powerpc/83xx: add NAND support for the MPC8360E-RDK boards

The StMicro NAND chip (512Mbit, 64MB) is connected to the local bus,
the first local bus' user-programmable machine is configured by the
firmware to work with NAND chips.

QE GPIO pin is used to poll the NAND's Ready-Not-Busy signal.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

arch/powerpc/boot/dts/mpc836x_rdk.dts

@@ -387,6 +387,18 @@ flash@0,0 {
 			device-width = <1>;
 		};
 
+		upm@1,0 {
+			compatible = "fsl,upm-nand";
+			reg = <1 0 1>;
+			fsl,upm-addr-offset = <16>;
+			fsl,upm-cmd-offset = <8>;
+			gpios = <&qe_pio_e 18 0>;
+
+			flash {
+				compatible = "stm,nand512-a";
+			};
+		};
+
 		display@2,0 {
 			device_type = "display";
 			compatible = "fujitsu,MB86277", "fujitsu,mint";