Commit 1b6a1a16 authored by Stephan Gerhold's avatar Stephan Gerhold Committed by Bjorn Andersson

arm64: dts: qcom: msm8916: Replace invalid bias-pull-none property

msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.

However, "bias-pull-none" actually does not exist at all - not in
mainline and not in downstream. I can only guess that the original
intention was to configure "no pull", i.e. bias-disable.

Change it to that instead.

Fixes: 143bb9ad ("arm64: dts: qcom: add audio pinctrls")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: default avatarStephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-2-stephan@gerhold.netSigned-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
parent c00b5c28
...@@ -556,7 +556,7 @@ pinconf { ...@@ -556,7 +556,7 @@ pinconf {
pins = "gpio63", "gpio64", "gpio65", "gpio66", pins = "gpio63", "gpio64", "gpio65", "gpio66",
"gpio67", "gpio68"; "gpio67", "gpio68";
drive-strength = <8>; drive-strength = <8>;
bias-pull-none; bias-disable;
}; };
}; };
cdc_pdm_lines_sus: pdm-lines-off { cdc_pdm_lines_sus: pdm-lines-off {
...@@ -585,7 +585,7 @@ pinconf { ...@@ -585,7 +585,7 @@ pinconf {
pins = "gpio113", "gpio114", "gpio115", pins = "gpio113", "gpio114", "gpio115",
"gpio116"; "gpio116";
drive-strength = <8>; drive-strength = <8>;
bias-pull-none; bias-disable;
}; };
}; };
...@@ -613,7 +613,7 @@ pinmux { ...@@ -613,7 +613,7 @@ pinmux {
pinconf { pinconf {
pins = "gpio110"; pins = "gpio110";
drive-strength = <8>; drive-strength = <8>;
bias-pull-none; bias-disable;
}; };
}; };
...@@ -639,7 +639,7 @@ pinmux { ...@@ -639,7 +639,7 @@ pinmux {
pinconf { pinconf {
pins = "gpio116"; pins = "gpio116";
drive-strength = <8>; drive-strength = <8>;
bias-pull-none; bias-disable;
}; };
}; };
ext_mclk_tlmm_lines_sus: mclk-lines-off { ext_mclk_tlmm_lines_sus: mclk-lines-off {
...@@ -667,7 +667,7 @@ pinconf { ...@@ -667,7 +667,7 @@ pinconf {
pins = "gpio112", "gpio117", "gpio118", pins = "gpio112", "gpio117", "gpio118",
"gpio119"; "gpio119";
drive-strength = <8>; drive-strength = <8>;
bias-pull-none; bias-disable;
}; };
}; };
ext_sec_tlmm_lines_sus: tlmm-lines-off { ext_sec_tlmm_lines_sus: tlmm-lines-off {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment