usb: dwc2: Fix a bug in reading the endpoint directions from reg.

According to  the DWC2 datasheet, the HWCFG1 register stores
the configured endpoint directions for endpoints 0-15 in bit positions
0-31.
==========================
Endpoint Direction (EpDir)
This 32-bit field uses two bits per endpoint to determine the endpoint
direction.
Endpoint
Bits [31:30]: Endpoint 15 direction
Bits [29:28]: Endpoint 14 direction
....
Bits [3:2]: Endpoint 1 direction
Bits[1:0]: Endpoint 0 direction (always BIDIR)
==========================

The DWC2 driver is currently interpreting the contents of the register
as directions for endpoints 1-15 which leads to an error in determining
the configured endpoint directions in the core because the first 2 bits
determine the direction of endpoint 0 and not 1.

This is based on testing/next branch in Felipe's git.
Signed-off-by: Roshan Pius <rpius@chromium.org>
Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>

drivers/usb/dwc2/gadget.c

@@ -3308,7 +3308,7 @@ static int s3c_hsotg_hw_cfg(struct dwc2_hsotg *hsotg)
 	hsotg->eps_out[0] = hsotg->eps_in[0];
 
 	cfg = readl(hsotg->regs + GHWCFG1);
-	for (i = 1; i < hsotg->num_of_eps; i++, cfg >>= 2) {
+	for (i = 1, cfg >>= 2; i < hsotg->num_of_eps; i++, cfg >>= 2) {
 		ep_type = cfg & 3;
 		/* Direction in or both */
 		if (!(ep_type & 2)) {