brcmfmac: set F2 blocksize and watermark for 4359

Set F2 blocksize to 256 bytes and watermark to 0x40 for 4359. Also
enable and configure F1 MesBusyCtrl. It fixes DMA error while having
UDP bi-directional traffic.
Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
[slightly adapted for rebase on mainline linux]
Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c

@@ -43,6 +43,7 @@
 
 #define SDIO_FUNC1_BLOCKSIZE		64
 #define SDIO_FUNC2_BLOCKSIZE		512
+#define SDIO_4359_FUNC2_BLOCKSIZE	256
 /* Maximum milliseconds to wait for F2 to come up */
 #define SDIO_WAIT_F2RDY	3000
 
@@ -903,6 +904,7 @@ static void brcmf_sdiod_host_fixup(struct mmc_host *host)
 static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 {
 	int ret = 0;
+	unsigned int f2_blksz = SDIO_FUNC2_BLOCKSIZE;
 
 	sdio_claim_host(sdiodev->func1);
 
@@ -912,7 +914,9 @@ static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 		sdio_release_host(sdiodev->func1);
 		goto out;
 	}
-	ret = sdio_set_block_size(sdiodev->func2, SDIO_FUNC2_BLOCKSIZE);
+	if (sdiodev->func2->device == SDIO_DEVICE_ID_BROADCOM_4359)
+		f2_blksz = SDIO_4359_FUNC2_BLOCKSIZE;
+	ret = sdio_set_block_size(sdiodev->func2, f2_blksz);
 	if (ret) {
 		brcmf_err("Failed to set F2 blocksize\n");
 		sdio_release_host(sdiodev->func1);

drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c

@@ -42,6 +42,8 @@
 #define DEFAULT_F2_WATERMARK    0x8
 #define CY_4373_F2_WATERMARK    0x40
 #define CY_43012_F2_WATERMARK    0x60
+#define CY_4359_F2_WATERMARK	0x40
+#define CY_4359_F1_MESBUSYCTRL	(CY_4359_F2_WATERMARK | SBSDIO_MESBUSYCTRL_ENAB)
 
 #ifdef DEBUG
 
@@ -4206,6 +4208,19 @@ static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
 					   &err);
 			break;
+		case SDIO_DEVICE_ID_BROADCOM_4359:
+			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",
+				  CY_4359_F2_WATERMARK);
+			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
+					   CY_4359_F2_WATERMARK, &err);
+			devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL,
+						   &err);
+			devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
+			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
+					   &err);
+			brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL,
+					   CY_4359_F1_MESBUSYCTRL, &err);
+			break;
 		default:
 			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
 					   DEFAULT_F2_WATERMARK, &err);