Commit 28c426c7 authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branch 'regulator/topic/axp20x' into regulator-next

parents 46294d66 ad92ceaf
......@@ -244,6 +244,7 @@ static const struct regulator_desc axp22x_drivevbus_regulator = {
.ops = &axp20x_ops_sw,
};
/* DCDC ranges shared with AXP813 */
static const struct regulator_linear_range axp803_dcdc234_ranges[] = {
REGULATOR_LINEAR_RANGE(500000, 0x0, 0x46, 10000),
REGULATOR_LINEAR_RANGE(1220000, 0x47, 0x4b, 20000),
......@@ -426,6 +427,69 @@ static const struct regulator_desc axp809_regulators[] = {
AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
};
static const struct regulator_desc axp813_regulators[] = {
AXP_DESC(AXP813, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
AXP803_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(0)),
AXP_DESC_RANGES(AXP813, DCDC2, "dcdc2", "vin2", axp803_dcdc234_ranges,
76, AXP803_DCDC2_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
BIT(1)),
AXP_DESC_RANGES(AXP813, DCDC3, "dcdc3", "vin3", axp803_dcdc234_ranges,
76, AXP803_DCDC3_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
BIT(2)),
AXP_DESC_RANGES(AXP813, DCDC4, "dcdc4", "vin4", axp803_dcdc234_ranges,
76, AXP803_DCDC4_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
BIT(3)),
AXP_DESC_RANGES(AXP813, DCDC5, "dcdc5", "vin5", axp803_dcdc5_ranges,
68, AXP803_DCDC5_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
BIT(4)),
AXP_DESC_RANGES(AXP813, DCDC6, "dcdc6", "vin6", axp803_dcdc6_ranges,
72, AXP803_DCDC6_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
BIT(5)),
AXP_DESC_RANGES(AXP813, DCDC7, "dcdc7", "vin7", axp803_dcdc6_ranges,
72, AXP813_DCDC7_V_OUT, 0x7f, AXP22X_PWR_OUT_CTRL1,
BIT(6)),
AXP_DESC(AXP813, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(5)),
AXP_DESC(AXP813, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(6)),
AXP_DESC(AXP813, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL3, BIT(7)),
AXP_DESC(AXP813, DLDO1, "dldo1", "dldoin", 700, 3300, 100,
AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(3)),
AXP_DESC_RANGES(AXP813, DLDO2, "dldo2", "dldoin", axp803_dldo2_ranges,
32, AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
BIT(4)),
AXP_DESC(AXP813, DLDO3, "dldo3", "dldoin", 700, 3300, 100,
AXP22X_DLDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
AXP_DESC(AXP813, DLDO4, "dldo4", "dldoin", 700, 3300, 100,
AXP22X_DLDO4_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(6)),
AXP_DESC(AXP813, ELDO1, "eldo1", "eldoin", 700, 1900, 50,
AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
AXP_DESC(AXP813, ELDO2, "eldo2", "eldoin", 700, 1900, 50,
AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
AXP_DESC(AXP813, ELDO3, "eldo3", "eldoin", 700, 1900, 50,
AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
/* to do / check ... */
AXP_DESC(AXP813, FLDO1, "fldo1", "fldoin", 700, 1450, 50,
AXP803_FLDO1_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(2)),
AXP_DESC(AXP813, FLDO2, "fldo2", "fldoin", 700, 1450, 50,
AXP803_FLDO2_V_OUT, 0x0f, AXP22X_PWR_OUT_CTRL3, BIT(3)),
/*
* TODO: FLDO3 = {DCDC5, FLDOIN} / 2
*
* This means FLDO3 effectively switches supplies at runtime,
* something the regulator subsystem does not support.
*/
AXP_DESC_FIXED(AXP813, RTC_LDO, "rtc-ldo", "ips", 1800),
AXP_DESC_IO(AXP813, LDO_IO0, "ldo-io0", "ips", 700, 3300, 100,
AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_IO(AXP813, LDO_IO1, "ldo-io1", "ips", 700, 3300, 100,
AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
AXP_DESC_SW(AXP813, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(7)),
};
static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
{
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
......@@ -441,9 +505,10 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
step = 75;
break;
case AXP803_ID:
case AXP813_ID:
/*
* AXP803 DCDC work frequency setting has the same range and
* step as AXP22X, but at a different register.
* AXP803/AXP813 DCDC work frequency setting has the same
* range and step as AXP22X, but at a different register.
* Fall through to the check below.
* (See include/linux/mfd/axp20x.h)
*/
......@@ -561,6 +626,14 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
workmode <<= id - AXP803_DCDC1;
break;
case AXP813_ID:
if (id < AXP813_DCDC1 || id > AXP813_DCDC7)
return -EINVAL;
mask = AXP22X_WORKMODE_DCDCX_MASK(id - AXP813_DCDC1);
workmode <<= id - AXP813_DCDC1;
break;
default:
/* should not happen */
WARN_ON(1);
......@@ -579,11 +652,12 @@ static bool axp20x_is_polyphase_slave(struct axp20x_dev *axp20x, int id)
u32 reg = 0;
/*
* Currently in our supported AXP variants, only AXP803 and AXP806
* have polyphase regulators.
* Currently in our supported AXP variants, only AXP803, AXP806,
* and AXP813 have polyphase regulators.
*/
switch (axp20x->variant) {
case AXP803_ID:
case AXP813_ID:
regmap_read(axp20x->regmap, AXP803_POLYPHASE_CTRL, &reg);
switch (id) {
......@@ -656,6 +730,12 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
regulators = axp809_regulators;
nregulators = AXP809_REG_ID_MAX;
break;
case AXP813_ID:
regulators = axp813_regulators;
nregulators = AXP813_REG_ID_MAX;
drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
"x-powers,drive-vbus-en");
break;
default:
dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
axp20x->variant);
......@@ -677,6 +757,10 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
if (axp20x_is_polyphase_slave(axp20x, i))
continue;
/* Support for AXP813's FLDO3 is not implemented */
if (axp20x->variant == AXP813_ID && i == AXP813_FLDO3)
continue;
/*
* Regulators DC1SW and DC5LDO are connected internally,
* so we have to handle their supply names separately.
......
......@@ -131,6 +131,9 @@ enum axp20x_variants {
#define AXP803_DCDC6_V_OUT 0x25
#define AXP803_DCDC_FREQ_CTRL 0x3b
/* Other DCDC regulator control registers are the same as AXP803 */
#define AXP813_DCDC7_V_OUT 0x26
/* Interrupt */
#define AXP152_IRQ1_EN 0x40
#define AXP152_IRQ2_EN 0x41
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment