Commit 1c1538be authored by Jeff Kirsher's avatar Jeff Kirsher

pch_gbe: Move the OKI Semiconductor driver

Move the OKI Semiconductor driver into driver/net/ethernet/oki-semi/
and make the necessary Kconfig and Makefile changes.

Note: there is no documented maintainer for this driver, so I CC'd
the last 2 major contributors.

CC: Tomoya <tomoya-linux@dsn.okisemi.com>
CC: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 9e13fbf7
......@@ -996,25 +996,6 @@ config S6GMAC
To compile this driver as a module, choose M here. The module
will be called s6gmac.
config PCH_GBE
tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
depends on PCI
select MII
---help---
This is a gigabit ethernet driver for EG20T PCH.
EG20T PCH is the platform controller hub that is used in Intel's
general embedded platform.
EG20T PCH has Gigabit Ethernet interface.
Using this interface, it is able to access system devices connected
to Gigabit Ethernet.
This driver enables Gigabit Ethernet function.
This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
Output Hub), ML7223.
ML7223 IOH is for MP(Media Phone) use.
ML7223 is companion chip for Intel Atom E6xx series.
ML7223 is completely compatible for Intel EG20T PCH.
endif # NETDEV_1000
#
......
......@@ -156,5 +156,4 @@ obj-$(CONFIG_WIMAX) += wimax/
obj-$(CONFIG_CAIF) += caif/
obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
obj-$(CONFIG_PCH_GBE) += pch_gbe/
obj-$(CONFIG_TILE_NET) += tile/
......@@ -32,6 +32,7 @@ source "drivers/net/ethernet/mellanox/Kconfig"
source "drivers/net/ethernet/myricom/Kconfig"
source "drivers/net/ethernet/natsemi/Kconfig"
source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/oki-semi/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
......
......@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
......
#
# OKI Semiconductor device configuration
#
config NET_VENDOR_OKI
bool "OKI Semiconductor devices"
depends on PCI
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about OKI Semiconductor cards. If you say Y, you will
be asked for your specific card in the following questions.
if NET_VENDOR_OKI
source "drivers/net/ethernet/oki-semi/pch_gbe/Kconfig"
endif # NET_VENDOR_OKI
#
# Makefile for the OKI Semiconductor device drivers.
#
obj-$(CONFIG_PCH_GBE) += pch_gbe/
#
# OKI Semiconductor device configuration
#
config PCH_GBE
tristate "OKI SEMICONDUCTOR ML7223 IOH GbE (Intel EG20T PCH)"
depends on PCI
select MII
---help---
This is a gigabit ethernet driver for EG20T PCH.
EG20T PCH is the platform controller hub that is used in Intel's
general embedded platform. EG20T PCH has Gigabit Ethernet interface.
Using this interface, it is able to access system devices connected
to Gigabit Ethernet. This driver enables Gigabit Ethernet function.
This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
Output Hub), ML7223.
ML7223 IOH is for MP(Media Phone) use.
ML7223 is companion chip for Intel Atom E6xx series.
ML7223 is completely compatible for Intel EG20T PCH.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment