Commit 24e394b0 authored by Egor Uleyskiy's avatar Egor Uleyskiy Committed by Greg Kroah-Hartman

drivers: staging: vme: Fixed indention

Signed-off-by: default avatarEgor Uleyskiy <egor.ulieiskii@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 7f608097
......@@ -61,7 +61,7 @@ int pio2_cntr_reset(struct pio2_card *card)
/* Ensure all counter interrupts are cleared */
do {
retval = vme_master_read(card->window, &reg, 1,
PIO2_REGS_INT_STAT_CNTR);
PIO2_REGS_INT_STAT_CNTR);
if (retval < 0)
return retval;
} while (reg != 0);
......
......@@ -90,7 +90,7 @@ static void pio2_int(int level, int vector, void *ptr)
case 4:
/* Channels 0 to 7 */
retval = vme_master_read(card->window, &reg, 1,
PIO2_REGS_INT_STAT[vec - 1]);
PIO2_REGS_INT_STAT[vec - 1]);
if (retval < 0) {
dev_err(&card->vdev->dev,
"Unable to read IRQ status register\n");
......@@ -100,8 +100,8 @@ static void pio2_int(int level, int vector, void *ptr)
channel = ((vec - 1) * 8) + i;
if (reg & PIO2_CHANNEL_BIT[channel])
dev_info(&card->vdev->dev,
"Interrupt on I/O channel %d\n",
channel);
"Interrupt on I/O channel %d\n",
channel);
}
break;
case 5:
......@@ -289,7 +289,7 @@ static int pio2_probe(struct vme_dev *vdev)
}
retval = vme_master_set(card->window, 1, card->base, 0x10000, VME_A24,
(VME_SCT | VME_USER | VME_DATA), VME_D16);
(VME_SCT | VME_USER | VME_DATA), VME_D16);
if (retval) {
dev_err(&card->vdev->dev,
"Unable to configure VME master resource\n");
......@@ -335,7 +335,7 @@ static int pio2_probe(struct vme_dev *vdev)
/* Set VME vector */
retval = vme_master_write(card->window, &card->irq_vector, 1,
PIO2_REGS_VME_VECTOR);
PIO2_REGS_VME_VECTOR);
if (retval < 0)
return retval;
......@@ -343,7 +343,7 @@ static int pio2_probe(struct vme_dev *vdev)
vec = card->irq_vector | PIO2_VME_VECTOR_SPUR;
retval = vme_irq_request(vdev, card->irq_level, vec,
&pio2_int, (void *)card);
&pio2_int, (void *)card);
if (retval < 0) {
dev_err(&card->vdev->dev,
"Unable to attach VME interrupt vector0x%x, level 0x%x\n",
......@@ -356,7 +356,7 @@ static int pio2_probe(struct vme_dev *vdev)
vec = card->irq_vector | PIO2_VECTOR_BANK[i];
retval = vme_irq_request(vdev, card->irq_level, vec,
&pio2_int, (void *)card);
&pio2_int, (void *)card);
if (retval < 0) {
dev_err(&card->vdev->dev,
"Unable to attach VME interrupt vector0x%x, level 0x%x\n",
......@@ -397,7 +397,7 @@ static int pio2_probe(struct vme_dev *vdev)
dev_set_drvdata(&card->vdev->dev, card);
dev_info(&card->vdev->dev,
"PIO2 (variant %s) configured at 0x%lx\n", card->variant,
"PIO2 (variant %s) configured at 0x%lx\n", card->variant,
card->base);
return 0;
......
......@@ -37,14 +37,14 @@ static int pio2_gpio_get(struct gpio_chip *chip, unsigned int offset)
struct pio2_card *card = gpio_to_pio2_card(chip);
if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == OUTPUT) |
(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
dev_err(&card->vdev->dev, "Channel not available as input\n");
return 0;
}
retval = vme_master_read(card->window, &reg, 1,
PIO2_REGS_DATA[PIO2_CHANNEL_BANK[offset]]);
PIO2_REGS_DATA[PIO2_CHANNEL_BANK[offset]]);
if (retval < 0) {
dev_err(&card->vdev->dev, "Unable to read from GPIO\n");
return 0;
......@@ -67,15 +67,15 @@ static int pio2_gpio_get(struct gpio_chip *chip, unsigned int offset)
return 0;
}
static void pio2_gpio_set(struct gpio_chip *chip, unsigned int offset,
int value)
static void pio2_gpio_set(struct gpio_chip *chip,
unsigned int offset, int value)
{
u8 reg;
int retval;
struct pio2_card *card = gpio_to_pio2_card(chip);
if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == INPUT) |
(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
dev_err(&card->vdev->dev, "Channel not available as output\n");
return;
......@@ -89,7 +89,7 @@ static void pio2_gpio_set(struct gpio_chip *chip, unsigned int offset,
~PIO2_CHANNEL_BIT[offset];
retval = vme_master_write(card->window, &reg, 1,
PIO2_REGS_DATA[PIO2_CHANNEL_BANK[offset]]);
PIO2_REGS_DATA[PIO2_CHANNEL_BANK[offset]]);
if (retval < 0) {
dev_err(&card->vdev->dev, "Unable to write to GPIO\n");
return;
......@@ -105,7 +105,7 @@ static int pio2_gpio_dir_in(struct gpio_chip *chip, unsigned offset)
struct pio2_card *card = gpio_to_pio2_card(chip);
if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == OUTPUT) |
(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
dev_err(&card->vdev->dev,
"Channel directionality not configurable at runtime\n");
......@@ -124,7 +124,7 @@ static int pio2_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int value)
struct pio2_card *card = gpio_to_pio2_card(chip);
if ((card->bank[PIO2_CHANNEL_BANK[offset]].config == INPUT) |
(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
(card->bank[PIO2_CHANNEL_BANK[offset]].config == NOFIT)) {
dev_err(&card->vdev->dev,
"Channel directionality not configurable at runtime\n");
......@@ -150,7 +150,7 @@ int pio2_gpio_reset(struct pio2_card *card)
/* Zero output registers */
for (i = 0; i < 4; i++) {
retval = vme_master_write(card->window, &data, 1,
PIO2_REGS_DATA[i]);
PIO2_REGS_DATA[i]);
if (retval < 0)
return retval;
card->bank[i].value = 0;
......@@ -159,12 +159,12 @@ int pio2_gpio_reset(struct pio2_card *card)
/* Set input interrupt masks */
for (i = 0; i < 4; i++) {
retval = vme_master_write(card->window, &data, 1,
PIO2_REGS_INT_MASK[i * 2]);
PIO2_REGS_INT_MASK[i * 2]);
if (retval < 0)
return retval;
retval = vme_master_write(card->window, &data, 1,
PIO2_REGS_INT_MASK[(i * 2) + 1]);
PIO2_REGS_INT_MASK[(i * 2) + 1]);
if (retval < 0)
return retval;
......@@ -176,7 +176,7 @@ int pio2_gpio_reset(struct pio2_card *card)
for (i = 0; i < 4; i++) {
do {
retval = vme_master_read(card->window, &data, 1,
PIO2_REGS_INT_STAT[i]);
PIO2_REGS_INT_STAT[i]);
if (retval < 0)
return retval;
} while (data != 0);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment