iio: accel: Add support for the h3lis331dl accelerometer

This commit adds support for STMicroelectronics h3lis331dl high-g
accelerometer. The datasheet for this device can be found here:

http://www.st.com/web/en/resource/technical/document/
datasheet/DM00053090.pdf
Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Reviewed-by: Denis Ciocca <denis.ciocca@st.com>
Acked-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Documentation/devicetree/bindings/iio/st-sensors.txt

@@ -37,6 +37,7 @@ Accelerometers:
 - st,lsm330-accel
 - st,lsm303agr-accel
 - st,lis2dh12-accel
+- st,h3lis331dl-accel
 
 Gyroscopes:
 - st,l3g4200d-gyro

drivers/iio/accel/Kconfig

@@ -64,7 +64,7 @@ config IIO_ST_ACCEL_3AXIS
 	help
 	  Say yes here to build support for STMicroelectronics accelerometers:
 	  LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
-	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12.
+	  LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL.
 
 	  This driver can also be built as a module. If so, these modules
 	  will be created:

drivers/iio/accel/st_accel.h

@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/iio/common/st_sensors.h>
 
+#define H3LIS331DL_DRIVER_NAME		"h3lis331dl_accel"
 #define LIS3LV02DL_ACCEL_DEV_NAME	"lis3lv02dl_accel"
 #define LSM303DLHC_ACCEL_DEV_NAME	"lsm303dlhc_accel"
 #define LIS3DH_ACCEL_DEV_NAME		"lis3dh"

drivers/iio/accel/st_accel_core.c

@@ -39,6 +39,9 @@
 #define ST_ACCEL_FS_AVL_6G			6
 #define ST_ACCEL_FS_AVL_8G			8
 #define ST_ACCEL_FS_AVL_16G			16
+#define ST_ACCEL_FS_AVL_100G			100
+#define ST_ACCEL_FS_AVL_200G			200
+#define ST_ACCEL_FS_AVL_400G			400
 
 /* CUSTOM VALUES FOR SENSOR 1 */
 #define ST_ACCEL_1_WAI_EXP			0x33
@@ -181,6 +184,33 @@
 #define ST_ACCEL_5_IG1_EN_MASK			0x08
 #define ST_ACCEL_5_MULTIREAD_BIT		false
 
+/* CUSTOM VALUES FOR SENSOR 6 */
+#define ST_ACCEL_6_WAI_EXP			0x32
+#define ST_ACCEL_6_ODR_ADDR			0x20
+#define ST_ACCEL_6_ODR_MASK			0x18
+#define ST_ACCEL_6_ODR_AVL_50HZ_VAL		0x00
+#define ST_ACCEL_6_ODR_AVL_100HZ_VAL		0x01
+#define ST_ACCEL_6_ODR_AVL_400HZ_VAL		0x02
+#define ST_ACCEL_6_ODR_AVL_1000HZ_VAL		0x03
+#define ST_ACCEL_6_PW_ADDR			0x20
+#define ST_ACCEL_6_PW_MASK			0x20
+#define ST_ACCEL_6_FS_ADDR			0x23
+#define ST_ACCEL_6_FS_MASK			0x30
+#define ST_ACCEL_6_FS_AVL_100_VAL		0x00
+#define ST_ACCEL_6_FS_AVL_200_VAL		0x01
+#define ST_ACCEL_6_FS_AVL_400_VAL		0x03
+#define ST_ACCEL_6_FS_AVL_100_GAIN		IIO_G_TO_M_S_2(49000)
+#define ST_ACCEL_6_FS_AVL_200_GAIN		IIO_G_TO_M_S_2(98000)
+#define ST_ACCEL_6_FS_AVL_400_GAIN		IIO_G_TO_M_S_2(195000)
+#define ST_ACCEL_6_BDU_ADDR			0x23
+#define ST_ACCEL_6_BDU_MASK			0x80
+#define ST_ACCEL_6_DRDY_IRQ_ADDR		0x22
+#define ST_ACCEL_6_DRDY_IRQ_INT1_MASK		0x02
+#define ST_ACCEL_6_DRDY_IRQ_INT2_MASK		0x10
+#define ST_ACCEL_6_IHL_IRQ_ADDR			0x22
+#define ST_ACCEL_6_IHL_IRQ_MASK			0x80
+#define ST_ACCEL_6_MULTIREAD_BIT		true
+
 static const struct iio_chan_spec st_accel_8bit_channels[] = {
 	ST_SENSORS_LSM_CHANNELS(IIO_ACCEL,
 			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
@@ -557,6 +587,68 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 		.multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT,
 		.bootime = 2, /* guess */
 	},
+	{
+		.wai = ST_ACCEL_6_WAI_EXP,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = H3LIS331DL_DRIVER_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
+		.odr = {
+			.addr = ST_ACCEL_6_ODR_ADDR,
+			.mask = ST_ACCEL_6_ODR_MASK,
+			.odr_avl = {
+				{ 50, ST_ACCEL_6_ODR_AVL_50HZ_VAL },
+				{ 100, ST_ACCEL_6_ODR_AVL_100HZ_VAL, },
+				{ 400, ST_ACCEL_6_ODR_AVL_400HZ_VAL, },
+				{ 1000, ST_ACCEL_6_ODR_AVL_1000HZ_VAL, },
+			},
+		},
+		.pw = {
+			.addr = ST_ACCEL_6_PW_ADDR,
+			.mask = ST_ACCEL_6_PW_MASK,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = ST_ACCEL_6_FS_ADDR,
+			.mask = ST_ACCEL_6_FS_MASK,
+			.fs_avl = {
+				[0] = {
+					.num = ST_ACCEL_FS_AVL_100G,
+					.value = ST_ACCEL_6_FS_AVL_100_VAL,
+					.gain = ST_ACCEL_6_FS_AVL_100_GAIN,
+				},
+				[1] = {
+					.num = ST_ACCEL_FS_AVL_200G,
+					.value = ST_ACCEL_6_FS_AVL_200_VAL,
+					.gain = ST_ACCEL_6_FS_AVL_200_GAIN,
+				},
+				[2] = {
+					.num = ST_ACCEL_FS_AVL_400G,
+					.value = ST_ACCEL_6_FS_AVL_400_VAL,
+					.gain = ST_ACCEL_6_FS_AVL_400_GAIN,
+				},
+			},
+		},
+		.bdu = {
+			.addr = ST_ACCEL_6_BDU_ADDR,
+			.mask = ST_ACCEL_6_BDU_MASK,
+		},
+		.drdy_irq = {
+			.addr = ST_ACCEL_6_DRDY_IRQ_ADDR,
+			.mask_int1 = ST_ACCEL_6_DRDY_IRQ_INT1_MASK,
+			.mask_int2 = ST_ACCEL_6_DRDY_IRQ_INT2_MASK,
+			.addr_ihl = ST_ACCEL_6_IHL_IRQ_ADDR,
+			.mask_ihl = ST_ACCEL_6_IHL_IRQ_MASK,
+		},
+		.multi_read_bit = ST_ACCEL_6_MULTIREAD_BIT,
+		.bootime = 2,
+	},
 };
 
 static int st_accel_read_raw(struct iio_dev *indio_dev,

drivers/iio/accel/st_accel_i2c.c

@@ -76,6 +76,10 @@ static const struct of_device_id st_accel_of_match[] = {
 		.compatible = "st,lis2dh12-accel",
 		.data = LIS2DH12_ACCEL_DEV_NAME,
 	},
+	{
+		.compatible = "st,h3lis331dl-accel",
+		.data = H3LIS331DL_DRIVER_NAME,
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, st_accel_of_match);