASM_CONST(0x0000000000100000)
 #define CPU_FTR_PPC_LE			ASM_CONST(0x0000000000200000)
 #define CPU_FTR_REAL_LE			ASM_CONST(0x0000000000400000)
+#define CPU_FTR_FPU_UNAVAILABLE		ASM_CONST(0x0000000000800000)
 
 /*
  * Add the 64-bit processor unique features in the top half of the word;
@@ -152,6 +153,7 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
 #define CPU_FTR_PURR			LONG_ASM_CONST(0x0000400000000000)
 #define CPU_FTR_CELL_TB_BUG		LONG_ASM_CONST(0x0000800000000000)
 #define CPU_FTR_SPURR			LONG_ASM_CONST(0x0001000000000000)
+#define CPU_FTR_DSCR			LONG_ASM_CONST(0x0002000000000000)
 
 #ifndef __ASSEMBLY__
 
@@ -295,6 +297,9 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
 #define CPU_FTRS_E300	(CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \
 	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
 	    CPU_FTR_COMMON)
+#define CPU_FTRS_E300C2	(CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_MAYBE_CAN_DOZE | \
+	    CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
+	    CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE)
 #define CPU_FTRS_CLASSIC32	(CPU_FTR_COMMON | CPU_FTR_SPLIT_ID_CACHE | \
 	    CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE)
 #define CPU_FTRS_8XX	(CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB)
@@ -330,13 +335,14 @@ extern void do_feature_fixups(unsigned long value, void *fixup_start,
 	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
 	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
-	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE)
+	    CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
+	    CPU_FTR_DSCR)
 #define CPU_FTRS_POWER6X (CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
 	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_MMCRA | CPU_FTR_SMT | \
 	    CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
 	    CPU_FTR_PURR | CPU_FTR_CI_LARGE_PAGE | \
-	    CPU_FTR_SPURR | CPU_FTR_REAL_LE)
+	    CPU_FTR_SPURR | CPU_FTR_REAL_LE | CPU_FTR_DSCR)
 #define CPU_FTRS_CELL	(CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB | \
 	    CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
 	    CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
@@ -364,7 +370,8 @@ enum {
 	    CPU_FTRS_7450_21 | CPU_FTRS_7450_23 | CPU_FTRS_7455_1 |
 	    CPU_FTRS_7455_20 | CPU_FTRS_7455 | CPU_FTRS_7447_10 |
 	    CPU_FTRS_7447 | CPU_FTRS_7447A | CPU_FTRS_82XX |
-	    CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_CLASSIC32 |
+	    CPU_FTRS_G2_LE | CPU_FTRS_E300 | CPU_FTRS_E300C2 |
+	    CPU_FTRS_CLASSIC32 |
 #else
 	    CPU_FTRS_GENERIC_32 |
 #endif
@@ -403,7 +410,8 @@ enum {
 	    CPU_FTRS_7450_21 & CPU_FTRS_7450_23 & CPU_FTRS_7455_1 &
 	    CPU_FTRS_7455_20 & CPU_FTRS_7455 & CPU_FTRS_7447_10 &
 	    CPU_FTRS_7447 & CPU_FTRS_7447A & CPU_FTRS_82XX &
-	    CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_CLASSIC32 &
+	    CPU_FTRS_G2_LE & CPU_FTRS_E300 & CPU_FTRS_E300C2 &
+	    CPU_FTRS_CLASSIC32 &
 #else
 	    CPU_FTRS_GENERIC_32 &
 #endif

include/asm-powerpc/dcr-native.h

@@ -20,8 +20,7 @@
 #ifndef _ASM_POWERPC_DCR_NATIVE_H
 #define _ASM_POWERPC_DCR_NATIVE_H
 #ifdef __KERNEL__
-
-#include <asm/reg.h>
+#ifndef __ASSEMBLY__
 
 typedef struct {} dcr_host_t;
 
@@ -32,7 +31,41 @@ typedef struct {} dcr_host_t;
 #define dcr_read(host, dcr_n)		mfdcr(dcr_n)
 #define dcr_write(host, dcr_n, value)	mtdcr(dcr_n, value)
 
+/* Device Control Registers */
+void __mtdcr(int reg, unsigned int val);
+unsigned int __mfdcr(int reg);
+#define mfdcr(rn)						\
+	({unsigned int rval;					\
+	if (__builtin_constant_p(rn))				\
+		asm volatile("mfdcr %0," __stringify(rn)	\
+		              : "=r" (rval));			\
+	else							\
+		rval = __mfdcr(rn);				\
+	rval;})
+
+#define mtdcr(rn, v)						\
+do {								\
+	if (__builtin_constant_p(rn))				\
+		asm volatile("mtdcr " __stringify(rn) ",%0"	\
+			      : : "r" (v)); 			\
+	else							\
+		__mtdcr(rn, v);					\
+} while (0)
+
+/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
+#define mfdcri(base, reg)			\
+({						\
+	mtdcr(base ## _CFGADDR, base ## _ ## reg);	\
+	mfdcr(base ## _CFGDATA);			\
+})
+
+#define mtdcri(base, reg, data)			\
+do {						\
+	mtdcr(base ## _CFGADDR, base ## _ ## reg);	\
+	mtdcr(base ## _CFGDATA, data);		\
+} while (0)
 
+#endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_DCR_NATIVE_H */
 

include/asm-powerpc/dcr.h

@@ -20,6 +20,7 @@
 #ifndef _ASM_POWERPC_DCR_H
 #define _ASM_POWERPC_DCR_H
 #ifdef __KERNEL__
+#ifdef CONFIG_PPC_DCR
 
 #ifdef CONFIG_PPC_DCR_NATIVE
 #include <asm/dcr-native.h>
@@ -38,5 +39,6 @@ extern unsigned int dcr_resource_len(struct device_node *np,
 				     unsigned int index);
 #endif /* CONFIG_PPC_MERGE */
 
+#endif /* CONFIG_PPC_DCR */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_DCR_H */

include/asm-powerpc/hw_irq.h

@@ -107,25 +107,6 @@ static inline void local_irq_save_ptr(unsigned long *flags)
 
 #endif /* CONFIG_PPC64 */
 
-#define mask_irq(irq)						\
-	({							\
-	 	irq_desc_t *desc = get_irq_desc(irq);		\
-		if (desc->chip && desc->chip->disable)	\
-			desc->chip->disable(irq);		\
-	})
-#define unmask_irq(irq)						\
-	({							\
-	 	irq_desc_t *desc = get_irq_desc(irq);		\
-		if (desc->chip && desc->chip->enable)	\
-			desc->chip->enable(irq);		\
-	})
-#define ack_irq(irq)						\
-	({							\
-	 	irq_desc_t *desc = get_irq_desc(irq);		\
-		if (desc->chip && desc->chip->ack)	\
-			desc->chip->ack(irq);		\
-	})
-
 /*
  * interrupt-retrigger: should we handle this via lost interrupts and IPIs
  * or should we not care like we do now ? --BenH.

include/asm-powerpc/module.h

@@ -46,8 +46,6 @@ struct mod_arch_specific {
 	unsigned int num_bugs;
 };
 
-extern struct bug_entry *module_find_bug(unsigned long bugaddr);
-
 /*
  * Select ELF headers.
  * Make empty section for module_frob_arch_sections to expand.

include/asm-powerpc/pci-bridge.h

@@ -31,12 +31,12 @@ struct pci_controller {
 	int last_busno;
 
 	void __iomem *io_base_virt;
-	unsigned long io_base_phys;
+	resource_size_t io_base_phys;
 
 	/* Some machines have a non 1:1 mapping of
 	 * the PCI memory space in the CPU bus space
 	 */
-	unsigned long pci_mem_offset;
+	resource_size_t pci_mem_offset;
 	unsigned long pci_io_size;
 
 	struct pci_ops *ops;

include/asm-powerpc/pci.h

@@ -143,8 +143,13 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
 /* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
 #define HAVE_PCI_MMAP	1
 
-#ifdef CONFIG_PPC64
-/* pci_unmap_{single,page} is not a nop, thus... */
+#if defined(CONFIG_PPC64) || defined(CONFIG_NOT_COHERENT_CACHE)
+/*
+ * For 64-bit kernels, pci_unmap_{single,page} is not a nop.
+ * For 32-bit non-coherent kernels, pci_dma_sync_single_for_cpu() and
+ * so on are not nops.
+ * and thus...
+ */
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
 	dma_addr_t ADDR_NAME;
 #define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
@@ -158,6 +163,20 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
 #define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
 	(((PTR)->LEN_NAME) = (VAL))
 
+#else /* 32-bit && coherent */
+
+/* pci_unmap_{page,single} is a nop so... */
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
+#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
+#define pci_unmap_len(PTR, LEN_NAME)		(0)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
+
+#endif /* CONFIG_PPC64 || CONFIG_NOT_COHERENT_CACHE */
+
+#ifdef CONFIG_PPC64
+
 /* The PCI address space does not equal the physical memory address
  * space (we have an IOMMU).  The IDE and SCSI device layers use
  * this boolean for bounce buffer decisions.
@@ -172,16 +191,8 @@ int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
  */
 #define PCI_DMA_BUS_IS_PHYS     (1)
 
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)		(0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)	do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)		(0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
-
 #endif /* CONFIG_PPC64 */
-	
+
 extern void pcibios_resource_to_bus(struct pci_dev *dev,
 			struct pci_bus_region *region,
 			struct resource *res);

include/asm-powerpc/reg.h

@@ -143,6 +143,7 @@
 
 /* Special Purpose Registers (SPRNs)*/
 #define SPRN_CTR	0x009	/* Count Register */
+#define SPRN_DSCR	0x11
 #define SPRN_CTRLF	0x088
 #define SPRN_CTRLT	0x098
 #define   CTRL_CT	0xc0000000	/* current thread */
@@ -163,6 +164,7 @@
 #define SPRN_TBRU	0x10D	/* Time Base Read Upper Register (user, R/O) */
 #define SPRN_TBWL	0x11C	/* Time Base Lower Register (super, R/W) */
 #define SPRN_TBWU	0x11D	/* Time Base Upper Register (super, R/W) */
+#define SPRN_SPURR	0x134	/* Scaled PURR */
 #define SPRN_HIOR	0x137	/* 970 Hypervisor interrupt offset */
 #define SPRN_DBAT0L	0x219	/* Data BAT 0 Lower Register */
 #define SPRN_DBAT0U	0x218	/* Data BAT 0 Upper Register */

include/asm-powerpc/rtas.h

@@ -159,6 +159,7 @@ extern struct rtas_t rtas;
 
 extern void enter_rtas(unsigned long);
 extern int rtas_token(const char *service);
+extern int rtas_service_present(const char *service);
 extern int rtas_call(int token, int, int, int *, ...);
 extern void rtas_restart(char *cmd);
 extern void rtas_power_off(void);
@@ -221,8 +222,6 @@ extern int rtas_get_error_log_max(void);
 extern spinlock_t rtas_data_buf_lock;
 extern char rtas_data_buf[RTAS_DATA_BUF_SIZE];
 
-extern void rtas_stop_self(void);
-
 /* RMO buffer reserved for user-space RTAS use */
 extern unsigned long rtas_rmo_buf;
 

include/asm-ppc/pci-bridge.h

@@ -20,8 +20,8 @@ extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
 extern struct pci_controller* pcibios_alloc_controller(void);
 
 /* Helper function for setting up resources */
-extern void pci_init_resource(struct resource *res, unsigned long start,
-			      unsigned long end, int flags, char *name);
+extern void pci_init_resource(struct resource *res, resource_size_t start,
+			      resource_size_t end, int flags, char *name);
 
 /* Get the PCI host controller for a bus */
 extern struct pci_controller* pci_bus_to_hose(int bus);
@@ -50,12 +50,12 @@ struct pci_controller {
 	int bus_offset;
 
 	void __iomem *io_base_virt;
-	unsigned long io_base_phys;
+	resource_size_t io_base_phys;
 
 	/* Some machines (PReP) have a non 1:1 mapping of
 	 * the PCI memory space in the CPU bus space
 	 */
-	unsigned long pci_mem_offset;
+	resource_size_t pci_mem_offset;
 
 	struct pci_ops *ops;
 	volatile unsigned int __iomem *cfg_addr;

include/asm-ppc/pci.h

@@ -61,6 +61,27 @@ extern unsigned long pci_bus_to_phys(unsigned int ba, int busnr);
  */
 #define PCI_DMA_BUS_IS_PHYS     (1)
 
+#ifdef CONFIG_NOT_COHERENT_CACHE
+/*
+ * pci_unmap_{page,single} are NOPs but pci_dma_sync_single_for_cpu()
+ * and so on are not, so...
+ */
+
+#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)	\
+	dma_addr_t ADDR_NAME;
+#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)		\
+	__u32 LEN_NAME;
+#define pci_unmap_addr(PTR, ADDR_NAME)			\
+	((PTR)->ADDR_NAME)
+#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)		\
+	(((PTR)->ADDR_NAME) = (VAL))
+#define pci_unmap_len(PTR, LEN_NAME)			\
+	((PTR)->LEN_NAME)
+#define pci_unmap_len_set(PTR, LEN_NAME, VAL)		\
+	(((PTR)->LEN_NAME) = (VAL))
+
+#else /* coherent */
+
 /* pci_unmap_{page,single} is a nop so... */
 #define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
 #define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
@@ -69,6 +90,8 @@ extern unsigned long pci_bus_to_phys(unsigned int ba, int busnr);
 #define pci_unmap_len(PTR, LEN_NAME)		(0)
 #define pci_unmap_len_set(PTR, LEN_NAME, VAL)	do { } while (0)
 
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+
 #ifdef CONFIG_PCI
 static inline void pci_dma_burst_advice(struct pci_dev *pdev,
 					enum pci_dma_burst_strategy *strat,

include/asm-ppc/reg_booke.h

@@ -9,41 +9,9 @@
 #ifndef __ASM_PPC_REG_BOOKE_H__
 #define __ASM_PPC_REG_BOOKE_H__
 
-#ifndef __ASSEMBLY__
-/* Device Control Registers */
-void __mtdcr(int reg, unsigned int val);
-unsigned int __mfdcr(int reg);
-#define mfdcr(rn)						\
-	({unsigned int rval;					\
-	if (__builtin_constant_p(rn))				\
-		asm volatile("mfdcr %0," __stringify(rn)	\
-		              : "=r" (rval));			\
-	else							\
-		rval = __mfdcr(rn);				\
-	rval;})
-
-#define mtdcr(rn, v)						\
-do {								\
-	if (__builtin_constant_p(rn))				\
-		asm volatile("mtdcr " __stringify(rn) ",%0"	\
-			      : : "r" (v)); 			\
-	else							\
-		__mtdcr(rn, v);					\
-} while (0)
-
-/* R/W of indirect DCRs make use of standard naming conventions for DCRs */
-#define mfdcri(base, reg)			\
-({						\
-	mtdcr(base ## _CFGADDR, base ## _ ## reg);	\
-	mfdcr(base ## _CFGDATA);			\
-})
-
-#define mtdcri(base, reg, data)			\
-do {						\
-	mtdcr(base ## _CFGADDR, base ## _ ## reg);	\
-	mtdcr(base ## _CFGDATA, data);		\
-} while (0)
+#include <asm/dcr.h>
 
+#ifndef __ASSEMBLY__
 /* Performance Monitor Registers */
 #define mfpmr(rn)	({unsigned int rval; \
 			asm volatile("mfpmr %0," __stringify(rn) \

include/linux/fsl_devices.h

@@ -19,6 +19,7 @@
 #define _FSL_DEVICE_H_
 
 #include <linux/types.h>
+#include <linux/phy.h>
 
 /*
  * Some conventions on how we handle peripherals on Freescale chips