mfd: Add support for RICOH PMIC RC5T583

Ricoh power management IC  RC5T583 contains is multi
functional device having multiple sub devices inside this.
This device has multiple dcdc/ldo regulators, gpios, interrupt
controllers, on-key, RTCs, ADCs.
This device have 4 DCDCs, 8 LDOs, 8 GPIOs, 6 ADCs, 3 RTCs etc.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

drivers/mfd/Kconfig

@@ -846,6 +846,20 @@ config MFD_INTEL_MSIC
 	  Passage) chip. This chip embeds audio, battery, GPIO, etc.
 	  devices used in Intel Medfield platforms.
 
+config MFD_RC5T583
+	bool "Ricoh RC5T583 Power Management system device"
+	depends on I2C && GENERIC_HARDIRQS
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Select this option to get support for the RICOH583 Power
+	  Management system device.
+	  This driver provides common support for accessing the device
+	  through i2c interface. The device supports multiple sub-devices
+	  like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
+	  Additional drivers must be enabled in order to use the
+	  different functionality of the device.
+
 endmenu
 endif
 

drivers/mfd/Makefile

@@ -112,4 +112,5 @@ obj-$(CONFIG_MFD_PM8XXX_IRQ) 	+= pm8xxx-irq.o
 obj-$(CONFIG_TPS65911_COMPARATOR)	+= tps65911-comparator.o
 obj-$(CONFIG_MFD_AAT2870_CORE)	+= aat2870-core.o
 obj-$(CONFIG_MFD_INTEL_MSIC)	+= intel_msic.o
+obj-$(CONFIG_MFD_RC5T583)	+= rc5t583.o rc5t583-irq.o
 obj-$(CONFIG_MFD_S5M_CORE)	+= s5m-core.o s5m-irq.o

include/linux/mfd/rc5t583.h

+/*
+ * Core driver interface to access RICOH_RC5T583 power management chip.
+ *
+ * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
+ * Author: Laxman dewangan <ldewangan@nvidia.com>
+ *
+ * Based on code
+ *      Copyright (C) 2011 RICOH COMPANY,LTD
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __LINUX_MFD_RC5T583_H
+#define __LINUX_MFD_RC5T583_H
+
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+#define RC5T583_MAX_REGS		0xF8
+
+/* Maximum number of main interrupts */
+#define MAX_MAIN_INTERRUPT		5
+#define RC5T583_MAX_GPEDGE_REG		2
+#define RC5T583_MAX_INTERRUPT_MASK_REGS	9
+
+/* Interrupt enable register */
+#define RC5T583_INT_EN_SYS1	0x19
+#define RC5T583_INT_EN_SYS2	0x1D
+#define RC5T583_INT_EN_DCDC	0x41
+#define RC5T583_INT_EN_RTC	0xED
+#define RC5T583_INT_EN_ADC1	0x90
+#define RC5T583_INT_EN_ADC2	0x91
+#define RC5T583_INT_EN_ADC3	0x92
+
+/* Interrupt status registers (monitor regs in Ricoh)*/
+#define RC5T583_INTC_INTPOL	0xAD
+#define RC5T583_INTC_INTEN	0xAE
+#define RC5T583_INTC_INTMON	0xAF
+
+#define RC5T583_INT_MON_GRP	0xAF
+#define RC5T583_INT_MON_SYS1	0x1B
+#define RC5T583_INT_MON_SYS2	0x1F
+#define RC5T583_INT_MON_DCDC	0x43
+#define RC5T583_INT_MON_RTC	0xEE
+
+/* Interrupt clearing registers */
+#define RC5T583_INT_IR_SYS1	0x1A
+#define RC5T583_INT_IR_SYS2	0x1E
+#define RC5T583_INT_IR_DCDC	0x42
+#define RC5T583_INT_IR_RTC	0xEE
+#define RC5T583_INT_IR_ADCL	0x94
+#define RC5T583_INT_IR_ADCH	0x95
+#define RC5T583_INT_IR_ADCEND	0x96
+#define RC5T583_INT_IR_GPIOR	0xA9
+#define RC5T583_INT_IR_GPIOF	0xAA
+
+/* Sleep sequence registers */
+#define RC5T583_SLPSEQ1		0x21
+#define RC5T583_SLPSEQ2		0x22
+#define RC5T583_SLPSEQ3		0x23
+#define RC5T583_SLPSEQ4		0x24
+#define RC5T583_SLPSEQ5		0x25
+#define RC5T583_SLPSEQ6		0x26
+#define RC5T583_SLPSEQ7		0x27
+#define RC5T583_SLPSEQ8		0x28
+#define RC5T583_SLPSEQ9		0x29
+#define RC5T583_SLPSEQ10	0x2A
+#define RC5T583_SLPSEQ11	0x2B
+
+/* Regulator registers */
+#define RC5T583_REG_DC0CTL	0x30
+#define RC5T583_REG_DC0DAC	0x31
+#define RC5T583_REG_DC0LATCTL	0x32
+#define RC5T583_REG_SR0CTL	0x33
+
+#define RC5T583_REG_DC1CTL	0x34
+#define RC5T583_REG_DC1DAC	0x35
+#define RC5T583_REG_DC1LATCTL	0x36
+#define RC5T583_REG_SR1CTL	0x37
+
+#define RC5T583_REG_DC2CTL	0x38
+#define RC5T583_REG_DC2DAC	0x39
+#define RC5T583_REG_DC2LATCTL	0x3A
+#define RC5T583_REG_SR2CTL	0x3B
+
+#define RC5T583_REG_DC3CTL	0x3C
+#define RC5T583_REG_DC3DAC	0x3D
+#define RC5T583_REG_DC3LATCTL	0x3E
+#define RC5T583_REG_SR3CTL	0x3F
+
+
+#define RC5T583_REG_LDOEN1	0x50
+#define RC5T583_REG_LDOEN2	0x51
+#define RC5T583_REG_LDODIS1	0x52
+#define RC5T583_REG_LDODIS2	0x53
+
+#define RC5T583_REG_LDO0DAC	0x54
+#define RC5T583_REG_LDO1DAC	0x55
+#define RC5T583_REG_LDO2DAC	0x56
+#define RC5T583_REG_LDO3DAC	0x57
+#define RC5T583_REG_LDO4DAC	0x58
+#define RC5T583_REG_LDO5DAC	0x59
+#define RC5T583_REG_LDO6DAC	0x5A
+#define RC5T583_REG_LDO7DAC	0x5B
+#define RC5T583_REG_LDO8DAC	0x5C
+#define RC5T583_REG_LDO9DAC	0x5D
+
+#define RC5T583_REG_DC0DAC_DS	0x60
+#define RC5T583_REG_DC1DAC_DS	0x61
+#define RC5T583_REG_DC2DAC_DS	0x62
+#define RC5T583_REG_DC3DAC_DS	0x63
+
+#define RC5T583_REG_LDO0DAC_DS	0x64
+#define RC5T583_REG_LDO1DAC_DS	0x65
+#define RC5T583_REG_LDO2DAC_DS	0x66
+#define RC5T583_REG_LDO3DAC_DS	0x67
+#define RC5T583_REG_LDO4DAC_DS	0x68
+#define RC5T583_REG_LDO5DAC_DS	0x69
+#define RC5T583_REG_LDO6DAC_DS	0x6A
+#define RC5T583_REG_LDO7DAC_DS	0x6B
+#define RC5T583_REG_LDO8DAC_DS	0x6C
+#define RC5T583_REG_LDO9DAC_DS	0x6D
+
+/* GPIO register base address */
+#define RC5T583_GPIO_IOSEL	0xA0
+#define RC5T583_GPIO_PDEN	0xA1
+#define RC5T583_GPIO_IOOUT	0xA2
+#define RC5T583_GPIO_PGSEL	0xA3
+#define RC5T583_GPIO_GPINV	0xA4
+#define RC5T583_GPIO_GPDEB	0xA5
+#define RC5T583_GPIO_GPEDGE1	0xA6
+#define RC5T583_GPIO_GPEDGE2	0xA7
+#define RC5T583_GPIO_EN_INT	0xA8
+#define RC5T583_GPIO_MON_IOIN	0xAB
+#define RC5T583_GPIO_GPOFUNC	0xAC
+
+/* RICOH_RC5T583 IRQ definitions */
+enum {
+	RC5T583_IRQ_ONKEY,
+	RC5T583_IRQ_ACOK,
+	RC5T583_IRQ_LIDOPEN,
+	RC5T583_IRQ_PREOT,
+	RC5T583_IRQ_CLKSTP,
+	RC5T583_IRQ_ONKEY_OFF,
+	RC5T583_IRQ_WD,
+	RC5T583_IRQ_EN_PWRREQ1,
+	RC5T583_IRQ_EN_PWRREQ2,
+	RC5T583_IRQ_PRE_VINDET,
+
+	RC5T583_IRQ_DC0LIM,
+	RC5T583_IRQ_DC1LIM,
+	RC5T583_IRQ_DC2LIM,
+	RC5T583_IRQ_DC3LIM,
+
+	RC5T583_IRQ_CTC,
+	RC5T583_IRQ_YALE,
+	RC5T583_IRQ_DALE,
+	RC5T583_IRQ_WALE,
+
+	RC5T583_IRQ_AIN1L,
+	RC5T583_IRQ_AIN2L,
+	RC5T583_IRQ_AIN3L,
+	RC5T583_IRQ_VBATL,
+	RC5T583_IRQ_VIN3L,
+	RC5T583_IRQ_VIN8L,
+	RC5T583_IRQ_AIN1H,
+	RC5T583_IRQ_AIN2H,
+	RC5T583_IRQ_AIN3H,
+	RC5T583_IRQ_VBATH,
+	RC5T583_IRQ_VIN3H,
+	RC5T583_IRQ_VIN8H,
+	RC5T583_IRQ_ADCEND,
+
+	RC5T583_IRQ_GPIO0,
+	RC5T583_IRQ_GPIO1,
+	RC5T583_IRQ_GPIO2,
+	RC5T583_IRQ_GPIO3,
+	RC5T583_IRQ_GPIO4,
+	RC5T583_IRQ_GPIO5,
+	RC5T583_IRQ_GPIO6,
+	RC5T583_IRQ_GPIO7,
+
+	/* Should be last entry */
+	RC5T583_MAX_IRQS,
+};
+
+/* Ricoh583 gpio definitions */
+enum {
+	RC5T583_GPIO0,
+	RC5T583_GPIO1,
+	RC5T583_GPIO2,
+	RC5T583_GPIO3,
+	RC5T583_GPIO4,
+	RC5T583_GPIO5,
+	RC5T583_GPIO6,
+	RC5T583_GPIO7,
+
+	/* Should be last entry */
+	RC5T583_MAX_GPIO,
+};
+
+enum {
+	RC5T583_DS_NONE,
+	RC5T583_DS_DC0,
+	RC5T583_DS_DC1,
+	RC5T583_DS_DC2,
+	RC5T583_DS_DC3,
+	RC5T583_DS_LDO0,
+	RC5T583_DS_LDO1,
+	RC5T583_DS_LDO2,
+	RC5T583_DS_LDO3,
+	RC5T583_DS_LDO4,
+	RC5T583_DS_LDO5,
+	RC5T583_DS_LDO6,
+	RC5T583_DS_LDO7,
+	RC5T583_DS_LDO8,
+	RC5T583_DS_LDO9,
+	RC5T583_DS_PSO0,
+	RC5T583_DS_PSO1,
+	RC5T583_DS_PSO2,
+	RC5T583_DS_PSO3,
+	RC5T583_DS_PSO4,
+	RC5T583_DS_PSO5,
+	RC5T583_DS_PSO6,
+	RC5T583_DS_PSO7,
+
+	/* Should be last entry */
+	RC5T583_DS_MAX,
+};
+
+/*
+ * Ricoh pmic RC5T583 supports sleep through two external controls.
+ * The output of gpios and regulator can be enable/disable through
+ * this external signals.
+ */
+enum {
+	RC5T583_EXT_PWRREQ1_CONTROL = 0x1,
+	RC5T583_EXT_PWRREQ2_CONTROL = 0x2,
+};
+
+struct rc5t583 {
+	struct device	*dev;
+	struct regmap	*regmap;
+	int		chip_irq;
+	int		irq_base;
+	struct mutex	irq_lock;
+	unsigned long	group_irq_en[MAX_MAIN_INTERRUPT];
+
+	/* For main interrupt bits in INTC */
+	uint8_t		intc_inten_reg;
+
+	/* For group interrupt bits and address */
+	uint8_t		irq_en_reg[RC5T583_MAX_INTERRUPT_MASK_REGS];
+
+	/* For gpio edge */
+	uint8_t		gpedge_reg[RC5T583_MAX_GPEDGE_REG];
+};
+
+/*
+ * rc5t583_platform_data: Platform data for ricoh rc5t583 pmu.
+ * The board specific data is provided through this structure.
+ * @irq_base: Irq base number on which this device registers their interrupts.
+ * @enable_shutdown: Enable shutdown through the input pin "shutdown".
+ */
+
+struct rc5t583_platform_data {
+	int		irq_base;
+	bool		enable_shutdown;
+};
+
+int rc5t583_write(struct device *dev, u8 reg, uint8_t val);
+int rc5t583_read(struct device *dev, uint8_t reg, uint8_t *val);
+int rc5t583_set_bits(struct device *dev, unsigned int reg,
+		unsigned int bit_mask);
+int rc5t583_clear_bits(struct device *dev, unsigned int reg,
+		unsigned int bit_mask);
+int rc5t583_update(struct device *dev, unsigned int reg,
+		unsigned int val, unsigned int mask);
+int rc5t583_ext_power_req_config(struct device *dev, int deepsleep_id,
+	int ext_pwr_req, int deepsleep_slot_nr);
+int rc5t583_irq_init(struct rc5t583 *rc5t583, int irq, int irq_base);
+int rc5t583_irq_exit(struct rc5t583 *rc5t583);
+
+#endif