Merge tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev fixes from Tomi Valkeinen:
 - fix omap2plus_defconfig to enable omapfb as it was in v4.4
 - ocfb: fix timings for margins
 - s6e8ax0, da8xx-fb: fix compile warnings
 - mmp: fix build failure caused by bad printk parameters
 - imxfb: fix clock issue which kept the display off

* tag 'fbdev-fixes-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: fbdev: imxfb: Provide a reset mechanism
  fbdev: mmp: print IRQ resource using %pR format string
  fbdev: da8xx-fb: remove incorrect type cast
  fbdev: s6e8ax0: avoid unused function warnings
  ocfb: fix tgdel and tvdel timing parameters
  ARM: omap2plus_defconfig: update display configs

arch/arm/configs/omap2plus_defconfig

@@ -292,24 +292,23 @@ CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
-CONFIG_OMAP2_DSS=m
-CONFIG_OMAP5_DSS_HDMI=y
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_DSI=y
+CONFIG_FB_OMAP5_DSS_HDMI=y
+CONFIG_FB_OMAP2_DSS_SDI=y
+CONFIG_FB_OMAP2_DSS_DSI=y
 CONFIG_FB_OMAP2=m
-CONFIG_DISPLAY_ENCODER_TFP410=m
-CONFIG_DISPLAY_ENCODER_TPD12S015=m
-CONFIG_DISPLAY_CONNECTOR_DVI=m
-CONFIG_DISPLAY_CONNECTOR_HDMI=m
-CONFIG_DISPLAY_CONNECTOR_ANALOG_TV=m
-CONFIG_DISPLAY_PANEL_DPI=m
-CONFIG_DISPLAY_PANEL_DSI_CM=m
-CONFIG_DISPLAY_PANEL_SONY_ACX565AKM=m
-CONFIG_DISPLAY_PANEL_LGPHILIPS_LB035Q02=m
-CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=m
-CONFIG_DISPLAY_PANEL_TPO_TD028TTEC1=m
-CONFIG_DISPLAY_PANEL_TPO_TD043MTEA1=m
-CONFIG_DISPLAY_PANEL_NEC_NL8048HL11=m
+CONFIG_FB_OMAP2_ENCODER_TFP410=m
+CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
+CONFIG_FB_OMAP2_CONNECTOR_DVI=m
+CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
+CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
+CONFIG_FB_OMAP2_PANEL_DPI=m
+CONFIG_FB_OMAP2_PANEL_DSI_CM=m
+CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
+CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
+CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
+CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
+CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
+CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_PLATFORM=y

drivers/video/fbdev/da8xx-fb.c

@@ -152,7 +152,7 @@ static void lcdc_write(unsigned int val, unsigned int addr)
 
 struct da8xx_fb_par {
 	struct device		*dev;
-	resource_size_t p_palette_base;
+	dma_addr_t		p_palette_base;
 	unsigned char *v_palette_base;
 	dma_addr_t		vram_phys;
 	unsigned long		vram_size;
@@ -1428,7 +1428,7 @@ static int fb_probe(struct platform_device *device)
 
 	par->vram_virt = dma_alloc_coherent(NULL,
 					    par->vram_size,
-					    (resource_size_t *) &par->vram_phys,
+					    &par->vram_phys,
 					    GFP_KERNEL | GFP_DMA);
 	if (!par->vram_virt) {
 		dev_err(&device->dev,
@@ -1448,7 +1448,7 @@ static int fb_probe(struct platform_device *device)
 
 	/* allocate palette buffer */
 	par->v_palette_base = dma_zalloc_coherent(NULL, PALETTE_SIZE,
-						  (resource_size_t *)&par->p_palette_base,
+						  &par->p_palette_base,
 						  GFP_KERNEL | GFP_DMA);
 	if (!par->v_palette_base) {
 		dev_err(&device->dev,

drivers/video/fbdev/exynos/s6e8ax0.c

@@ -829,8 +829,7 @@ static int s6e8ax0_probe(struct mipi_dsim_lcd_device *dsim_dev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int s6e8ax0_suspend(struct mipi_dsim_lcd_device *dsim_dev)
+static int __maybe_unused s6e8ax0_suspend(struct mipi_dsim_lcd_device *dsim_dev)
 {
 	struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
 
@@ -843,7 +842,7 @@ static int s6e8ax0_suspend(struct mipi_dsim_lcd_device *dsim_dev)
 	return 0;
 }
 
-static int s6e8ax0_resume(struct mipi_dsim_lcd_device *dsim_dev)
+static int __maybe_unused s6e8ax0_resume(struct mipi_dsim_lcd_device *dsim_dev)
 {
 	struct s6e8ax0 *lcd = dev_get_drvdata(&dsim_dev->dev);
 
@@ -855,10 +854,6 @@ static int s6e8ax0_resume(struct mipi_dsim_lcd_device *dsim_dev)
 
 	return 0;
 }
-#else
-#define s6e8ax0_suspend		NULL
-#define s6e8ax0_resume		NULL
-#endif
 
 static struct mipi_dsim_lcd_driver s6e8ax0_dsim_ddi_driver = {
 	.name = "s6e8ax0",
@@ -867,8 +862,8 @@ static struct mipi_dsim_lcd_driver s6e8ax0_dsim_ddi_driver = {
 	.power_on = s6e8ax0_power_on,
 	.set_sequence = s6e8ax0_set_sequence,
 	.probe = s6e8ax0_probe,
-	.suspend = s6e8ax0_suspend,
-	.resume = s6e8ax0_resume,
+	.suspend = IS_ENABLED(CONFIG_PM) ? s6e8ax0_suspend : NULL,
+	.resume = IS_ENABLED(CONFIG_PM) ? s6e8ax0_resume : NULL,
 };
 
 static int s6e8ax0_init(void)

drivers/video/fbdev/imxfb.c

@@ -902,6 +902,21 @@ static int imxfb_probe(struct platform_device *pdev)
 		goto failed_getclock;
 	}
 
+	/*
+	 * The LCDC controller does not have an enable bit. The
+	 * controller starts directly when the clocks are enabled.
+	 * If the clocks are enabled when the controller is not yet
+	 * programmed with proper register values (enabled at the
+	 * bootloader, for example) then it just goes into some undefined
+	 * state.
+	 * To avoid this issue, let's enable and disable LCDC IPG clock
+	 * so that we force some kind of 'reset' to the LCDC block.
+	 */
+	ret = clk_prepare_enable(fbi->clk_ipg);
+	if (ret)
+		goto failed_getclock;
+	clk_disable_unprepare(fbi->clk_ipg);
+
 	fbi->clk_ahb = devm_clk_get(&pdev->dev, "ahb");
 	if (IS_ERR(fbi->clk_ahb)) {
 		ret = PTR_ERR(fbi->clk_ahb);

drivers/video/fbdev/mmp/hw/mmp_ctrl.c

@@ -503,8 +503,7 @@ static int mmphw_probe(struct platform_device *pdev)
 	ctrl->reg_base = devm_ioremap_nocache(ctrl->dev,
 			res->start, resource_size(res));
 	if (ctrl->reg_base == NULL) {
-		dev_err(ctrl->dev, "%s: res %x - %x map failed\n", __func__,
-			res->start, res->end);
+		dev_err(ctrl->dev, "%s: res %pR map failed\n", __func__, res);
 		ret = -ENOMEM;
 		goto failed;
 	}

drivers/video/fbdev/ocfb.c

@@ -123,11 +123,11 @@ static int ocfb_setupfb(struct ocfb_dev *fbdev)
 
 	/* Horizontal timings */
 	ocfb_writereg(fbdev, OCFB_HTIM, (var->hsync_len - 1) << 24 |
-		      (var->right_margin - 1) << 16 | (var->xres - 1));
+		      (var->left_margin - 1) << 16 | (var->xres - 1));
 
 	/* Vertical timings */
 	ocfb_writereg(fbdev, OCFB_VTIM, (var->vsync_len - 1) << 24 |
-		      (var->lower_margin - 1) << 16 | (var->yres - 1));
+		      (var->upper_margin - 1) << 16 | (var->yres - 1));
 
 	/* Total length of frame */
 	hlen = var->left_margin + var->right_margin + var->hsync_len +