Commit 16287557 authored by Stephen Hemminger's avatar Stephen Hemminger Committed by Jeff Garzik

[PATCH] sk98lin: error handling on probe

The sk98lin driver doesn't do proper error number handling
during initialization. Note: -EAGAIN is a bogus return value for
hardware errors.
Signed-off-by: default avatarStephen Hemminger <shemminger@osdl.org>
Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
parent 26fc3549
......@@ -530,7 +530,7 @@ SK_BOOL DualNet;
if (SkGeInit(pAC, pAC->IoBase, SK_INIT_DATA) != 0) {
printk("HWInit (0) failed.\n");
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
return(-EAGAIN);
return -EIO;
}
SkI2cInit( pAC, pAC->IoBase, SK_INIT_DATA);
SkEventInit(pAC, pAC->IoBase, SK_INIT_DATA);
......@@ -552,7 +552,7 @@ SK_BOOL DualNet;
if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) {
printk("sk98lin: HWInit (1) failed.\n");
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
return(-EAGAIN);
return -EIO;
}
SkI2cInit( pAC, pAC->IoBase, SK_INIT_IO);
SkEventInit(pAC, pAC->IoBase, SK_INIT_IO);
......@@ -584,20 +584,20 @@ SK_BOOL DualNet;
} else {
printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n",
pAC->GIni.GIMacsFound);
return -EAGAIN;
return -EIO;
}
if (Ret) {
printk(KERN_WARNING "sk98lin: Requested IRQ %d is busy.\n",
dev->irq);
return -EAGAIN;
return Ret;
}
pAC->AllocFlag |= SK_ALLOC_IRQ;
/* Alloc memory for this board (Mem for RxD/TxD) : */
if(!BoardAllocMem(pAC)) {
printk("No memory for descriptor rings.\n");
return(-EAGAIN);
return -ENOMEM;
}
BoardInitMem(pAC);
......@@ -613,7 +613,7 @@ SK_BOOL DualNet;
DualNet)) {
BoardFreeMem(pAC);
printk("sk98lin: SkGeInitAssignRamToQueues failed.\n");
return(-EAGAIN);
return -EIO;
}
return (0);
......@@ -4800,8 +4800,10 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
}
}
if ((dev = alloc_etherdev(sizeof(DEV_NET))) == NULL) {
printk(KERN_ERR "Unable to allocate etherdev "
error = -ENOMEM;
dev = alloc_etherdev(sizeof(DEV_NET));
if (!dev) {
printk(KERN_ERR "sk98lin: unable to allocate etherdev "
"structure!\n");
goto out_disable_device;
}
......@@ -4809,7 +4811,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
pNet = netdev_priv(dev);
pNet->pAC = kzalloc(sizeof(SK_AC), GFP_KERNEL);
if (!pNet->pAC) {
printk(KERN_ERR "Unable to allocate adapter "
printk(KERN_ERR "sk98lin: unable to allocate adapter "
"structure!\n");
goto out_free_netdev;
}
......@@ -4822,6 +4824,7 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
pAC->CheckQueue = SK_FALSE;
dev->irq = pdev->irq;
error = SkGeInitPCI(pAC);
if (error) {
printk(KERN_ERR "sk98lin: PCI setup failed: %i\n", error);
......@@ -4861,17 +4864,20 @@ static int __devinit skge_probe_one(struct pci_dev *pdev,
pAC->Index = boards_found++;
if (SkGeBoardInit(dev, pAC))
error = SkGeBoardInit(dev, pAC);
if (error)
goto out_free_netdev;
/* Read Adapter name from VPD */
if (ProductStr(pAC, DeviceStr, sizeof(DeviceStr)) != 0) {
error = -EIO;
printk(KERN_ERR "sk98lin: Could not read VPD data.\n");
goto out_free_resources;
}
/* Register net device */
if (register_netdev(dev)) {
error = register_netdev(dev);
if (error) {
printk(KERN_ERR "sk98lin: Could not register device.\n");
goto out_free_resources;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment