Commit 1e3cd4ce authored by Alan Stern's avatar Alan Stern Committed by Greg Kroah-Hartman

[PATCH] USB device init: implement the Windows scheme

This patch implements the Windows scheme for USB device initialization.
It also incorporates the change recently posted by David to scrub the
endpoint state following a SET-ADDRESS.  Other noteworthy changes:

	There are two new module parameters to control whether the
	old scheme or the new one is used first and whether the other
	scheme is tried if the first one fails.  Default settings are
	to use the new scheme only.

	hub_set_address() returns 0 immediately if the device is already
	in the USB_STATE_ADDRESS state.

	On the first attempt to read the device descriptor the code
	uses a short 1-second timeout.  This ought to help prevent
	full-speed devices with an 8- or 16-byte maxpacket from
	slowing the procedure down by NAKing the unexpectedly early
	status stage of the transfer.

	For debugging, the ep0 maxpacket value is printed.  It might
	be a good idea to validate it rather than just believing the
	device -- although I haven't heard of any device providing
	an incorrect value other than 0.
Signed-off-by: default avatarAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <greg@kroah.com>
parent 38a0a73e
......@@ -56,6 +56,31 @@ static int blinkenlights = 0;
module_param (blinkenlights, bool, S_IRUGO);
MODULE_PARM_DESC (blinkenlights, "true to cycle leds on hubs");
/*
* As of 2.6.10 we introduce a new USB device initialization scheme which
* closely resembles the way Windows works. Hopefully it will be compatible
* with a wider range of devices than the old scheme. However some previously
* working devices may start giving rise to "device not accepting address"
* errors; if that happens the user can try the old scheme by adjusting the
* following module parameters.
*
* For maximum flexibility there are two boolean parameters to control the
* hub driver's behavior. On the first initialization attempt, if the
* "old_scheme_first" parameter is set then the old scheme will be used,
* otherwise the new scheme is used. If that fails and "use_both_schemes"
* is set, then the driver will make another attempt, using the other scheme.
*/
static int old_scheme_first = 0;
module_param(old_scheme_first, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(old_scheme_first,
"start with the old device initialization scheme");
static int use_both_schemes = 0;
module_param(use_both_schemes, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(use_both_schemes,
"try the other device initialization scheme if the "
"first one fails");
#ifdef DEBUG
static inline char *portspeed (int portstatus)
......@@ -1273,7 +1298,8 @@ static int hub_port_status(struct usb_device *hdev, int port,
#define PORT_RESET_TRIES 5
#define SET_ADDRESS_TRIES 2
#define GET_DESCRIPTOR_TRIES 2
#define SET_CONFIG_TRIES 2
#define SET_CONFIG_TRIES (2 * (use_both_schemes + 1))
#define USE_NEW_SCHEME(i) ((i) / 2 == old_scheme_first)
#define HUB_ROOT_RESET_TIME 50 /* times are in msec */
#define HUB_SHORT_RESET_TIME 10
......@@ -1991,20 +2017,30 @@ static int hub_port_debounce(struct usb_device *hdev, int port)
return portstatus;
}
#define usb_sndaddr0pipe() (PIPE_CONTROL << 30)
#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN)
static int hub_set_address(struct usb_device *udev)
{
int retval;
if (udev->devnum == 0)
return -EINVAL;
if (udev->state != USB_STATE_DEFAULT &&
udev->state != USB_STATE_ADDRESS)
if (udev->state == USB_STATE_ADDRESS)
return 0;
if (udev->state != USB_STATE_DEFAULT)
return -EINVAL;
retval = usb_control_msg(udev, (PIPE_CONTROL << 30) /* Address 0 */,
retval = usb_control_msg(udev, usb_sndaddr0pipe(),
USB_REQ_SET_ADDRESS, 0, udev->devnum, 0,
NULL, 0, HZ * USB_CTRL_SET_TIMEOUT);
if (retval == 0)
if (retval == 0) {
int m = udev->epmaxpacketin[0];
usb_set_device_state(udev, USB_STATE_ADDRESS);
usb_disable_endpoint(udev, 0 + USB_DIR_IN);
usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
udev->epmaxpacketin[0] = udev->epmaxpacketout[0] = m;
}
return retval;
}
......@@ -2018,7 +2054,8 @@ static int hub_set_address(struct usb_device *udev)
* pointers, it's not necessary to lock the device.
*/
static int
hub_port_init (struct usb_device *hdev, struct usb_device *udev, int port)
hub_port_init (struct usb_device *hdev, struct usb_device *udev, int port,
int retry_counter)
{
static DECLARE_MUTEX(usb_address0_sem);
......@@ -2057,6 +2094,7 @@ hub_port_init (struct usb_device *hdev, struct usb_device *udev, int port)
dev_dbg(&udev->dev, "device reset changed speed!\n");
goto fail;
}
oldspeed = udev->speed;
/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
* it's fixed size except for full speed devices.
......@@ -2066,22 +2104,22 @@ hub_port_init (struct usb_device *hdev, struct usb_device *udev, int port)
i = 64;
break;
case USB_SPEED_FULL: /* 8, 16, 32, or 64 */
/* to determine the ep0 maxpacket size, read the first 8
* bytes from the device descriptor to get bMaxPacketSize0;
* then correct our initial (small) guess.
/* to determine the ep0 maxpacket size, try to read
* the device descriptor to get bMaxPacketSize0 and
* then correct our initial guess.
*/
// FALLTHROUGH
i = 64;
break;
case USB_SPEED_LOW: /* fixed at 8 */
i = 8;
break;
default:
goto fail;
}
udev->epmaxpacketin [0] = i;
udev->epmaxpacketout[0] = i;
udev->epmaxpacketin[0] = udev->epmaxpacketout[0] = i;
dev_info (&udev->dev,
"%s %s speed USB device using address %d\n",
"%s %s speed USB device using %s and address %d\n",
(udev->config) ? "reset" : "new",
({ char *speed; switch (udev->speed) {
case USB_SPEED_LOW: speed = "low"; break;
......@@ -2089,6 +2127,7 @@ hub_port_init (struct usb_device *hdev, struct usb_device *udev, int port)
case USB_SPEED_HIGH: speed = "high"; break;
default: speed = "?"; break;
}; speed;}),
udev->bus->controller->driver->name,
udev->devnum);
/* Set up TT records, if needed */
......@@ -2109,11 +2148,59 @@ hub_port_init (struct usb_device *hdev, struct usb_device *udev, int port)
* this area, and this is how Linux has done it for ages.
* Change it cautiously.
*
* NOTE: Windows gets the descriptor first, seemingly to help
* work around device bugs like "can't use addresses with bit 3
* set in certain configurations". Yes, really.
* NOTE: If USE_NEW_SCHEME() is true we will start by issuing
* a 64-byte GET_DESCRIPTOR request. This is what Windows does,
* so it may help with some non-standards-compliant devices.
* Otherwise we start with SET_ADDRESS and then try to read the
* first 8 bytes of the device descriptor to get the ep0 maxpacket
* value.
*/
for (i = 0; i < GET_DESCRIPTOR_TRIES; ++i) {
for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
if (USE_NEW_SCHEME(retry_counter)) {
struct usb_device_descriptor *buf;
#define GET_DESCRIPTOR_BUFSIZE 64
buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO);
if (!buf) {
retval = -ENOMEM;
continue;
}
buf->bMaxPacketSize0 = 0;
/* Use a short timeout the first time through,
* so that recalcitrant full-speed devices with
* 8- or 16-byte ep0-maxpackets won't slow things
* down tremendously by NAKing the unexpectedly
* early status stage.
*/
j = usb_control_msg(udev, usb_rcvaddr0pipe(),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
USB_DT_DEVICE << 8, 0,
buf, GET_DESCRIPTOR_BUFSIZE,
(i ? HZ * USB_CTRL_GET_TIMEOUT : HZ));
udev->descriptor.bMaxPacketSize0 =
buf->bMaxPacketSize0;
kfree(buf);
retval = hub_port_reset(hdev, port, udev, delay);
if (retval < 0) /* error or disconnect */
goto fail;
if (oldspeed != udev->speed) {
dev_dbg(&udev->dev,
"device reset changed speed!\n");
retval = -ENODEV;
goto fail;
}
if (udev->descriptor.bMaxPacketSize0 == 0) {
dev_err(&udev->dev, "device descriptor "
"read/%s, error %d\n",
"64", j);
retval = -EMSGSIZE;
continue;
}
#undef GET_DESCRIPTOR_BUFSIZE
}
for (j = 0; j < SET_ADDRESS_TRIES; ++j) {
retval = hub_set_address(udev);
if (retval >= 0)
......@@ -2132,25 +2219,31 @@ hub_port_init (struct usb_device *hdev, struct usb_device *udev, int port)
* - read ep0 maxpacket even for high and low speed,
*/
msleep(10);
if (USE_NEW_SCHEME(retry_counter))
break;
retval = usb_get_device_descriptor(udev, 8);
if (retval >= 8)
if (retval < 8) {
dev_err(&udev->dev, "device descriptor "
"read/%s, error %d\n",
"8", retval);
if (retval >= 0)
retval = -EMSGSIZE;
} else {
retval = 0;
break;
msleep(100);
}
}
if (retval != 8) {
dev_err(&udev->dev, "device descriptor read/%s, error %d\n",
"8", retval);
if (retval >= 0)
retval = -EMSGSIZE;
if (retval)
goto fail;
}
if (udev->speed == USB_SPEED_FULL
&& (udev->epmaxpacketin [0]
!= udev->descriptor.bMaxPacketSize0)) {
/* Should we verify that the value is valid? */
i = udev->descriptor.bMaxPacketSize0;
dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i);
if (udev->epmaxpacketin[0] != i) {
usb_disable_endpoint(udev, 0 + USB_DIR_IN);
usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
udev->epmaxpacketin [0] = udev->descriptor.bMaxPacketSize0;
udev->epmaxpacketout[0] = udev->descriptor.bMaxPacketSize0;
udev->epmaxpacketin[0] = udev->epmaxpacketout[0] = i;
}
retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
......@@ -2320,7 +2413,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port,
}
/* reset and get descriptor */
status = hub_port_init(hdev, udev, port);
status = hub_port_init(hdev, udev, port, i);
if (status < 0)
goto loop;
......@@ -2740,7 +2833,7 @@ int usb_reset_device(struct usb_device *udev)
{
struct usb_device *parent = udev->parent;
struct usb_device_descriptor descriptor = udev->descriptor;
int i, ret, port = -1;
int i, ret = 0, port = -1;
int udev_is_a_hub = 0;
if (udev->state == USB_STATE_NOTATTACHED ||
......@@ -2776,12 +2869,16 @@ int usb_reset_device(struct usb_device *udev)
hub_pre_reset(udev);
}
/* ep0 maxpacket size may change; let the HCD know about it.
* Other endpoints will be handled by re-enumeration. */
usb_disable_endpoint(udev, 0);
usb_disable_endpoint(udev, 0 + USB_DIR_IN);
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
ret = hub_port_init(parent, udev, port);
/* ep0 maxpacket size may change; let the HCD know about it.
* Other endpoints will be handled by re-enumeration. */
usb_disable_endpoint(udev, 0 + USB_DIR_IN);
usb_disable_endpoint(udev, 0 + USB_DIR_OUT);
ret = hub_port_init(parent, udev, port, i);
if (ret >= 0)
break;
}
if (ret < 0)
goto re_enumerate;
......
......@@ -264,11 +264,10 @@ int usb_submit_urb(struct urb *urb, int mem_flags)
max = usb_maxpacket (dev, pipe, is_out);
if (max <= 0) {
dbg ("%s: bogus endpoint %d-%s on usb-%s-%s (bad maxpacket %d)",
__FUNCTION__,
usb_pipeendpoint (pipe), is_out ? "OUT" : "IN",
dev->bus->bus_name, dev->devpath,
max);
dev_dbg(&dev->dev,
"bogus endpoint ep%d%s in %s (bad maxpacket %d)",
usb_pipeendpoint (pipe), is_out ? "out" : "in",
__FUNCTION__, max);
return -EMSGSIZE;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment