Commit 1c92a554 authored by Hemant Pedanekar's avatar Hemant Pedanekar Committed by Kevin Hilman

davinci: dm646x: Add IDE setup

This patch adds platform data and init function for IDE which could be called
from board specific file to register IDE device.

Note that for 594MHz device the transfer mode is limited to UDMA4 since ideclk
rate is less than 100 MHz, which forces udma_mask in palm_bk3710.c to UDMA4,
while for 729MHz device, it is UDMA5.
Signed-off-by: default avatarHemant Pedanekar <hemantp@ti.com>
Signed-off-by: default avatarKevin Hilman <khilman@deeprootsystems.com>
parent 6077d265
......@@ -600,6 +600,32 @@ static struct platform_device dm646x_edma_device = {
.resource = edma_resources,
};
static struct resource ide_resources[] = {
{
.start = DM646X_ATA_REG_BASE,
.end = DM646X_ATA_REG_BASE + 0x7ff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_DM646X_IDE,
.end = IRQ_DM646X_IDE,
.flags = IORESOURCE_IRQ,
},
};
static u64 ide_dma_mask = DMA_BIT_MASK(32);
static struct platform_device ide_dev = {
.name = "palm_bk3710",
.id = -1,
.resource = ide_resources,
.num_resources = ARRAY_SIZE(ide_resources),
.dev = {
.dma_mask = &ide_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
static struct resource dm646x_mcasp0_resources[] = {
{
.name = "mcasp0",
......@@ -769,6 +795,12 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
.sram_len = SZ_32K,
};
void __init dm646x_init_ide()
{
davinci_cfg_reg(DM646X_ATAEN);
platform_device_register(&ide_dev);
}
void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)
{
dm646x_mcasp0_device.dev.platform_data = pdata;
......
......@@ -22,7 +22,10 @@
#define DM646X_EMAC_MDIO_OFFSET (0x4000)
#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000)
#define DM646X_ATA_REG_BASE (0x01C66000)
void __init dm646x_init(void);
void __init dm646x_init_ide(void);
void __init dm646x_init_mcasp0(struct snd_platform_data *pdata);
void __init dm646x_init_mcasp1(struct snd_platform_data *pdata);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment