Merge remote-tracking branches 'asoc/topic/wm8960', 'asoc/topic/wm8978' and...

Merge remote-tracking branches 'asoc/topic/wm8960', 'asoc/topic/wm8978' and 'asoc/topic/zte-tdm' into asoc-next

Documentation/devicetree/bindings/sound/zte,tdm.txt

+ZTE TDM DAI driver
+
+Required properties:
+
+- compatible : should be one of the following.
+       * zte,zx296718-tdm
+- reg : physical base address of the controller and length of memory mapped
+    region.
+- clocks : Pairs of phandle and specifier referencing the controller's clocks.
+- clock-names: "wclk" for the wclk.
+               "pclk" for the pclk.
+-#clock-cells: should be 1.
+- zte,tdm-dma-sysctrl : Reference to the sysctrl controller controlling
+    the dma. includes:
+	phandle of sysctrl.
+	register offset in sysctrl for control dma.
+	mask of the register that be written to sysctrl.
+
+Example:
+
+	tdm: tdm@1487000 {
+		compatible = "zte,zx296718-tdm";
+		reg = <0x01487000 0x1000>;
+		clocks = <&audiocrm AUDIO_TDM_WCLK>, <&audiocrm AUDIO_TDM_PCLK>;
+		clock-names = "wclk", "pclk";
+		#clock-cells = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&tdm_global_pin>;
+		zte,tdm-dma-sysctrl = <&sysctrl 0x10c 4>;
+	};

sound/soc/codecs/wm8960.c

@@ -604,12 +604,150 @@ static const int bclk_divs[] = {
 	120, 160, 220, 240, 320, 320, 320
 };
 
+/**
+ * wm8960_configure_sysclk - checks if there is a sysclk frequency available
+ *	The sysclk must be chosen such that:
+ *		- sysclk     = MCLK / sysclk_divs
+ *		- lrclk      = sysclk / dac_divs
+ *		- 10 * bclk  = sysclk / bclk_divs
+ *
+ *	If we cannot find an exact match for (sysclk, lrclk, bclk)
+ *	triplet, we relax the bclk such that bclk is chosen as the
+ *	closest available frequency greater than expected bclk.
+ *
+ * @wm8960_priv: wm8960 codec private data
+ * @mclk: MCLK used to derive sysclk
+ * @sysclk_idx: sysclk_divs index for found sysclk
+ * @dac_idx: dac_divs index for found lrclk
+ * @bclk_idx: bclk_divs index for found bclk
+ *
+ * Returns:
+ *  -1, in case no sysclk frequency available found
+ * >=0, in case we could derive bclk and lrclk from sysclk using
+ *      (@sysclk_idx, @dac_idx, @bclk_idx) dividers
+ */
+static
+int wm8960_configure_sysclk(struct wm8960_priv *wm8960, int mclk,
+			    int *sysclk_idx, int *dac_idx, int *bclk_idx)
+{
+	int sysclk, bclk, lrclk;
+	int i, j, k;
+	int diff, closest = mclk;
+
+	/* marker for no match */
+	*bclk_idx = -1;
+
+	bclk = wm8960->bclk;
+	lrclk = wm8960->lrclk;
+
+	/* check if the sysclk frequency is available. */
+	for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
+		if (sysclk_divs[i] == -1)
+			continue;
+		sysclk = mclk / sysclk_divs[i];
+		for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
+			if (sysclk != dac_divs[j] * lrclk)
+				continue;
+			for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) {
+				diff = sysclk - bclk * bclk_divs[k] / 10;
+				if (diff == 0) {
+					*sysclk_idx = i;
+					*dac_idx = j;
+					*bclk_idx = k;
+					break;
+				}
+				if (diff > 0 && closest > diff) {
+					*sysclk_idx = i;
+					*dac_idx = j;
+					*bclk_idx = k;
+					closest = diff;
+				}
+			}
+			if (k != ARRAY_SIZE(bclk_divs))
+				break;
+		}
+		if (j != ARRAY_SIZE(dac_divs))
+			break;
+	}
+	return *bclk_idx;
+}
+
+/**
+ * wm8960_configure_pll - checks if there is a PLL out frequency available
+ *	The PLL out frequency must be chosen such that:
+ *		- sysclk      = lrclk * dac_divs
+ *		- freq_out    = sysclk * sysclk_divs
+ *		- 10 * sysclk = bclk * bclk_divs
+ *
+ * 	If we cannot find an exact match for (sysclk, lrclk, bclk)
+ * 	triplet, we relax the bclk such that bclk is chosen as the
+ * 	closest available frequency greater than expected bclk.
+ *
+ * @codec: codec structure
+ * @freq_in: input frequency used to derive freq out via PLL
+ * @sysclk_idx: sysclk_divs index for found sysclk
+ * @dac_idx: dac_divs index for found lrclk
+ * @bclk_idx: bclk_divs index for found bclk
+ *
+ * Returns:
+ * < 0, in case no PLL frequency out available was found
+ * >=0, in case we could derive bclk, lrclk, sysclk from PLL out using
+ *      (@sysclk_idx, @dac_idx, @bclk_idx) dividers
+ */
+static
+int wm8960_configure_pll(struct snd_soc_codec *codec, int freq_in,
+			 int *sysclk_idx, int *dac_idx, int *bclk_idx)
+{
+	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
+	int sysclk, bclk, lrclk, freq_out;
+	int diff, closest, best_freq_out;
+	int i, j, k;
+
+	bclk = wm8960->bclk;
+	lrclk = wm8960->lrclk;
+	closest = freq_in;
+
+	best_freq_out = -EINVAL;
+	*sysclk_idx = *dac_idx = *bclk_idx = -1;
+
+	for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
+		if (sysclk_divs[i] == -1)
+			continue;
+		for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
+			sysclk = lrclk * dac_divs[j];
+			freq_out = sysclk * sysclk_divs[i];
+
+			for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) {
+				if (!is_pll_freq_available(freq_in, freq_out))
+					continue;
+
+				diff = sysclk - bclk * bclk_divs[k] / 10;
+				if (diff == 0) {
+					*sysclk_idx = i;
+					*dac_idx = j;
+					*bclk_idx = k;
+					return freq_out;
+				}
+				if (diff > 0 && closest > diff) {
+					*sysclk_idx = i;
+					*dac_idx = j;
+					*bclk_idx = k;
+					closest = diff;
+					best_freq_out = freq_out;
+				}
+			}
+		}
+	}
+
+	return best_freq_out;
+}
 static int wm8960_configure_clocking(struct snd_soc_codec *codec)
 {
 	struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
-	int sysclk, bclk, lrclk, freq_out, freq_in;
+	int freq_out, freq_in;
 	u16 iface1 = snd_soc_read(codec, WM8960_IFACE1);
 	int i, j, k;
+	int ret;
 
 	if (!(iface1 & (1<<6))) {
 		dev_dbg(codec->dev,
@@ -623,8 +761,6 @@ static int wm8960_configure_clocking(struct snd_soc_codec *codec)
 	}
 
 	freq_in = wm8960->freq_in;
-	bclk = wm8960->bclk;
-	lrclk = wm8960->lrclk;
 	/*
 	 * If it's sysclk auto mode, check if the MCLK can provide sysclk or
 	 * not. If MCLK can provide sysclk, using MCLK to provide sysclk
@@ -643,60 +779,21 @@ static int wm8960_configure_clocking(struct snd_soc_codec *codec)
 	}
 
 	if (wm8960->clk_id != WM8960_SYSCLK_PLL) {
-		/* check if the sysclk frequency is available. */
-		for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
-			if (sysclk_divs[i] == -1)
-				continue;
-			sysclk = freq_out / sysclk_divs[i];
-			for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
-				if (sysclk != dac_divs[j] * lrclk)
-					continue;
-				for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k)
-					if (sysclk == bclk * bclk_divs[k] / 10)
-						break;
-				if (k != ARRAY_SIZE(bclk_divs))
-					break;
-			}
-			if (j != ARRAY_SIZE(dac_divs))
-				break;
-		}
-
-		if (i != ARRAY_SIZE(sysclk_divs)) {
+		ret = wm8960_configure_sysclk(wm8960, freq_out, &i, &j, &k);
+		if (ret >= 0) {
 			goto configure_clock;
 		} else if (wm8960->clk_id != WM8960_SYSCLK_AUTO) {
 			dev_err(codec->dev, "failed to configure clock\n");
 			return -EINVAL;
 		}
 	}
-	/* get a available pll out frequency and set pll */
-	for (i = 0; i < ARRAY_SIZE(sysclk_divs); ++i) {
-		if (sysclk_divs[i] == -1)
-			continue;
-		for (j = 0; j < ARRAY_SIZE(dac_divs); ++j) {
-			sysclk = lrclk * dac_divs[j];
-			freq_out = sysclk * sysclk_divs[i];
 
-			for (k = 0; k < ARRAY_SIZE(bclk_divs); ++k) {
-				if (sysclk == bclk * bclk_divs[k] / 10 &&
-				    is_pll_freq_available(freq_in, freq_out)) {
-					wm8960_set_pll(codec,
-						       freq_in, freq_out);
-					break;
-				} else {
-					continue;
-				}
-			}
-			if (k != ARRAY_SIZE(bclk_divs))
-				break;
-		}
-		if (j != ARRAY_SIZE(dac_divs))
-			break;
-	}
-
-	if (i == ARRAY_SIZE(sysclk_divs)) {
-		dev_err(codec->dev, "failed to configure clock\n");
-		return -EINVAL;
+	freq_out = wm8960_configure_pll(codec, freq_in, &i, &j, &k);
+	if (freq_out < 0) {
+		dev_err(codec->dev, "failed to configure clock via PLL\n");
+		return freq_out;
 	}
+	wm8960_set_pll(codec, freq_in, freq_out);
 
 configure_clock:
 	/* configure sysclk clock */

sound/soc/codecs/wm8978.c

@@ -1071,9 +1071,16 @@ static const struct i2c_device_id wm8978_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, wm8978_i2c_id);
 
+static const struct of_device_id wm8978_of_match[] = {
+	{ .compatible = "wlf,wm8978", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, wm8978_of_match);
+
 static struct i2c_driver wm8978_i2c_driver = {
 	.driver = {
 		.name = "wm8978",
+		.of_match_table = wm8978_of_match,
 	},
 	.probe =    wm8978_i2c_probe,
 	.remove =   wm8978_i2c_remove,

sound/soc/zte/Kconfig

@@ -15,3 +15,11 @@ config ZX_I2S
 	help
 	  Say Y or M if you want to add support for codecs attached to the
 	  ZTE ZX I2S interface
+
+config ZX_TDM
+        tristate "ZTE ZX TDM Driver Support"
+        depends on COMMON_CLK
+        select SND_SOC_GENERIC_DMAENGINE_PCM
+        help
+          Say Y or M if you want to add support for codecs attached to the
+          ZTE ZX TDM interface

sound/soc/zte/Makefile

 obj-$(CONFIG_ZX_SPDIF)	+= zx-spdif.o
 obj-$(CONFIG_ZX_I2S)	+= zx-i2s.o
+obj-$(CONFIG_ZX_TDM)	+= zx-tdm.o