scsi: lpfc: add Trunking support

Add trunking support to the driver. Trunking is found on more recent
asics. In general, trunking appears as a single "port" to the driver
and overall behavior doesn't differ. Link speed is reported as an
aggregate value, while link speed control is done on a per-physical
link basis with all links in the trunk symmetrical. Some commands
returning port information are updated to additionally provide
trunking information. And new ACQEs are generated to report physical
link events relative to the trunk.

This patch contains the following modifications:

- Added link speed settings of 128GB and 256GB.

- Added handling of trunk-related ACQEs, mainly logging and trapping
  of physical link statuses.

- Added additional bsg interface to query trunk state by applications.

- Augment link_state sysfs attribtute to display trunk link status
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/lpfc/lpfc.h

@@ -335,6 +335,18 @@ enum hba_state {
 	LPFC_HBA_ERROR       =  -1
 };
 
+struct lpfc_trunk_link_state {
+	enum hba_state state;
+	uint8_t fault;
+};
+
+struct lpfc_trunk_link  {
+	struct lpfc_trunk_link_state link0,
+				     link1,
+				     link2,
+				     link3;
+};
+
 struct lpfc_vport {
 	struct lpfc_hba *phba;
 	struct list_head listentry;
@@ -684,6 +696,7 @@ struct lpfc_hba {
 	uint32_t iocb_cmd_size;
 	uint32_t iocb_rsp_size;
 
+	struct lpfc_trunk_link  trunk_link;
 	enum hba_state link_state;
 	uint32_t link_flag;	/* link state flags */
 #define LS_LOOPBACK_MODE      0x1	/* NPort is in Loopback mode */

drivers/scsi/lpfc/lpfc_attr.c

@@ -883,6 +883,42 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr,
 		}
 	}
 
+	if ((phba->sli_rev == LPFC_SLI_REV4) &&
+	    ((bf_get(lpfc_sli_intf_if_type,
+	     &phba->sli4_hba.sli_intf) ==
+	     LPFC_SLI_INTF_IF_TYPE_6))) {
+		struct lpfc_trunk_link link = phba->trunk_link;
+
+		if (bf_get(lpfc_conf_trunk_port0, &phba->sli4_hba))
+			len += snprintf(buf + len, PAGE_SIZE - len,
+				"Trunk port 0: Link %s %s\n",
+				(link.link0.state == LPFC_LINK_UP) ?
+				 "Up" : "Down. ",
+				trunk_errmsg[link.link0.fault]);
+
+		if (bf_get(lpfc_conf_trunk_port1, &phba->sli4_hba))
+			len += snprintf(buf + len, PAGE_SIZE - len,
+				"Trunk port 1: Link %s %s\n",
+				(link.link1.state == LPFC_LINK_UP) ?
+				 "Up" : "Down. ",
+				trunk_errmsg[link.link1.fault]);
+
+		if (bf_get(lpfc_conf_trunk_port2, &phba->sli4_hba))
+			len += snprintf(buf + len, PAGE_SIZE - len,
+				"Trunk port 2: Link %s %s\n",
+				(link.link2.state == LPFC_LINK_UP) ?
+				 "Up" : "Down. ",
+				trunk_errmsg[link.link2.fault]);
+
+		if (bf_get(lpfc_conf_trunk_port3, &phba->sli4_hba))
+			len += snprintf(buf + len, PAGE_SIZE - len,
+				"Trunk port 3: Link %s %s\n",
+				(link.link3.state == LPFC_LINK_UP) ?
+				 "Up" : "Down. ",
+				trunk_errmsg[link.link3.fault]);
+
+	}
+
 	return len;
 }
 
@@ -1430,6 +1466,66 @@ lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr,
 	return snprintf(buf, PAGE_SIZE, "%d\n", phba->nport_event_cnt);
 }
 
+int
+lpfc_set_trunking(struct lpfc_hba *phba, char *buff_out)
+{
+	LPFC_MBOXQ_t *mbox = NULL;
+	unsigned long val = 0;
+	char *pval = 0;
+	int rc = 0;
+
+	if (!strncmp("enable", buff_out,
+				 strlen("enable"))) {
+		pval = buff_out + strlen("enable") + 1;
+		rc = kstrtoul(pval, 0, &val);
+		if (rc)
+			return rc; /* Invalid  number */
+	} else if (!strncmp("disable", buff_out,
+				 strlen("disable"))) {
+		val = 0;
+	} else {
+		return -EINVAL;  /* Invalid command */
+	}
+
+	switch (val) {
+	case 0:
+		val = 0x0; /* Disable */
+		break;
+	case 2:
+		val = 0x1; /* Enable two port trunk */
+		break;
+	case 4:
+		val = 0x2; /* Enable four port trunk */
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+			"0070 Set trunk mode with val %ld ", val);
+
+	mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+	if (!mbox)
+		return -ENOMEM;
+
+	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
+			 LPFC_MBOX_OPCODE_FCOE_FC_SET_TRUNK_MODE,
+			 12, LPFC_SLI4_MBX_EMBED);
+
+	bf_set(lpfc_mbx_set_trunk_mode,
+	       &mbox->u.mqe.un.set_trunk_mode,
+	       val);
+	rc = lpfc_sli_issue_mbox(phba, mbox, MBX_POLL);
+	if (rc)
+		lpfc_printf_log(phba, KERN_ERR, LOG_MBOX,
+				"0071 Set trunk mode failed with status: %d",
+				rc);
+	if (rc != MBX_TIMEOUT)
+		mempool_free(mbox, phba->mbox_mem_pool);
+
+	return 0;
+}
+
 /**
  * lpfc_board_mode_show - Return the state of the board
  * @dev: class device that is converted into a Scsi_host.
@@ -1522,6 +1618,8 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,
 		status = lpfc_sli4_pdev_reg_request(phba, LPFC_FW_RESET);
 	else if (strncmp(buf, "dv_reset", sizeof("dv_reset") - 1) == 0)
 		status = lpfc_sli4_pdev_reg_request(phba, LPFC_DV_RESET);
+	else if (strncmp(buf, "trunk", sizeof("trunk") - 1) == 0)
+		status = lpfc_set_trunking(phba, (char *)buf + sizeof("trunk"));
 	else
 		status = -EINVAL;
 
@@ -6019,6 +6117,9 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
 		case LPFC_LINK_SPEED_64GHZ:
 			fc_host_speed(shost) = FC_PORTSPEED_64GBIT;
 			break;
+		case LPFC_LINK_SPEED_128GHZ:
+			fc_host_speed(shost) = FC_PORTSPEED_128GBIT;
+			break;
 		default:
 			fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
 			break;

drivers/scsi/lpfc/lpfc_bsg.c

@@ -5615,6 +5615,77 @@ lpfc_bsg_get_ras_fwlog(struct bsg_job *job)
 	return rc;
 }
 
+static int
+lpfc_get_trunk_info(struct bsg_job *job)
+{
+	struct lpfc_vport *vport = shost_priv(fc_bsg_to_shost(job));
+	struct lpfc_hba *phba = vport->phba;
+	struct fc_bsg_reply *bsg_reply = job->reply;
+	struct lpfc_trunk_info *event_reply;
+	int rc = 0;
+
+	if (job->request_len <
+	    sizeof(struct fc_bsg_request) + sizeof(struct get_trunk_info_req)) {
+		lpfc_printf_log(phba, KERN_ERR, LOG_LIBDFC,
+				"2744 Received GET TRUNK _INFO request below "
+				"minimum size\n");
+		rc = -EINVAL;
+		goto job_error;
+	}
+
+	event_reply = (struct lpfc_trunk_info *)
+		bsg_reply->reply_data.vendor_reply.vendor_rsp;
+
+	if (job->reply_len <
+	    sizeof(struct fc_bsg_request) + sizeof(struct lpfc_trunk_info)) {
+		lpfc_printf_log(phba, KERN_WARNING, LOG_LIBDFC,
+				"2728 Received GET TRUNK _INFO reply below "
+				"minimum size\n");
+		rc = -EINVAL;
+		goto job_error;
+	}
+	if (event_reply == NULL) {
+		rc = -EINVAL;
+		goto job_error;
+	}
+
+	bsg_bf_set(lpfc_trunk_info_link_status, event_reply,
+		   (phba->link_state >= LPFC_LINK_UP) ? 1 : 0);
+
+	bsg_bf_set(lpfc_trunk_info_trunk_active0, event_reply,
+		   (phba->trunk_link.link0.state == LPFC_LINK_UP) ? 1 : 0);
+
+	bsg_bf_set(lpfc_trunk_info_trunk_active1, event_reply,
+		   (phba->trunk_link.link1.state == LPFC_LINK_UP) ? 1 : 0);
+
+	bsg_bf_set(lpfc_trunk_info_trunk_active2, event_reply,
+		   (phba->trunk_link.link2.state == LPFC_LINK_UP) ? 1 : 0);
+
+	bsg_bf_set(lpfc_trunk_info_trunk_active3, event_reply,
+		   (phba->trunk_link.link3.state == LPFC_LINK_UP) ? 1 : 0);
+
+	bsg_bf_set(lpfc_trunk_info_trunk_config0, event_reply,
+		   bf_get(lpfc_conf_trunk_port0, &phba->sli4_hba));
+
+	bsg_bf_set(lpfc_trunk_info_trunk_config1, event_reply,
+		   bf_get(lpfc_conf_trunk_port1, &phba->sli4_hba));
+
+	bsg_bf_set(lpfc_trunk_info_trunk_config2, event_reply,
+		   bf_get(lpfc_conf_trunk_port2, &phba->sli4_hba));
+
+	bsg_bf_set(lpfc_trunk_info_trunk_config3, event_reply,
+		   bf_get(lpfc_conf_trunk_port3, &phba->sli4_hba));
+
+	event_reply->port_speed = phba->sli4_hba.link_state.speed / 1000;
+	event_reply->logical_speed =
+				phba->sli4_hba.link_state.logical_speed / 100;
+job_error:
+	bsg_reply->result = rc;
+	bsg_job_done(job, bsg_reply->result,
+		       bsg_reply->reply_payload_rcv_len);
+	return rc;
+
+}
 
 /**
  * lpfc_bsg_hst_vendor - process a vendor-specific fc_bsg_job
@@ -5675,6 +5746,9 @@ lpfc_bsg_hst_vendor(struct bsg_job *job)
 	case LPFC_BSG_VENDOR_RAS_SET_CONFIG:
 		rc = lpfc_bsg_set_ras_config(job);
 		break;
+	case LPFC_BSG_VENDOR_GET_TRUNK_INFO:
+		rc = lpfc_get_trunk_info(job);
+		break;
 	default:
 		rc = -EINVAL;
 		bsg_reply->reply_payload_rcv_len = 0;

drivers/scsi/lpfc/lpfc_bsg.h

@@ -42,6 +42,7 @@
 #define LPFC_BSG_VENDOR_RAS_GET_FWLOG		17
 #define LPFC_BSG_VENDOR_RAS_GET_CONFIG		18
 #define LPFC_BSG_VENDOR_RAS_SET_CONFIG		19
+#define LPFC_BSG_VENDOR_GET_TRUNK_INFO		20
 
 struct set_ct_event {
 	uint32_t command;
@@ -331,6 +332,43 @@ struct lpfc_bsg_get_ras_config_reply {
 	uint32_t log_buff_sz;
 };
 
+struct lpfc_trunk_info {
+	uint32_t word0;
+#define lpfc_trunk_info_link_status_SHIFT      0
+#define lpfc_trunk_info_link_status_MASK       1
+#define lpfc_trunk_info_link_status_WORD       word0
+#define lpfc_trunk_info_trunk_active0_SHIFT    8
+#define lpfc_trunk_info_trunk_active0_MASK     1
+#define lpfc_trunk_info_trunk_active0_WORD     word0
+#define lpfc_trunk_info_trunk_active1_SHIFT    9
+#define lpfc_trunk_info_trunk_active1_MASK     1
+#define lpfc_trunk_info_trunk_active1_WORD     word0
+#define lpfc_trunk_info_trunk_active2_SHIFT    10
+#define lpfc_trunk_info_trunk_active2_MASK     1
+#define lpfc_trunk_info_trunk_active2_WORD     word0
+#define lpfc_trunk_info_trunk_active3_SHIFT    11
+#define lpfc_trunk_info_trunk_active3_MASK     1
+#define lpfc_trunk_info_trunk_active3_WORD     word0
+#define lpfc_trunk_info_trunk_config0_SHIFT    12
+#define lpfc_trunk_info_trunk_config0_MASK     1
+#define lpfc_trunk_info_trunk_config0_WORD     word0
+#define lpfc_trunk_info_trunk_config1_SHIFT    13
+#define lpfc_trunk_info_trunk_config1_MASK     1
+#define lpfc_trunk_info_trunk_config1_WORD     word0
+#define lpfc_trunk_info_trunk_config2_SHIFT    14
+#define lpfc_trunk_info_trunk_config2_MASK     1
+#define lpfc_trunk_info_trunk_config2_WORD     word0
+#define lpfc_trunk_info_trunk_config3_SHIFT    15
+#define lpfc_trunk_info_trunk_config3_MASK     1
+#define lpfc_trunk_info_trunk_config3_WORD     word0
+	uint16_t    port_speed;
+	uint16_t    logical_speed;
+	uint32_t    reserved3;
+};
+
+struct get_trunk_info_req {
+	uint32_t command;
+};
 
 /* driver only */
 #define SLI_CONFIG_NOT_HANDLED		0

drivers/scsi/lpfc/lpfc_ct.c

@@ -2340,6 +2340,8 @@ lpfc_fdmi_port_attr_support_speed(struct lpfc_vport *vport,
 
 	ae->un.AttrInt = 0;
 	if (!(phba->hba_flag & HBA_FCOE_MODE)) {
+		if (phba->lmt & LMT_128Gb)
+			ae->un.AttrInt |= HBA_PORTSPEED_128GFC;
 		if (phba->lmt & LMT_64Gb)
 			ae->un.AttrInt |= HBA_PORTSPEED_64GFC;
 		if (phba->lmt & LMT_32Gb)
@@ -2416,6 +2418,9 @@ lpfc_fdmi_port_attr_speed(struct lpfc_vport *vport,
 		case LPFC_LINK_SPEED_64GHZ:
 			ae->un.AttrInt = HBA_PORTSPEED_64GFC;
 			break;
+		case LPFC_LINK_SPEED_128GHZ:
+			ae->un.AttrInt = HBA_PORTSPEED_128GFC;
+			break;
 		default:
 			ae->un.AttrInt = HBA_PORTSPEED_UNKNOWN;
 			break;

drivers/scsi/lpfc/lpfc_els.c

@@ -5377,6 +5377,8 @@ lpfc_rdp_res_speed(struct fc_rdp_port_speed_desc *desc, struct lpfc_hba *phba)
 
 	desc->info.port_speed.speed = cpu_to_be16(rdp_speed);
 
+	if (phba->lmt & LMT_128Gb)
+		rdp_cap |= RDP_PS_128GB;
 	if (phba->lmt & LMT_64Gb)
 		rdp_cap |= RDP_PS_64GB;
 	if (phba->lmt & LMT_32Gb)

drivers/scsi/lpfc/lpfc_hbadisc.c

@@ -3114,6 +3114,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba *phba, struct lpfc_mbx_read_top *la)
 		case LPFC_LINK_SPEED_16GHZ:
 		case LPFC_LINK_SPEED_32GHZ:
 		case LPFC_LINK_SPEED_64GHZ:
+		case LPFC_LINK_SPEED_128GHZ:
 			break;
 		default:
 			phba->fc_linkspeed = LPFC_LINK_SPEED_UNKNOWN;

drivers/scsi/lpfc/lpfc_hw4.h

@@ -1035,6 +1035,7 @@ struct mbox_header {
 #define LPFC_MBOX_OPCODE_FCOE_SET_FCLINK_SETTINGS	0x21
 #define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE		0x22
 #define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_LOOPBACK	0x23
+#define LPFC_MBOX_OPCODE_FCOE_FC_SET_TRUNK_MODE		0x42
 
 /* Low level Opcodes */
 #define LPFC_MBOX_OPCODE_SET_DIAG_LOG_OPTION		0x37
@@ -2781,6 +2782,9 @@ struct lpfc_mbx_read_config {
 #define lpfc_mbx_rd_conf_lnk_ldv_SHIFT		8
 #define lpfc_mbx_rd_conf_lnk_ldv_MASK		0x00000001
 #define lpfc_mbx_rd_conf_lnk_ldv_WORD		word2
+#define lpfc_mbx_rd_conf_trunk_SHIFT		12
+#define lpfc_mbx_rd_conf_trunk_MASK		0x0000000F
+#define lpfc_mbx_rd_conf_trunk_WORD		word2
 #define lpfc_mbx_rd_conf_topology_SHIFT		24
 #define lpfc_mbx_rd_conf_topology_MASK		0x000000FF
 #define lpfc_mbx_rd_conf_topology_WORD		word2
@@ -3516,6 +3520,15 @@ struct lpfc_mbx_set_host_data {
 	uint8_t  data[LPFC_HOST_OS_DRIVER_VERSION_SIZE];
 };
 
+struct lpfc_mbx_set_trunk_mode {
+	struct mbox_header header;
+	uint32_t word0;
+#define lpfc_mbx_set_trunk_mode_WORD      word0
+#define lpfc_mbx_set_trunk_mode_SHIFT     0
+#define lpfc_mbx_set_trunk_mode_MASK      0xFF
+	uint32_t word1;
+	uint32_t word2;
+};
 
 struct lpfc_mbx_get_sli4_parameters {
 	struct mbox_header header;
@@ -3915,6 +3928,7 @@ struct lpfc_mqe {
 		struct lpfc_mbx_set_feature  set_feature;
 		struct lpfc_mbx_memory_dump_type3 mem_dump_type3;
 		struct lpfc_mbx_set_host_data set_host_data;
+		struct lpfc_mbx_set_trunk_mode set_trunk_mode;
 		struct lpfc_mbx_nop nop;
 		struct lpfc_mbx_set_ras_fwlog ras_fwlog;
 	} un;
@@ -4051,6 +4065,23 @@ struct lpfc_acqe_grp5 {
 	uint32_t trailer;
 };
 
+static char *const trunk_errmsg[] = {	/* map errcode */
+	"",	/* There is no such error code at index 0*/
+	"link negotiated speed does not match existing"
+		" trunk - link was \"low\" speed",
+	"link negotiated speed does not match"
+		" existing trunk - link was \"middle\" speed",
+	"link negotiated speed does not match existing"
+		" trunk - link was \"high\" speed",
+	"Attached to non-trunking port - F_Port",
+	"Attached to non-trunking port - N_Port",
+	"FLOGI response timeout",
+	"non-FLOGI frame received",
+	"Invalid FLOGI response",
+	"Trunking initialization protocol",
+	"Trunk peer device mismatch",
+};
+
 struct lpfc_acqe_fc_la {
 	uint32_t word0;
 #define lpfc_acqe_fc_la_speed_SHIFT		24
@@ -4084,6 +4115,7 @@ struct lpfc_acqe_fc_la {
 #define LPFC_FC_LA_TYPE_MDS_LINK_DOWN	0x4
 #define LPFC_FC_LA_TYPE_MDS_LOOPBACK	0x5
 #define LPFC_FC_LA_TYPE_UNEXP_WWPN	0x6
+#define LPFC_FC_LA_TYPE_TRUNKING_EVENT  0x7
 #define lpfc_acqe_fc_la_port_type_SHIFT		6
 #define lpfc_acqe_fc_la_port_type_MASK		0x00000003
 #define lpfc_acqe_fc_la_port_type_WORD		word0
@@ -4092,6 +4124,32 @@ struct lpfc_acqe_fc_la {
 #define lpfc_acqe_fc_la_port_number_SHIFT	0
 #define lpfc_acqe_fc_la_port_number_MASK	0x0000003F
 #define lpfc_acqe_fc_la_port_number_WORD	word0
+
+/* Attention Type is 0x07 (Trunking Event) word0 */
+#define lpfc_acqe_fc_la_trunk_link_status_port0_SHIFT	16
+#define lpfc_acqe_fc_la_trunk_link_status_port0_MASK	0x0000001
+#define lpfc_acqe_fc_la_trunk_link_status_port0_WORD	word0
+#define lpfc_acqe_fc_la_trunk_link_status_port1_SHIFT	17
+#define lpfc_acqe_fc_la_trunk_link_status_port1_MASK	0x0000001
+#define lpfc_acqe_fc_la_trunk_link_status_port1_WORD	word0
+#define lpfc_acqe_fc_la_trunk_link_status_port2_SHIFT	18
+#define lpfc_acqe_fc_la_trunk_link_status_port2_MASK	0x0000001
+#define lpfc_acqe_fc_la_trunk_link_status_port2_WORD	word0
+#define lpfc_acqe_fc_la_trunk_link_status_port3_SHIFT	19
+#define lpfc_acqe_fc_la_trunk_link_status_port3_MASK	0x0000001
+#define lpfc_acqe_fc_la_trunk_link_status_port3_WORD	word0
+#define lpfc_acqe_fc_la_trunk_config_port0_SHIFT	20
+#define lpfc_acqe_fc_la_trunk_config_port0_MASK		0x0000001
+#define lpfc_acqe_fc_la_trunk_config_port0_WORD		word0
+#define lpfc_acqe_fc_la_trunk_config_port1_SHIFT	21
+#define lpfc_acqe_fc_la_trunk_config_port1_MASK		0x0000001
+#define lpfc_acqe_fc_la_trunk_config_port1_WORD		word0
+#define lpfc_acqe_fc_la_trunk_config_port2_SHIFT	22
+#define lpfc_acqe_fc_la_trunk_config_port2_MASK		0x0000001
+#define lpfc_acqe_fc_la_trunk_config_port2_WORD		word0
+#define lpfc_acqe_fc_la_trunk_config_port3_SHIFT	23
+#define lpfc_acqe_fc_la_trunk_config_port3_MASK		0x0000001
+#define lpfc_acqe_fc_la_trunk_config_port3_WORD		word0
 	uint32_t word1;
 #define lpfc_acqe_fc_la_llink_spd_SHIFT		16
 #define lpfc_acqe_fc_la_llink_spd_MASK		0x0000FFFF
@@ -4099,6 +4157,12 @@ struct lpfc_acqe_fc_la {
 #define lpfc_acqe_fc_la_fault_SHIFT		0
 #define lpfc_acqe_fc_la_fault_MASK		0x000000FF
 #define lpfc_acqe_fc_la_fault_WORD		word1
+#define lpfc_acqe_fc_la_trunk_fault_SHIFT		0
+#define lpfc_acqe_fc_la_trunk_fault_MASK		0x0000000F
+#define lpfc_acqe_fc_la_trunk_fault_WORD		word1
+#define lpfc_acqe_fc_la_trunk_linkmask_SHIFT		4
+#define lpfc_acqe_fc_la_trunk_linkmask_MASK		0x000000F
+#define lpfc_acqe_fc_la_trunk_linkmask_WORD		word1
 #define LPFC_FC_LA_FAULT_NONE		0x0
 #define LPFC_FC_LA_FAULT_LOCAL		0x1
 #define LPFC_FC_LA_FAULT_REMOTE		0x2

drivers/scsi/lpfc/lpfc_init.c

@@ -4108,6 +4108,8 @@ void lpfc_host_supported_speeds_set(struct Scsi_Host *shost)
 	struct lpfc_hba   *phba = vport->phba;
 
 	fc_host_supported_speeds(shost) = 0;
+	if (phba->lmt & LMT_128Gb)
+		fc_host_supported_speeds(shost) |= FC_PORTSPEED_128GBIT;
 	if (phba->lmt & LMT_64Gb)
 		fc_host_supported_speeds(shost) |= FC_PORTSPEED_64GBIT;
 	if (phba->lmt & LMT_32Gb)
@@ -4471,6 +4473,9 @@ lpfc_sli4_port_speed_parse(struct lpfc_hba *phba, uint32_t evt_code,
 		case LPFC_FC_LA_SPEED_64G:
 			port_speed = 64000;
 			break;
+		case LPFC_FC_LA_SPEED_128G:
+			port_speed = 128000;
+			break;
 		default:
 			port_speed = 0;
 		}
@@ -4612,6 +4617,140 @@ lpfc_sli4_async_link_evt(struct lpfc_hba *phba,
 	mempool_free(pmb, phba->mbox_mem_pool);
 }
 
+/**
+ * lpfc_async_link_speed_to_read_top - Parse async evt link speed code to read
+ * topology.
+ * @phba: pointer to lpfc hba data structure.
+ * @evt_code: asynchronous event code.
+ * @speed_code: asynchronous event link speed code.
+ *
+ * This routine is to parse the giving SLI4 async event link speed code into
+ * value of Read topology link speed.
+ *
+ * Return: link speed in terms of Read topology.
+ **/
+static uint8_t
+lpfc_async_link_speed_to_read_top(struct lpfc_hba *phba, uint8_t speed_code)
+{
+	uint8_t port_speed;
+
+	switch (speed_code) {
+	case LPFC_FC_LA_SPEED_1G:
+		port_speed = LPFC_LINK_SPEED_1GHZ;
+		break;
+	case LPFC_FC_LA_SPEED_2G:
+		port_speed = LPFC_LINK_SPEED_2GHZ;
+		break;
+	case LPFC_FC_LA_SPEED_4G:
+		port_speed = LPFC_LINK_SPEED_4GHZ;
+		break;
+	case LPFC_FC_LA_SPEED_8G:
+		port_speed = LPFC_LINK_SPEED_8GHZ;
+		break;
+	case LPFC_FC_LA_SPEED_16G:
+		port_speed = LPFC_LINK_SPEED_16GHZ;
+		break;
+	case LPFC_FC_LA_SPEED_32G:
+		port_speed = LPFC_LINK_SPEED_32GHZ;
+		break;
+	case LPFC_FC_LA_SPEED_64G:
+		port_speed = LPFC_LINK_SPEED_64GHZ;
+		break;
+	case LPFC_FC_LA_SPEED_128G:
+		port_speed = LPFC_LINK_SPEED_128GHZ;
+		break;
+	case LPFC_FC_LA_SPEED_256G:
+		port_speed = LPFC_LINK_SPEED_256GHZ;
+		break;
+	default:
+		port_speed = 0;
+		break;
+	}
+
+	return port_speed;
+}
+
+#define trunk_link_status(__idx)\
+	bf_get(lpfc_acqe_fc_la_trunk_config_port##__idx, acqe_fc) ?\
+	       ((phba->trunk_link.link##__idx.state == LPFC_LINK_UP) ?\
+		"Link up" : "Link down") : "NA"
+/* Did port __idx reported an error */
+#define trunk_port_fault(__idx)\
+	bf_get(lpfc_acqe_fc_la_trunk_config_port##__idx, acqe_fc) ?\
+	       (port_fault & (1 << __idx) ? "YES" : "NO") : "NA"
+
+static void
+lpfc_update_trunk_link_status(struct lpfc_hba *phba,
+			      struct lpfc_acqe_fc_la *acqe_fc)
+{
+	uint8_t port_fault = bf_get(lpfc_acqe_fc_la_trunk_linkmask, acqe_fc);
+	uint8_t err = bf_get(lpfc_acqe_fc_la_trunk_fault, acqe_fc);
+
+	phba->sli4_hba.link_state.speed =
+		lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_FC,
+				bf_get(lpfc_acqe_fc_la_speed, acqe_fc));
+
+	phba->sli4_hba.link_state.logical_speed =
+				bf_get(lpfc_acqe_fc_la_llink_spd, acqe_fc);
+	/* We got FC link speed, convert to fc_linkspeed (READ_TOPOLOGY) */
+	phba->fc_linkspeed =
+		 lpfc_async_link_speed_to_read_top(
+				phba,
+				bf_get(lpfc_acqe_fc_la_speed, acqe_fc));
+
+	if (bf_get(lpfc_acqe_fc_la_trunk_config_port0, acqe_fc)) {
+		phba->trunk_link.link0.state =
+			bf_get(lpfc_acqe_fc_la_trunk_link_status_port0, acqe_fc)
+			? LPFC_LINK_UP : LPFC_LINK_DOWN;
+		if (port_fault & 0x1)
+			phba->trunk_link.link0.fault = err;
+	}
+	if (bf_get(lpfc_acqe_fc_la_trunk_config_port1, acqe_fc)) {
+		phba->trunk_link.link1.state =
+			bf_get(lpfc_acqe_fc_la_trunk_link_status_port1, acqe_fc)
+			? LPFC_LINK_UP : LPFC_LINK_DOWN;
+		if (port_fault & 0x2)
+			phba->trunk_link.link1.fault = err;
+	}
+	if (bf_get(lpfc_acqe_fc_la_trunk_config_port2, acqe_fc)) {
+		phba->trunk_link.link2.state =
+			bf_get(lpfc_acqe_fc_la_trunk_link_status_port2, acqe_fc)
+			? LPFC_LINK_UP : LPFC_LINK_DOWN;
+		if (port_fault & 0x4)
+			phba->trunk_link.link2.fault = err;
+	}
+	if (bf_get(lpfc_acqe_fc_la_trunk_config_port3, acqe_fc)) {
+		phba->trunk_link.link3.state =
+			bf_get(lpfc_acqe_fc_la_trunk_link_status_port3, acqe_fc)
+			? LPFC_LINK_UP : LPFC_LINK_DOWN;
+		if (port_fault & 0x8)
+			phba->trunk_link.link3.fault = err;
+	}
+
+	lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+			"2910 Async FC Trunking Event - Speed:%d\n"
+			"\tLogical speed:%d "
+			"port0: %s port1: %s port2: %s port3: %s\n",
+			phba->sli4_hba.link_state.speed,
+			phba->sli4_hba.link_state.logical_speed,
+			trunk_link_status(0), trunk_link_status(1),
+			trunk_link_status(2), trunk_link_status(3));
+
+	if (port_fault)
+		lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+				"3202 trunk error:0x%x (%s) seen on port0:%s "
+				/*
+				 * SLI-4: We have only 0xA error codes
+				 * defined as of now. print an appropriate
+				 * message in case driver needs to be updated.
+				 */
+				"port1:%s port2:%s port3:%s\n", err, err > 0xA ?
+				"UNDEFINED. update driver." : trunk_errmsg[err],
+				trunk_port_fault(0), trunk_port_fault(1),
+				trunk_port_fault(2), trunk_port_fault(3));
+}
+
+
 /**
  * lpfc_sli4_async_fc_evt - Process the asynchronous FC link event
  * @phba: pointer to lpfc hba data structure.
@@ -4637,6 +4776,13 @@ lpfc_sli4_async_fc_evt(struct lpfc_hba *phba, struct lpfc_acqe_fc_la *acqe_fc)
 				bf_get(lpfc_trailer_type, acqe_fc));
 		return;
 	}
+
+	if (bf_get(lpfc_acqe_fc_la_att_type, acqe_fc) ==
+	    LPFC_FC_LA_TYPE_TRUNKING_EVENT) {
+		lpfc_update_trunk_link_status(phba, acqe_fc);
+		return;
+	}
+
 	/* Keep the link status for extra SLI4 state machine reference */
 	phba->sli4_hba.link_state.speed =
 			lpfc_sli4_port_speed_parse(phba, LPFC_TRAILER_CODE_FC,
@@ -7804,6 +7950,8 @@ lpfc_sli4_read_config(struct lpfc_hba *phba)
 			phba->sli4_hba.bbscn_params.word0 = rd_config->word8;
 		}
 
+		phba->sli4_hba.conf_trunk =
+			bf_get(lpfc_mbx_rd_conf_trunk, rd_config);
 		phba->sli4_hba.extents_in_use =
 			bf_get(lpfc_mbx_rd_conf_extnts_inuse, rd_config);
 		phba->sli4_hba.max_cfg_param.max_xri =

drivers/scsi/lpfc/lpfc_scsi.h

@@ -194,6 +194,10 @@ struct lpfc_scsi_buf {
 #define NO_MORE_OAS_LUN		-1
 #define NOT_OAS_ENABLED_LUN	NO_MORE_OAS_LUN
 
+#ifndef FC_PORTSPEED_128GBIT
+#define FC_PORTSPEED_128GBIT	0x2000
+#endif
+
 #define TXRDY_PAYLOAD_LEN	12
 
 int lpfc_sli4_scmd_to_wqidx_distr(struct lpfc_hba *phba,

drivers/scsi/lpfc/lpfc_sli.c

@@ -7636,7 +7636,18 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 	 */
 	spin_lock_irq(&phba->hbalock);
 	phba->link_state = LPFC_LINK_DOWN;
+
+	/* Check if physical ports are trunked */
+	if (bf_get(lpfc_conf_trunk_port0, &phba->sli4_hba))
+		phba->trunk_link.link0.state = LPFC_LINK_DOWN;
+	if (bf_get(lpfc_conf_trunk_port1, &phba->sli4_hba))
+		phba->trunk_link.link1.state = LPFC_LINK_DOWN;
+	if (bf_get(lpfc_conf_trunk_port2, &phba->sli4_hba))
+		phba->trunk_link.link2.state = LPFC_LINK_DOWN;
+	if (bf_get(lpfc_conf_trunk_port3, &phba->sli4_hba))
+		phba->trunk_link.link3.state = LPFC_LINK_DOWN;
 	spin_unlock_irq(&phba->hbalock);
+
 	if (!(phba->hba_flag & HBA_FCOE_MODE) &&
 	    (phba->hba_flag & LINK_DISABLED)) {
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT | LOG_SLI,

drivers/scsi/lpfc/lpfc_sli4.h

@@ -718,6 +718,19 @@ struct lpfc_sli4_hba {
 	uint16_t num_online_cpu;
 	uint16_t num_present_cpu;
 	uint16_t curr_disp_cpu;
+	uint32_t conf_trunk;
+#define lpfc_conf_trunk_port0_WORD	conf_trunk
+#define lpfc_conf_trunk_port0_SHIFT	0
+#define lpfc_conf_trunk_port0_MASK	0x1
+#define lpfc_conf_trunk_port1_WORD	conf_trunk
+#define lpfc_conf_trunk_port1_SHIFT	1
+#define lpfc_conf_trunk_port1_MASK	0x1
+#define lpfc_conf_trunk_port2_WORD	conf_trunk
+#define lpfc_conf_trunk_port2_SHIFT	2
+#define lpfc_conf_trunk_port2_MASK	0x1
+#define lpfc_conf_trunk_port3_WORD	conf_trunk
+#define lpfc_conf_trunk_port3_SHIFT	3
+#define lpfc_conf_trunk_port3_MASK	0x1
 };
 
 enum lpfc_sge_type {