wlcore: remove WLCORE_QUIRK_NO_ELP

all the current firmwares support elp, so
we can safely remove WLCORE_QUIRK_NO_ELP.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

drivers/net/wireless/ti/wl18xx/main.c

@@ -639,8 +639,7 @@ static int wl18xx_identify_chip(struct wl1271 *wl)
 		wl->sr_fw_name = WL18XX_FW_NAME;
 		/* wl18xx uses the same firmware for PLT */
 		wl->plt_fw_name = WL18XX_FW_NAME;
-		wl->quirks |= WLCORE_QUIRK_NO_ELP |
-			      WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN |
+		wl->quirks |= WLCORE_QUIRK_RX_BLOCKSIZE_ALIGN |
 			      WLCORE_QUIRK_TX_BLOCKSIZE_ALIGN |
 			      WLCORE_QUIRK_NO_SCHED_SCAN_WHILE_CONN |
 			      WLCORE_QUIRK_TX_PAD_LAST_FRAME |

drivers/net/wireless/ti/wlcore/init.c

@@ -577,9 +577,6 @@ int wl1271_init_vif_specific(struct wl1271 *wl, struct ieee80211_vif *vif)
 		/* Configure for power according to debugfs */
 		if (sta_auth != WL1271_PSM_ILLEGAL)
 			ret = wl1271_acx_sleep_auth(wl, sta_auth);
-		/* Configure for power always on */
-		else if (wl->quirks & WLCORE_QUIRK_NO_ELP)
-			ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
 		/* Configure for ELP power saving */
 		else
 			ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP);

drivers/net/wireless/ti/wlcore/main.c

@@ -2482,9 +2482,6 @@ static void __wl1271_op_remove_interface(struct wl1271 *wl,
 		/* Configure for power according to debugfs */
 		if (sta_auth != WL1271_PSM_ILLEGAL)
 			wl1271_acx_sleep_auth(wl, sta_auth);
-		/* Configure for power always on */
-		else if (wl->quirks & WLCORE_QUIRK_NO_ELP)
-			wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
 		/* Configure for ELP power saving */
 		else
 			wl1271_acx_sleep_auth(wl, WL1271_PSM_ELP);

drivers/net/wireless/ti/wlcore/wlcore.h

@@ -515,9 +515,6 @@ wlcore_set_min_fw_ver(struct wl1271 *wl, unsigned int chip,
 /* Older firmwares use an old NVS format */
 #define WLCORE_QUIRK_LEGACY_NVS			BIT(5)
 
-/* Some firmwares may not support ELP */
-#define WLCORE_QUIRK_NO_ELP			BIT(6)
-
 /* pad only the last frame in the aggregate buffer */
 #define WLCORE_QUIRK_TX_PAD_LAST_FRAME		BIT(7)