Commit 247537b9 authored by Adrian Bunk's avatar Adrian Bunk Committed by Sam Ravnborg

kconfig: syntax cleanup - drop support for "depends/requires/def_boolean"

Remove the following redundant and never or rarely used kconfig syntax:

- "def_boolean" (same as "def_bool")
- "requires" (same as "depends on")
- "depends" (same as "depends on")

This patch contains the code changes and Kconfig updates.
The shipped files are in next patch to let actual codechange stand out.
Signed-off-by: default avatarAdrian Bunk <bunk@kernel.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dmitry Torokhov <dtor@mail.ru>
Cc: "John W. Linville" <linville@tuxdriver.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarSam Ravnborg <sam@ravnborg.org>
parent 4f1127e2
...@@ -758,7 +758,7 @@ config BFIN_DMA_5XX ...@@ -758,7 +758,7 @@ config BFIN_DMA_5XX
choice choice
prompt "Uncached SDRAM region" prompt "Uncached SDRAM region"
default DMA_UNCACHED_1M default DMA_UNCACHED_1M
depends BFIN_DMA_5XX depends on BFIN_DMA_5XX
config DMA_UNCACHED_2M config DMA_UNCACHED_2M
bool "Enable 2M DMA region" bool "Enable 2M DMA region"
config DMA_UNCACHED_1M config DMA_UNCACHED_1M
......
...@@ -144,7 +144,7 @@ config BDI_SWITCH ...@@ -144,7 +144,7 @@ config BDI_SWITCH
config BOOTX_TEXT config BOOTX_TEXT
bool "Support for early boot text console (BootX or OpenFirmware only)" bool "Support for early boot text console (BootX or OpenFirmware only)"
depends PPC_OF && PPC_MULTIPLATFORM depends on PPC_OF && PPC_MULTIPLATFORM
help help
Say Y here to see progress messages from the boot firmware in text Say Y here to see progress messages from the boot firmware in text
mode. Requires either BootX or Open Firmware. mode. Requires either BootX or Open Firmware.
...@@ -234,12 +234,12 @@ endchoice ...@@ -234,12 +234,12 @@ endchoice
config PPC_EARLY_DEBUG_44x_PHYSLOW config PPC_EARLY_DEBUG_44x_PHYSLOW
hex "Low 32 bits of early debug UART physical address" hex "Low 32 bits of early debug UART physical address"
depends PPC_EARLY_DEBUG_44x depends on PPC_EARLY_DEBUG_44x
default "0x40000200" default "0x40000200"
config PPC_EARLY_DEBUG_44x_PHYSHIGH config PPC_EARLY_DEBUG_44x_PHYSHIGH
hex "EPRN of early debug UART physical address" hex "EPRN of early debug UART physical address"
depends PPC_EARLY_DEBUG_44x depends on PPC_EARLY_DEBUG_44x
default "0x1" default "0x1"
config PPC_EARLY_DEBUG_CPM_ADDR config PPC_EARLY_DEBUG_CPM_ADDR
......
...@@ -117,7 +117,7 @@ config RTAS_FLASH ...@@ -117,7 +117,7 @@ config RTAS_FLASH
config PPC_PMI config PPC_PMI
tristate "Support for PMI" tristate "Support for PMI"
depends PPC_IBM_CELL_BLADE depends on PPC_IBM_CELL_BLADE
help help
PMI (Platform Management Interrupt) is a way to PMI (Platform Management Interrupt) is a way to
communicate with the BMC (Baseboard Mangement Controller). communicate with the BMC (Baseboard Mangement Controller).
......
...@@ -152,7 +152,7 @@ config INPUT_POWERMATE ...@@ -152,7 +152,7 @@ config INPUT_POWERMATE
config INPUT_YEALINK config INPUT_YEALINK
tristate "Yealink usb-p1k voip phone" tristate "Yealink usb-p1k voip phone"
depends EXPERIMENTAL depends on EXPERIMENTAL
depends on USB_ARCH_HAS_HCD depends on USB_ARCH_HAS_HCD
select USB select USB
help help
......
...@@ -83,7 +83,7 @@ config LEDS_WRAP ...@@ -83,7 +83,7 @@ config LEDS_WRAP
config LEDS_H1940 config LEDS_H1940
tristate "LED Support for iPAQ H1940 device" tristate "LED Support for iPAQ H1940 device"
depends LEDS_CLASS && ARCH_H1940 depends on LEDS_CLASS && ARCH_H1940
help help
This option enables support for the LEDs on the h1940. This option enables support for the LEDs on the h1940.
......
...@@ -19,7 +19,7 @@ if PHONE ...@@ -19,7 +19,7 @@ if PHONE
config PHONE_IXJ config PHONE_IXJ
tristate "QuickNet Internet LineJack/PhoneJack support" tristate "QuickNet Internet LineJack/PhoneJack support"
depends ISA || PCI depends on ISA || PCI
---help--- ---help---
Say M if you have a telephony card manufactured by Quicknet Say M if you have a telephony card manufactured by Quicknet
Technologies, Inc. These include the Internet PhoneJACK and Technologies, Inc. These include the Internet PhoneJACK and
......
...@@ -23,7 +23,6 @@ help, T_HELP, TF_COMMAND ...@@ -23,7 +23,6 @@ help, T_HELP, TF_COMMAND
if, T_IF, TF_COMMAND|TF_PARAM if, T_IF, TF_COMMAND|TF_PARAM
endif, T_ENDIF, TF_COMMAND endif, T_ENDIF, TF_COMMAND
depends, T_DEPENDS, TF_COMMAND depends, T_DEPENDS, TF_COMMAND
requires, T_REQUIRES, TF_COMMAND
optional, T_OPTIONAL, TF_COMMAND optional, T_OPTIONAL, TF_COMMAND
default, T_DEFAULT, TF_COMMAND, S_UNKNOWN default, T_DEFAULT, TF_COMMAND, S_UNKNOWN
prompt, T_PROMPT, TF_COMMAND prompt, T_PROMPT, TF_COMMAND
...@@ -32,7 +31,6 @@ def_tristate, T_DEFAULT, TF_COMMAND, S_TRISTATE ...@@ -32,7 +31,6 @@ def_tristate, T_DEFAULT, TF_COMMAND, S_TRISTATE
bool, T_TYPE, TF_COMMAND, S_BOOLEAN bool, T_TYPE, TF_COMMAND, S_BOOLEAN
boolean, T_TYPE, TF_COMMAND, S_BOOLEAN boolean, T_TYPE, TF_COMMAND, S_BOOLEAN
def_bool, T_DEFAULT, TF_COMMAND, S_BOOLEAN def_bool, T_DEFAULT, TF_COMMAND, S_BOOLEAN
def_boolean, T_DEFAULT, TF_COMMAND, S_BOOLEAN
int, T_TYPE, TF_COMMAND, S_INT int, T_TYPE, TF_COMMAND, S_INT
hex, T_TYPE, TF_COMMAND, S_HEX hex, T_TYPE, TF_COMMAND, S_HEX
string, T_TYPE, TF_COMMAND, S_STRING string, T_TYPE, TF_COMMAND, S_STRING
......
...@@ -64,7 +64,6 @@ static struct menu *current_menu, *current_entry; ...@@ -64,7 +64,6 @@ static struct menu *current_menu, *current_entry;
%token <id>T_IF %token <id>T_IF
%token <id>T_ENDIF %token <id>T_ENDIF
%token <id>T_DEPENDS %token <id>T_DEPENDS
%token <id>T_REQUIRES
%token <id>T_OPTIONAL %token <id>T_OPTIONAL
%token <id>T_PROMPT %token <id>T_PROMPT
%token <id>T_TYPE %token <id>T_TYPE
...@@ -418,16 +417,6 @@ depends: T_DEPENDS T_ON expr T_EOL ...@@ -418,16 +417,6 @@ depends: T_DEPENDS T_ON expr T_EOL
{ {
menu_add_dep($3); menu_add_dep($3);
printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno()); printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno());
}
| T_DEPENDS expr T_EOL
{
menu_add_dep($2);
printd(DEBUG_PARSE, "%s:%d:depends\n", zconf_curname(), zconf_lineno());
}
| T_REQUIRES expr T_EOL
{
menu_add_dep($2);
printd(DEBUG_PARSE, "%s:%d:requires\n", zconf_curname(), zconf_lineno());
}; };
/* prompt statement */ /* prompt statement */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment