Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (110 commits)
  sh: i2c-sh7760: Replase from ctrl_* to __raw_*
  sh: clkfwk: Shuffle around to match the intc split up.
  sh: clkfwk: modify for_each_frequency end condition
  sh: fix clk_get() error handling
  sh: clkfwk: Fix fault in frequency iterator.
  sh: clkfwk: Add a helper for rate rounding by divisor ranges.
  sh: clkfwk: Abstract rate rounding helper.
  sh: clkfwk: support clock remapping.
  sh: pci: Convert to upper/lower_32_bits() helpers.
  sh: mach-sdk7786: Add support for the FPGA SRAM.
  sh: Provide a generic SRAM pool for tiny memories.
  sh: pci: Support secondary FPGA-driven PCIe clocks on SDK7786.
  sh: pci: Support slot 4 routing on SDK7786.
  sh: Fix up PMB locking.
  sh: mach-sdk7786: Add support for fpga gpios.
  sh: use pr_fmt for clock framework, too.
  sh: remove name and id from struct clk
  sh: free-without-alloc fix for sh_mobile_lcdcfb
  sh: perf: Set up perf_max_events.
  sh: perf: Support SH-X3 hardware counters.
  ...

Fix up trivial conflicts (perf_max_events got removed) in arch/sh/kernel/perf_event.c

arch/sh/Kconfig

@@ -24,6 +24,7 @@ config SUPERH
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_LZO
 	select HAVE_SYSCALL_TRACEPOINTS
+	select HAVE_REGS_AND_STACK_ACCESS_API
 	select RTC_LIB
 	select GENERIC_ATOMIC64
 	help
@@ -46,7 +47,7 @@ config SUPERH32
 	select HAVE_ARCH_KGDB
 	select HAVE_HW_BREAKPOINT
 	select HAVE_MIXED_BREAKPOINTS_REGS
-	select PERF_EVENTS if HAVE_HW_BREAKPOINT
+	select PERF_EVENTS
 	select ARCH_HIBERNATION_POSSIBLE if MMU
 
 config SUPERH64
@@ -471,6 +472,7 @@ config CPU_SUBTYPE_SHX3
 	select CPU_SH4A
 	select CPU_SHX3
 	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
+	select ARCH_REQUIRE_GPIOLIB
 
 # SH4AL-DSP Processor Support
 
@@ -575,7 +577,7 @@ config SH_CLK_CPG
 config SH_CLK_CPG_LEGACY
 	depends on SH_CLK_CPG
 	def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE && \
-		      !CPU_SUBTYPE_SH7786
+		      !CPU_SHX3 && !CPU_SUBTYPE_SH7757
 
 config SH_CLK_MD
 	int "CPU Mode Pin Setting"

arch/sh/boards/Kconfig

@@ -155,6 +155,8 @@ config SH_SDK7786
 	depends on CPU_SUBTYPE_SH7786
 	select SYS_SUPPORTS_PCI
 	select NO_IOPORT if !PCI
+	select ARCH_WANT_OPTIONAL_GPIOLIB
+	select HAVE_SRAM_POOL
 	help
 	  Select SDK7786 if configuring for a Renesas Technology Europe
 	  SH7786-65nm board.
@@ -165,6 +167,11 @@ config SH_HIGHLANDER
 	select SYS_SUPPORTS_PCI
 	select IO_TRAPPED if MMU
 
+config SH_SH7757LCR
+	bool "SH7757LCR"
+	depends on CPU_SUBTYPE_SH7757
+	select ARCH_REQUIRE_GPIOLIB
+
 config SH_SH7785LCR
 	bool "SH7785LCR"
 	depends on CPU_SUBTYPE_SH7785
@@ -309,6 +316,17 @@ config SH_POLARIS
 	help
 	  Select if configuring for an SMSC Polaris development board
 
+config SH_SH2007
+	bool "SH-2007 board"
+	select NO_IOPORT
+	depends on CPU_SUBTYPE_SH7780
+	help
+	  SH-2007 is a single-board computer based around SH7780 chip
+	  intended for embedded applications.
+	  It has an Ethernet interface (SMC9118), direct connected
+	  Compact Flash socket, two serial ports and PC-104 bus.
+	  More information at <http://sh2000.sh-linux.org>.
+
 endmenu
 
 source "arch/sh/boards/mach-r2d/Kconfig"

arch/sh/boards/Makefile

@@ -2,6 +2,7 @@
 # Specific board support, not covered by a mach group.
 #
 obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
+obj-$(CONFIG_SH_SH2007)		+= board-sh2007.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
 obj-$(CONFIG_SH_URQUELL)	+= board-urquell.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
@@ -9,3 +10,4 @@ obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o
 obj-$(CONFIG_SH_ESPT)		+= board-espt.o
 obj-$(CONFIG_SH_POLARIS)	+= board-polaris.o
 obj-$(CONFIG_SH_TITAN)		+= board-titan.o
+obj-$(CONFIG_SH_SH7757LCR)	+= board-sh7757lcr.o

arch/sh/boards/board-sh2007.c

+/*
+ * SH-2007 board support.
+ *
+ * Copyright (C) 2003, 2004  SUGIOKA Toshinobu
+ * Copyright (C) 2010  Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/io.h>
+#include <asm/machvec.h>
+#include <mach/sh2007.h>
+
+struct smsc911x_platform_config smc911x_info = {
+	.flags		= SMSC911X_USE_32BIT,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct resource smsc9118_0_resources[] = {
+	[0] = {
+		.start	= SMC0_BASE,
+		.end	= SMC0_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x240),
+		.end	= evt2irq(0x240),
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct resource smsc9118_1_resources[] = {
+	[0] = {
+		.start	= SMC1_BASE,
+		.end	= SMC1_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x280),
+		.end	= evt2irq(0x280),
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device smsc9118_0_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smsc9118_0_resources),
+	.resource	= smsc9118_0_resources,
+	.dev = {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct platform_device smsc9118_1_device = {
+	.name		= "smsc911x",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(smsc9118_1_resources),
+	.resource	= smsc9118_1_resources,
+	.dev = {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct resource cf_resources[] = {
+	[0] = {
+		.start	= CF_BASE + CF_OFFSET,
+		.end	= CF_BASE + CF_OFFSET + 0x0f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= CF_BASE + CF_OFFSET + 0x206,
+		.end	= CF_BASE + CF_OFFSET + 0x20f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= evt2irq(0x2c0),
+		.end	= evt2irq(0x2c0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device cf_device  = {
+	.name		= "pata_platform",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cf_resources),
+	.resource	= cf_resources,
+};
+
+static struct platform_device *sh2007_devices[] __initdata = {
+	&smsc9118_0_device,
+	&smsc9118_1_device,
+	&cf_device,
+};
+
+static int __init sh2007_io_init(void)
+{
+	platform_add_devices(sh2007_devices, ARRAY_SIZE(sh2007_devices));
+	return 0;
+}
+subsys_initcall(sh2007_io_init);
+
+static void __init sh2007_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+/*
+ * Initialize the board
+ */
+static void __init sh2007_setup(char **cmdline_p)
+{
+	printk(KERN_INFO "SH-2007 Setup...");
+
+	/* setup wait control registers for area 5 */
+	__raw_writel(CS5BCR_D, CS5BCR);
+	__raw_writel(CS5WCR_D, CS5WCR);
+	__raw_writel(CS5PCR_D, CS5PCR);
+
+	printk(KERN_INFO " done.\n");
+}
+
+/*
+ * The Machine Vector
+ */
+struct sh_machine_vector mv_sh2007 __initmv = {
+	.mv_setup		= sh2007_setup,
+	.mv_name		= "sh2007",
+	.mv_init_irq		= sh2007_init_irq,
+};

arch/sh/boards/mach-ecovec24/setup.c

@@ -1248,14 +1248,14 @@ static int __init arch_setup(void)
 
 	/* set SPU2 clock to 83.4 MHz */
 	clk = clk_get(NULL, "spu_clk");
-	if (clk) {
+	if (!IS_ERR(clk)) {
 		clk_set_rate(clk, clk_round_rate(clk, 83333333));
 		clk_put(clk);
 	}
 
 	/* change parent of FSI B */
 	clk = clk_get(NULL, "fsib_clk");
-	if (clk) {
+	if (!IS_ERR(clk)) {
 		clk_register(&fsimckb_clk);
 		clk_set_parent(clk, &fsimckb_clk);
 		clk_set_rate(clk, 11000);
@@ -1273,7 +1273,7 @@ static int __init arch_setup(void)
 
 	/* set VPU clock to 166 MHz */
 	clk = clk_get(NULL, "vpu_clk");
-	if (clk) {
+	if (!IS_ERR(clk)) {
 		clk_set_rate(clk, clk_round_rate(clk, 166000000));
 		clk_put(clk);
 	}

arch/sh/boards/mach-sdk7786/Makefile

-obj-y	:= setup.o fpga.o irq.o
+obj-y	:= fpga.o irq.o setup.o
+
+obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
+obj-$(CONFIG_HAVE_SRAM_POOL)	+= sram.o

arch/sh/boards/mach-sdk7786/gpio.c

+/*
+ * SDK7786 FPGA USRGPIR Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <mach/fpga.h>
+
+#define NR_FPGA_GPIOS	8
+
+static const char *usrgpir_gpio_names[NR_FPGA_GPIOS] = {
+	"in0", "in1", "in2", "in3", "in4", "in5", "in6", "in7",
+};
+
+static int usrgpir_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	/* always in */
+	return 0;
+}
+
+static int usrgpir_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+	return !!(fpga_read_reg(USRGPIR) & (1 << gpio));
+}
+
+static struct gpio_chip usrgpir_gpio_chip = {
+	.label			= "sdk7786-fpga",
+	.names			= usrgpir_gpio_names,
+	.direction_input	= usrgpir_gpio_direction_input,
+	.get			= usrgpir_gpio_get,
+	.base			= -1, /* don't care */
+	.ngpio			= NR_FPGA_GPIOS,
+};
+
+static int __init usrgpir_gpio_setup(void)
+{
+	return gpiochip_add(&usrgpir_gpio_chip);
+}
+device_initcall(usrgpir_gpio_setup);

arch/sh/boards/mach-sdk7786/setup.c

@@ -20,6 +20,8 @@
 #include <asm/machvec.h>
 #include <asm/heartbeat.h>
 #include <asm/sizes.h>
+#include <asm/clock.h>
+#include <asm/clkdev.h>
 #include <asm/reboot.h>
 #include <asm/smp-ops.h>
 
@@ -140,6 +142,45 @@ static int sdk7786_mode_pins(void)
 	return fpga_read_reg(MODSWR);
 }
 
+/*
+ * FPGA-driven PCIe clocks
+ *
+ * Historically these include the oscillator, clock B (slots 2/3/4) and
+ * clock A (slot 1 and the CPU clock). Newer revs of the PCB shove
+ * everything under a single PCIe clocks enable bit that happens to map
+ * to the same bit position as the oscillator bit for earlier FPGA
+ * versions.
+ *
+ * Given that the legacy clocks have the side-effect of shutting the CPU
+ * off through the FPGA along with the PCI slots, we simply leave them in
+ * their initial state and don't bother registering them with the clock
+ * framework.
+ */
+static int sdk7786_pcie_clk_enable(struct clk *clk)
+{
+	fpga_write_reg(fpga_read_reg(PCIECR) | PCIECR_CLKEN, PCIECR);
+	return 0;
+}
+
+static void sdk7786_pcie_clk_disable(struct clk *clk)
+{
+	fpga_write_reg(fpga_read_reg(PCIECR) & ~PCIECR_CLKEN, PCIECR);
+}
+
+static struct clk_ops sdk7786_pcie_clk_ops = {
+	.enable		= sdk7786_pcie_clk_enable,
+	.disable	= sdk7786_pcie_clk_disable,
+};
+
+static struct clk sdk7786_pcie_clk = {
+	.ops		= &sdk7786_pcie_clk_ops,
+};
+
+static struct clk_lookup sdk7786_pcie_cl = {
+	.con_id		= "pcie_plat_clk",
+	.clk		= &sdk7786_pcie_clk,
+};
+
 static int sdk7786_clk_init(void)
 {
 	struct clk *clk;
@@ -158,7 +199,18 @@ static int sdk7786_clk_init(void)
 	ret = clk_set_rate(clk, 33333333);
 	clk_put(clk);
 
-	return ret;
+	/*
+	 * Setup the FPGA clocks.
+	 */
+	ret = clk_register(&sdk7786_pcie_clk);
+	if (unlikely(ret)) {
+		pr_err("FPGA clock registration failed\n");
+		return ret;
+	}
+
+	clkdev_add(&sdk7786_pcie_cl);
+
+	return 0;
 }
 
 static void sdk7786_restart(char *cmd)

arch/sh/boards/mach-sdk7786/sram.c

+/*
+ * SDK7786 FPGA SRAM Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/string.h>
+#include <mach/fpga.h>
+#include <asm/sram.h>
+#include <asm/sizes.h>
+
+static int __init fpga_sram_init(void)
+{
+	unsigned long phys;
+	unsigned int area;
+	void __iomem *vaddr;
+	int ret;
+	u16 data;
+
+	/* Enable FPGA SRAM */
+	data = fpga_read_reg(LCLASR);
+	data |= LCLASR_FRAMEN;
+	fpga_write_reg(data, LCLASR);
+
+	/*
+	 * FPGA_SEL determines the area mapping
+	 */
+	area = (data & LCLASR_FPGA_SEL_MASK) >> LCLASR_FPGA_SEL_SHIFT;
+	if (unlikely(area == LCLASR_AREA_MASK)) {
+		pr_err("FPGA memory unmapped.\n");
+		return -ENXIO;
+	}
+
+	/*
+	 * The memory itself occupies a 2KiB range at the top of the area
+	 * immediately below the system registers.
+	 */
+	phys = (area << 26) + SZ_64M - SZ_4K;
+
+	/*
+	 * The FPGA SRAM resides in translatable physical space, so set
+	 * up a mapping prior to inserting it in to the pool.
+	 */
+	vaddr = ioremap(phys, SZ_2K);
+	if (unlikely(!vaddr)) {
+		pr_err("Failed remapping FPGA memory.\n");
+		return -ENXIO;
+	}
+
+	pr_info("Adding %dKiB of FPGA memory at 0x%08lx-0x%08lx "
+		"(area %d) to pool.\n",
+		SZ_2K >> 10, phys, phys + SZ_2K - 1, area);
+
+	ret = gen_pool_add(sram_pool, (unsigned long)vaddr, SZ_2K, -1);
+	if (unlikely(ret < 0)) {
+		pr_err("Failed adding memory\n");
+		iounmap(vaddr);
+		return ret;
+	}
+
+	return 0;
+}
+postcore_initcall(fpga_sram_init);

arch/sh/boards/mach-x3proto/Makefile

 obj-y += setup.o ilsel.o
+
+obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o

arch/sh/boards/mach-x3proto/gpio.c

+/*
+ * arch/sh/boards/mach-x3proto/gpio.c
+ *
+ * Renesas SH-X3 Prototype Baseboard GPIO Support.
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <mach/ilsel.h>
+#include <mach/hardware.h>
+
+#define KEYCTLR	0xb81c0000
+#define KEYOUTR	0xb81c0002
+#define KEYDETR 0xb81c0004
+
+static DEFINE_SPINLOCK(x3proto_gpio_lock);
+static unsigned int x3proto_gpio_irq_map[NR_BASEBOARD_GPIOS] = { 0, };
+
+static int x3proto_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
+{
+	unsigned long flags;
+	unsigned int data;
+
+	spin_lock_irqsave(&x3proto_gpio_lock, flags);
+	data = __raw_readw(KEYCTLR);
+	data |= (1 << gpio);
+	__raw_writew(data, KEYCTLR);
+	spin_unlock_irqrestore(&x3proto_gpio_lock, flags);
+
+	return 0;
+}
+
+static int x3proto_gpio_get(struct gpio_chip *chip, unsigned gpio)
+{
+	return !!(__raw_readw(KEYDETR) & (1 << gpio));
+}
+
+static int x3proto_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
+{
+	return x3proto_gpio_irq_map[gpio];
+}
+
+static void x3proto_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = get_irq_desc_chip(desc);
+	unsigned long mask;
+	int pin;
+
+	chip->mask_ack(irq);
+
+	mask = __raw_readw(KEYDETR);
+
+	for_each_set_bit(pin, &mask, NR_BASEBOARD_GPIOS)
+		generic_handle_irq(x3proto_gpio_to_irq(NULL, pin));
+
+	chip->unmask(irq);
+}
+
+struct gpio_chip x3proto_gpio_chip = {
+	.label			= "x3proto-gpio",
+	.direction_input	= x3proto_gpio_direction_input,
+	.get			= x3proto_gpio_get,
+	.to_irq			= x3proto_gpio_to_irq,
+	.base			= -1,
+	.ngpio			= NR_BASEBOARD_GPIOS,
+};
+
+int __init x3proto_gpio_setup(void)
+{
+	int ilsel;
+	int ret, i;
+
+	ilsel = ilsel_enable(ILSEL_KEY);
+	if (unlikely(ilsel < 0))
+		return ilsel;
+
+	ret = gpiochip_add(&x3proto_gpio_chip);
+	if (unlikely(ret))
+		goto err_gpio;
+
+	for (i = 0; i < NR_BASEBOARD_GPIOS; i++) {
+		unsigned long flags;
+		int irq = create_irq();
+
+		if (unlikely(irq < 0)) {
+			ret = -EINVAL;
+			goto err_irq;
+		}
+
+		spin_lock_irqsave(&x3proto_gpio_lock, flags);
+		x3proto_gpio_irq_map[i] = irq;
+		set_irq_chip_and_handler_name(irq, &dummy_irq_chip,
+					handle_simple_irq, "gpio");
+		spin_unlock_irqrestore(&x3proto_gpio_lock, flags);
+	}
+
+	pr_info("registering '%s' support, handling GPIOs %u -> %u, "
+		"bound to IRQ %u\n",
+		x3proto_gpio_chip.label, x3proto_gpio_chip.base,
+		x3proto_gpio_chip.base + x3proto_gpio_chip.ngpio,
+		ilsel);
+
+	set_irq_chained_handler(ilsel, x3proto_gpio_irq_handler);
+	set_irq_wake(ilsel, 1);
+
+	return 0;
+
+err_irq:
+	for (; i >= 0; --i)
+		if (x3proto_gpio_irq_map[i])
+			destroy_irq(x3proto_gpio_irq_map[i]);
+
+	ret = gpiochip_remove(&x3proto_gpio_chip);
+	if (unlikely(ret))
+		pr_err("Failed deregistering GPIO\n");
+
+err_gpio:
+	synchronize_irq(ilsel);
+
+	ilsel_disable(ILSEL_KEY);
+
+	return ret;
+}

arch/sh/boards/mach-x3proto/ilsel.c

 /*
- * arch/sh/boards/renesas/x3proto/ilsel.c
+ * arch/sh/boards/mach-x3proto/ilsel.c
  *
  * Helper routines for SH-X3 proto board ILSEL.
  *
- * Copyright (C) 2007 Paul Mundt
+ * Copyright (C) 2007 - 2010  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/bitmap.h>
 #include <linux/io.h>
-#include <asm/ilsel.h>
+#include <mach/ilsel.h>
 
 /*
  * ILSEL is split across:
@@ -64,6 +66,8 @@ static void __ilsel_enable(ilsel_source_t set, unsigned int bit)
 	unsigned int tmp, shift;
 	unsigned long addr;
 
+	pr_notice("enabling ILSEL set %d\n", set);
+
 	addr = mk_ilsel_addr(bit);
 	shift = mk_ilsel_shift(bit);
 
@@ -92,8 +96,10 @@ int ilsel_enable(ilsel_source_t set)
 {
 	unsigned int bit;
 
-	/* Aliased sources must use ilsel_enable_fixed() */
-	BUG_ON(set > ILSEL_KEY);
+	if (unlikely(set > ILSEL_KEY)) {
+		pr_err("Aliased sources must use ilsel_enable_fixed()\n");
+		return -EINVAL;
+	}
 
 	do {
 		bit = find_first_zero_bit(&ilsel_level_map, ILSEL_LEVELS);
@@ -140,6 +146,8 @@ void ilsel_disable(unsigned int irq)
 	unsigned long addr;
 	unsigned int tmp;
 
+	pr_notice("disabling ILSEL set %d\n", irq);
+
 	addr = mk_ilsel_addr(irq);
 
 	tmp = __raw_readw(addr);

arch/sh/boards/mach-x3proto/setup.c

 /*
- * arch/sh/boards/renesas/x3proto/setup.c
+ * arch/sh/boards/mach-x3proto/setup.c
  *
  * Renesas SH-X3 Prototype Board Support.
  *
- * Copyright (C) 2007 - 2008 Paul Mundt
+ * Copyright (C) 2007 - 2010  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -16,9 +16,13 @@
 #include <linux/smc91x.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/input.h>
 #include <linux/usb/r8a66597.h>
 #include <linux/usb/m66592.h>
-#include <asm/ilsel.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <mach/ilsel.h>
+#include <mach/hardware.h>
 #include <asm/smp-ops.h>
 
 static struct resource heartbeat_resources[] = {
@@ -122,15 +126,128 @@ static struct platform_device m66592_usb_peripheral_device = {
 	.resource	= m66592_usb_peripheral_resources,
 };
 
+static struct gpio_keys_button baseboard_buttons[NR_BASEBOARD_GPIOS] = {
+	{
+		.desc		= "key44",
+		.code		= KEY_POWER,
+		.active_low	= 1,
+		.wakeup		= 1,
+	}, {
+		.desc		= "key43",
+		.code		= KEY_SUSPEND,
+		.active_low	= 1,
+		.wakeup		= 1,
+	}, {
+		.desc		= "key42",
+		.code		= KEY_KATAKANAHIRAGANA,
+		.active_low	= 1,
+	}, {
+		.desc		= "key41",
+		.code		= KEY_SWITCHVIDEOMODE,
+		.active_low	= 1,
+	}, {
+		.desc		= "key34",
+		.code		= KEY_F12,
+		.active_low	= 1,
+	}, {
+		.desc		= "key33",
+		.code		= KEY_F11,
+		.active_low	= 1,
+	}, {
+		.desc		= "key32",
+		.code		= KEY_F10,
+		.active_low	= 1,
+	}, {
+		.desc		= "key31",
+		.code		= KEY_F9,
+		.active_low	= 1,
+	}, {
+		.desc		= "key24",
+		.code		= KEY_F8,
+		.active_low	= 1,
+	}, {
+		.desc		= "key23",
+		.code		= KEY_F7,
+		.active_low	= 1,
+	}, {
+		.desc		= "key22",
+		.code		= KEY_F6,
+		.active_low	= 1,
+	}, {
+		.desc		= "key21",
+		.code		= KEY_F5,
+		.active_low	= 1,
+	}, {
+		.desc		= "key14",
+		.code		= KEY_F4,
+		.active_low	= 1,
+	}, {
+		.desc		= "key13",
+		.code		= KEY_F3,
+		.active_low	= 1,
+	}, {
+		.desc		= "key12",
+		.code		= KEY_F2,
+		.active_low	= 1,
+	}, {
+		.desc		= "key11",
+		.code		= KEY_F1,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data baseboard_buttons_data = {
+	.buttons	= baseboard_buttons,
+	.nbuttons	= ARRAY_SIZE(baseboard_buttons),
+};
+
+static struct platform_device baseboard_buttons_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &baseboard_buttons_data,
+	},
+};
+
 static struct platform_device *x3proto_devices[] __initdata = {
 	&heartbeat_device,
 	&smc91x_device,
 	&r8a66597_usb_host_device,
 	&m66592_usb_peripheral_device,
+	&baseboard_buttons_device,
 };
 
+static void __init x3proto_init_irq(void)
+{
+	plat_irq_setup_pins(IRQ_MODE_IRL3210);
+
+	/* Set ICR0.LVLMODE */
+	__raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
+}
+
 static int __init x3proto_devices_setup(void)
 {
+	int ret, i;
+
+	/*
+	 * IRLs are only needed for ILSEL mappings, so flip over the INTC
+	 * pins at a later point to enable the GPIOs to settle.
+	 */
+	x3proto_init_irq();
+
+	/*
+	 * Now that ILSELs are available, set up the baseboard GPIOs.
+	 */
+	ret = x3proto_gpio_setup();
+	if (unlikely(ret))
+		return ret;
+
+	/*
+	 * Propagate dynamic GPIOs for the baseboard button device.
+	 */
+	for (i = 0; i < ARRAY_SIZE(baseboard_buttons); i++)
+		baseboard_buttons[i].gpio = x3proto_gpio_chip.base + i;
+
 	r8a66597_usb_host_resources[1].start =
 		r8a66597_usb_host_resources[1].end = ilsel_enable(ILSEL_USBH_I);
 
@@ -145,14 +262,6 @@ static int __init x3proto_devices_setup(void)
 }
 device_initcall(x3proto_devices_setup);
 
-static void __init x3proto_init_irq(void)
-{
-	plat_irq_setup_pins(IRQ_MODE_IRL3210);
-
-	/* Set ICR0.LVLMODE */
-	__raw_writel(__raw_readl(0xfe410000) | (1 << 21), 0xfe410000);
-}
-
 static void __init x3proto_setup(char **cmdline_p)
 {
 	register_smp_ops(&shx3_smp_ops);
@@ -161,5 +270,4 @@ static void __init x3proto_setup(char **cmdline_p)
 static struct sh_machine_vector mv_x3proto __initmv = {
 	.mv_name		= "x3proto",
 	.mv_setup		= x3proto_setup,
-	.mv_init_irq		= x3proto_init_irq,
 };

arch/sh/boot/compressed/head_32.S

@@ -91,7 +91,9 @@ bss_start_addr:
 end_addr:
 	.long	_end
 init_sr:
-	.long	0x400000F0	/* Privileged mode, Bank=0, Block=0, IMASK=0xF */
+	.long	0x500000F0	/* Privileged mode, Bank=0, Block=1, IMASK=0xF */
+kexec_magic:
+	.long	0x400000F0	/* magic used by kexec to parse zImage format */
 init_stack_addr:
 	.long	stack_start
 decompress_kernel_addr:

arch/sh/cchips/hd6446x/Makefile

 obj-$(CONFIG_HD64461)	+= hd64461.o
 
-EXTRA_CFLAGS += -Werror
+ccflags-y := -Werror

arch/sh/configs/ap325rxa_defconfig

@@ -3,7 +3,6 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_KALLSYMS is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/sh/configs/cayman_defconfig

 CONFIG_EXPERIMENTAL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/sh/configs/dreamcast_defconfig

@@ -2,7 +2,6 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y

arch/sh/configs/ecovec24-romimage_defconfig

@@ -5,7 +5,6 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_KALLSYMS is not set
 CONFIG_SLAB=y

arch/sh/configs/edosk7760_defconfig

@@ -5,7 +5,6 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y

arch/sh/configs/espt_defconfig

@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_NAMESPACES=y
 CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y

arch/sh/configs/hp6xx_defconfig

@@ -3,7 +3,6 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_SLAB=y

arch/sh/configs/kfr2r09-romimage_defconfig

@@ -5,7 +5,6 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_KALLSYMS is not set
 CONFIG_SLAB=y

arch/sh/configs/kfr2r09_defconfig

@@ -5,7 +5,6 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_KALLSYMS is not set
 CONFIG_SLAB=y

arch/sh/configs/landisk_defconfig

 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_SLAB=y

arch/sh/configs/lboxre2_defconfig

 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_SLAB=y

arch/sh/configs/magicpanelr2_defconfig

@@ -5,7 +5,6 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_AUDIT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

arch/sh/configs/microdev_defconfig

 CONFIG_EXPERIMENTAL=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_SYSCTL_SYSCALL is not set

arch/sh/configs/migor_defconfig

@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_SYSCTL_SYSCALL is not set

arch/sh/configs/polaris_defconfig

@@ -7,7 +7,6 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_AUDIT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/sh/configs/r7780mp_defconfig

@@ -4,7 +4,6 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set

arch/sh/configs/r7785rp_defconfig

@@ -8,7 +8,6 @@ CONFIG_RCU_TRACE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y

arch/sh/configs/rts7751r2d1_defconfig

 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_SLAB=y

arch/sh/configs/rts7751r2dplus_defconfig

 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_SLAB=y

arch/sh/configs/sdk7780_defconfig

@@ -6,7 +6,6 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_MODULES=y

arch/sh/configs/se7343_defconfig

@@ -3,7 +3,6 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set

arch/sh/configs/se7712_defconfig

@@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_BUG is not set

arch/sh/configs/se7721_defconfig

@@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_BUG is not set

arch/sh/configs/se7722_defconfig

@@ -4,7 +4,6 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PROFILING=y
 CONFIG_MODULES=y

arch/sh/configs/se7724_defconfig

@@ -3,7 +3,6 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_KALLSYMS is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y

arch/sh/configs/se7750_defconfig

@@ -5,7 +5,6 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_HOTPLUG is not set

arch/sh/configs/se7751_defconfig

@@ -2,7 +2,6 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_SYSCTL_SYSCALL is not set

arch/sh/configs/se7780_defconfig

@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_KALLSYMS is not set
 # CONFIG_HOTPLUG is not set
 # CONFIG_EPOLL is not set

arch/sh/configs/sh03_defconfig

@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_SLAB=y

arch/sh/configs/sh2007_defconfig

+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
+CONFIG_IKCONFIG=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_KALLSYMS_ALL=y
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7780=y
+CONFIG_MEMORY_SIZE=0x08000000
+# CONFIG_VSYSCALL is not set
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_SH2007=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SH_DMA=y
+CONFIG_SH_DMA_API=y
+CONFIG_NR_DMA_CHANNELS_BOOL=y
+CONFIG_HZ_100=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC1,115200 ip=dhcp root=/dev/nfs rw nfsroot=/nfs/rootfs,rsize=1024,wsize=1024 earlyprintk=sh-sci.1"
+CONFIG_PCCARD=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_NET_IPIP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NET_PKTGEN=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_CDROM_PKTCDVD=y
+# CONFIG_MISC_DEVICES is not set
+CONFIG_RAID_ATTRS=y
+CONFIG_SCSI=y
+CONFIG_SCSI_TGT=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_SPI_ATTRS=y
+CONFIG_SCSI_FC_ATTRS=y
+CONFIG_SCSI_ISCSI_ATTRS=y
+CONFIG_SCSI_SRP_ATTRS=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+CONFIG_EQUALIZER=y
+CONFIG_TUN=y
+CONFIG_VETH=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMSC911X=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_SH_WDT=y
+CONFIG_SSB=y
+CONFIG_FB=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_MON=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_DMADEVICES=y
+CONFIG_TIMB_DMA=y
+CONFIG_EXT3_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=932
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+CONFIG_NLS_CODEPAGE_1250=y
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SH_STANDARD_BIOS=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_AUTHENC=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_CAMELLIA=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_FCRYPT=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_SEED=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_LIBCRC32C=y

arch/sh/configs/sh7710voipgw_defconfig

@@ -3,7 +3,6 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set

arch/sh/configs/sh7757lcr_defconfig

+CONFIG_EXPERIMENTAL=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS_ALL=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7757=y
+CONFIG_MEMORY_START=0x40000000
+CONFIG_MEMORY_SIZE=0x0f000000
+CONFIG_PMB=y
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_SH7757LCR=y
+CONFIG_HEARTBEAT=y
+CONFIG_SECCOMP=y
+CONFIG_CMDLINE_OVERWRITE=y
+CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/nfs ip=dhcp"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_BLK_DEV_RAM=y
+# CONFIG_MISC_DEVICES is not set
+CONFIG_NETDEVICES=y
+CONFIG_PHYLIB=y
+CONFIG_VITESSE_PHY=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=3
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_INOTIFY=y
+CONFIG_ISO9660_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_SQUASHFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/sh/configs/sh7763rdp_defconfig

@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_NAMESPACES=y
 CONFIG_UTS_NS=y
 CONFIG_IPC_NS=y

arch/sh/configs/sh7785lcr_defconfig

@@ -4,7 +4,6 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
 CONFIG_MODULES=y

arch/sh/configs/shx3_defconfig

@@ -15,7 +15,6 @@ CONFIG_CGROUP_DEVICE=y
 CONFIG_CGROUP_CPUACCT=y
 CONFIG_RESOURCE_COUNTERS=y
 CONFIG_CGROUP_MEM_RES_CTLR=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
 CONFIG_UTS_NS=y

arch/sh/configs/snapgear_defconfig

 CONFIG_EXPERIMENTAL=y
 # CONFIG_SWAP is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_HOTPLUG is not set

arch/sh/configs/systemh_defconfig

 CONFIG_EXPERIMENTAL=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_SYSCTL_SYSCALL is not set

arch/sh/configs/titan_defconfig

@@ -5,7 +5,6 @@ CONFIG_POSIX_MQUEUE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 # CONFIG_SYSCTL_SYSCALL is not set

arch/sh/configs/ul2_defconfig

@@ -4,7 +4,6 @@ CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_PROFILING=y
 CONFIG_MODULES=y

arch/sh/drivers/dma/dma-api.c

@@ -412,8 +412,8 @@ EXPORT_SYMBOL(unregister_dmac);
 static int __init dma_api_init(void)
 {
 	printk(KERN_NOTICE "DMA: Registering DMA API.\n");
-	create_proc_read_entry("dma", 0, 0, dma_read_proc, 0);
-	return 0;
+	return create_proc_read_entry("dma", 0, 0, dma_read_proc, 0)
+		    ? 0 : -ENOMEM;
 }
 subsys_initcall(dma_api_init);
 

arch/sh/drivers/pci/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_SH_RTS7751R2D)		+= fixups-rts7751r2d.o
 obj-$(CONFIG_SH_SH03)			+= fixups-sh03.o
 obj-$(CONFIG_SH_HIGHLANDER)		+= fixups-r7780rp.o
 obj-$(CONFIG_SH_SH7785LCR)		+= fixups-r7780rp.o
+obj-$(CONFIG_SH_SDK7786)		+= fixups-sdk7786.o
 obj-$(CONFIG_SH_SDK7780)		+= fixups-sdk7780.o
 obj-$(CONFIG_SH_7780_SOLUTION_ENGINE)	+= fixups-sdk7780.o
 obj-$(CONFIG_SH_TITAN)			+= fixups-titan.o

arch/sh/drivers/pci/fixups-sdk7786.c

+/*
+ * SDK7786 FPGA PCIe mux handling
+ *
+ * Copyright (C) 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#define pr_fmt(fmt) "PCI: " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <mach/fpga.h>
+
+/*
+ * The SDK7786 FPGA supports mangling of most of the slots in some way or
+ * another. Slots 3/4 are special in that only one can be supported at a
+ * time, and both appear on port 3 to the PCI bus scan. Enabling slot 4
+ * (the horizontal edge connector) will disable slot 3 entirely.
+ *
+ * Misconfigurations can be detected through the FPGA via the slot
+ * resistors to determine card presence. Hotplug remains unsupported.
+ */
+static unsigned int slot4en __devinitdata;
+
+char *__devinit pcibios_setup(char *str)
+{
+	if (strcmp(str, "slot4en") == 0) {
+		slot4en = 1;
+		return NULL;
+	}
+
+	return str;
+}
+
+static int __init sdk7786_pci_init(void)
+{
+	u16 data = fpga_read_reg(PCIECR);
+
+	/*
+	 * Enable slot #4 if it's been specified on the command line.
+	 *
+	 * Optionally reroute if slot #4 has a card present while slot #3
+	 * does not, regardless of command line value.
+	 *
+	 * Card presence is logically inverted.
+	 */
+	slot4en ?: (!(data & PCIECR_PRST4) && (data & PCIECR_PRST3));
+	if (slot4en) {
+		pr_info("Activating PCIe slot#4 (disabling slot#3)\n");
+
+		data &= ~PCIECR_PCIEMUX1;
+		fpga_write_reg(data, PCIECR);
+
+		/* Warn about forced rerouting if slot#3 is occupied */
+		if ((data & PCIECR_PRST3) == 0) {
+			pr_warning("Unreachable card detected in slot#3\n");
+			return -EBUSY;
+		}
+	} else
+		pr_info("PCIe slot#4 disabled\n");
+
+	return 0;
+}
+postcore_initcall(sdk7786_pci_init);

arch/sh/drivers/pci/ops-sh4.c

@@ -9,6 +9,7 @@
  */
 #include <linux/pci.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
 #include <asm/addrspace.h>
 #include "pci-sh4.h"
 
@@ -18,8 +19,6 @@
 #define CONFIG_CMD(bus, devfn, where) \
 	(0x80000000 | (bus->number << 16) | (devfn << 8) | (where & ~3))
 
-static DEFINE_SPINLOCK(sh4_pci_lock);
-
 /*
  * Functions for accessing PCI configuration space with type 1 accesses
  */
@@ -34,10 +33,10 @@ static int sh4_pci_read(struct pci_bus *bus, unsigned int devfn,
 	 * PCIPDR may only be accessed as 32 bit words,
 	 * so we must do byte alignment by hand
 	 */
-	spin_lock_irqsave(&sh4_pci_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 	pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
 	data = pci_read_reg(chan, SH4_PCIPDR);
-	spin_unlock_irqrestore(&sh4_pci_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	switch (size) {
 	case 1:
@@ -69,10 +68,10 @@ static int sh4_pci_write(struct pci_bus *bus, unsigned int devfn,
 	int shift;
 	u32 data;
 
-	spin_lock_irqsave(&sh4_pci_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 	pci_write_reg(chan, CONFIG_CMD(bus, devfn, where), SH4_PCIPAR);
 	data = pci_read_reg(chan, SH4_PCIPDR);
-	spin_unlock_irqrestore(&sh4_pci_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 
 	switch (size) {
 	case 1:

arch/sh/drivers/pci/ops-sh7786.c

 /*
  * Generic SH7786 PCI-Express operations.
  *
- *  Copyright (C) 2009  Paul Mundt
+ *  Copyright (C) 2009 - 2010  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License v2. See the file "COPYING" in the main directory of this archive
@@ -19,37 +19,72 @@ enum {
 	PCI_ACCESS_WRITE,
 };
 
-static DEFINE_SPINLOCK(sh7786_pcie_lock);
-
 static int sh7786_pcie_config_access(unsigned char access_type,
 		struct pci_bus *bus, unsigned int devfn, int where, u32 *data)
 {
 	struct pci_channel *chan = bus->sysdata;
-	int dev, func;
+	int dev, func, type, reg;
 
 	dev = PCI_SLOT(devfn);
 	func = PCI_FUNC(devfn);
+	type = !!bus->parent;
+	reg = where & ~3;
 
 	if (bus->number > 255 || dev > 31 || func > 7)
 		return PCIBIOS_FUNC_NOT_SUPPORTED;
-	if (devfn)
-		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/*
+	 * While each channel has its own memory-mapped extended config
+	 * space, it's generally only accessible when in endpoint mode.
+	 * When in root complex mode, the controller is unable to target
+	 * itself with either type 0 or type 1 accesses, and indeed, any
+	 * controller initiated target transfer to its own config space
+	 * result in a completer abort.
+	 *
+	 * Each channel effectively only supports a single device, but as
+	 * the same channel <-> device access works for any PCI_SLOT()
+	 * value, we cheat a bit here and bind the controller's config
+	 * space to devfn 0 in order to enable self-enumeration. In this
+	 * case the regular PAR/PDR path is sidelined and the mangled
+	 * config access itself is initiated as a SuperHyway transaction.
+	 */
+	if (pci_is_root_bus(bus)) {
+		if (dev == 0) {
+			if (access_type == PCI_ACCESS_READ)
+				*data = pci_read_reg(chan, PCI_REG(reg));
+			else
+				pci_write_reg(chan, *data, PCI_REG(reg));
+
+			return PCIBIOS_SUCCESSFUL;
+		} else if (dev > 1)
+			return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	/* Clear errors */
+	pci_write_reg(chan, pci_read_reg(chan, SH4A_PCIEERRFR), SH4A_PCIEERRFR);
 
 	/* Set the PIO address */
 	pci_write_reg(chan, (bus->number << 24) | (dev << 19) |
-				(func << 16) | (where & ~3), SH4A_PCIEPAR);
+				(func << 16) | reg, SH4A_PCIEPAR);
 
 	/* Enable the configuration access */
-	pci_write_reg(chan, (1 << 31), SH4A_PCIEPCTLR);
+	pci_write_reg(chan, (1 << 31) | (type << 8), SH4A_PCIEPCTLR);
+
+	/* Check for errors */
+	if (pci_read_reg(chan, SH4A_PCIEERRFR) & 0x10)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	/* Check for master and target aborts */
+	if (pci_read_reg(chan, SH4A_PCIEPCICONF1) & ((1 << 29) | (1 << 28)))
+		return PCIBIOS_DEVICE_NOT_FOUND;
 
 	if (access_type == PCI_ACCESS_READ)
 		*data = pci_read_reg(chan, SH4A_PCIEPDR);
 	else
 		pci_write_reg(chan, *data, SH4A_PCIEPDR);
 
-	/* Check for master and target aborts */
-	if (pci_read_reg(chan, SH4A_PCIEPCICONF1) & ((1 << 29) | (1 << 28)))
-		return PCIBIOS_DEVICE_NOT_FOUND;
+	/* Disable the configuration access */
+	pci_write_reg(chan, 0, SH4A_PCIEPCTLR);
 
 	return PCIBIOS_SUCCESSFUL;
 }
@@ -66,11 +101,13 @@ static int sh7786_pcie_read(struct pci_bus *bus, unsigned int devfn,
 	else if ((size == 4) && (where & 3))
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
-	spin_lock_irqsave(&sh7786_pcie_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 	ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
 					devfn, where, &data);
-	if (ret != PCIBIOS_SUCCESSFUL)
+	if (ret != PCIBIOS_SUCCESSFUL) {
+		*val = 0xffffffff;
 		goto out;
+	}
 
 	if (size == 1)
 		*val = (data >> ((where & 3) << 3)) & 0xff;
@@ -84,7 +121,7 @@ static int sh7786_pcie_read(struct pci_bus *bus, unsigned int devfn,
 		devfn, where, size, (unsigned long)*val);
 
 out:
-	spin_unlock_irqrestore(&sh7786_pcie_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 	return ret;
 }
 
@@ -100,7 +137,7 @@ static int sh7786_pcie_write(struct pci_bus *bus, unsigned int devfn,
 	else if ((size == 4) && (where & 3))
 		return PCIBIOS_BAD_REGISTER_NUMBER;
 
-	spin_lock_irqsave(&sh7786_pcie_lock, flags);
+	raw_spin_lock_irqsave(&pci_config_lock, flags);
 	ret = sh7786_pcie_config_access(PCI_ACCESS_READ, bus,
 					devfn, where, &data);
 	if (ret != PCIBIOS_SUCCESSFUL)
@@ -124,7 +161,7 @@ static int sh7786_pcie_write(struct pci_bus *bus, unsigned int devfn,
 	ret = sh7786_pcie_config_access(PCI_ACCESS_WRITE, bus,
 					devfn, where, &data);
 out:
-	spin_unlock_irqrestore(&sh7786_pcie_lock, flags);
+	raw_spin_unlock_irqrestore(&pci_config_lock, flags);
 	return ret;
 }
 

arch/sh/drivers/pci/pci-sh7751.c

@@ -81,7 +81,7 @@ static int __init sh7751_pci_init(void)
 	unsigned int id;
 	u32 word, reg;
 
-	printk(KERN_NOTICE "PCI: Starting intialization.\n");
+	printk(KERN_NOTICE "PCI: Starting initialization.\n");
 
 	chan->reg_base = 0xfe200000;
 

arch/sh/drivers/pci/pci-sh7780.c

@@ -246,7 +246,7 @@ static int __init sh7780_pci_init(void)
 	const char *type;
 	int ret, i;
 
-	printk(KERN_NOTICE "PCI: Starting intialization.\n");
+	printk(KERN_NOTICE "PCI: Starting initialization.\n");
 
 	chan->reg_base = 0xfe040000;
 

arch/sh/drivers/pci/pci-sh7780.h

@@ -12,12 +12,6 @@
 #ifndef _PCI_SH7780_H_
 #define _PCI_SH7780_H_
 
-#define PCI_VENDOR_ID_RENESAS		0x1912
-#define PCI_DEVICE_ID_RENESAS_SH7781	0x0001
-#define PCI_DEVICE_ID_RENESAS_SH7780	0x0002
-#define PCI_DEVICE_ID_RENESAS_SH7763	0x0004
-#define PCI_DEVICE_ID_RENESAS_SH7785	0x0007
-
 /* SH7780 Control Registers */
 #define	PCIECR			0xFE000008
 #define PCIECR_ENBL		0x01

arch/sh/drivers/pci/pci.c

@@ -19,6 +19,7 @@
 #include <linux/dma-debug.h>
 #include <linux/io.h>
 #include <linux/mutex.h>
+#include <linux/spinlock.h>
 
 unsigned long PCIBIOS_MIN_IO = 0x0000;
 unsigned long PCIBIOS_MIN_MEM = 0;
@@ -56,6 +57,11 @@ static void __devinit pcibios_scanbus(struct pci_channel *hose)
 	}
 }
 
+/*
+ * This interrupt-safe spinlock protects all accesses to PCI
+ * configuration space.
+ */
+DEFINE_RAW_SPINLOCK(pci_config_lock);
 static DEFINE_MUTEX(pci_scan_mutex);
 
 int __devinit register_pci_controller(struct pci_channel *hose)
@@ -233,40 +239,7 @@ void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
 
 int pcibios_enable_device(struct pci_dev *dev, int mask)
 {
-	u16 cmd, old_cmd;
-	int idx;
-	struct resource *r;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-	old_cmd = cmd;
-	for (idx=0; idx < PCI_NUM_RESOURCES; idx++) {
-		/* Only set up the requested stuff */
-		if (!(mask & (1<<idx)))
-			continue;
-
-		r = &dev->resource[idx];
-		if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
-			continue;
-		if ((idx == PCI_ROM_RESOURCE) &&
-				(!(r->flags & IORESOURCE_ROM_ENABLE)))
-			continue;
-		if (!r->start && r->end) {
-			printk(KERN_ERR "PCI: Device %s not available "
-			       "because of resource collisions\n",
-			       pci_name(dev));
-			return -EINVAL;
-		}
-		if (r->flags & IORESOURCE_IO)
-			cmd |= PCI_COMMAND_IO;
-		if (r->flags & IORESOURCE_MEM)
-			cmd |= PCI_COMMAND_MEMORY;
-	}
-	if (cmd != old_cmd) {
-		printk("PCI: Enabling device %s (%04x -> %04x)\n",
-		       pci_name(dev), old_cmd, cmd);
-		pci_write_config_word(dev, PCI_COMMAND, cmd);
-	}
-	return 0;
+	return pci_enable_resources(dev, mask);
 }
 
 /*
@@ -295,7 +268,7 @@ void __init pcibios_update_irq(struct pci_dev *dev, int irq)
 	pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
 }
 
-char * __devinit pcibios_setup(char *str)
+char * __devinit __weak pcibios_setup(char *str)
 {
 	return str;
 }

arch/sh/drivers/pci/pcie-sh7786.h

@@ -55,8 +55,11 @@
 #define		BITS_ERRRCV	(0)		/* 0 ERRRCV 0 */
 #define		MASK_ERRRCV	(1<<BITS_ERRRCV)
 
+/*	PCIEENBLR	 */
+#define	SH4A_PCIEENBLR		(0x000008)	/* R/W - 0x0000 0001 32 */
+
 /*	PCIEECR		*/
-#define	SH4A_PCIEECR		(0x000008)	/* R/W - 0x0000 0000 32 */
+#define	SH4A_PCIEECR		(0x00000C)	/* R/W - 0x0000 0000 32 */
 #define		BITS_ENBL	(0)	/* 0 ENBL 0 R/W */
 #define		MASK_ENBL	(1<<BITS_ENBL)
 
@@ -113,6 +116,27 @@
 #define		BITS_MDATA	(0)
 #define		MASK_MDATA	(0xffffffff<<BITS_MDATA)
 
+/*	PCIEUNLOCKCR	*/
+#define	SH4A_PCIEUNLOCKCR	(0x000048)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEIDR		*/
+#define	SH4A_PCIEIDR		(0x000060)	/* R/W - 0x0101 1101 32 */
+
+/*	PCIEDBGCTLR	*/
+#define	SH4A_PCIEDBGCTLR	(0x000100)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIEINTXR	*/
+#define	SH4A_PCIEINTXR		(0x004000)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIERMSGR	*/
+#define	SH4A_PCIERMSGR		(0x004010)	/* R/W - 0x0000 0000 32 */
+
+/*	PCIERSTR	*/
+#define SH4A_PCIERSTR(x)	(0x008000 + ((x) * 0x4)) /* R/W - 0x0000 0000 32 */
+
+/*	PCIESRSTR	 */
+#define SH4A_PCIESRSTR		(0x008040)	/* R/W - 0x0000 0000 32 */
+
 /*	PCIEPHYCTLR	*/
 #define	SH4A_PCIEPHYCTLR	(0x010000)	/* R/W - 0x0000 0000 32 */
 #define		BITS_CKE	(0)
@@ -121,6 +145,9 @@
 /*	PCIERMSGIER	*/
 #define	SH4A_PCIERMSGIER	(0x004040)	/* R/W - 0x0000 0000 32 */
 
+/*	PCIEPHYCTLR	*/
+#define SH4A_PCIEPHYCTLR	(0x010000)	/* R/W - 0x0000 0000 32 */
+
 /*	PCIEPHYADRR	*/
 #define	SH4A_PCIEPHYADRR	(0x010004)	/* R/W - 0x0000 0000 32 */
 #define		BITS_ACK	(24)			// Rev1.171
@@ -152,7 +179,7 @@
 #define		MASK_CFINT	(1<<BITS_CFINT)
 
 /*	PCIETSTR	*/
-#define	SH4A_PCIETSTR		(0x020004)	/* R/W R/W 0x0000 0000 32  */
+#define	SH4A_PCIETSTR		(0x020004)	/* R 0x0000 0000 32  */
 
 /*	PCIEINTR	*/
 #define	SH4A_PCIEINTR		(0x020008)	/* R/W R/W 0x0000 0000 32  */
@@ -236,6 +263,9 @@
 #define		BITS_INTPM			(8)
 #define		MASK_INTPM			(1<<BITS_INTPM)
 
+/*	PCIEEH0R	*/
+#define SH4A_PCIEEHR(x)		(0x020010 + ((x) * 0x4)) /* R - 0x0000 0000 32 */
+
 /*	PCIEAIR	 */
 #define	SH4A_PCIEAIR		(SH4A_PCIE_BASE + 0x020010)	/* R/W R/W 0xxxxx xxxx 32 */
 
@@ -244,6 +274,25 @@
 
 /*	 PCIEERRFR	 */								// Rev1.18
 #define	SH4A_PCIEERRFR		(0x020020)		/* R/W R/W 0xxxxx xxxx 32 */	// Rev1.18
+
+/*	PCIEERRFER	*/
+#define SH4A_PCIEERRFER		(0x020024)		/* R/W R/W 0x0000 0000 32 */
+
+/*	PCIEERRFR2	*/
+#define SH4A_PCIEERRFR2		(0x020028)		/* R/W R/W 0x0000 0000 32 */
+
+/*	PCIEMSIR	*/
+#define SH4A_PCIEMSIR		(0x020040)		/* R/W - 0x0000 0000 32 */
+
+/*	PCIEMSIFR	*/
+#define SH4A_PCIEMSIFR		(0x020044)		/* R/W R/W 0x0000 0000 32 */
+
+/*	PCIEPWRCTLR	*/
+#define SH4A_PCIEPWRCTLR	(0x020100)		/* R/W - 0x0000 0000 32 */
+
+/*	PCIEPCCTLR	*/
+#define SH4A_PCIEPCCTLR		(0x020180)		/* R/W - 0x0000 0000 32 */
+
 											// Rev1.18
 /*	PCIELAR0	*/
 #define	SH4A_PCIELAR0		(0x020200)	/* R/W R/W 0x0000 0000 32 */
@@ -352,6 +401,7 @@
 #define	SH4A_PCIEDMCCR0		(0x021120)	/* R/W R/W 0x0000 0000 32 */
 #define	SH4A_PCIEDMCC2R0	(0x021124)	/* R/W R/W 0x0000 0000 - */
 #define	SH4A_PCIEDMCCCR0	(0x021128)	/* R/W R/W 0x0000 0000 32 */
+#define SH4A_PCIEDMCHSR0	(0x02112C)	/* R/W - 0x0000 0000 32 */
 #define	SH4A_PCIEDMSAR1		(0x021140)	/* R/W R/W 0x0000 0000 32 */
 #define	SH4A_PCIEDMSAHR1	(0x021144)	/* R/W R/W 0x0000 0000 32 */
 #define	SH4A_PCIEDMDAR1		(0x021148)	/* R/W R/W 0x0000 0000 32 */
@@ -363,6 +413,7 @@
 #define	SH4A_PCIEDMCCR1		(0x021160)	/* R/W R/W 0x0000 0000 32 */
 #define	SH4A_PCIEDMCC2R1	(0x021164)	/* R/W R/W 0x0000 0000 - */
 #define	SH4A_PCIEDMCCCR1	(0x021168)	/* R/W R/W 0x0000 0000 32 */
+#define SH4A_PCIEDMCHSR1	(0x02116C)	/* R/W - 0x0000 0000 32 */
 #define	SH4A_PCIEDMSAR2		(0x021180)	/* R/W R/W 0x0000 0000 32 */
 #define	SH4A_PCIEDMSAHR2	(0x021184)	/* R/W R/W 0x0000 0000 32 */
 #define	SH4A_PCIEDMDAR2		(0x021188)	/* R/W R/W 0x0000 0000 32 */
@@ -385,6 +436,7 @@
 #define	SH4A_PCIEDMCCR3		(0x0211E0)	/* R/W R/W 0x0000 0000 32 */
 #define	SH4A_PCIEDMCC2R3	(0x0211E4)	/* R/W R/W 0x0000 0000 -  */
 #define	SH4A_PCIEDMCCCR3	(0x0211E8)	/* R/W R/W 0x0000 0000 32 */
+#define SH4A_PCIEDMCHSR3	(0x0211EC)	/* R/W R/W 0x0000 0000 32 */
 #define	SH4A_PCIEPCICONF0	(0x040000)	/* R R - 8/16/32 */
 #define	SH4A_PCIEPCICONF1	(0x040004)	/* R/W R/W 0x0008 0000 8/16/32 */
 #define	SH4A_PCIEPCICONF2	(0x040008)	/* R/W R/W 0xFF00 0000 8/16/32 */

arch/sh/include/asm/Kbuild

@@ -5,5 +5,7 @@ header-y += cpu-features.h
 header-y += hw_breakpoint.h
 header-y += posix_types_32.h
 header-y += posix_types_64.h
+header-y += ptrace_32.h
+header-y += ptrace_64.h
 header-y += unistd_32.h
 header-y += unistd_64.h

arch/sh/include/asm/elf.h

@@ -50,25 +50,14 @@
 #define	R_SH_GOTPC		167
 
 /* FDPIC relocs */
-#define R_SH_GOT20		70
-#define R_SH_GOTOFF20		71
-#define R_SH_GOTFUNCDESC	72
-#define R_SH_GOTFUNCDESC20	73
-#define R_SH_GOTOFFFUNCDESC	74
-#define R_SH_GOTOFFFUNCDESC20	75
-#define R_SH_FUNCDESC		76
-#define R_SH_FUNCDESC_VALUE	77
-
-#if 0 /* XXX - later .. */
-#define R_SH_GOT20		198
-#define R_SH_GOTOFF20		199
-#define R_SH_GOTFUNCDESC	200
-#define R_SH_GOTFUNCDESC20	201
-#define R_SH_GOTOFFFUNCDESC	202
-#define R_SH_GOTOFFFUNCDESC20	203
-#define R_SH_FUNCDESC		204
-#define R_SH_FUNCDESC_VALUE	205
-#endif
+#define R_SH_GOT20		201
+#define R_SH_GOTOFF20		202
+#define R_SH_GOTFUNCDESC	203
+#define R_SH_GOTFUNCDESC20	204
+#define R_SH_GOTOFFFUNCDESC	205
+#define R_SH_GOTOFFFUNCDESC20	206
+#define R_SH_FUNCDESC		207
+#define R_SH_FUNCDESC_VALUE	208
 
 /* SHmedia relocs */
 #define R_SH_IMM_LOW16		246

arch/sh/include/asm/fixmap.h

@@ -58,7 +58,7 @@ enum fixed_addresses {
 
 #ifdef CONFIG_HIGHMEM
 	FIX_KMAP_BEGIN,	/* reserved pte's for temporary kernel mappings */
-	FIX_KMAP_END = FIX_KMAP_BEGIN+(KM_TYPE_NR*NR_CPUS)-1,
+	FIX_KMAP_END = FIX_KMAP_BEGIN + (KM_TYPE_NR * NR_CPUS) - 1,
 #endif
 
 #ifdef CONFIG_IOREMAP_FIXED
@@ -69,7 +69,7 @@ enum fixed_addresses {
 	 */
 #define FIX_N_IOREMAPS	32
 	FIX_IOREMAP_BEGIN,
-	FIX_IOREMAP_END = FIX_IOREMAP_BEGIN + FIX_N_IOREMAPS,
+	FIX_IOREMAP_END = FIX_IOREMAP_BEGIN + FIX_N_IOREMAPS - 1,
 #endif
 
 	__end_of_fixed_addresses

arch/sh/include/asm/gpio.h

@@ -41,14 +41,12 @@ static inline int gpio_cansleep(unsigned gpio)
 
 static inline int gpio_to_irq(unsigned gpio)
 {
-	WARN_ON(1);
-	return -ENOSYS;
+	return __gpio_to_irq(gpio);
 }
 
 static inline int irq_to_gpio(unsigned int irq)
 {
-	WARN_ON(1);
-	return -EINVAL;
+	return -ENOSYS;
 }
 
 #endif /* CONFIG_GPIOLIB */

arch/sh/include/asm/irq.h

@@ -9,7 +9,7 @@
  * advised to cap this at the hard limit that they're interested in
  * through the machvec.
  */
-#define NR_IRQS			256
+#define NR_IRQS			512
 #define NR_IRQS_LEGACY		8	/* Legacy external IRQ0-7 */
 
 /*

arch/sh/include/asm/kprobes.h

@@ -16,7 +16,6 @@ typedef insn_size_t kprobe_opcode_t;
 	? (MAX_STACK_SIZE) \
 	: (((unsigned long)current_thread_info()) + THREAD_SIZE - (ADDR)))
 
-#define regs_return_value(_regs)		((_regs)->regs[0])
 #define flush_insn_slot(p)		do { } while (0)
 #define kretprobe_blacklist_size	0
 

arch/sh/include/asm/pci.h

@@ -37,6 +37,8 @@ struct pci_channel {
 };
 
 /* arch/sh/drivers/pci/pci.c */
+extern raw_spinlock_t pci_config_lock;
+
 extern int register_pci_controller(struct pci_channel *hose);
 extern void pcibios_report_status(unsigned int status_mask, int warn);
 

arch/sh/include/asm/processor_32.h

@@ -13,7 +13,6 @@
 #include <linux/linkage.h>
 #include <asm/page.h>
 #include <asm/types.h>
-#include <asm/ptrace.h>
 #include <asm/hw_breakpoint.h>
 
 /*
@@ -194,8 +193,6 @@ extern unsigned long get_wchan(struct task_struct *p);
 #define KSTK_EIP(tsk)  (task_pt_regs(tsk)->pc)
 #define KSTK_ESP(tsk)  (task_pt_regs(tsk)->regs[15])
 
-#define user_stack_pointer(_regs)	((_regs)->regs[15])
-
 #if defined(CONFIG_CPU_SH2A) || defined(CONFIG_CPU_SH4)
 #define PREFETCH_STRIDE		L1_CACHE_BYTES
 #define ARCH_HAS_PREFETCH

arch/sh/include/asm/processor_64.h

@@ -17,7 +17,6 @@
 #include <linux/compiler.h>
 #include <asm/page.h>
 #include <asm/types.h>
-#include <asm/ptrace.h>
 #include <cpu/registers.h>
 
 /*
@@ -231,7 +230,5 @@ extern unsigned long get_wchan(struct task_struct *p);
 #define KSTK_EIP(tsk)  ((tsk)->thread.pc)
 #define KSTK_ESP(tsk)  ((tsk)->thread.sp)
 
-#define user_stack_pointer(_regs)	((_regs)->regs[15])
-
 #endif	/* __ASSEMBLY__ */
 #endif /* __ASM_SH_PROCESSOR_64_H */

arch/sh/include/asm/ptrace.h

@@ -3,90 +3,7 @@
 
 /*
  * Copyright (C) 1999, 2000  Niibe Yutaka
- *
- */
-#if defined(__SH5__)
-struct pt_regs {
-	unsigned long long pc;
-	unsigned long long sr;
-	long long syscall_nr;
-	unsigned long long regs[63];
-	unsigned long long tregs[8];
-	unsigned long long pad[2];
-};
-#else
-/*
- * GCC defines register number like this:
- * -----------------------------
- *	 0 - 15 are integer registers
- *	17 - 22 are control/special registers
- *	24 - 39 fp registers
- *	40 - 47 xd registers
- *	48 -    fpscr register
- * -----------------------------
- *
- * We follows above, except:
- *	16 --- program counter (PC)
- *	22 --- syscall #
- *	23 --- floating point communication register
  */
-#define REG_REG0	 0
-#define REG_REG15	15
-
-#define REG_PC		16
-
-#define REG_PR		17
-#define REG_SR		18
-#define REG_GBR		19
-#define REG_MACH	20
-#define REG_MACL	21
-
-#define REG_SYSCALL	22
-
-#define REG_FPREG0	23
-#define REG_FPREG15	38
-#define REG_XFREG0	39
-#define REG_XFREG15	54
-
-#define REG_FPSCR	55
-#define REG_FPUL	56
-
-/*
- * This struct defines the way the registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_regs {
-	unsigned long regs[16];
-	unsigned long pc;
-	unsigned long pr;
-	unsigned long sr;
-	unsigned long gbr;
-	unsigned long mach;
-	unsigned long macl;
-	long tra;
-};
-
-/*
- * This struct defines the way the DSP registers are stored on the
- * kernel stack during a system call or other kernel entry.
- */
-struct pt_dspregs {
-	unsigned long	a1;
-	unsigned long	a0g;
-	unsigned long	a1g;
-	unsigned long	m0;
-	unsigned long	m1;
-	unsigned long	a0;
-	unsigned long	x0;
-	unsigned long	x1;
-	unsigned long	y0;
-	unsigned long	y1;
-	unsigned long	dsr;
-	unsigned long	rs;
-	unsigned long	re;
-	unsigned long	mod;
-};
-#endif
 
 #define PTRACE_GETREGS		12	/* General registers */
 #define PTRACE_SETREGS		13
@@ -107,22 +24,102 @@ struct pt_dspregs {
 #define PT_DATA_ADDR		248	/* &(struct user)->start_data */
 #define PT_TEXT_LEN		252
 
+#if defined(__SH5__) || defined(CONFIG_CPU_SH5)
+#include "ptrace_64.h"
+#else
+#include "ptrace_32.h"
+#endif
+
 #ifdef __KERNEL__
+
+#include <linux/stringify.h>
+#include <linux/stddef.h>
+#include <linux/thread_info.h>
 #include <asm/addrspace.h>
 #include <asm/page.h>
 #include <asm/system.h>
 
 #define user_mode(regs)			(((regs)->sr & 0x40000000)==0)
+#define user_stack_pointer(regs)	((unsigned long)(regs)->regs[15])
+#define kernel_stack_pointer(regs)	((unsigned long)(regs)->regs[15])
 #define instruction_pointer(regs)	((unsigned long)(regs)->pc)
 
 extern void show_regs(struct pt_regs *);
 
+#define arch_has_single_step()	(1)
+
 /*
- * These are defined as per linux/ptrace.h.
+ * kprobe-based event tracer support
  */
-struct task_struct;
+struct pt_regs_offset {
+	const char *name;
+	int offset;
+};
 
-#define arch_has_single_step()	(1)
+#define REG_OFFSET_NAME(r) {.name = #r, .offset = offsetof(struct pt_regs, r)}
+#define REGS_OFFSET_NAME(num)	\
+	{.name = __stringify(r##num), .offset = offsetof(struct pt_regs, regs[num])}
+#define TREGS_OFFSET_NAME(num)	\
+	{.name = __stringify(tr##num), .offset = offsetof(struct pt_regs, tregs[num])}
+#define REG_OFFSET_END {.name = NULL, .offset = 0}
+
+/* Query offset/name of register from its name/offset */
+extern int regs_query_register_offset(const char *name);
+extern const char *regs_query_register_name(unsigned int offset);
+
+extern const struct pt_regs_offset regoffset_table[];
+
+/**
+ * regs_get_register() - get register value from its offset
+ * @regs:	pt_regs from which register value is gotten.
+ * @offset:	offset number of the register.
+ *
+ * regs_get_register returns the value of a register. The @offset is the
+ * offset of the register in struct pt_regs address which specified by @regs.
+ * If @offset is bigger than MAX_REG_OFFSET, this returns 0.
+ */
+static inline unsigned long regs_get_register(struct pt_regs *regs,
+					      unsigned int offset)
+{
+	if (unlikely(offset > MAX_REG_OFFSET))
+		return 0;
+	return *(unsigned long *)((unsigned long)regs + offset);
+}
+
+/**
+ * regs_within_kernel_stack() - check the address in the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @addr:	address which is checked.
+ *
+ * regs_within_kernel_stack() checks @addr is within the kernel stack page(s).
+ * If @addr is within the kernel stack, it returns true. If not, returns false.
+ */
+static inline int regs_within_kernel_stack(struct pt_regs *regs,
+					   unsigned long addr)
+{
+	return ((addr & ~(THREAD_SIZE - 1))  ==
+		(kernel_stack_pointer(regs) & ~(THREAD_SIZE - 1)));
+}
+
+/**
+ * regs_get_kernel_stack_nth() - get Nth entry of the stack
+ * @regs:	pt_regs which contains kernel stack pointer.
+ * @n:		stack entry number.
+ *
+ * regs_get_kernel_stack_nth() returns @n th entry of the kernel stack which
+ * is specified by @regs. If the @n th entry is NOT in the kernel stack,
+ * this returns 0.
+ */
+static inline unsigned long regs_get_kernel_stack_nth(struct pt_regs *regs,
+						      unsigned int n)
+{
+	unsigned long *addr = (unsigned long *)kernel_stack_pointer(regs);
+	addr += n;
+	if (regs_within_kernel_stack(regs, (unsigned long)addr))
+		return *addr;
+	else
+		return 0;
+}
 
 struct perf_event;
 struct perf_sample_data;

arch/sh/include/asm/ptrace_32.h

+#ifndef __ASM_SH_PTRACE_32_H
+#define __ASM_SH_PTRACE_32_H
+
+/*
+ * GCC defines register number like this:
+ * -----------------------------
+ *	 0 - 15 are integer registers
+ *	17 - 22 are control/special registers
+ *	24 - 39 fp registers
+ *	40 - 47 xd registers
+ *	48 -    fpscr register
+ * -----------------------------
+ *
+ * We follows above, except:
+ *	16 --- program counter (PC)
+ *	22 --- syscall #
+ *	23 --- floating point communication register
+ */
+#define REG_REG0	 0
+#define REG_REG15	15
+
+#define REG_PC		16
+
+#define REG_PR		17
+#define REG_SR		18
+#define REG_GBR		19
+#define REG_MACH	20
+#define REG_MACL	21
+
+#define REG_SYSCALL	22
+
+#define REG_FPREG0	23
+#define REG_FPREG15	38
+#define REG_XFREG0	39
+#define REG_XFREG15	54
+
+#define REG_FPSCR	55
+#define REG_FPUL	56
+
+/*
+ * This struct defines the way the registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_regs {
+	unsigned long regs[16];
+	unsigned long pc;
+	unsigned long pr;
+	unsigned long sr;
+	unsigned long gbr;
+	unsigned long mach;
+	unsigned long macl;
+	long tra;
+};
+
+/*
+ * This struct defines the way the DSP registers are stored on the
+ * kernel stack during a system call or other kernel entry.
+ */
+struct pt_dspregs {
+	unsigned long	a1;
+	unsigned long	a0g;
+	unsigned long	a1g;
+	unsigned long	m0;
+	unsigned long	m1;
+	unsigned long	a0;
+	unsigned long	x0;
+	unsigned long	x1;
+	unsigned long	y0;
+	unsigned long	y1;
+	unsigned long	dsr;
+	unsigned long	rs;
+	unsigned long	re;
+	unsigned long	mod;
+};
+
+#ifdef __KERNEL__
+
+#define MAX_REG_OFFSET		offsetof(struct pt_regs, tra)
+#define regs_return_value(regs)	((regs)->regs[0])
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_PTRACE_32_H */

arch/sh/include/asm/ptrace_64.h

+#ifndef __ASM_SH_PTRACE_64_H
+#define __ASM_SH_PTRACE_64_H
+
+struct pt_regs {
+	unsigned long long pc;
+	unsigned long long sr;
+	long long syscall_nr;
+	unsigned long long regs[63];
+	unsigned long long tregs[8];
+	unsigned long long pad[2];
+};
+
+#ifdef __KERNEL__
+
+#define MAX_REG_OFFSET		offsetof(struct pt_regs, tregs[7])
+#define regs_return_value(regs)	((regs)->regs[3])
+
+#endif /* __KERNEL__ */
+
+#endif /* __ASM_SH_PTRACE_64_H */

arch/sh/include/asm/sizes.h

@@ -32,6 +32,7 @@
 #define SZ_512				0x00000200
 
 #define SZ_1K                           0x00000400
+#define SZ_2K                           0x00000800
 #define SZ_4K                           0x00001000
 #define SZ_8K                           0x00002000
 #define SZ_16K                          0x00004000

arch/sh/include/asm/sram.h

+#ifndef __ASM_SRAM_H
+#define __ASM_SRAM_H
+
+#ifdef CONFIG_HAVE_SRAM_POOL
+
+#include <linux/spinlock.h>
+#include <linux/genalloc.h>
+
+/* arch/sh/mm/sram.c */
+extern struct gen_pool *sram_pool;
+
+static inline unsigned long sram_alloc(size_t len)
+{
+	if (!sram_pool)
+		return 0UL;
+
+	return gen_pool_alloc(sram_pool, len);
+}
+
+static inline void sram_free(unsigned long addr, size_t len)
+{
+	return gen_pool_free(sram_pool, addr, len);
+}
+
+#else
+
+static inline unsigned long sram_alloc(size_t len)
+{
+	return 0;
+}
+
+static inline void sram_free(unsigned long addr, size_t len)
+{
+}
+
+#endif /* CONFIG_HAVE_SRAM_POOL */
+
+#endif /* __ASM_SRAM_H */

arch/sh/include/asm/system.h

@@ -140,8 +140,6 @@ extern unsigned int instruction_size(unsigned int insn);
 extern unsigned long cached_to_uncached;
 extern unsigned long uncached_size;
 
-extern struct dentry *sh_debugfs_root;
-
 void per_cpu_trap_init(void);
 void default_idle(void);
 void cpu_idle_wait(void);

arch/sh/include/asm/system_32.h

@@ -212,17 +212,16 @@ static inline reg_size_t register_align(void *val)
 }
 
 int handle_unaligned_access(insn_size_t instruction, struct pt_regs *regs,
-			    struct mem_access *ma, int);
+			    struct mem_access *ma, int, unsigned long address);
 
 static inline void trigger_address_error(void)
 {
-	if (__in_29bit_mode())
-		__asm__ __volatile__ (
-			"ldc %0, sr\n\t"
-			"mov.l @%1, %0"
-			:
-			: "r" (0x10000000), "r" (0x80000001)
-		);
+	__asm__ __volatile__ (
+		"ldc %0, sr\n\t"
+		"mov.l @%1, %0"
+		:
+		: "r" (0x10000000), "r" (0x80000001)
+	);
 }
 
 asmlinkage void do_address_error(struct pt_regs *regs,

arch/sh/include/asm/tlbflush.h

@@ -21,6 +21,8 @@ extern void local_flush_tlb_kernel_range(unsigned long start,
 					 unsigned long end);
 extern void local_flush_tlb_one(unsigned long asid, unsigned long page);
 
+extern void __flush_tlb_global(void);
+
 #ifdef CONFIG_SMP
 
 extern void flush_tlb_all(void);

arch/sh/include/asm/unistd_32.h

@@ -345,12 +345,33 @@
 #define __NR_pwritev		334
 #define __NR_rt_tgsigqueueinfo	335
 #define __NR_perf_event_open	336
+#define __NR_fanotify_init	337
+#define __NR_fanotify_mark	338
+#define __NR_prlimit64		339
 
-#define NR_syscalls 337
+/* Non-multiplexed socket family */
+#define __NR_socket		340
+#define __NR_bind		341
+#define __NR_connect		342
+#define __NR_listen		343
+#define __NR_accept		344
+#define __NR_getsockname	345
+#define __NR_getpeername	346
+#define __NR_socketpair		347
+#define __NR_send		348
+#define __NR_sendto		349
+#define __NR_recv		350
+#define __NR_recvfrom		351
+#define __NR_shutdown		352
+#define __NR_setsockopt		353
+#define __NR_getsockopt		354
+#define __NR_sendmsg		355
+#define __NR_recvmsg		356
+#define __NR_recvmmsg		357
 
-#ifdef __KERNEL__
+#define NR_syscalls 358
 
-#define __IGNORE_recvmmsg
+#ifdef __KERNEL__
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR

arch/sh/include/asm/unistd_64.h

@@ -387,10 +387,13 @@
 #define __NR_perf_event_open	364
 #define __NR_recvmmsg		365
 #define __NR_accept4		366
+#define __NR_fanotify_init	367
+#define __NR_fanotify_mark	368
+#define __NR_prlimit64		369
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 367
+#define NR_syscalls 370
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR

arch/sh/include/cpu-sh3/cpu/mmu_context.h

@@ -16,6 +16,7 @@
 #define MMU_TEA		0xFFFFFFFC	/* TLB Exception Address */
 
 #define MMUCR		0xFFFFFFE0	/* MMU Control Register */
+#define MMUCR_TI	(1 << 2)	/* TLB flush bit */
 
 #define MMU_TLB_ADDRESS_ARRAY	0xF2000000
 #define MMU_PAGE_ASSOC_BIT	0x80

arch/sh/include/cpu-sh4/cpu/freq.h

@@ -56,7 +56,9 @@
 #define FRQCR1			0xffc40004
 #define FRQMR1			0xffc40014
 #elif defined(CONFIG_CPU_SUBTYPE_SHX3)
-#define FRQCR			0xffc00014
+#define FRQCR0			0xffc00000
+#define FRQCR1			0xffc00004
+#define FRQMR1			0xffc00014
 #else
 #define FRQCR			0xffc00000
 #define FRQCR_PSTBY		0x0200

arch/sh/include/cpu-sh4/cpu/shx3.h

+#ifndef __CPU_SHX3_H
+#define __CPU_SHX3_H
+
+enum {
+	/* PA */
+	GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4,
+	GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0,
+
+	/* PB */
+	GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4,
+	GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0,
+
+	/* PC */
+	GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4,
+	GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0,
+
+	/* PD */
+	GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4,
+	GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0,
+
+	/* PE */
+	GPIO_PE7, GPIO_PE6, GPIO_PE5, GPIO_PE4,
+	GPIO_PE3, GPIO_PE2, GPIO_PE1, GPIO_PE0,
+
+	/* PF */
+	GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4,
+	GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0,
+
+	/* PG */
+	GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4,
+	GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0,
+
+	/* PH */
+	GPIO_PH5, GPIO_PH4,
+	GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0,
+
+	/* SCIF */
+	GPIO_FN_SCK3, GPIO_FN_TXD3, GPIO_FN_RXD3,
+	GPIO_FN_SCK2, GPIO_FN_TXD2, GPIO_FN_RXD2,
+	GPIO_FN_SCK1, GPIO_FN_TXD1, GPIO_FN_RXD1,
+	GPIO_FN_SCK0, GPIO_FN_TXD0, GPIO_FN_RXD0,
+
+	/* LBSC */
+	GPIO_FN_D31, GPIO_FN_D30, GPIO_FN_D29, GPIO_FN_D28,
+	GPIO_FN_D27, GPIO_FN_D26, GPIO_FN_D25, GPIO_FN_D24,
+	GPIO_FN_D23, GPIO_FN_D22, GPIO_FN_D21, GPIO_FN_D20,
+	GPIO_FN_D19, GPIO_FN_D18, GPIO_FN_D17, GPIO_FN_D16,
+	GPIO_FN_WE3, GPIO_FN_WE2, GPIO_FN_CS6, GPIO_FN_CS5,
+	GPIO_FN_CS4, GPIO_FN_CLKOUTENB, GPIO_FN_BREQ,
+	GPIO_FN_IOIS16, GPIO_FN_CE2B, GPIO_FN_CE2A, GPIO_FN_BACK,
+
+	/* DMAC */
+	GPIO_FN_DACK0, GPIO_FN_DREQ0, GPIO_FN_DRAK0,
+	GPIO_FN_DACK1, GPIO_FN_DREQ1, GPIO_FN_DRAK1,
+	GPIO_FN_DACK2, GPIO_FN_DREQ2, GPIO_FN_DRAK2,
+	GPIO_FN_DACK3, GPIO_FN_DREQ3, GPIO_FN_DRAK3,
+
+	/* INTC */
+	GPIO_FN_IRQ3, GPIO_FN_IRQ2, GPIO_FN_IRQ1, GPIO_FN_IRQ0,
+	GPIO_FN_IRL3, GPIO_FN_IRL2, GPIO_FN_IRL1, GPIO_FN_IRL0,
+	GPIO_FN_IRQOUT, GPIO_FN_STATUS1, GPIO_FN_STATUS0,
+};
+
+#endif /* __CPU_SHX3_H */

arch/sh/include/mach-common/mach/sh2007.h

+#ifndef __MACH_SH2007_H
+#define __MACH_SH2007_H
+
+#define CS5BCR		0xff802050
+#define CS5WCR		0xff802058
+#define CS5PCR		0xff802070
+
+#define BUS_SZ8		1
+#define BUS_SZ16	2
+#define BUS_SZ32	3
+
+#define PCMCIA_IODYN	1
+#define PCMCIA_ATA	0
+#define PCMCIA_IO8	2
+#define PCMCIA_IO16	3
+#define PCMCIA_COMM8	4
+#define PCMCIA_COMM16	5
+#define PCMCIA_ATTR8	6
+#define PCMCIA_ATTR16	7
+
+#define TYPE_SRAM	0
+#define TYPE_PCMCIA	4
+
+/* write-read/write-write delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWW5		0
+#define IWW6		3
+/* different area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRWD5		2
+#define IWRWD6		2
+/* same area, read-write delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRWS5		2
+#define IWRWS6		2
+/* different area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRRD5		2
+#define IWRRD6		2
+/* same area, read-read delay (0-7:0,1,2,3,4,5,6,7) */
+#define IWRRS5		0
+#define IWRRS6		2
+/* burst count (0-3:4,8,16,32) */
+#define BST5		0
+#define BST6		0
+/* bus size */
+#define SZ5		BUS_SZ16
+#define SZ6		BUS_SZ16
+/* RD hold for SRAM (0-1:0,1) */
+#define RDSPL5		0
+#define RDSPL6		0
+/* Burst pitch (0-7:0,1,2,3,4,5,6,7) */
+#define BW5		0
+#define BW6		0
+/* Multiplex (0-1:0,1) */
+#define MPX5		0
+#define MPX6		0
+/* device type */
+#define TYPE5		TYPE_PCMCIA
+#define TYPE6		TYPE_PCMCIA
+/* address setup before assert CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define ADS5		0
+#define ADS6		0
+/* address hold after negate CSn for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define ADH5		0
+#define ADH6		0
+/* CSn assert to RD assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define RDS5		0
+#define RDS6		0
+/* RD negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define RDH5		0
+#define RDH6		0
+/* CSn assert to WE assert delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define WTS5		0
+#define WTS6		0
+/* WE negate to CSn negate delay for SRAM (0-7:0,1,2,3,4,5,6,7) */
+#define WTH5		0
+#define WTH6		0
+/* BS hold (0-1:1,2) */
+#define BSH5		0
+#define BSH6		0
+/* wait cycle (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
+#define IW5		6	/* 60ns PIO mode 4 */
+#define IW6		15	/* 250ns */
+
+#define SAA5		PCMCIA_IODYN	/* IDE area b4000000-b5ffffff */
+#define SAB5		PCMCIA_IODYN	/* CF  area b6000000-b7ffffff */
+#define PCWA5		0	/* additional wait A (0-3:0,15,30,50) */
+#define PCWB5		0	/* additional wait B (0-3:0,15,30,50) */
+/* wait B (0-15:0,1,2,3,4,5,6,7,8,9,11,13,15,17,21,25) */
+#define PCIW5		12
+/* Address->OE/WE assert delay A (0-7:0,1,2,3,6,9,12,15) */
+#define TEDA5		2
+/* Address->OE/WE assert delay B (0-7:0,1,2,3,6,9,12,15) */
+#define TEDB5		4
+/* OE/WE negate->Address delay A (0-7:0,1,2,3,6,9,12,15) */
+#define TEHA5		2
+/* OE/WE negate->Address delay B (0-7:0,1,2,3,6,9,12,15) */
+#define TEHB5		3
+
+#define CS5BCR_D	((IWW5<<28)|(IWRWD5<<24)|(IWRWS5<<20)|		\
+			(IWRRD5<<16)|(IWRRS5<<12)|(BST5<<10)|		\
+			(SZ5<<8)|(RDSPL5<<7)|(BW5<<4)|(MPX5<<3)|TYPE5)
+#define CS5WCR_D	((ADS5<<28)|(ADH5<<24)|(RDS5<<20)|	\
+			(RDH5<<16)|(WTS5<<12)|(WTH5<<8)|(BSH5<<4)|IW5)
+#define CS5PCR_D	((SAA5<<28)|(SAB5<<24)|(PCWA5<<22)|		\
+			(PCWB5<<20)|(PCIW5<<16)|(TEDA5<<12)|		\
+			(TEDB5<<8)|(TEHA5<<4)|TEHB5)
+
+#define SMC0_BASE       0xb0800000      /* eth0 */
+#define SMC1_BASE       0xb0900000      /* eth1 */
+#define CF_BASE         0xb6100000      /* Compact Flash (I/O area) */
+#define IDE_BASE        0xb4000000      /* IDE */
+#define PC104_IO_BASE   0xb8000000
+#define PC104_MEM_BASE  0xba000000
+#define SMC_IO_SIZE     0x100
+
+#define CF_OFFSET       0x1f0
+#define IDE_OFFSET      0x170
+
+#endif /* __MACH_SH2007_H */

arch/sh/include/mach-sdk7786/mach/fpga.h

@@ -31,11 +31,35 @@
 #define EXTASR		0x110
 #define SPCAR		0x120
 #define INTMSR		0x130
+
 #define PCIECR		0x140
+#define  PCIECR_PCIEMUX1	BIT(15)
+#define  PCIECR_PCIEMUX0	BIT(14)
+#define  PCIECR_PRST4		BIT(12) /* slot 4 card present */
+#define  PCIECR_PRST3		BIT(11) /* slot 3 card present */
+#define  PCIECR_PRST2		BIT(10) /* slot 2 card present */
+#define  PCIECR_PRST1		BIT(9)  /* slot 1 card present */
+#define  PCIECR_CLKEN		BIT(4)	/* oscillator enable */
+
 #define FAER		0x150
 #define USRGPIR		0x160
+
 /* 0x170 reserved */
-#define LCLASR		0x180
+
+#define LCLASR			0x180
+#define  LCLASR_FRAMEN		BIT(15)
+
+#define  LCLASR_FPGA_SEL_SHIFT	12
+#define  LCLASR_NAND_SEL_SHIFT	8
+#define  LCLASR_NORB_SEL_SHIFT	4
+#define  LCLASR_NORA_SEL_SHIFT	0
+
+#define  LCLASR_AREA_MASK	0x7
+
+#define  LCLASR_FPGA_SEL_MASK	(LCLASR_AREA_MASK << LCLASR_FPGA_SEL_SHIFT)
+#define  LCLASR_NAND_SEL_MASK	(LCLASR_AREA_MASK << LCLASR_NAND_SEL_SHIFT)
+#define  LCLASR_NORB_SEL_MASK	(LCLASR_AREA_MASK << LCLASR_NORB_SEL_SHIFT)
+#define  LCLASR_NORA_SEL_MASK	(LCLASR_AREA_MASK << LCLASR_NORA_SEL_SHIFT)
 
 #define SBCR		0x190
 #define  SCBR_I2CMEN	BIT(0)	/* FPGA I2C master enable */

arch/sh/include/mach-x3proto/mach/hardware.h

+#ifndef __MACH_X3PROTO_HARDWARE_H
+#define __MACH_X3PROTO_HARDWARE_H
+
+struct gpio_chip;
+
+/* arch/sh/boards/mach-x3proto/gpio.c */
+int x3proto_gpio_setup(void);
+extern struct gpio_chip x3proto_gpio_chip;
+
+#define NR_BASEBOARD_GPIOS	16
+
+#endif /* __MACH_X3PROTO_HARDWARE_H */

arch/sh/kernel/Makefile

@@ -12,9 +12,9 @@ endif
 CFLAGS_REMOVE_return_address.o = -pg
 
 obj-y	:= clkdev.o debugtraps.o dma-nommu.o dumpstack.o 		\
-	   idle.o io.o irq.o						\
-	   irq_$(BITS).o machvec.o nmi_debug.o process.o		\
-	   process_$(BITS).o ptrace_$(BITS).o				\
+	   idle.o io.o irq.o irq_$(BITS).o kdebugfs.o			\
+	   machvec.o nmi_debug.o process.o				\
+	   process_$(BITS).o ptrace.o ptrace_$(BITS).o			\
 	   reboot.o return_address.o					\
 	   setup.o signal_$(BITS).o sys_sh.o sys_sh$(BITS).o		\
 	   syscalls_$(BITS).o time.o topology.o traps.o			\
@@ -44,4 +44,4 @@ obj-$(CONFIG_HAS_IOPORT)	+= io_generic.o
 obj-$(CONFIG_HAVE_HW_BREAKPOINT)		+= hw_breakpoint.o
 obj-$(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)	+= localtimer.o
 
-EXTRA_CFLAGS += -Werror
+ccflags-y := -Werror

arch/sh/kernel/clkdev.c

@@ -161,9 +161,11 @@ EXPORT_SYMBOL(clk_add_alias);
  */
 void clkdev_drop(struct clk_lookup *cl)
 {
+	struct clk_lookup_alloc *cla = container_of(cl, struct clk_lookup_alloc, cl);
+
 	mutex_lock(&clocks_mutex);
 	list_del(&cl->node);
 	mutex_unlock(&clocks_mutex);
-	kfree(cl);
+	kfree(cla);
 }
 EXPORT_SYMBOL(clkdev_drop);

arch/sh/kernel/cpu/sh4/probe.c

@@ -150,7 +150,7 @@ void __cpuinit cpu_probe(void)
 			boot_cpu_data.type = CPU_SH7724;
 			boot_cpu_data.flags |= CPU_HAS_L2_CACHE;
 			break;
-		case 0x50:
+		case 0x10:
 			boot_cpu_data.type = CPU_SH7757;
 			break;
 		}

arch/sh/kernel/cpu/sh4a/Makefile

@@ -8,13 +8,13 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7763)	+= setup-sh7763.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7770)	+= setup-sh7770.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= setup-sh7780.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7785)	+= setup-sh7785.o
-obj-$(CONFIG_CPU_SUBTYPE_SH7786)	+= setup-sh7786.o
+obj-$(CONFIG_CPU_SUBTYPE_SH7786)	+= setup-sh7786.o intc-shx3.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7343)	+= setup-sh7343.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7722)	+= setup-sh7722.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7723)	+= setup-sh7723.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7724)	+= setup-sh7724.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7366)	+= setup-sh7366.o
-obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o
+obj-$(CONFIG_CPU_SUBTYPE_SHX3)		+= setup-shx3.o intc-shx3.o
 
 # SMP setup
 smp-$(CONFIG_CPU_SHX3)			:= smp-shx3.o
@@ -40,6 +40,7 @@ pinmux-$(CONFIG_CPU_SUBTYPE_SH7724)	:= pinmux-sh7724.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7757)	:= pinmux-sh7757.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7785)	:= pinmux-sh7785.o
 pinmux-$(CONFIG_CPU_SUBTYPE_SH7786)	:= pinmux-sh7786.o
+pinmux-$(CONFIG_CPU_SUBTYPE_SHX3)	:= pinmux-shx3.o
 
 obj-y					+= $(clock-y)
 obj-$(CONFIG_SMP)			+= $(smp-y)

arch/sh/kernel/cpu/sh4a/clock-sh7757.c

@@ -3,7 +3,7 @@
  *
  * SH7757 support for the clock framework
  *
- *  Copyright (C) 2009  Renesas Solutions Corp.
+ *  Copyright (C) 2009-2010  Renesas Solutions Corp.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -16,124 +16,147 @@
 #include <asm/clock.h>
 #include <asm/freq.h>
 
-static int ifc_divisors[] = { 2, 1, 4, 1, 1, 8, 1, 1,
-			      16, 1, 1, 32, 1, 1, 1, 1 };
-static int sfc_divisors[] = { 2, 1, 4, 1, 1, 8, 1, 1,
-			      16, 1, 1, 32, 1, 1, 1, 1 };
-static int bfc_divisors[] = { 2, 1, 4, 1, 1, 8, 1, 1,
-			      16, 1, 1, 32, 1, 1, 1, 1 };
-static int p1fc_divisors[] = { 2, 1, 4, 1, 1, 8, 1, 1,
-			       16, 1, 1, 32, 1, 1, 1, 1 };
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 48000000,
+};
 
-static void master_clk_init(struct clk *clk)
+static unsigned long pll_recalc(struct clk *clk)
 {
-	clk->rate = CONFIG_SH_PCLK_FREQ * 16;
-}
+	int multiplier;
 
-static struct clk_ops sh7757_master_clk_ops = {
-	.init		= master_clk_init,
-};
+	multiplier = test_mode_pin(MODE_PIN0) ? 24 : 16;
 
-static void module_clk_recalc(struct clk *clk)
-{
-	int idx = __raw_readl(FRQCR) & 0x0000000f;
-	clk->rate = clk->parent->rate / p1fc_divisors[idx];
+	return clk->parent->rate * multiplier;
 }
 
-static struct clk_ops sh7757_module_clk_ops = {
-	.recalc		= module_clk_recalc,
+static struct clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
 };
 
-static void bus_clk_recalc(struct clk *clk)
-{
-	int idx = (__raw_readl(FRQCR) >> 8) & 0x0000000f;
-	clk->rate = clk->parent->rate / bfc_divisors[idx];
-}
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
 
-static struct clk_ops sh7757_bus_clk_ops = {
-	.recalc		= bus_clk_recalc,
+static struct clk *clks[] = {
+	&extal_clk,
+	&pll_clk,
 };
 
-static void cpu_clk_recalc(struct clk *clk)
-{
-	int idx = (__raw_readl(FRQCR) >> 20) & 0x0000000f;
-	clk->rate = clk->parent->rate / ifc_divisors[idx];
-}
+static unsigned int div2[] = { 1, 1, 2, 1, 1, 4, 1, 6,
+			       1, 1, 1, 16, 1, 24, 1, 1 };
 
-static struct clk_ops sh7757_cpu_clk_ops = {
-	.recalc		= cpu_clk_recalc,
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
 };
 
-static struct clk_ops *sh7757_clk_ops[] = {
-	&sh7757_master_clk_ops,
-	&sh7757_module_clk_ops,
-	&sh7757_bus_clk_ops,
-	&sh7757_cpu_clk_ops,
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
-	if (idx < ARRAY_SIZE(sh7757_clk_ops))
-		*ops = sh7757_clk_ops[idx];
-}
+enum { DIV4_I, DIV4_SH, DIV4_P, DIV4_NR };
 
-static void shyway_clk_recalc(struct clk *clk)
-{
-	int idx = (__raw_readl(FRQCR) >> 12) & 0x0000000f;
-	clk->rate = clk->parent->rate / sfc_divisors[idx];
-}
-
-static struct clk_ops sh7757_shyway_clk_ops = {
-	.recalc		= shyway_clk_recalc,
-};
+#define DIV4(_bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, FRQCR, _bit, _mask, _flags)
 
-static struct clk sh7757_shyway_clk = {
-	.flags		= CLK_ENABLE_ON_INIT,
-	.ops		= &sh7757_shyway_clk_ops,
+struct clk div4_clks[DIV4_NR] = {
+	/*
+	 * P clock is always enable, because some P clock modules is used
+	 * by Host PC.
+	 */
+	[DIV4_P] = DIV4(0, 0x2800, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(12, 0x00a0, CLK_ENABLE_ON_INIT),
+	[DIV4_I] = DIV4(20, 0x0004, CLK_ENABLE_ON_INIT),
 };
 
-/*
- * Additional sh7757-specific on-chip clocks that aren't already part of the
- * clock framework
- */
-static struct clk *sh7757_onchip_clocks[] = {
-	&sh7757_shyway_clk,
+#define MSTPCR0		0xffc80030
+#define MSTPCR1		0xffc80034
+
+enum { MSTP004, MSTP000, MSTP114, MSTP113, MSTP112,
+       MSTP111, MSTP110, MSTP103, MSTP102,
+       MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	/* MSTPCR0 */
+	[MSTP004] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 4, 0),
+	[MSTP000] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 0, 0),
+
+	/* MSTPCR1 */
+	[MSTP114] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 14, 0),
+	[MSTP113] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 13, 0),
+	[MSTP112] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 12, 0),
+	[MSTP111] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 11, 0),
+	[MSTP110] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 10, 0),
+	[MSTP103] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 3, 0),
+	[MSTP102] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1, 2, 0),
 };
 
 #define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
 
 static struct clk_lookup lookups[] = {
 	/* main clocks */
-	CLKDEV_CON_ID("shyway_clk", &sh7757_shyway_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+	/* MSTP32 clocks */
+	CLKDEV_CON_ID("sdhi0", &mstp_clks[MSTP004]),
+	CLKDEV_CON_ID("riic", &mstp_clks[MSTP000]),
+	{
+		/* TMU0 */
+		.dev_id		= "sh_tmu.0",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP113],
+	}, {
+		/* TMU1 */
+		.dev_id		= "sh_tmu.1",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP114],
+	},
+	{
+		/* SCIF4 (But, ID is 2) */
+		.dev_id		= "sh-sci.2",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP112],
+	}, {
+		/* SCIF3 */
+		.dev_id		= "sh-sci.1",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP111],
+	}, {
+		/* SCIF2 */
+		.dev_id		= "sh-sci.0",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP110],
+	},
+	CLKDEV_CON_ID("usb0", &mstp_clks[MSTP102]),
 };
 
-static int __init sh7757_clk_init(void)
+int __init arch_clk_init(void)
 {
-	struct clk *clk = clk_get(NULL, "master_clk");
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(sh7757_onchip_clocks); i++) {
-		struct clk *clkp = sh7757_onchip_clocks[i];
+	int i, ret = 0;
 
-		clkp->parent = clk;
-		clk_register(clkp);
-		clk_enable(clkp);
-	}
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		ret |= clk_register(clks[i]);
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
-	/*
-	 * Now that we have the rest of the clocks registered, we need to
-	 * force the parent clock to propagate so that these clocks will
-	 * automatically figure out their rate. We cheat by handing the
-	 * parent clock its current rate and forcing child propagation.
-	 */
-	clk_set_rate(clk, clk_get_rate(clk));
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
+					   &div4_table);
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
-	clk_put(clk);
-
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
-	return 0;
+	return ret;
 }
 
-arch_initcall(sh7757_clk_init);
-

arch/sh/kernel/cpu/sh4a/clock-shx3.c

@@ -5,7 +5,7 @@
  *
  *  Copyright (C) 2006-2007  Renesas Technology Corp.
  *  Copyright (C) 2006-2007  Renesas Solutions Corp.
- *  Copyright (C) 2006-2007  Paul Mundt
+ *  Copyright (C) 2006-2010  Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -18,120 +18,179 @@
 #include <asm/clock.h>
 #include <asm/freq.h>
 
-static int ifc_divisors[] = { 1, 2, 4 ,6 };
-static int bfc_divisors[] = { 1, 1, 1, 1, 1, 12, 16, 18, 24, 32, 36, 48 };
-static int pfc_divisors[] = { 1, 1, 1, 1, 1, 1, 1, 18, 24, 32, 36, 48 };
-static int cfc_divisors[] = { 1, 1, 4, 6 };
-
-#define IFC_POS		28
-#define IFC_MSK		0x0003
-#define BFC_MSK		0x000f
-#define PFC_MSK		0x000f
-#define CFC_MSK		0x0003
-#define BFC_POS		16
-#define PFC_POS		0
-#define CFC_POS		20
-
-static void master_clk_init(struct clk *clk)
-{
-	clk->rate *= pfc_divisors[(__raw_readl(FRQCR) >> PFC_POS) & PFC_MSK];
-}
-
-static struct clk_ops shx3_master_clk_ops = {
-	.init		= master_clk_init,
+/*
+ * Default rate for the root input clock, reset this with clk_set_rate()
+ * from the platform code.
+ */
+static struct clk extal_clk = {
+	.rate		= 16666666,
 };
 
-static unsigned long module_clk_recalc(struct clk *clk)
+static unsigned long pll_recalc(struct clk *clk)
 {
-	int idx = ((__raw_readl(FRQCR) >> PFC_POS) & PFC_MSK);
-	return clk->parent->rate / pfc_divisors[idx];
+	/* PLL1 has a fixed x72 multiplier.  */
+	return clk->parent->rate * 72;
 }
 
-static struct clk_ops shx3_module_clk_ops = {
-	.recalc		= module_clk_recalc,
+static struct clk_ops pll_clk_ops = {
+	.recalc		= pll_recalc,
 };
 
-static unsigned long bus_clk_recalc(struct clk *clk)
-{
-	int idx = ((__raw_readl(FRQCR) >> BFC_POS) & BFC_MSK);
-	return clk->parent->rate / bfc_divisors[idx];
-}
+static struct clk pll_clk = {
+	.ops		= &pll_clk_ops,
+	.parent		= &extal_clk,
+	.flags		= CLK_ENABLE_ON_INIT,
+};
 
-static struct clk_ops shx3_bus_clk_ops = {
-	.recalc		= bus_clk_recalc,
+static struct clk *clks[] = {
+	&extal_clk,
+	&pll_clk,
 };
 
-static unsigned long cpu_clk_recalc(struct clk *clk)
-{
-	int idx = ((__raw_readl(FRQCR) >> IFC_POS) & IFC_MSK);
-	return clk->parent->rate / ifc_divisors[idx];
-}
+static unsigned int div2[] = { 1, 2, 4, 6, 8, 12, 16, 18,
+			       24, 32, 36, 48 };
 
-static struct clk_ops shx3_cpu_clk_ops = {
-	.recalc		= cpu_clk_recalc,
+static struct clk_div_mult_table div4_div_mult_table = {
+	.divisors = div2,
+	.nr_divisors = ARRAY_SIZE(div2),
 };
 
-static struct clk_ops *shx3_clk_ops[] = {
-	&shx3_master_clk_ops,
-	&shx3_module_clk_ops,
-	&shx3_bus_clk_ops,
-	&shx3_cpu_clk_ops,
+static struct clk_div4_table div4_table = {
+	.div_mult_table = &div4_div_mult_table,
 };
 
-void __init arch_init_clk_ops(struct clk_ops **ops, int idx)
-{
-	if (idx < ARRAY_SIZE(shx3_clk_ops))
-		*ops = shx3_clk_ops[idx];
-}
+enum { DIV4_I, DIV4_SH, DIV4_B, DIV4_DDR, DIV4_SHA, DIV4_P, DIV4_NR };
 
-static unsigned long shyway_clk_recalc(struct clk *clk)
-{
-	int idx = ((__raw_readl(FRQCR) >> CFC_POS) & CFC_MSK);
-	return clk->parent->rate / cfc_divisors[idx];
-}
+#define DIV4(_bit, _mask, _flags) \
+  SH_CLK_DIV4(&pll_clk, FRQMR1, _bit, _mask, _flags)
 
-static struct clk_ops shx3_shyway_clk_ops = {
-	.recalc		= shyway_clk_recalc,
+struct clk div4_clks[DIV4_NR] = {
+	[DIV4_P] = DIV4(0, 0x0f80, 0),
+	[DIV4_SHA] = DIV4(4, 0x0ff0, 0),
+	[DIV4_DDR] = DIV4(12, 0x000c, CLK_ENABLE_ON_INIT),
+	[DIV4_B] = DIV4(16, 0x0fe0, CLK_ENABLE_ON_INIT),
+	[DIV4_SH] = DIV4(20, 0x000c, CLK_ENABLE_ON_INIT),
+	[DIV4_I] = DIV4(28, 0x000e, CLK_ENABLE_ON_INIT),
 };
 
-static struct clk shx3_shyway_clk = {
-	.flags		= CLK_ENABLE_ON_INIT,
-	.ops		= &shx3_shyway_clk_ops,
-};
-
-/*
- * Additional SHx3-specific on-chip clocks that aren't already part of the
- * clock framework
- */
-static struct clk *shx3_onchip_clocks[] = {
-	&shx3_shyway_clk,
+#define MSTPCR0		0xffc00030
+#define MSTPCR1		0xffc00034
+
+enum { MSTP027, MSTP026, MSTP025, MSTP024,
+       MSTP009, MSTP008, MSTP003, MSTP002,
+       MSTP001, MSTP000, MSTP119, MSTP105,
+       MSTP104, MSTP_NR };
+
+static struct clk mstp_clks[MSTP_NR] = {
+	/* MSTPCR0 */
+	[MSTP027] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 27, 0),
+	[MSTP026] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 26, 0),
+	[MSTP025] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 25, 0),
+	[MSTP024] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 24, 0),
+	[MSTP009] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 9, 0),
+	[MSTP008] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 8, 0),
+	[MSTP003] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 3, 0),
+	[MSTP002] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 2, 0),
+	[MSTP001] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 1, 0),
+	[MSTP000] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 0, 0),
+
+	/* MSTPCR1 */
+	[MSTP119] = SH_CLK_MSTP32(NULL, MSTPCR1, 19, 0),
+	[MSTP105] = SH_CLK_MSTP32(NULL, MSTPCR1, 5, 0),
+	[MSTP104] = SH_CLK_MSTP32(NULL, MSTPCR1, 4, 0),
 };
 
 #define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk }
 
 static struct clk_lookup lookups[] = {
 	/* main clocks */
-	CLKDEV_CON_ID("shyway_clk", &shx3_shyway_clk),
+	CLKDEV_CON_ID("extal", &extal_clk),
+	CLKDEV_CON_ID("pll_clk", &pll_clk),
+
+	/* DIV4 clocks */
+	CLKDEV_CON_ID("peripheral_clk", &div4_clks[DIV4_P]),
+	CLKDEV_CON_ID("shywaya_clk", &div4_clks[DIV4_SHA]),
+	CLKDEV_CON_ID("ddr_clk", &div4_clks[DIV4_DDR]),
+	CLKDEV_CON_ID("bus_clk", &div4_clks[DIV4_B]),
+	CLKDEV_CON_ID("shyway_clk", &div4_clks[DIV4_SH]),
+	CLKDEV_CON_ID("cpu_clk", &div4_clks[DIV4_I]),
+
+	/* MSTP32 clocks */
+	{
+		/* SCIF3 */
+		.dev_id		= "sh-sci.3",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP027],
+	}, {
+		/* SCIF2 */
+		.dev_id		= "sh-sci.2",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP026],
+	}, {
+		/* SCIF1 */
+		.dev_id		= "sh-sci.1",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP025],
+	}, {
+		/* SCIF0 */
+		.dev_id		= "sh-sci.0",
+		.con_id		= "sci_fck",
+		.clk		= &mstp_clks[MSTP024],
+	},
+	CLKDEV_CON_ID("h8ex_fck", &mstp_clks[MSTP003]),
+	CLKDEV_CON_ID("csm_fck", &mstp_clks[MSTP002]),
+	CLKDEV_CON_ID("fe1_fck", &mstp_clks[MSTP001]),
+	CLKDEV_CON_ID("fe0_fck", &mstp_clks[MSTP000]),
+	{
+		/* TMU0 */
+		.dev_id		= "sh_tmu.0",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP008],
+	}, {
+		/* TMU1 */
+		.dev_id		= "sh_tmu.1",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP008],
+	}, {
+		/* TMU2 */
+		.dev_id		= "sh_tmu.2",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP008],
+	}, {
+		/* TMU3 */
+		.dev_id		= "sh_tmu.3",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP009],
+	}, {
+		/* TMU4 */
+		.dev_id		= "sh_tmu.4",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP009],
+	}, {
+		/* TMU5 */
+		.dev_id		= "sh_tmu.5",
+		.con_id		= "tmu_fck",
+		.clk		= &mstp_clks[MSTP009],
+	},
+	CLKDEV_CON_ID("hudi_fck", &mstp_clks[MSTP119]),
+	CLKDEV_CON_ID("dmac_11_6_fck", &mstp_clks[MSTP105]),
+	CLKDEV_CON_ID("dmac_5_0_fck", &mstp_clks[MSTP104]),
 };
 
 int __init arch_clk_init(void)
 {
-	struct clk *clk;
 	int i, ret = 0;
 
-	cpg_clk_init();
-
-	clk = clk_get(NULL, "master_clk");
-	for (i = 0; i < ARRAY_SIZE(shx3_onchip_clocks); i++) {
-		struct clk *clkp = shx3_onchip_clocks[i];
-
-		clkp->parent = clk;
-		ret |= clk_register(clkp);
-	}
-
-	clk_put(clk);
+	for (i = 0; i < ARRAY_SIZE(clks); i++)
+		ret |= clk_register(clks[i]);
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
 
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
+	if (!ret)
+		ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks),
+					   &div4_table);
+	if (!ret)
+		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
 	return ret;
 }

arch/sh/kernel/cpu/sh4a/intc-shx3.c

+/*
+ * Shared support for SH-X3 interrupt controllers.
+ *
+ *  Copyright (C) 2009 - 2010  Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/init.h>
+
+#define INTACK		0xfe4100b8
+#define INTACKCLR	0xfe4100bc
+#define INTC_USERIMASK	0xfe411000
+
+#ifdef CONFIG_INTC_BALANCING
+unsigned int irq_lookup(unsigned int irq)
+{
+	return __raw_readl(INTACK) & 1 ? irq : NO_IRQ_IGNORE;
+}
+
+void irq_finish(unsigned int irq)
+{
+	__raw_writel(irq2evt(irq), INTACKCLR);
+}
+#endif
+
+static int __init shx3_irq_setup(void)
+{
+	return register_intc_userimask(INTC_USERIMASK);
+}
+arch_initcall(shx3_irq_setup);