Commit 1e881592 authored by Lennert Buytenhek's avatar Lennert Buytenhek

mv643xx_eth: detect alternate TX BW control register location

Some SoCs have the TX bandwidth control registers in a slightly
different place.  This patch detects that case at run time, and
re-directs accesses to those registers to the proper place at
run time if needed.
Signed-off-by: default avatarLennert Buytenhek <buytenh@marvell.com>
Acked-by: default avatarDale Farnsworth <dale@farnsworth.org>
parent 773fc3ee
......@@ -108,6 +108,10 @@ static char mv643xx_eth_driver_version[] = "1.0";
#define INT_MASK(p) (0x0468 + ((p) << 10))
#define INT_MASK_EXT(p) (0x046c + ((p) << 10))
#define TX_FIFO_URGENT_THRESHOLD(p) (0x0474 + ((p) << 10))
#define TXQ_FIX_PRIO_CONF_MOVED(p) (0x04dc + ((p) << 10))
#define TX_BW_RATE_MOVED(p) (0x04e0 + ((p) << 10))
#define TX_BW_MTU_MOVED(p) (0x04e8 + ((p) << 10))
#define TX_BW_BURST_MOVED(p) (0x04ec + ((p) << 10))
#define RXQ_CURRENT_DESC_PTR(p, q) (0x060c + ((p) << 10) + ((q) << 4))
#define RXQ_COMMAND(p) (0x0680 + ((p) << 10))
#define TXQ_CURRENT_DESC_PTR(p, q) (0x06c0 + ((p) << 10) + ((q) << 2))
......@@ -250,6 +254,7 @@ struct mv643xx_eth_shared_private {
*/
unsigned int t_clk;
int extended_rx_coal_limit;
int tx_bw_control_moved;
};
......@@ -831,9 +836,15 @@ static void tx_set_rate(struct mv643xx_eth_private *mp, int rate, int burst)
if (bucket_size > 65535)
bucket_size = 65535;
wrl(mp, TX_BW_RATE(mp->port_num), token_rate);
wrl(mp, TX_BW_MTU(mp->port_num), mtu);
wrl(mp, TX_BW_BURST(mp->port_num), bucket_size);
if (mp->shared->tx_bw_control_moved) {
wrl(mp, TX_BW_RATE_MOVED(mp->port_num), token_rate);
wrl(mp, TX_BW_MTU_MOVED(mp->port_num), mtu);
wrl(mp, TX_BW_BURST_MOVED(mp->port_num), bucket_size);
} else {
wrl(mp, TX_BW_RATE(mp->port_num), token_rate);
wrl(mp, TX_BW_MTU(mp->port_num), mtu);
wrl(mp, TX_BW_BURST(mp->port_num), bucket_size);
}
}
static void txq_set_rate(struct tx_queue *txq, int rate, int burst)
......@@ -864,7 +875,10 @@ static void txq_set_fixed_prio_mode(struct tx_queue *txq)
/*
* Turn on fixed priority mode.
*/
off = TXQ_FIX_PRIO_CONF(mp->port_num);
if (mp->shared->tx_bw_control_moved)
off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num);
else
off = TXQ_FIX_PRIO_CONF(mp->port_num);
val = rdl(mp, off);
val |= 1 << txq->index;
......@@ -880,7 +894,10 @@ static void txq_set_wrr(struct tx_queue *txq, int weight)
/*
* Turn off fixed priority mode.
*/
off = TXQ_FIX_PRIO_CONF(mp->port_num);
if (mp->shared->tx_bw_control_moved)
off = TXQ_FIX_PRIO_CONF_MOVED(mp->port_num);
else
off = TXQ_FIX_PRIO_CONF(mp->port_num);
val = rdl(mp, off);
val &= ~(1 << txq->index);
......@@ -2108,6 +2125,16 @@ static void infer_hw_params(struct mv643xx_eth_shared_private *msp)
msp->extended_rx_coal_limit = 1;
else
msp->extended_rx_coal_limit = 0;
/*
* Check whether the TX rate control registers are in the
* old or the new place.
*/
writel(1, msp->base + TX_BW_MTU_MOVED(0));
if (readl(msp->base + TX_BW_MTU_MOVED(0)) & 1)
msp->tx_bw_control_moved = 1;
else
msp->tx_bw_control_moved = 0;
}
static int mv643xx_eth_shared_probe(struct platform_device *pdev)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment