Commit 17a0184c authored by Johan Hovold's avatar Johan Hovold

USB: serial: ir-usb: fix link-speed handling

Commit e0d795e4 ("usb: irda: cleanup on ir-usb module") added a USB
IrDA header with common defines, but mistakingly switched to using the
class-descriptor baud-rate bitmask values for the outbound header.

This broke link-speed handling for rates above 9600 baud, but a device
would also be able to operate at the default 9600 baud until a
link-speed request was issued (e.g. using the TCGETS ioctl).

Fixes: e0d795e4 ("usb: irda: cleanup on ir-usb module")
Cc: stable <stable@vger.kernel.org>     # 2.6.27
Cc: Felipe Balbi <balbi@kernel.org>
Reviewed-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarJohan Hovold <johan@kernel.org>
parent 2988a8ae
......@@ -335,34 +335,34 @@ static void ir_set_termios(struct tty_struct *tty,
switch (baud) {
case 2400:
ir_baud = USB_IRDA_BR_2400;
ir_baud = USB_IRDA_LS_2400;
break;
case 9600:
ir_baud = USB_IRDA_BR_9600;
ir_baud = USB_IRDA_LS_9600;
break;
case 19200:
ir_baud = USB_IRDA_BR_19200;
ir_baud = USB_IRDA_LS_19200;
break;
case 38400:
ir_baud = USB_IRDA_BR_38400;
ir_baud = USB_IRDA_LS_38400;
break;
case 57600:
ir_baud = USB_IRDA_BR_57600;
ir_baud = USB_IRDA_LS_57600;
break;
case 115200:
ir_baud = USB_IRDA_BR_115200;
ir_baud = USB_IRDA_LS_115200;
break;
case 576000:
ir_baud = USB_IRDA_BR_576000;
ir_baud = USB_IRDA_LS_576000;
break;
case 1152000:
ir_baud = USB_IRDA_BR_1152000;
ir_baud = USB_IRDA_LS_1152000;
break;
case 4000000:
ir_baud = USB_IRDA_BR_4000000;
ir_baud = USB_IRDA_LS_4000000;
break;
default:
ir_baud = USB_IRDA_BR_9600;
ir_baud = USB_IRDA_LS_9600;
baud = 9600;
}
......
......@@ -119,11 +119,22 @@ struct usb_irda_cs_descriptor {
* 6 - 115200 bps
* 7 - 576000 bps
* 8 - 1.152 Mbps
* 9 - 5 mbps
* 9 - 4 Mbps
* 10..15 - Reserved
*/
#define USB_IRDA_STATUS_LINK_SPEED 0x0f
#define USB_IRDA_LS_NO_CHANGE 0
#define USB_IRDA_LS_2400 1
#define USB_IRDA_LS_9600 2
#define USB_IRDA_LS_19200 3
#define USB_IRDA_LS_38400 4
#define USB_IRDA_LS_57600 5
#define USB_IRDA_LS_115200 6
#define USB_IRDA_LS_576000 7
#define USB_IRDA_LS_1152000 8
#define USB_IRDA_LS_4000000 9
/* The following is a 4-bit value used only for
* outbound header:
*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment