Merge tag 'for-5.6-clk' of...

Merge tag 'for-5.6-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-nvidia

Pull Nvidia Tegra clk driver updates from Thierry Reding

* tag 'for-5.6-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  clk: tegra20/30: Explicitly set parent clock for Video Decoder
  clk: tegra20/30: Don't pre-initialize displays parent clock
  clk: tegra: divider: Check UART's divider enable-bit state on rate's recalculation
  clk: tegra: clk-dfll: Remove call to pm_runtime_irq_safe()
  clk: tegra: Mark fuse clock as critical

drivers/clk/tegra/clk-dfll.c

@@ -1487,7 +1487,6 @@ static int dfll_init(struct tegra_dfll *td)
 	td->last_unrounded_rate = 0;
 
 	pm_runtime_enable(td->dev);
-	pm_runtime_irq_safe(td->dev);
 	pm_runtime_get_sync(td->dev);
 
 	dfll_set_mode(td, DFLL_DISABLED);
@@ -1516,7 +1515,7 @@ static int dfll_init(struct tegra_dfll *td)
 
 /**
  * tegra_dfll_suspend - check DFLL is disabled
- * @dev: DFLL device *
+ * @dev: DFLL instance
  *
  * DFLL clock should be disabled by the CPUFreq driver. So, make
  * sure it is disabled and disable all clocks needed by the DFLL.

drivers/clk/tegra/clk-divider.c

@@ -40,8 +40,13 @@ static unsigned long clk_frac_div_recalc_rate(struct clk_hw *hw,
 	int div, mul;
 	u64 rate = parent_rate;
 
-	reg = readl_relaxed(divider->reg) >> divider->shift;
-	div = reg & div_mask(divider);
+	reg = readl_relaxed(divider->reg);
+
+	if ((divider->flags & TEGRA_DIVIDER_UART) &&
+	    !(reg & PERIPH_CLK_UART_DIV_ENB))
+		return rate;
+
+	div = (reg >> divider->shift) & div_mask(divider);
 
 	mul = get_mul(divider);
 	div += mul;

drivers/clk/tegra/clk-tegra-periph.c

@@ -777,7 +777,11 @@ static struct tegra_periph_init_data gate_clks[] = {
 	GATE("ahbdma", "hclk", 33, 0, tegra_clk_ahbdma, 0),
 	GATE("apbdma", "pclk", 34, 0, tegra_clk_apbdma, 0),
 	GATE("kbc", "clk_32k", 36, TEGRA_PERIPH_ON_APB | TEGRA_PERIPH_NO_RESET, tegra_clk_kbc, 0),
-	GATE("fuse", "clk_m", 39, TEGRA_PERIPH_ON_APB, tegra_clk_fuse, 0),
+	/*
+	 * Critical for RAM re-repair operation, which must occur on resume
+	 * from LP1 system suspend and as part of CCPLEX cluster switching.
+	 */
+	GATE("fuse", "clk_m", 39, TEGRA_PERIPH_ON_APB, tegra_clk_fuse, CLK_IS_CRITICAL),
 	GATE("fuse_burn", "clk_m", 39, TEGRA_PERIPH_ON_APB, tegra_clk_fuse_burn, 0),
 	GATE("kfuse", "clk_m", 40, TEGRA_PERIPH_ON_APB, tegra_clk_kfuse, 0),
 	GATE("apbif", "clk_m", 107, TEGRA_PERIPH_ON_APB, tegra_clk_apbif, 0),

drivers/clk/tegra/clk-tegra20.c

@@ -1046,11 +1046,9 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA20_CLK_SBC3, TEGRA20_CLK_PLL_P, 100000000, 0 },
 	{ TEGRA20_CLK_SBC4, TEGRA20_CLK_PLL_P, 100000000, 0 },
 	{ TEGRA20_CLK_HOST1X, TEGRA20_CLK_PLL_C, 150000000, 0 },
-	{ TEGRA20_CLK_DISP1, TEGRA20_CLK_PLL_P, 600000000, 0 },
-	{ TEGRA20_CLK_DISP2, TEGRA20_CLK_PLL_P, 600000000, 0 },
 	{ TEGRA20_CLK_GR2D, TEGRA20_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA20_CLK_GR3D, TEGRA20_CLK_PLL_C, 300000000, 0 },
-	{ TEGRA20_CLK_VDE, TEGRA20_CLK_CLK_MAX, 300000000, 0 },
+	{ TEGRA20_CLK_VDE, TEGRA20_CLK_PLL_C, 300000000, 0 },
 	/* must be the last entry */
 	{ TEGRA20_CLK_CLK_MAX, TEGRA20_CLK_CLK_MAX, 0, 0 },
 };

drivers/clk/tegra/clk-tegra30.c

@@ -1251,14 +1251,12 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA30_CLK_SBC6, TEGRA30_CLK_PLL_P, 100000000, 0 },
 	{ TEGRA30_CLK_PLL_C, TEGRA30_CLK_CLK_MAX, 600000000, 0 },
 	{ TEGRA30_CLK_HOST1X, TEGRA30_CLK_PLL_C, 150000000, 0 },
-	{ TEGRA30_CLK_DISP1, TEGRA30_CLK_PLL_P, 600000000, 0 },
-	{ TEGRA30_CLK_DISP2, TEGRA30_CLK_PLL_P, 600000000, 0 },
 	{ TEGRA30_CLK_TWD, TEGRA30_CLK_CLK_MAX, 0, 1 },
 	{ TEGRA30_CLK_GR2D, TEGRA30_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA30_CLK_GR3D, TEGRA30_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA30_CLK_GR3D2, TEGRA30_CLK_PLL_C, 300000000, 0 },
 	{ TEGRA30_CLK_PLL_U, TEGRA30_CLK_CLK_MAX, 480000000, 0 },
-	{ TEGRA30_CLK_VDE, TEGRA30_CLK_CLK_MAX, 600000000, 0 },
+	{ TEGRA30_CLK_VDE, TEGRA30_CLK_PLL_C, 600000000, 0 },
 	{ TEGRA30_CLK_SPDIF_IN_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
 	{ TEGRA30_CLK_I2S0_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },
 	{ TEGRA30_CLK_I2S1_SYNC, TEGRA30_CLK_CLK_MAX, 24000000, 0 },