Commit 19febab6 authored by Mark Brown's avatar Mark Brown

Merge branch 'for-5.0' of...

Merge branch 'for-5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.1
parents c6bebefa cc29ea00
......@@ -17,7 +17,7 @@ Required properties:
Documentation/devicetree/bindings/regulator/regulator.txt
Optional properties:
- reset-gpio: the reset pin for the chip, for more details consult
- reset-gpios: the reset pin for the chip, for more details consult
Documentation/devicetree/bindings/gpio/gpio.txt
- DVDD-supply: supply voltage for the digital core, please consult
......@@ -47,7 +47,7 @@ Examples:
DVDD-supply = <&regulator_digital>;
adi,micbias = <3>;
reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
adau1977_i2c: adau1977@11 {
......@@ -57,5 +57,5 @@ Examples:
AVDD-supply = <&regulator>;
DVDD-supply = <&regulator_digital>;
reset_gpio = <&gpio 10 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
};
......@@ -398,7 +398,8 @@ static int fsl_esai_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
break;
case SND_SOC_DAIFMT_RIGHT_J:
/* Data on rising edge of bclk, frame high, right aligned */
xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP | ESAI_xCR_xWA;
xccr |= ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP;
xcr |= ESAI_xCR_xWA;
break;
case SND_SOC_DAIFMT_DSP_A:
/* Data on rising edge of bclk, frame high, 1clk before data */
......@@ -455,12 +456,12 @@ static int fsl_esai_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
return -EINVAL;
}
mask = ESAI_xCR_xFSL | ESAI_xCR_xFSR;
mask = ESAI_xCR_xFSL | ESAI_xCR_xFSR | ESAI_xCR_xWA;
regmap_update_bits(esai_priv->regmap, REG_ESAI_TCR, mask, xcr);
regmap_update_bits(esai_priv->regmap, REG_ESAI_RCR, mask, xcr);
mask = ESAI_xCCR_xCKP | ESAI_xCCR_xHCKP | ESAI_xCCR_xFSP |
ESAI_xCCR_xFSD | ESAI_xCCR_xCKD | ESAI_xCR_xWA;
ESAI_xCCR_xFSD | ESAI_xCCR_xCKD;
regmap_update_bits(esai_priv->regmap, REG_ESAI_TCCR, mask, xccr);
regmap_update_bits(esai_priv->regmap, REG_ESAI_RCCR, mask, xccr);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment