Merge tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This patch set is a lot of driver updates for qla4xxx, bfa, hpsa,
  qla2xxx.  It also removes the aic7xxx_old driver (which has been
  deprecated for nearly a decade) and adds support for deadlines in
  error handling"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (75 commits)
  [SCSI] hpsa: allow SCSI mid layer to handle unit attention
  [SCSI] hpsa: do not require board "not ready" status after hard reset
  [SCSI] hpsa: enable unit attention reporting
  [SCSI] hpsa: rename scsi prefetch field
  [SCSI] hpsa: use workqueue instead of kernel thread for lockup detection
  [SCSI] ipr: increase dump size in ipr driver
  [SCSI] mac_scsi: Fix crash on out of memory
  [SCSI] st: fix enlarge_buffer
  [SCSI] qla1280: Annotate timer on stack so object debug does not complain
  [SCSI] qla4xxx: Update driver version to 5.04.00-k3
  [SCSI] qla4xxx: Recreate chap data list during get chap operation
  [SCSI] qla4xxx: Add support for ISCSI_PARAM_LOCAL_IPADDR sysfs attr
  [SCSI] libiscsi: Add local_ipaddr parameter in iscsi_conn struct
  [SCSI] scsi_transport_iscsi: Export ISCSI_PARAM_LOCAL_IPADDR attr for iscsi_connection
  [SCSI] qla4xxx: Add host statistics support
  [SCSI] scsi_transport_iscsi: Add host statistics support
  [SCSI] qla4xxx: Added support for Diagnostics MBOX command
  [SCSI] bfa: Driver version upgrade to 3.2.23.0
  [SCSI] bfa: change FC_ELS_TOV to 20sec
  [SCSI] bfa: Observed auto D-port mode instead of manual
  ...

Documentation/scsi/00-INDEX

@@ -42,8 +42,6 @@ aic79xx.txt
 	- Adaptec Ultra320 SCSI host adapters
 aic7xxx.txt
 	- info on driver for Adaptec controllers
-aic7xxx_old.txt
-	- info on driver for Adaptec controllers, old generation
 arcmsr_spec.txt
 	- ARECA FIRMWARE SPEC (for IOP331 adapter)
 dc395x.txt

Documentation/scsi/scsi_eh.txt

@@ -42,20 +42,14 @@ discussion.
 
  Once LLDD gets hold of a scmd, either the LLDD will complete the
 command by calling scsi_done callback passed from midlayer when
-invoking hostt->queuecommand() or SCSI midlayer will time it out.
+invoking hostt->queuecommand() or the block layer will time it out.
 
 
 [1-2-1] Completing a scmd w/ scsi_done
 
  For all non-EH commands, scsi_done() is the completion callback.  It
-does the following.
-
- 1. Delete timeout timer.  If it fails, it means that timeout timer
-    has expired and is going to finish the command.  Just return.
-
- 2. Link scmd to per-cpu scsi_done_q using scmd->en_entry
-
- 3. Raise SCSI_SOFTIRQ
+just calls blk_complete_request() to delete the block layer timer and
+raise SCSI_SOFTIRQ
 
  SCSI_SOFTIRQ handler scsi_softirq calls scsi_decide_disposition() to
 determine what to do with the command.  scsi_decide_disposition()
@@ -64,10 +58,12 @@ with the command.
 
  - SUCCESS
 	scsi_finish_command() is invoked for the command.  The
-	function does some maintenance choirs and notify completion by
-	calling scmd->done() callback, which, for fs requests, would
-	be HLD completion callback - sd:sd_rw_intr, sr:rw_intr,
-	st:st_intr.
+	function does some maintenance chores and then calls
+	scsi_io_completion() to finish the I/O.
+	scsi_io_completion() then notifies the block layer on
+	the completed request by calling blk_end_request and
+	friends or figures out what to do with the remainder
+	of the data in case of an error.
 
  - NEEDS_RETRY
  - ADD_TO_MLQUEUE
@@ -86,33 +82,45 @@ function
  1. invokes optional hostt->eh_timed_out() callback.  Return value can
     be one of
 
-    - EH_HANDLED
-	This indicates that eh_timed_out() dealt with the timeout.  The
-	scmd is passed to __scsi_done() and thus linked into per-cpu
-	scsi_done_q.  Normal command completion described in [1-2-1]
-	follows.
+    - BLK_EH_HANDLED
+	This indicates that eh_timed_out() dealt with the timeout.
+	The command is passed back to the block layer and completed
+	via __blk_complete_requests().
+
+	*NOTE* After returning BLK_EH_HANDLED the SCSI layer is
+	assumed to be finished with the command, and no other
+	functions from the SCSI layer will be called. So this
+	should typically only be returned if the eh_timed_out()
+	handler raced with normal completion.
 
-    - EH_RESET_TIMER
+    - BLK_EH_RESET_TIMER
 	This indicates that more time is required to finish the
 	command.  Timer is restarted.  This action is counted as a
 	retry and only allowed scmd->allowed + 1(!) times.  Once the
-	limit is reached, action for EH_NOT_HANDLED is taken instead.
+	limit is reached, action for BLK_EH_NOT_HANDLED is taken instead.
 
-	*NOTE* This action is racy as the LLDD could finish the scmd
-	after the timeout has expired but before it's added back.  In
-	such cases, scsi_done() would think that timeout has occurred
-	and return without doing anything.  We lose completion and the
-	command will time out again.
-
-    - EH_NOT_HANDLED
-	This is the same as when eh_timed_out() callback doesn't exist.
+    - BLK_EH_NOT_HANDLED
+        eh_timed_out() callback did not handle the command.
 	Step #2 is taken.
 
+ 2. If the host supports asynchronous completion (as indicated by the
+    no_async_abort setting in the host template) scsi_abort_command()
+    is invoked to schedule an asynchrous abort. If that fails
+    Step #3 is taken.
+
  2. scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD) is invoked for the
     command.  See [1-3] for more information.
 
+[1-3] Asynchronous command aborts
+
+ After a timeout occurs a command abort is scheduled from
+ scsi_abort_command(). If the abort is successful the command
+ will either be retried (if the number of retries is not exhausted)
+ or terminated with DID_TIME_OUT.
+ Otherwise scsi_eh_scmd_add() is invoked for the command.
+ See [1-4] for more information.
 
-[1-3] How EH takes over
+[1-4] How EH takes over
 
  scmds enter EH via scsi_eh_scmd_add(), which does the following.
 
@@ -320,7 +328,8 @@ scmd->allowed.
 
     <<scsi_eh_abort_cmds>>
 
-	This action is taken for each timed out command.
+	This action is taken for each timed out command when
+	no_async_abort is enabled in the host template.
 	hostt->eh_abort_handler() is invoked for each scmd.  The
 	handler returns SUCCESS if it has succeeded to make LLDD and
 	all related hardware forget about the scmd.

Documentation/scsi/scsi_mid_low_api.txt

@@ -882,8 +882,11 @@ Details:
  *
  *      Calling context: kernel thread
  *
- *      Notes: Invoked from scsi_eh thread. No other commands will be
- *      queued on current host during eh.
+ *      Notes: If 'no_async_abort' is defined this callback
+ *  	will be invoked from scsi_eh thread. No other commands
+ *	will then be queued on current host during eh.
+ *	Otherwise it will be called whenever scsi_times_out()
+ *      is called due to a command timeout.
  *
  *      Optionally defined in: LLD
  **/
@@ -1257,6 +1260,8 @@ of interest:
                    address space
     use_clustering - 1=>SCSI commands in mid level's queue can be merged,
                      0=>disallow SCSI command merging
+    no_async_abort - 1=>Asynchronous aborts are not supported
+                     0=>Timed-out commands will be aborted asynchronously
     hostt        - pointer to driver's struct scsi_host_template from which
                    this struct Scsi_Host instance was spawned
     hostt->proc_name  - name of LLD. This is the driver name that sysfs uses

MAINTAINERS

@@ -484,7 +484,6 @@ M:	Hannes Reinecke <hare@suse.de>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/aic7xxx/
-F:	drivers/scsi/aic7xxx_old/
 
 AIMSLAB FM RADIO RECEIVER DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
@@ -6931,8 +6930,7 @@ S:	Maintained
 F:	drivers/scsi/qla1280.[ch]
 
 QLOGIC QLA2XXX FC-SCSI DRIVER
-M:	Andrew Vasquez <andrew.vasquez@qlogic.com>
-M:	linux-driver@qlogic.com
+M:	qla2xxx-upstream@qlogic.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	Documentation/scsi/LICENSE.qla2xxx
@@ -7492,8 +7490,9 @@ F:	include/scsi/srp.h
 SCSI SG DRIVER
 M:	Doug Gilbert <dgilbert@interlog.com>
 L:	linux-scsi@vger.kernel.org
-W:	http://www.torque.net/sg
+W:	http://sg.danny.cz/sg
 S:	Maintained
+F:	Documentation/scsi/scsi-generic.txt
 F:	drivers/scsi/sg.c
 F:	include/scsi/sg.h
 

drivers/scsi/Kconfig

@@ -499,47 +499,6 @@ config SCSI_AACRAID
 
 
 source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
-
-config SCSI_AIC7XXX_OLD
-	tristate "Adaptec AIC7xxx support (old driver)"
-	depends on (ISA || EISA || PCI ) && SCSI
-	help
-	  WARNING This driver is an older aic7xxx driver and is no longer
-	  under active development.  Adaptec, Inc. is writing a new driver to
-	  take the place of this one, and it is recommended that whenever
-	  possible, people should use the new Adaptec written driver instead
-	  of this one.  This driver will eventually be phased out entirely.
-
-	  This is support for the various aic7xxx based Adaptec SCSI
-	  controllers. These include the 274x EISA cards; 284x VLB cards;
-	  2902, 2910, 293x, 294x, 394x, 3985 and several other PCI and
-	  motherboard based SCSI controllers from Adaptec. It does not support
-	  the AAA-13x RAID controllers from Adaptec, nor will it likely ever
-	  support them. It does not support the 2920 cards from Adaptec that
-	  use the Future Domain SCSI controller chip. For those cards, you
-	  need the "Future Domain 16xx SCSI support" driver.
-
-	  In general, if the controller is based on an Adaptec SCSI controller
-	  chip from the aic777x series or the aic78xx series, this driver
-	  should work. The only exception is the 7810 which is specifically
-	  not supported (that's the RAID controller chip on the AAA-13x
-	  cards).
-
-	  Note that the AHA2920 SCSI host adapter is *not* supported by this
-	  driver; choose "Future Domain 16xx SCSI support" instead if you have
-	  one of those.
-
-	  Information on the configuration options for this controller can be
-	  found by checking the help file for each of the available
-	  configuration options. You should read
-	  <file:Documentation/scsi/aic7xxx_old.txt> at a minimum before
-	  contacting the maintainer with any questions.  The SCSI-HOWTO,
-	  available from <http://www.tldp.org/docs.html#howto>, can also
-	  be of great help.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called aic7xxx_old.
-
 source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
 source "drivers/scsi/aic94xx/Kconfig"
 source "drivers/scsi/mvsas/Kconfig"

drivers/scsi/Makefile

@@ -70,7 +70,6 @@ obj-$(CONFIG_SCSI_AHA1740)	+= aha1740.o
 obj-$(CONFIG_SCSI_AIC7XXX)	+= aic7xxx/
 obj-$(CONFIG_SCSI_AIC79XX)	+= aic7xxx/
 obj-$(CONFIG_SCSI_AACRAID)	+= aacraid/
-obj-$(CONFIG_SCSI_AIC7XXX_OLD)	+= aic7xxx_old.o
 obj-$(CONFIG_SCSI_AIC94XX)	+= aic94xx/
 obj-$(CONFIG_SCSI_PM8001)	+= pm8001/
 obj-$(CONFIG_SCSI_ISCI)		+= isci/

drivers/scsi/aic7xxx_old/aic7xxx.h

-/*+M*************************************************************************
- * Adaptec AIC7xxx device driver for Linux.
- *
- * Copyright (c) 1994 John Aycock
- *   The University of Calgary Department of Computer Science.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.  If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- * 
- * $Id: aic7xxx.h,v 3.2 1996/07/23 03:37:26 deang Exp $
- *-M*************************************************************************/
-#ifndef _aic7xxx_h
-#define _aic7xxx_h
-
-#define AIC7XXX_H_VERSION  "5.2.0"
-
-#endif /* _aic7xxx_h */

drivers/scsi/aic7xxx_old/aic7xxx_proc.c

-/*+M*************************************************************************
- * Adaptec AIC7xxx device driver proc support for Linux.
- *
- * Copyright (c) 1995, 1996 Dean W. Gehnert
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.  If not, write to
- * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * ----------------------------------------------------------------
- *  o Modified from the EATA-DMA /proc support.
- *  o Additional support for device block statistics provided by
- *    Matthew Jacob.
- *  o Correction of overflow by Heinz Mauelshagen
- *  o Adittional corrections by Doug Ledford
- *
- *  Dean W. Gehnert, deang@teleport.com, 05/01/96
- *
- *  $Id: aic7xxx_proc.c,v 4.1 1997/06/97 08:23:42 deang Exp $
- *-M*************************************************************************/
-
-
-#define HDRB \
-"               0 - 4K   4 - 16K   16 - 64K  64 - 256K  256K - 1M        1M+"
-
-
-/*+F*************************************************************************
- * Function:
- *   aic7xxx_show_info
- *
- * Description:
- *   Return information to handle /proc support for the driver.
- *-F*************************************************************************/
-int
-aic7xxx_show_info(struct seq_file *m, struct Scsi_Host *HBAptr)
-{
-  struct aic7xxx_host *p;
-  struct aic_dev_data *aic_dev;
-  struct scsi_device *sdptr;
-  unsigned char i;
-  unsigned char tindex;
-
-  for(p=first_aic7xxx; p && p->host != HBAptr; p=p->next)
-    ;
-
-  if (!p)
-  {
-    seq_printf(m, "Can't find adapter for host number %d\n", HBAptr->host_no);
-    return 0;
-  }
-
-  p = (struct aic7xxx_host *) HBAptr->hostdata;
-
-  seq_printf(m, "Adaptec AIC7xxx driver version: ");
-  seq_printf(m, "%s/", AIC7XXX_C_VERSION);
-  seq_printf(m, "%s", AIC7XXX_H_VERSION);
-  seq_printf(m, "\n");
-  seq_printf(m, "Adapter Configuration:\n");
-  seq_printf(m, "           SCSI Adapter: %s\n",
-      board_names[p->board_name_index]);
-  if (p->flags & AHC_TWIN)
-    seq_printf(m, "                         Twin Channel Controller ");
-  else
-  {
-    char *channel = "";
-    char *ultra = "";
-    char *wide = "Narrow ";
-    if (p->flags & AHC_MULTI_CHANNEL)
-    {
-      channel = " Channel A";
-      if (p->flags & (AHC_CHNLB|AHC_CHNLC))
-        channel = (p->flags & AHC_CHNLB) ? " Channel B" : " Channel C";
-    }
-    if (p->features & AHC_WIDE)
-      wide = "Wide ";
-    if (p->features & AHC_ULTRA3)
-    {
-      switch(p->chip & AHC_CHIPID_MASK)
-      {
-        case AHC_AIC7892:
-        case AHC_AIC7899:
-          ultra = "Ultra-160/m LVD/SE ";
-          break;
-        default:
-          ultra = "Ultra-3 LVD/SE ";
-          break;
-      }
-    }
-    else if (p->features & AHC_ULTRA2)
-      ultra = "Ultra-2 LVD/SE ";
-    else if (p->features & AHC_ULTRA)
-      ultra = "Ultra ";
-    seq_printf(m, "                           %s%sController%s ",
-      ultra, wide, channel);
-  }
-  switch(p->chip & ~AHC_CHIPID_MASK)
-  {
-    case AHC_VL:
-      seq_printf(m, "at VLB slot %d\n", p->pci_device_fn);
-      break;
-    case AHC_EISA:
-      seq_printf(m, "at EISA slot %d\n", p->pci_device_fn);
-      break;
-    default:
-      seq_printf(m, "at PCI %d/%d/%d\n", p->pci_bus,
-        PCI_SLOT(p->pci_device_fn), PCI_FUNC(p->pci_device_fn));
-      break;
-  }
-  if( !(p->maddr) )
-  {
-    seq_printf(m, "    Programmed I/O Base: %lx\n", p->base);
-  }
-  else
-  {
-    seq_printf(m, "    PCI MMAPed I/O Base: 0x%lx\n", p->mbase);
-  }
-  if( (p->chip & (AHC_VL | AHC_EISA)) )
-  {
-    seq_printf(m, "    BIOS Memory Address: 0x%08x\n", p->bios_address);
-  }
-  seq_printf(m, " Adapter SEEPROM Config: %s\n",
-          (p->flags & AHC_SEEPROM_FOUND) ? "SEEPROM found and used." :
-         ((p->flags & AHC_USEDEFAULTS) ? "SEEPROM not found, using defaults." :
-           "SEEPROM not found, using leftover BIOS values.") );
-  seq_printf(m, "      Adaptec SCSI BIOS: %s\n",
-          (p->flags & AHC_BIOS_ENABLED) ? "Enabled" : "Disabled");
-  seq_printf(m, "                    IRQ: %d\n", HBAptr->irq);
-  seq_printf(m, "                   SCBs: Active %d, Max Active %d,\n",
-            p->activescbs, p->max_activescbs);
-  seq_printf(m, "                         Allocated %d, HW %d, "
-            "Page %d\n", p->scb_data->numscbs, p->scb_data->maxhscbs,
-            p->scb_data->maxscbs);
-  if (p->flags & AHC_EXTERNAL_SRAM)
-    seq_printf(m, "                         Using External SCB SRAM\n");
-  seq_printf(m, "             Interrupts: %ld", p->isr_count);
-  if (p->chip & AHC_EISA)
-  {
-    seq_printf(m, " %s\n",
-        (p->pause & IRQMS) ? "(Level Sensitive)" : "(Edge Triggered)");
-  }
-  else
-  {
-    seq_printf(m, "\n");
-  }
-  seq_printf(m, "      BIOS Control Word: 0x%04x\n",
-            p->bios_control);
-  seq_printf(m, "   Adapter Control Word: 0x%04x\n",
-            p->adapter_control);
-  seq_printf(m, "   Extended Translation: %sabled\n",
-      (p->flags & AHC_EXTEND_TRANS_A) ? "En" : "Dis");
-  seq_printf(m, "Disconnect Enable Flags: 0x%04x\n", p->discenable);
-  if (p->features & (AHC_ULTRA | AHC_ULTRA2))
-  {
-    seq_printf(m, "     Ultra Enable Flags: 0x%04x\n", p->ultraenb);
-  }
-  seq_printf(m, "Default Tag Queue Depth: %d\n", aic7xxx_default_queue_depth);
-  seq_printf(m, "    Tagged Queue By Device array for aic7xxx host "
-                       "instance %d:\n", p->instance);
-  seq_printf(m, "      {");
-  for(i=0; i < (MAX_TARGETS - 1); i++)
-    seq_printf(m, "%d,",aic7xxx_tag_info[p->instance].tag_commands[i]);
-  seq_printf(m, "%d}\n",aic7xxx_tag_info[p->instance].tag_commands[i]);
-
-  seq_printf(m, "\n");
-  seq_printf(m, "Statistics:\n\n");
-  list_for_each_entry(aic_dev, &p->aic_devs, list)
-  {
-    sdptr = aic_dev->SDptr;
-    tindex = sdptr->channel << 3 | sdptr->id;
-    seq_printf(m, "(scsi%d:%d:%d:%d)\n",
-        p->host_no, sdptr->channel, sdptr->id, sdptr->lun);
-    seq_printf(m, "  Device using %s/%s",
-          (aic_dev->cur.width == MSG_EXT_WDTR_BUS_16_BIT) ?
-          "Wide" : "Narrow",
-          (aic_dev->cur.offset != 0) ?
-          "Sync transfers at " : "Async transfers.\n" );
-    if (aic_dev->cur.offset != 0)
-    {
-      struct aic7xxx_syncrate *sync_rate;
-      unsigned char options = aic_dev->cur.options;
-      int period = aic_dev->cur.period;
-      int rate = (aic_dev->cur.width ==
-                  MSG_EXT_WDTR_BUS_16_BIT) ? 1 : 0;
-
-      sync_rate = aic7xxx_find_syncrate(p, &period, 0, &options);
-      if (sync_rate != NULL)
-      {
-        seq_printf(m, "%s MByte/sec, offset %d\n",
-                        sync_rate->rate[rate],
-                        aic_dev->cur.offset );
-      }
-      else
-      {
-        seq_printf(m, "3.3 MByte/sec, offset %d\n",
-                        aic_dev->cur.offset );
-      }
-    }
-    seq_printf(m, "  Transinfo settings: ");
-    seq_printf(m, "current(%d/%d/%d/%d), ",
-                    aic_dev->cur.period,
-                    aic_dev->cur.offset,
-                    aic_dev->cur.width,
-                    aic_dev->cur.options);
-    seq_printf(m, "goal(%d/%d/%d/%d), ",
-                    aic_dev->goal.period,
-                    aic_dev->goal.offset,
-                    aic_dev->goal.width,
-                    aic_dev->goal.options);
-    seq_printf(m, "user(%d/%d/%d/%d)\n",
-                    p->user[tindex].period,
-                    p->user[tindex].offset,
-                    p->user[tindex].width,
-                    p->user[tindex].options);
-    if(sdptr->simple_tags)
-    {
-      seq_printf(m, "  Tagged Command Queueing Enabled, Ordered Tags %s, Depth %d/%d\n", sdptr->ordered_tags ? "Enabled" : "Disabled", sdptr->queue_depth, aic_dev->max_q_depth);
-    }
-    if(aic_dev->barrier_total)
-      seq_printf(m, "  Total transfers %ld:\n    (%ld/%ld/%ld/%ld reads/writes/REQ_BARRIER/Ordered Tags)\n",
-        aic_dev->r_total+aic_dev->w_total, aic_dev->r_total, aic_dev->w_total,
-        aic_dev->barrier_total, aic_dev->ordered_total);
-    else
-      seq_printf(m, "  Total transfers %ld:\n    (%ld/%ld reads/writes)\n",
-        aic_dev->r_total+aic_dev->w_total, aic_dev->r_total, aic_dev->w_total);
-    seq_printf(m, "%s\n", HDRB);
-    seq_printf(m, "   Reads:");
-    for (i = 0; i < ARRAY_SIZE(aic_dev->r_bins); i++)
-    {
-      seq_printf(m, " %10ld", aic_dev->r_bins[i]);
-    }
-    seq_printf(m, "\n");
-    seq_printf(m, "  Writes:");
-    for (i = 0; i < ARRAY_SIZE(aic_dev->w_bins); i++)
-    {
-      seq_printf(m, " %10ld", aic_dev->w_bins[i]);
-    }
-    seq_printf(m, "\n");
-    seq_printf(m, "\n\n");
-  }
-  return 0;
-}
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only.  This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-indent-level: 2
- * c-brace-imaginary-offset: 0
- * c-brace-offset: -2
- * c-argdecl-indent: 2
- * c-label-offset: -2
- * c-continued-statement-offset: 2
- * c-continued-brace-offset: 0
- * indent-tabs-mode: nil
- * tab-width: 8
- * End:
- */

drivers/scsi/aic7xxx_old/scsi_message.h

-/* Messages (1 byte) */		     /* I/T (M)andatory or (O)ptional */
-#define MSG_CMDCOMPLETE		0x00 /* M/M */
-#define MSG_EXTENDED		0x01 /* O/O */
-#define MSG_SAVEDATAPOINTER	0x02 /* O/O */
-#define MSG_RESTOREPOINTERS	0x03 /* O/O */
-#define MSG_DISCONNECT		0x04 /* O/O */
-#define MSG_INITIATOR_DET_ERR	0x05 /* M/M */
-#define MSG_ABORT		0x06 /* O/M */
-#define MSG_MESSAGE_REJECT	0x07 /* M/M */
-#define MSG_NOOP		0x08 /* M/M */
-#define MSG_PARITY_ERROR	0x09 /* M/M */
-#define MSG_LINK_CMD_COMPLETE	0x0a /* O/O */
-#define MSG_LINK_CMD_COMPLETEF	0x0b /* O/O */
-#define MSG_BUS_DEV_RESET	0x0c /* O/M */
-#define MSG_ABORT_TAG		0x0d /* O/O */
-#define MSG_CLEAR_QUEUE		0x0e /* O/O */
-#define MSG_INIT_RECOVERY	0x0f /* O/O */
-#define MSG_REL_RECOVERY	0x10 /* O/O */
-#define MSG_TERM_IO_PROC	0x11 /* O/O */
-
-/* Messages (2 byte) */
-#define MSG_SIMPLE_Q_TAG	0x20 /* O/O */
-#define MSG_HEAD_OF_Q_TAG	0x21 /* O/O */
-#define MSG_ORDERED_Q_TAG	0x22 /* O/O */
-#define MSG_IGN_WIDE_RESIDUE	0x23 /* O/O */
-
-/* Identify message */		     /* M/M */	
-#define MSG_IDENTIFYFLAG	0x80 
-#define MSG_IDENTIFY_DISCFLAG	0x40 
-#define MSG_IDENTIFY(lun, disc)	(((disc) ? 0xc0 : MSG_IDENTIFYFLAG) | (lun))
-#define MSG_ISIDENTIFY(m)	((m) & MSG_IDENTIFYFLAG)
-
-/* Extended messages (opcode and length) */
-#define MSG_EXT_SDTR		0x01
-#define MSG_EXT_SDTR_LEN	0x03
-
-#define MSG_EXT_WDTR		0x03
-#define MSG_EXT_WDTR_LEN	0x02
-#define MSG_EXT_WDTR_BUS_8_BIT	0x00
-#define MSG_EXT_WDTR_BUS_16_BIT	0x01
-#define MSG_EXT_WDTR_BUS_32_BIT	0x02
-
-#define MSG_EXT_PPR     0x04
-#define MSG_EXT_PPR_LEN	0x06
-#define MSG_EXT_PPR_OPTION_ST 0x00
-#define MSG_EXT_PPR_OPTION_DT_CRC 0x02
-#define MSG_EXT_PPR_OPTION_DT_UNITS 0x03
-#define MSG_EXT_PPR_OPTION_DT_CRC_QUICK 0x04
-#define MSG_EXT_PPR_OPTION_DT_UNITS_QUICK 0x05

drivers/scsi/aic7xxx_old/sequencer.h

-/*
- * Instruction formats for the sequencer program downloaded to
- * Aic7xxx SCSI host adapters
- *
- * Copyright (c) 1997, 1998 Justin T. Gibbs.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification, immediately at the beginning of the file.
- * 2. The name of the author may not be used to endorse or promote products
- *    derived from this software without specific prior written permission.
- *
- * Where this Software is combined with software released under the terms of 
- * the GNU General Public License ("GPL") and the terms of the GPL would require the 
- * combined work to also be released under the terms of the GPL, the terms
- * and conditions of this License will apply in addition to those of the
- * GPL with the exception of any terms or conditions of this License that
- * conflict with, or are expressly prohibited by, the GPL.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- *      $Id: sequencer.h,v 1.3 1997/09/27 19:37:31 gibbs Exp $
- */
-
-#ifdef __LITTLE_ENDIAN_BITFIELD
-struct ins_format1 {
-	unsigned int
-			immediate	: 8,
-			source		: 9,
-			destination	: 9,
-			ret		: 1,
-			opcode		: 4,
-			parity		: 1;
-};
-
-struct ins_format2 {
-	unsigned int
-			shift_control	: 8,
-			source		: 9,
-			destination	: 9,
-			ret		: 1,
-			opcode		: 4,
-			parity		: 1;
-};
-
-struct ins_format3 {
-	unsigned int
-			immediate	: 8,
-			source		: 9,
-			address		: 10,
-			opcode		: 4,
-			parity		: 1;
-};
-#elif defined(__BIG_ENDIAN_BITFIELD)
-struct ins_format1 {
-	unsigned int
-			parity		: 1,
-			opcode		: 4,
-			ret		: 1,
-			destination	: 9,
-			source		: 9,
-			immediate	: 8;
-};
-
-struct ins_format2 {
-	unsigned int
-			parity		: 1,
-			opcode		: 4,
-			ret		: 1,
-			destination	: 9,
-			source		: 9,
-			shift_control	: 8;
-};
-
-struct ins_format3 {
-	unsigned int
-			parity		: 1,
-			opcode		: 4,
-			address		: 10,
-			source		: 9,
-			immediate	: 8;
-};
-#endif
-
-union ins_formats {
-		struct ins_format1 format1;
-		struct ins_format2 format2;
-		struct ins_format3 format3;
-		unsigned char	   bytes[4];
-		unsigned int	   integer;
-};
-struct instruction {
-	union	ins_formats format;
-	unsigned int	srcline;
-	struct symbol *patch_label;
-  struct {
-    struct instruction *stqe_next;
-  } links;
-};
-
-#define	AIC_OP_OR	0x0
-#define	AIC_OP_AND	0x1
-#define AIC_OP_XOR	0x2
-#define	AIC_OP_ADD	0x3
-#define	AIC_OP_ADC	0x4
-#define	AIC_OP_ROL	0x5
-#define	AIC_OP_BMOV	0x6
-
-#define	AIC_OP_JMP	0x8
-#define AIC_OP_JC	0x9
-#define AIC_OP_JNC	0xa
-#define AIC_OP_CALL	0xb
-#define	AIC_OP_JNE	0xc
-#define	AIC_OP_JNZ	0xd
-#define	AIC_OP_JE	0xe
-#define	AIC_OP_JZ	0xf
-
-/* Pseudo Ops */
-#define	AIC_OP_SHL	0x10
-#define	AIC_OP_SHR	0x20
-#define	AIC_OP_ROR	0x30

drivers/scsi/be2iscsi/be_iscsi.c

@@ -541,10 +541,8 @@ static int be2iscsi_get_if_param(struct beiscsi_hba *phba,
 		ip_type = BE2_IPV6;
 
 	len = mgmt_get_if_info(phba, ip_type, &if_info);
-	if (len) {
-		kfree(if_info);
+	if (len)
 		return len;
-	}
 
 	switch (param) {
 	case ISCSI_NET_PARAM_IPV4_ADDR:
@@ -569,7 +567,7 @@ static int be2iscsi_get_if_param(struct beiscsi_hba *phba,
 		break;
 	case ISCSI_NET_PARAM_VLAN_ID:
 		if (if_info->vlan_priority == BEISCSI_VLAN_DISABLE)
-			return -EINVAL;
+			len = -EINVAL;
 		else
 			len = sprintf(buf, "%d\n",
 				     (if_info->vlan_priority &
@@ -577,7 +575,7 @@ static int be2iscsi_get_if_param(struct beiscsi_hba *phba,
 		break;
 	case ISCSI_NET_PARAM_VLAN_PRIORITY:
 		if (if_info->vlan_priority == BEISCSI_VLAN_DISABLE)
-			return -EINVAL;
+			len = -EINVAL;
 		else
 			len = sprintf(buf, "%d\n",
 				     ((if_info->vlan_priority >> 13) &

drivers/scsi/bfa/bfa_core.c

@@ -1367,10 +1367,6 @@ bfa_faa_query(struct bfa_s *bfa, struct bfa_faa_attr_s *attr,
 	struct bfa_iocfc_s      *iocfc = &bfa->iocfc;
 	bfa_status_t            status;
 
-	iocfc->faa_args.faa_attr = attr;
-	iocfc->faa_args.faa_cb.faa_cbfn = cbfn;
-	iocfc->faa_args.faa_cb.faa_cbarg = cbarg;
-
 	status = bfa_faa_validate_request(bfa);
 	if (status != BFA_STATUS_OK)
 		return status;
@@ -1378,6 +1374,10 @@ bfa_faa_query(struct bfa_s *bfa, struct bfa_faa_attr_s *attr,
 	if (iocfc->faa_args.busy == BFA_TRUE)
 		return BFA_STATUS_DEVBUSY;
 
+	iocfc->faa_args.faa_attr = attr;
+	iocfc->faa_args.faa_cb.faa_cbfn = cbfn;
+	iocfc->faa_args.faa_cb.faa_cbarg = cbarg;
+
 	iocfc->faa_args.busy = BFA_TRUE;
 	memset(&faa_attr_req, 0, sizeof(struct bfi_faa_query_s));
 	bfi_h2i_set(faa_attr_req.mh, BFI_MC_IOCFC,

drivers/scsi/bfa/bfa_defs.h

@@ -132,6 +132,7 @@ enum bfa_status {
 	BFA_STATUS_ETIMER	= 5,	/*  Timer expired - Retry, if persists,
 					 *  contact support */
 	BFA_STATUS_EPROTOCOL	= 6,	/*  Protocol error */
+	BFA_STATUS_BADFLASH	= 9,	/*  Flash is bad */
 	BFA_STATUS_SFP_UNSUPP	= 10,	/*  Unsupported SFP - Replace SFP */
 	BFA_STATUS_UNKNOWN_VFID = 11,	/*  VF_ID not found */
 	BFA_STATUS_DATACORRUPTED = 12,  /*  Diag returned data corrupted */

drivers/scsi/bfa/bfa_fc.h

@@ -1026,7 +1026,7 @@ struct fc_alpabm_s {
 #define FC_ED_TOV	2
 #define FC_REC_TOV	(FC_ED_TOV + 1)
 #define FC_RA_TOV	10
-#define FC_ELS_TOV	((2 * FC_RA_TOV) + 1)
+#define FC_ELS_TOV	(2 * FC_RA_TOV)
 #define FC_FCCT_TOV	(3 * FC_RA_TOV)
 
 /*

drivers/scsi/bfa/bfa_fcs_lport.c

@@ -773,7 +773,20 @@ bfa_fcs_lport_uf_recv(struct bfa_fcs_lport_s *lport,
 	bfa_trc(lport->fcs, fchs->type);
 
 	if (!bfa_fcs_lport_is_online(lport)) {
-		bfa_stats(lport, uf_recv_drops);
+		/*
+		 * In direct attach topology, it is possible to get a PLOGI
+		 * before the lport is online due to port feature
+		 * (QoS/Trunk/FEC/CR), so send a rjt
+		 */
+		if ((fchs->type == FC_TYPE_ELS) &&
+			(els_cmd->els_code == FC_ELS_PLOGI)) {
+			bfa_fcs_lport_send_ls_rjt(lport, fchs,
+				FC_LS_RJT_RSN_UNABLE_TO_PERF_CMD,
+				FC_LS_RJT_EXP_NO_ADDL_INFO);
+			bfa_stats(lport, plogi_rcvd);
+		} else
+			bfa_stats(lport, uf_recv_drops);
+
 		return;
 	}
 

drivers/scsi/bfa/bfa_ioc.h

@@ -515,6 +515,8 @@ void bfa_flash_attach(struct bfa_flash_s *flash, struct bfa_ioc_s *ioc,
 		void *dev, struct bfa_trc_mod_s *trcmod, bfa_boolean_t mincfg);
 void bfa_flash_memclaim(struct bfa_flash_s *flash,
 		u8 *dm_kva, u64 dm_pa, bfa_boolean_t mincfg);
+bfa_status_t    bfa_flash_raw_read(void __iomem *pci_bar_kva,
+				u32 offset, char *buf, u32 len);
 
 /*
  *	DIAG module specific
@@ -888,7 +890,7 @@ void bfa_ioc_enable(struct bfa_ioc_s *ioc);
 void bfa_ioc_disable(struct bfa_ioc_s *ioc);
 bfa_boolean_t bfa_ioc_intx_claim(struct bfa_ioc_s *ioc);
 
-void bfa_ioc_boot(struct bfa_ioc_s *ioc, u32 boot_type,
+bfa_status_t bfa_ioc_boot(struct bfa_ioc_s *ioc, u32 boot_type,
 		u32 boot_env);
 void bfa_ioc_isr(struct bfa_ioc_s *ioc, struct bfi_mbmsg_s *msg);
 void bfa_ioc_error_isr(struct bfa_ioc_s *ioc);
@@ -919,6 +921,7 @@ bfa_status_t bfa_ioc_debug_fwtrc(struct bfa_ioc_s *ioc, void *trcdata,
 				 int *trclen);
 bfa_status_t bfa_ioc_debug_fwcore(struct bfa_ioc_s *ioc, void *buf,
 	u32 *offset, int *buflen);
+bfa_status_t bfa_ioc_fwsig_invalidate(struct bfa_ioc_s *ioc);
 bfa_boolean_t bfa_ioc_sem_get(void __iomem *sem_reg);
 void bfa_ioc_fwver_get(struct bfa_ioc_s *ioc,
 			struct bfi_ioc_image_hdr_s *fwhdr);
@@ -956,6 +959,8 @@ bfa_status_t bfa_ablk_optrom_en(struct bfa_ablk_s *ablk,
 bfa_status_t bfa_ablk_optrom_dis(struct bfa_ablk_s *ablk,
 		bfa_ablk_cbfn_t cbfn, void *cbarg);
 
+bfa_status_t bfa_ioc_flash_img_get_chnk(struct bfa_ioc_s *ioc, u32 off,
+				u32 *fwimg);
 /*
  * bfa mfg wwn API functions
  */

drivers/scsi/bfa/bfa_ioc_cb.c

@@ -81,6 +81,29 @@ bfa_ioc_set_cb_hwif(struct bfa_ioc_s *ioc)
 static bfa_boolean_t
 bfa_ioc_cb_firmware_lock(struct bfa_ioc_s *ioc)
 {
+	enum bfi_ioc_state alt_fwstate, cur_fwstate;
+	struct bfi_ioc_image_hdr_s fwhdr;
+
+	cur_fwstate = bfa_ioc_cb_get_cur_ioc_fwstate(ioc);
+	bfa_trc(ioc, cur_fwstate);
+	alt_fwstate = bfa_ioc_cb_get_alt_ioc_fwstate(ioc);
+	bfa_trc(ioc, alt_fwstate);
+
+	/*
+	 * Uninit implies this is the only driver as of now.
+	 */
+	if (cur_fwstate == BFI_IOC_UNINIT)
+		return BFA_TRUE;
+	/*
+	 * Check if another driver with a different firmware is active
+	 */
+	bfa_ioc_fwver_get(ioc, &fwhdr);
+	if (!bfa_ioc_fwver_cmp(ioc, &fwhdr) &&
+		alt_fwstate != BFI_IOC_DISABLED) {
+		bfa_trc(ioc, alt_fwstate);
+		return BFA_FALSE;
+	}
+
 	return BFA_TRUE;
 }
 

drivers/scsi/bfa/bfa_svc.c

@@ -6758,7 +6758,7 @@ bfa_dport_scn(struct bfa_dport_s *dport, struct bfi_diag_dport_scn_s *msg)
 		dport->rp_pwwn = msg->info.teststart.pwwn;
 		dport->rp_nwwn = msg->info.teststart.nwwn;
 		dport->lpcnt = cpu_to_be32(msg->info.teststart.numfrm);
-		bfa_dport_result_start(dport, BFA_DPORT_OPMODE_AUTO);
+		bfa_dport_result_start(dport, msg->info.teststart.mode);
 		break;
 
 	case BFI_DPORT_SCN_SUBTESTSTART:

drivers/scsi/bfa/bfad_bsg.c

@@ -228,6 +228,18 @@ bfad_iocmd_iocfc_get_attr(struct bfad_s *bfad, void *cmd)
 	return 0;
 }
 
+int
+bfad_iocmd_ioc_fw_sig_inv(struct bfad_s *bfad, void *cmd)
+{
+	struct bfa_bsg_gen_s *iocmd = (struct bfa_bsg_gen_s *)cmd;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bfad->bfad_lock, flags);
+	iocmd->status = bfa_ioc_fwsig_invalidate(&bfad->bfa.ioc);
+	spin_unlock_irqrestore(&bfad->bfad_lock, flags);
+	return 0;
+}
+
 int
 bfad_iocmd_iocfc_set_intr(struct bfad_s *bfad, void *cmd)
 {
@@ -2893,6 +2905,9 @@ bfad_iocmd_handler(struct bfad_s *bfad, unsigned int cmd, void *iocmd,
 	case IOCMD_IOC_PCIFN_CFG:
 		rc = bfad_iocmd_ioc_get_pcifn_cfg(bfad, iocmd);
 		break;
+	case IOCMD_IOC_FW_SIG_INV:
+		rc = bfad_iocmd_ioc_fw_sig_inv(bfad, iocmd);
+		break;
 	case IOCMD_PCIFN_CREATE:
 		rc = bfad_iocmd_pcifn_create(bfad, iocmd);
 		break;

drivers/scsi/bfa/bfad_bsg.h

@@ -34,6 +34,7 @@ enum {
 	IOCMD_IOC_RESET_FWSTATS,
 	IOCMD_IOC_SET_ADAPTER_NAME,
 	IOCMD_IOC_SET_PORT_NAME,
+	IOCMD_IOC_FW_SIG_INV,
 	IOCMD_IOCFC_GET_ATTR,
 	IOCMD_IOCFC_SET_INTR,
 	IOCMD_PORT_ENABLE,

drivers/scsi/bfa/bfad_drv.h

@@ -57,7 +57,7 @@
 #ifdef BFA_DRIVER_VERSION
 #define BFAD_DRIVER_VERSION    BFA_DRIVER_VERSION
 #else
-#define BFAD_DRIVER_VERSION    "3.2.21.1"
+#define BFAD_DRIVER_VERSION    "3.2.23.0"
 #endif
 
 #define BFAD_PROTO_NAME FCPI_NAME
@@ -240,8 +240,8 @@ enum bfad_sm_event {
 	BFAD_E_KTHREAD_CREATE_FAILED	= 2,
 	BFAD_E_INIT			= 3,
 	BFAD_E_INIT_SUCCESS		= 4,
-	BFAD_E_INIT_FAILED		= 5,
-	BFAD_E_INTR_INIT_FAILED		= 6,
+	BFAD_E_HAL_INIT_FAILED		= 5,
+	BFAD_E_INIT_FAILED		= 6,
 	BFAD_E_FCS_EXIT_COMP		= 7,
 	BFAD_E_EXIT_COMP		= 8,
 	BFAD_E_STOP			= 9

drivers/scsi/hpsa_cmd.h

@@ -356,7 +356,9 @@ struct CfgTable {
 	u32           TransMethodOffset;
 	u8            ServerName[16];
 	u32           HeartBeat;
-	u32           SCSI_Prefetch;
+	u32           driver_support;
+#define			ENABLE_SCSI_PREFETCH 0x100
+#define			ENABLE_UNIT_ATTN 0x01
 	u32	 	MaxScatterGatherElements;
 	u32		MaxLogicalUnits;
 	u32		MaxPhysicalDevices;

drivers/scsi/megaraid/megaraid_sas.h

@@ -1527,7 +1527,6 @@ struct megasas_instance {
 	u32 *reply_queue;
 	dma_addr_t reply_queue_h;
 
-	unsigned long base_addr;
 	struct megasas_register_set __iomem *reg_set;
 	u32 *reply_post_host_index_addr[MR_MAX_MSIX_REG_ARRAY];
 	struct megasas_pd_list          pd_list[MEGASAS_MAX_PD];